openwrt/target/linux/octeon/base-files/lib/preinit/01_sysinfo

do_sysinfo_octeon() {
	local machine
	local name

	machine=$(grep "^system type" /proc/cpuinfo | sed "s/system type.*: \(.*\)/\1/g")

	case "$machine" in
	"UBNT_E100"*)
		name="erlite"
		;;

	"UBNT_E200"*)
		name="er"
		;;

	"UBNT_E220"*)
		name="erpro"
		;;

	"UBNT_E300"*)
		# let generic 02_sysinfo handle it since device has its own device tree
		return 0
		;;

	"ITUS_SHIELD"*)
		name="itus,shield-router"
		;;

	*)
		name="generic"
		;;
	esac

	[ -e "/tmp/sysinfo/" ] || mkdir -p "/tmp/sysinfo/"

	echo "$name" > /tmp/sysinfo/board_name
	echo "$machine" > /tmp/sysinfo/model
}

boot_hook_add preinit_main do_sysinfo_octeon
octeon: get rid of /lib/functions/octeon.sh hackery, use sysinfo directly Fixes sysupgrade Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48558 2016-01-29 23:19:41 +00:00			`do_sysinfo_octeon() {`
			`local machine`
			`local name`

			`machine=$(grep "^system type" /proc/cpuinfo \| sed "s/system type.: \(.\)/\1/g")`

			`case "$machine" in`
			`"UBNT_E100"*)`
			`name="erlite"`
			`;;`

			`"UBNT_E200"*)`
			`name="er"`
			`;;`

			`"UBNT_E220"*)`
			`name="erpro"`
			`;;`

octeon: add support for Ubiquiti EdgeRouter 4 Ubiquiti EdgeRouter 4 is 4 port Octeon Cavium 7130 powered router. It has internal power supply and needs c13 power cord. There are three 10/100/1000 Mbps RJ45/Copper ports and one 1000 Mbps SFP port connected directly to a SoC. SoC: Octeon Cavium 7130 (Cavium 3) Clocked at 1000Mhz Memory: 1 GiB (SK hynix H5TQ4G63CFR-RDC × 2) DDR3, clocked at 533 Mhz (1066Mhz effective) Flash: - mtd: 8 MiB (Macronix MX25L6408EMI-12G) used for uboot/eeprom - emmc: 4 GiB (SanDisk SDIN7DP2-4G) used for kernel+rootfs Leds: 1x for power status (white/blue, controllable) and 4x for ethernet and sfp ports (no control over them) Buttons: 1x Reset (from SOC) Serial: 1x RJ45 port on front panel. 115200 baud, 8N1 (from SoC) USB: 1x USB3.0 on front panel (from SoC) MII: 1x QSGMII from SoC is used PHY: 1x Vitesse VSC8504 of which 4x ports is used All physical port numbers are properly mapped inside OS and named by lanX instead of ethX. There is also special purpose four(4) loopX ports available. That loopX ports are currently hardcoded by linux kernel and exact use case of them is currently unknown. We leave them to the linux kernel and octeon board defaults. All four (4) physical ports are connected to the same QSGMII. vsc8504 is used for phys and only 4, 5, 6 and 7 phys are used. Phy mapping: - Phy5 is connected to physical eth0 port - Phy6 is connected to physical eth1 port - Phy7 is connected to physical eth2 port - Phy4 is connected to physical eth3 port Why this device needs external dts: - faster boot time since need to initialize less device tree nodes. - to add actual indication with LED about boot/failure/upgrade. i.e. user could know when to enter failsafe mode or if upgrade is done - reset button support so user can reset their device in case off failure - sfp port indication in dmesg with information about sfp module it also indicates when module inserted or removed Octeon quirks: - There is no port status available before it interface brought up - SFP port can not be tied to actual phy due to octeon-ethernet state and currently we can only get reports a about SFP state in dmesg How to flash the firmware: - copy openwrt-octeon-ubnt_edgerouter-4-initramfs-kernel.bin and openwrt-octeon-ubnt_edgerouter-4-squashfs-sysupgrade.tar to USB flash drive that is formatted to vfat/fat32 - connect USB flash drive to edgerouter 4 front USB port - connect serial cable using front RJ45 port (115200 baud, 8N1) - connect power to cable to edgerouter 4 - connect terminal to the console to see uboot boot process - interrupt boot by pressing button(s) on your keyboard to log in to the uboot - detect usb connected flash drives by typing to the console: usb start - after drive is detected load initramfs+kernel to the memory by typing: fatload usb 0:1 0x20000000 openwrt-octeon-ubnt_edgerouter-4-initramfs-kernel.bin - after initramfs+kernel is loaded to the memory load it by typing: bootoctlinux 0 numcores=4 endbootargs mem=0 - boot process should finish and you will be greeted with console after pressing enter - create directory to mount usb flash drive to by typing: mkdir /tmp/sda - mount flash drive to that directory by typing: mount /dev/sda1 /tmp/sda - flash firmware to router internal storage by typing: sysupgrade /tmp/sda/openwrt-octeon-ubnt_edgerouter-4-squashfs-sysupgrade.tar - device will reboot and after it gets up you will have edgerouter 4 running openwrt Reviewed-by: Johannes Kimmel <fff@bareminimum.eu> Tested-by: Johannes Kimmel <fff@bareminimum.eu> Signed-off-by: Roman Kuzmitskii <damex.pp@icloud.com> 2020-10-22 21:20:05 +00:00			`"UBNT_E300"*)`
			`# let generic 02_sysinfo handle it since device has its own device tree`
			`return 0`
			`;;`

octeon: add support for Itus Shield Router Itus Networks Shield - 1Ghz dual-core mips64 / Cavium Octeon 3 SoC, 1Gb RAM, 4Gb eMMC,3 GbE 10/100/1000 ports Information regarding device can be found: https://deviwiki.com/wiki/Itus_Networks_Shield_Pro Installing OpenWrt on Itus Networks Shield: 1) Boot Shield 2) On device: mount /dev/mmcblk1p1 /mnt 3) scp openwrt-octeon-itus,shield-router-initramfs-kernel.bin to /mnt/ItusrouterImage 3a) Optionally: scp openwrt-octeon-itus,shield-router-initramfs-kernel.bin to /mnt/ItusgatewayImage to allow you to have an emergency recovery boot in the GATEWAY slot - this slot will have no permament storage and is used for emergency recovery only when booted in the (G)ateway position 4) On device: umount /mnt 5) reboot Once booted, run the sysupgrade via cli or luCi on the openwrt-octeon-itus,shield-router-squashfs-sysupgrade.tar file the mode you are running. Once rebooted, the system installation is complete. Your storage partition for the mode is inialized and set. Signed-off-by: Donald Hoskins <grommish@gmail.com> [cut out sysupgrade-* changes, move a few lines, drop case CVMX_BOARD_TYPE_ITUS_SHIELD] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> 2020-07-22 05:26:33 -04:00			`"ITUS_SHIELD"*)`
			`name="itus,shield-router"`
			`;;`

octeon: get rid of /lib/functions/octeon.sh hackery, use sysinfo directly Fixes sysupgrade Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48558 2016-01-29 23:19:41 +00:00			`*)`
			`name="generic"`
			`;;`
			`esac`

			`[ -e "/tmp/sysinfo/" ] \|\| mkdir -p "/tmp/sysinfo/"`

			`echo "$name" > /tmp/sysinfo/board_name`
			`echo "$machine" > /tmp/sysinfo/model`
			`}`

			`boot_hook_add preinit_main do_sysinfo_octeon`