openwrt/target/linux/ath79/dts/ar9331_hak5_lan-turtle.dts

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT

#include "ar9331_hak5_lan-turtle.dtsi"

/ {
	model = "Hak5 LAN Turtle";
	compatible = "hak5,lan-turtle", "qca,ar9331";

	aliases {
		led-boot = &led_system;
		led-failsafe = &led_system;
		led-upgrade = &led_system;
	};

	leds {
		compatible = "gpio-leds";

		pinctrl-names = "default";
		pinctrl-0 = <&switch_led_disable_pins>;

		led_system: system {
			label = "lan-turtle:orange:system";
			gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
		};
	};
};
ath79: add support for Hak5 LAN Turtle Hak5 LAN Turtle is an "USB Ethernet Adapter" shaped device dedicated for sysadmins and pentesters. This device is based on Atheros AR9331 but it lacks WiFi. Support for it was first introduced in 950b278c81 (ar71xx). Two different versions of this device exist and it's up to the user to install required drivers (generic image supports only common features): - LAN Turtle 3G with Quectel UG96 3G modem - LAN Turtle SD with microSD card reader (Alcorlink AU6435R) Specifications: - Atheros AR9331 - 400/400/200 MHz (CPU/DDR/AHB) - 64 MB of RAM (DDR2) - 16 MB of flash (SPI NOR) - 1x RJ45 10/100 Mbps Ethernet (AR9331) - 1x USB 2.0 to 10/100 Ethernet bridge (Realtek RTL8152B) - 2x LED (power, system), 1x button (inside, on the PCB) - USB 2.0 Type-A plug for power and RTL8152B Flash instruction: You can use sysupgrade image directly in vendor firmware which is based on OpenWrt/LEDE. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> Signed-off-by: maurerr <mariusd84@gmail.com> 2020-08-19 12:20:54 +00:00			`// SPDX-License-Identifier: GPL-2.0-or-later OR MIT`

ath79: add support for Hak5 Packet Squirrel Hak5 Packet Squirrel is a pocket-sized device dedicated for pentesters (MITM attacks). This device is based on Atheros AR9331 but it lacks WiFi. Support for it was first introduced in 950b278c81 (ar71xx). Specifications: - Atheros AR9331 - 400/400/200 MHz (CPU/DDR/AHB) - 64 MB of RAM (DDR2) - 16 MB of flash (SPI NOR) - 2x RJ45 10/100 Mbps Ethernet (AR9331) - 1x USB 2.0 - 1x RGB LED, 1x button, 1x 4-way mechanical switch - 1x Micro USB Type-B for main power input Flash instruction: You can use sysupgrade image directly in vendor firmware which is based on OpenWrt/LEDE. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> Signed-off-by: maurerr <mariusd84@gmail.com> 2020-08-19 13:10:04 +00:00			`#include "ar9331_hak5_lan-turtle.dtsi"`
ath79: add support for Hak5 LAN Turtle Hak5 LAN Turtle is an "USB Ethernet Adapter" shaped device dedicated for sysadmins and pentesters. This device is based on Atheros AR9331 but it lacks WiFi. Support for it was first introduced in 950b278c81 (ar71xx). Two different versions of this device exist and it's up to the user to install required drivers (generic image supports only common features): - LAN Turtle 3G with Quectel UG96 3G modem - LAN Turtle SD with microSD card reader (Alcorlink AU6435R) Specifications: - Atheros AR9331 - 400/400/200 MHz (CPU/DDR/AHB) - 64 MB of RAM (DDR2) - 16 MB of flash (SPI NOR) - 1x RJ45 10/100 Mbps Ethernet (AR9331) - 1x USB 2.0 to 10/100 Ethernet bridge (Realtek RTL8152B) - 2x LED (power, system), 1x button (inside, on the PCB) - USB 2.0 Type-A plug for power and RTL8152B Flash instruction: You can use sysupgrade image directly in vendor firmware which is based on OpenWrt/LEDE. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> Signed-off-by: maurerr <mariusd84@gmail.com> 2020-08-19 12:20:54 +00:00
			`/ {`
			`model = "Hak5 LAN Turtle";`
			`compatible = "hak5,lan-turtle", "qca,ar9331";`

			`aliases {`
			`led-boot = &led_system;`
			`led-failsafe = &led_system;`
			`led-upgrade = &led_system;`
			`};`

			`leds {`
			`compatible = "gpio-leds";`

			`pinctrl-names = "default";`
			`pinctrl-0 = <&switch_led_disable_pins>;`

			`led_system: system {`
			`label = "lan-turtle:orange:system";`
			`gpios = <&gpio 13 GPIO_ACTIVE_LOW>;`
			`};`
			`};`
			`};`