openwrt/package/mac80211/patches/300-pending_work.patch

880 lines
29 KiB
Diff
Raw Normal View History

--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -1171,7 +1171,7 @@ ath5k_check_ibss_tsf(struct ath5k_hw *ah
if (ieee80211_is_beacon(mgmt->frame_control) &&
le16_to_cpu(mgmt->u.beacon.capab_info) & WLAN_CAPABILITY_IBSS &&
- memcmp(mgmt->bssid, common->curbssid, ETH_ALEN) == 0) {
+ compare_ether_addr(mgmt->bssid, common->curbssid) == 0) {
/*
* Received an IBSS beacon with the same BSSID. Hardware *must*
* have updated the local TSF. We have to work around various
@@ -1235,7 +1235,7 @@ ath5k_update_beacon_rssi(struct ath5k_hw
/* only beacons from our BSSID */
if (!ieee80211_is_beacon(mgmt->frame_control) ||
- memcmp(mgmt->bssid, common->curbssid, ETH_ALEN) != 0)
+ compare_ether_addr(mgmt->bssid, common->curbssid) != 0)
return;
ewma_add(&ah->ah_beacon_rssi_avg, rssi);
@@ -2416,6 +2416,22 @@ ath5k_tx_complete_poll_work(struct work_
* Initialization routines *
\*************************/
+static const struct ieee80211_iface_limit if_limits[] = {
+ { .max = 2048, .types = BIT(NL80211_IFTYPE_STATION) },
+ { .max = 4, .types =
+#ifdef CONFIG_MAC80211_MESH
+ BIT(NL80211_IFTYPE_MESH_POINT) |
+#endif
+ BIT(NL80211_IFTYPE_AP) },
+};
+
+static const struct ieee80211_iface_combination if_comb = {
+ .limits = if_limits,
+ .n_limits = ARRAY_SIZE(if_limits),
+ .max_interfaces = 2048,
+ .num_different_channels = 1,
+};
+
int __devinit
ath5k_init_ah(struct ath5k_hw *ah, const struct ath_bus_ops *bus_ops)
{
@@ -2437,6 +2453,9 @@ ath5k_init_ah(struct ath5k_hw *ah, const
BIT(NL80211_IFTYPE_ADHOC) |
BIT(NL80211_IFTYPE_MESH_POINT);
+ hw->wiphy->iface_combinations = &if_comb;
+ hw->wiphy->n_iface_combinations = 1;
+
/* SW support for IBSS_RSN is provided by mac80211 */
hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN;
--- a/drivers/net/wireless/ath/ath9k/ani.c
+++ b/drivers/net/wireless/ath/ath9k/ani.c
@@ -274,7 +274,9 @@ static void ath9k_hw_set_ofdm_nil(struct
aniState->rssiThrLow, aniState->rssiThrHigh);
if (aniState->update_ani)
- aniState->ofdmNoiseImmunityLevel = immunityLevel;
+ aniState->ofdmNoiseImmunityLevel =
+ (immunityLevel > ATH9K_ANI_OFDM_DEF_LEVEL) ?
+ immunityLevel : ATH9K_ANI_OFDM_DEF_LEVEL;
entry_ofdm = &ofdm_level_table[aniState->ofdmNoiseImmunityLevel];
entry_cck = &cck_level_table[aniState->cckNoiseImmunityLevel];
@@ -340,7 +342,9 @@ static void ath9k_hw_set_cck_nil(struct
immunityLevel = ATH9K_ANI_CCK_MAX_LEVEL_LOW_RSSI;
if (aniState->update_ani)
- aniState->cckNoiseImmunityLevel = immunityLevel;
+ aniState->cckNoiseImmunityLevel =
+ (immunityLevel > ATH9K_ANI_CCK_DEF_LEVEL) ?
+ immunityLevel : ATH9K_ANI_CCK_DEF_LEVEL;
entry_ofdm = &ofdm_level_table[aniState->ofdmNoiseImmunityLevel];
entry_cck = &cck_level_table[aniState->cckNoiseImmunityLevel];
--- a/drivers/net/wireless/ath/ath9k/ar5008_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar5008_phy.c
@@ -618,19 +618,10 @@ static void ar5008_hw_init_bb(struct ath
u32 synthDelay;
synthDelay = REG_READ(ah, AR_PHY_RX_DELAY) & AR_PHY_RX_DELAY_DELAY;
- if (IS_CHAN_B(chan))
- synthDelay = (4 * synthDelay) / 22;
- else
- synthDelay /= 10;
-
- if (IS_CHAN_HALF_RATE(chan))
- synthDelay *= 2;
- else if (IS_CHAN_QUARTER_RATE(chan))
- synthDelay *= 4;
REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_EN);
- udelay(synthDelay + BASE_ACTIVATE_DELAY);
+ ath9k_hw_synth_delay(ah, chan, synthDelay);
}
static void ar5008_hw_init_chain_masks(struct ath_hw *ah)
@@ -868,7 +859,7 @@ static int ar5008_hw_process_ini(struct
ar5008_hw_set_channel_regs(ah, chan);
ar5008_hw_init_chain_masks(ah);
ath9k_olc_init(ah);
- ath9k_hw_apply_txpower(ah, chan);
+ ath9k_hw_apply_txpower(ah, chan, false);
/* Write analog registers */
if (!ath9k_hw_set_rf_regs(ah, chan, freqIndex)) {
@@ -948,12 +939,8 @@ static bool ar5008_hw_rfbus_req(struct a
static void ar5008_hw_rfbus_done(struct ath_hw *ah)
{
u32 synthDelay = REG_READ(ah, AR_PHY_RX_DELAY) & AR_PHY_RX_DELAY_DELAY;
- if (IS_CHAN_B(ah->curchan))
- synthDelay = (4 * synthDelay) / 22;
- else
- synthDelay /= 10;
- udelay(synthDelay + BASE_ACTIVATE_DELAY);
+ ath9k_hw_synth_delay(ah, ah->curchan, synthDelay);
REG_WRITE(ah, AR_PHY_RFBUS_REQ, 0);
}
--- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
@@ -1000,10 +1000,12 @@ static bool ar9003_hw_init_cal(struct at
if (mci && IS_CHAN_2GHZ(chan) && run_agc_cal)
ar9003_mci_init_cal_req(ah, &is_reusable);
- txiqcal_done = ar9003_hw_tx_iq_cal_run(ah);
- REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_DIS);
- udelay(5);
- REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_EN);
+ if (!(IS_CHAN_HALF_RATE(chan) || IS_CHAN_QUARTER_RATE(chan))) {
+ txiqcal_done = ar9003_hw_tx_iq_cal_run(ah);
+ REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_DIS);
+ udelay(5);
+ REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_EN);
+ }
skip_tx_iqcal:
if (run_agc_cal || !(ah->ah_flags & AH_FASTCC)) {
--- a/drivers/net/wireless/ath/ath9k/ar9003_paprd.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_paprd.c
@@ -54,7 +54,7 @@ void ar9003_paprd_enable(struct ath_hw *
if (val) {
ah->paprd_table_write_done = true;
- ath9k_hw_apply_txpower(ah, chan);
+ ath9k_hw_apply_txpower(ah, chan, false);
}
REG_RMW_FIELD(ah, AR_PHY_PAPRD_CTRL0_B0,
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
@@ -524,22 +524,10 @@ static void ar9003_hw_init_bb(struct ath
* Value is in 100ns increments.
*/
synthDelay = REG_READ(ah, AR_PHY_RX_DELAY) & AR_PHY_RX_DELAY_DELAY;
- if (IS_CHAN_B(chan))
- synthDelay = (4 * synthDelay) / 22;
- else
- synthDelay /= 10;
/* Activate the PHY (includes baseband activate + synthesizer on) */
REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_EN);
-
- /*
- * There is an issue if the AP starts the calibration before
- * the base band timeout completes. This could result in the
- * rx_clear false triggering. As a workaround we add delay an
- * extra BASE_ACTIVATE_DELAY usecs to ensure this condition
- * does not happen.
- */
- udelay(synthDelay + BASE_ACTIVATE_DELAY);
+ ath9k_hw_synth_delay(ah, chan, synthDelay);
}
static void ar9003_hw_set_chain_masks(struct ath_hw *ah, u8 rx, u8 tx)
@@ -690,7 +678,7 @@ static int ar9003_hw_process_ini(struct
ar9003_hw_override_ini(ah);
ar9003_hw_set_channel_regs(ah, chan);
ar9003_hw_set_chain_masks(ah, ah->rxchainmask, ah->txchainmask);
- ath9k_hw_apply_txpower(ah, chan);
+ ath9k_hw_apply_txpower(ah, chan, false);
if (AR_SREV_9462(ah)) {
if (REG_READ_FIELD(ah, AR_PHY_TX_IQCAL_CONTROL_0,
@@ -721,6 +709,14 @@ static void ar9003_hw_set_rfmode(struct
if (IS_CHAN_A_FAST_CLOCK(ah, chan))
rfMode |= (AR_PHY_MODE_DYNAMIC | AR_PHY_MODE_DYN_CCK_DISABLE);
+ if (IS_CHAN_QUARTER_RATE(chan))
+ rfMode |= AR_PHY_MODE_QUARTER;
+ if (IS_CHAN_HALF_RATE(chan))
+ rfMode |= AR_PHY_MODE_HALF;
+
+ if (rfMode & (AR_PHY_MODE_QUARTER | AR_PHY_MODE_HALF))
+ REG_RMW_FIELD(ah, AR_PHY_FRAME_CTL,
+ AR_PHY_FRAME_CTL_CF_OVERLAP_WINDOW, 3);
REG_WRITE(ah, AR_PHY_MODE, rfMode);
}
@@ -791,12 +787,8 @@ static bool ar9003_hw_rfbus_req(struct a
static void ar9003_hw_rfbus_done(struct ath_hw *ah)
{
u32 synthDelay = REG_READ(ah, AR_PHY_RX_DELAY) & AR_PHY_RX_DELAY_DELAY;
- if (IS_CHAN_B(ah->curchan))
- synthDelay = (4 * synthDelay) / 22;
- else
- synthDelay /= 10;
- udelay(synthDelay + BASE_ACTIVATE_DELAY);
+ ath9k_hw_synth_delay(ah, ah->curchan, synthDelay);
REG_WRITE(ah, AR_PHY_RFBUS_REQ, 0);
}
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.h
@@ -468,6 +468,9 @@
#define AR_PHY_ADDAC_PARA_CTL (AR_SM_BASE + 0x150)
#define AR_PHY_XPA_CFG (AR_SM_BASE + 0x158)
+#define AR_PHY_FRAME_CTL_CF_OVERLAP_WINDOW 3
+#define AR_PHY_FRAME_CTL_CF_OVERLAP_WINDOW_S 0
+
#define AR_PHY_SPUR_MASK_A_CF_PUNC_MASK_IDX_A 0x0001FC00
#define AR_PHY_SPUR_MASK_A_CF_PUNC_MASK_IDX_A_S 10
#define AR_PHY_SPUR_MASK_A_CF_PUNC_MASK_A 0x3FF
--- a/drivers/net/wireless/ath/ath9k/ar9462_2p0_initvals.h
+++ b/drivers/net/wireless/ath/ath9k/ar9462_2p0_initvals.h
@@ -1115,9 +1115,9 @@ static const u32 ar9462_2p0_mac_core[][2
{0x000081f8, 0x00000000},
{0x000081fc, 0x00000000},
{0x00008240, 0x00100000},
- {0x00008244, 0x0010f400},
+ {0x00008244, 0x0010f424},
{0x00008248, 0x00000800},
- {0x0000824c, 0x0001e800},
+ {0x0000824c, 0x0001e848},
{0x00008250, 0x00000000},
{0x00008254, 0x00000000},
{0x00008258, 0x00000000},
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -370,7 +370,7 @@ struct ath_vif {
* number of beacon intervals, the game's up.
*/
#define BSTUCK_THRESH 9
-#define ATH_BCBUF 4
+#define ATH_BCBUF 8
#define ATH_DEFAULT_BINTVAL 100 /* TU */
#define ATH_DEFAULT_BMISS_LIMIT 10
#define IEEE80211_MS_TO_TU(x) (((x) * 1000) / 1024)
--- a/drivers/net/wireless/ath/ath9k/beacon.c
+++ b/drivers/net/wireless/ath/ath9k/beacon.c
@@ -91,7 +91,7 @@ static void ath_beacon_setup(struct ath_
info.txpower = MAX_RATE_POWER;
info.keyix = ATH9K_TXKEYIX_INVALID;
info.keytype = ATH9K_KEY_TYPE_CLEAR;
- info.flags = ATH9K_TXDESC_NOACK | ATH9K_TXDESC_INTREQ;
+ info.flags = ATH9K_TXDESC_NOACK | ATH9K_TXDESC_CLRDMASK;
info.buf_addr[0] = bf->bf_buf_addr;
info.buf_len[0] = roundup(skb->len, 4);
@@ -359,6 +359,11 @@ void ath_beacon_tasklet(unsigned long da
int slot;
u32 bfaddr, bc = 0;
+ if (work_pending(&sc->hw_reset_work)) {
+ ath_dbg(common, RESET,
+ "reset work is pending, skip beaconing now\n");
+ return;
+ }
/*
* Check if the previous beacon has gone out. If
* not don't try to post another, skip this period
@@ -369,6 +374,9 @@ void ath_beacon_tasklet(unsigned long da
if (ath9k_hw_numtxpending(ah, sc->beacon.beaconq) != 0) {
sc->beacon.bmisscnt++;
+ if (!ath9k_hw_check_alive(ah))
+ ieee80211_queue_work(sc->hw, &sc->hw_check_work);
+
if (sc->beacon.bmisscnt < BSTUCK_THRESH * sc->nbcnvifs) {
ath_dbg(common, BSTUCK,
"missed %u consecutive beacons\n",
@@ -378,6 +386,7 @@ void ath_beacon_tasklet(unsigned long da
ath9k_hw_bstuck_nfcal(ah);
} else if (sc->beacon.bmisscnt >= BSTUCK_THRESH) {
ath_dbg(common, BSTUCK, "beacon is officially stuck\n");
+ sc->beacon.bmisscnt = 0;
sc->sc_flags |= SC_OP_TSF_RESET;
ieee80211_queue_work(sc->hw, &sc->hw_reset_work);
}
@@ -650,6 +659,8 @@ static void ath_beacon_config_adhoc(stru
u32 tsf, intval, nexttbtt;
ath9k_reset_beacon_status(sc);
+ if (!(sc->sc_flags & SC_OP_BEACONS))
+ ath9k_hw_settsf64(ah, sc->beacon.bc_tstamp);
intval = TU_TO_USEC(conf->beacon_interval);
tsf = roundup(ath9k_hw_gettsf32(ah) + TU_TO_USEC(FUDGE), intval);
--- a/drivers/net/wireless/ath/ath9k/eeprom_9287.c
+++ b/drivers/net/wireless/ath/ath9k/eeprom_9287.c
@@ -824,6 +824,8 @@ static void ath9k_hw_ar9287_set_txpower(
regulatory->max_power_level = ratesArray[i];
}
+ ath9k_hw_update_regulatory_maxpower(ah);
+
if (test)
return;
--- a/drivers/net/wireless/ath/ath9k/gpio.c
+++ b/drivers/net/wireless/ath/ath9k/gpio.c
@@ -41,6 +41,9 @@ void ath_init_leds(struct ath_softc *sc)
{
int ret;
+ if (AR_SREV_9100(sc->sc_ah))
+ return;
+
if (sc->sc_ah->led_pin < 0) {
if (AR_SREV_9287(sc->sc_ah))
sc->sc_ah->led_pin = ATH_LED_PIN_9287;
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -142,6 +142,22 @@ bool ath9k_hw_wait(struct ath_hw *ah, u3
}
EXPORT_SYMBOL(ath9k_hw_wait);
+void ath9k_hw_synth_delay(struct ath_hw *ah, struct ath9k_channel *chan,
+ int hw_delay)
+{
+ if (IS_CHAN_B(chan))
+ hw_delay = (4 * hw_delay) / 22;
+ else
+ hw_delay /= 10;
+
+ if (IS_CHAN_HALF_RATE(chan))
+ hw_delay *= 2;
+ else if (IS_CHAN_QUARTER_RATE(chan))
+ hw_delay *= 4;
+
+ udelay(hw_delay + BASE_ACTIVATE_DELAY);
+}
+
void ath9k_hw_write_array(struct ath_hw *ah, struct ar5416IniArray *array,
int column, unsigned int *writecnt)
{
@@ -388,8 +404,8 @@ static void ath9k_hw_init_config(struct
{
int i;
- ah->config.dma_beacon_response_time = 2;
- ah->config.sw_beacon_response_time = 10;
+ ah->config.dma_beacon_response_time = 1;
+ ah->config.sw_beacon_response_time = 6;
ah->config.additional_swba_backoff = 0;
ah->config.ack_6mb = 0x0;
ah->config.cwm_ignore_extcca = 0;
@@ -971,7 +987,7 @@ void ath9k_hw_init_global_settings(struc
struct ath_common *common = ath9k_hw_common(ah);
struct ieee80211_conf *conf = &common->hw->conf;
const struct ath9k_channel *chan = ah->curchan;
- int acktimeout, ctstimeout;
+ int acktimeout, ctstimeout, ack_offset = 0;
int slottime;
int sifstime;
int rx_lat = 0, tx_lat = 0, eifs = 0;
@@ -992,6 +1008,11 @@ void ath9k_hw_init_global_settings(struc
rx_lat = 37;
tx_lat = 54;
+ if (IS_CHAN_5GHZ(chan))
+ sifstime = 16;
+ else
+ sifstime = 10;
+
if (IS_CHAN_HALF_RATE(chan)) {
eifs = 175;
rx_lat *= 2;
@@ -999,8 +1020,9 @@ void ath9k_hw_init_global_settings(struc
if (IS_CHAN_A_FAST_CLOCK(ah, chan))
tx_lat += 11;
+ sifstime *= 2;
+ ack_offset = 16;
slottime = 13;
- sifstime = 32;
} else if (IS_CHAN_QUARTER_RATE(chan)) {
eifs = 340;
rx_lat = (rx_lat * 4) - 1;
@@ -1008,8 +1030,9 @@ void ath9k_hw_init_global_settings(struc
if (IS_CHAN_A_FAST_CLOCK(ah, chan))
tx_lat += 22;
+ sifstime *= 4;
+ ack_offset = 32;
slottime = 21;
- sifstime = 64;
} else {
if (AR_SREV_9287(ah) && AR_SREV_9287_13_OR_LATER(ah)) {
eifs = AR_D_GBL_IFS_EIFS_ASYNC_FIFO;
@@ -1023,14 +1046,10 @@ void ath9k_hw_init_global_settings(struc
tx_lat = MS(reg, AR_USEC_TX_LAT);
slottime = ah->slottime;
- if (IS_CHAN_5GHZ(chan))
- sifstime = 16;
- else
- sifstime = 10;
}
/* As defined by IEEE 802.11-2007 17.3.8.6 */
- acktimeout = slottime + sifstime + 3 * ah->coverage_class;
+ acktimeout = slottime + sifstime + 3 * ah->coverage_class + ack_offset;
ctstimeout = acktimeout;
/*
@@ -1040,7 +1059,8 @@ void ath9k_hw_init_global_settings(struc
* BA frames in some implementations, but it has been found to fix ACK
* timeout issues in other cases as well.
*/
- if (conf->channel && conf->channel->band == IEEE80211_BAND_2GHZ) {
+ if (conf->channel && conf->channel->band == IEEE80211_BAND_2GHZ &&
+ !IS_CHAN_HALF_RATE(chan) && !IS_CHAN_QUARTER_RATE(chan)) {
acktimeout += 64 - sifstime - ah->slottime;
ctstimeout += 48 - sifstime - ah->slottime;
}
@@ -1420,6 +1440,10 @@ static bool ath9k_hw_channel_change(stru
CHANNEL_5GHZ));
mode_diff = (chan->chanmode != ah->curchan->chanmode);
+ if ((ah->curchan->channelFlags | chan->channelFlags) &
+ (CHANNEL_HALF | CHANNEL_QUARTER))
+ return false;
+
for (qnum = 0; qnum < AR_NUM_QCU; qnum++) {
if (ath9k_hw_numtxpending(ah, qnum)) {
ath_dbg(common, QUEUE,
@@ -1453,7 +1477,7 @@ static bool ath9k_hw_channel_change(stru
return false;
}
ath9k_hw_set_clockrate(ah);
- ath9k_hw_apply_txpower(ah, chan);
+ ath9k_hw_apply_txpower(ah, chan, false);
ath9k_hw_rfbus_done(ah);
if (IS_CHAN_OFDM(chan) || IS_CHAN_HT(chan))
@@ -2724,7 +2748,8 @@ static int get_antenna_gain(struct ath_h
return ah->eep_ops->get_eeprom(ah, gain_param);
}
-void ath9k_hw_apply_txpower(struct ath_hw *ah, struct ath9k_channel *chan)
+void ath9k_hw_apply_txpower(struct ath_hw *ah, struct ath9k_channel *chan,
+ bool test)
{
struct ath_regulatory *reg = ath9k_hw_regulatory(ah);
struct ieee80211_channel *channel;
@@ -2745,7 +2770,7 @@ void ath9k_hw_apply_txpower(struct ath_h
ah->eep_ops->set_txpower(ah, chan,
ath9k_regd_get_ctl(reg, chan),
- ant_reduction, new_pwr, false);
+ ant_reduction, new_pwr, test);
}
void ath9k_hw_set_txpowerlimit(struct ath_hw *ah, u32 limit, bool test)
@@ -2758,7 +2783,7 @@ void ath9k_hw_set_txpowerlimit(struct at
if (test)
channel->max_power = MAX_RATE_POWER / 2;
- ath9k_hw_apply_txpower(ah, chan);
+ ath9k_hw_apply_txpower(ah, chan, test);
if (test)
channel->max_power = DIV_ROUND_UP(reg->max_power_level, 2);
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -923,6 +923,8 @@ void ath9k_hw_set_gpio(struct ath_hw *ah
void ath9k_hw_setantenna(struct ath_hw *ah, u32 antenna);
/* General Operation */
+void ath9k_hw_synth_delay(struct ath_hw *ah, struct ath9k_channel *chan,
+ int hw_delay);
bool ath9k_hw_wait(struct ath_hw *ah, u32 reg, u32 mask, u32 val, u32 timeout);
void ath9k_hw_write_array(struct ath_hw *ah, struct ar5416IniArray *array,
int column, unsigned int *writecnt);
@@ -976,7 +978,8 @@ void ath9k_hw_name(struct ath_hw *ah, ch
/* PHY */
void ath9k_hw_get_delta_slope_vals(struct ath_hw *ah, u32 coef_scaled,
u32 *coef_mantissa, u32 *coef_exponent);
-void ath9k_hw_apply_txpower(struct ath_hw *ah, struct ath9k_channel *chan);
+void ath9k_hw_apply_txpower(struct ath_hw *ah, struct ath9k_channel *chan,
+ bool test);
/*
* Code Specific to AR5008, AR9001 or AR9002,
--- a/drivers/net/wireless/ath/ath9k/mac.c
+++ b/drivers/net/wireless/ath/ath9k/mac.c
@@ -133,8 +133,16 @@ EXPORT_SYMBOL(ath9k_hw_updatetxtriglevel
void ath9k_hw_abort_tx_dma(struct ath_hw *ah)
{
+ int maxdelay = 1000;
int i, q;
+ if (ah->curchan) {
+ if (IS_CHAN_HALF_RATE(ah->curchan))
+ maxdelay *= 2;
+ else if (IS_CHAN_QUARTER_RATE(ah->curchan))
+ maxdelay *= 4;
+ }
+
REG_WRITE(ah, AR_Q_TXD, AR_Q_TXD_M);
REG_SET_BIT(ah, AR_PCU_MISC, AR_PCU_FORCE_QUIET_COLL | AR_PCU_CLEAR_VMF);
@@ -142,7 +150,7 @@ void ath9k_hw_abort_tx_dma(struct ath_hw
REG_SET_BIT(ah, AR_D_GBL_IFS_MISC, AR_D_GBL_IFS_MISC_IGNORE_BACKOFF);
for (q = 0; q < AR_NUM_QCU; q++) {
- for (i = 0; i < 1000; i++) {
+ for (i = 0; i < maxdelay; i++) {
if (i)
udelay(5);
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -692,17 +692,6 @@ void ath9k_tasklet(unsigned long data)
goto out;
}
- /*
- * Only run the baseband hang check if beacons stop working in AP or
- * IBSS mode, because it has a high false positive rate. For station
- * mode it should not be necessary, since the upper layers will detect
- * this through a beacon miss automatically and the following channel
- * change will trigger a hardware reset anyway
- */
- if (ath9k_hw_numtxpending(ah, sc->beacon.beaconq) != 0 &&
- !ath9k_hw_check_alive(ah))
- ieee80211_queue_work(sc->hw, &sc->hw_check_work);
-
if ((status & ATH9K_INT_TSFOOR) && sc->ps_enabled) {
/*
* TSF sync does not look correct; remain awake to sync with
--- a/net/mac80211/agg-rx.c
+++ b/net/mac80211/agg-rx.c
@@ -200,6 +200,8 @@ static void ieee80211_send_addba_resp(st
memcpy(mgmt->bssid, sdata->u.mgd.bssid, ETH_ALEN);
else if (sdata->vif.type == NL80211_IFTYPE_ADHOC)
memcpy(mgmt->bssid, sdata->u.ibss.bssid, ETH_ALEN);
+ else if (sdata->vif.type == NL80211_IFTYPE_WDS)
+ memcpy(mgmt->bssid, da, ETH_ALEN);
mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
IEEE80211_STYPE_ACTION);
--- a/net/mac80211/agg-tx.c
+++ b/net/mac80211/agg-tx.c
@@ -81,7 +81,8 @@ static void ieee80211_send_addba_request
memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN);
if (sdata->vif.type == NL80211_IFTYPE_AP ||
sdata->vif.type == NL80211_IFTYPE_AP_VLAN ||
- sdata->vif.type == NL80211_IFTYPE_MESH_POINT)
+ sdata->vif.type == NL80211_IFTYPE_MESH_POINT ||
+ sdata->vif.type == NL80211_IFTYPE_WDS)
memcpy(mgmt->bssid, sdata->vif.addr, ETH_ALEN);
else if (sdata->vif.type == NL80211_IFTYPE_STATION)
memcpy(mgmt->bssid, sdata->u.mgd.bssid, ETH_ALEN);
@@ -484,6 +485,7 @@ int ieee80211_start_tx_ba_session(struct
sdata->vif.type != NL80211_IFTYPE_MESH_POINT &&
sdata->vif.type != NL80211_IFTYPE_AP_VLAN &&
sdata->vif.type != NL80211_IFTYPE_AP &&
+ sdata->vif.type != NL80211_IFTYPE_WDS &&
sdata->vif.type != NL80211_IFTYPE_ADHOC)
return -EINVAL;
--- a/net/mac80211/debugfs_sta.c
+++ b/net/mac80211/debugfs_sta.c
@@ -63,11 +63,11 @@ static ssize_t sta_flags_read(struct fil
test_sta_flag(sta, WLAN_STA_##flg) ? #flg "\n" : ""
int res = scnprintf(buf, sizeof(buf),
- "%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s",
+ "%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s",
TEST(AUTH), TEST(ASSOC), TEST(PS_STA),
TEST(PS_DRIVER), TEST(AUTHORIZED),
TEST(SHORT_PREAMBLE),
- TEST(WME), TEST(WDS), TEST(CLEAR_PS_FILT),
+ TEST(WME), TEST(CLEAR_PS_FILT),
TEST(MFP), TEST(BLOCK_BA), TEST(PSPOLL),
TEST(UAPSD), TEST(SP), TEST(TDLS_PEER),
TEST(TDLS_PEER_AUTH), TEST(4ADDR_EVENT),
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -163,7 +163,8 @@ static int ieee80211_check_queues(struct
return -EINVAL;
}
- if (sdata->vif.type != NL80211_IFTYPE_AP) {
+ if ((sdata->vif.type != NL80211_IFTYPE_AP) ||
+ !(sdata->local->hw.flags & IEEE80211_HW_QUEUE_CONTROL)) {
sdata->vif.cab_queue = IEEE80211_INVAL_HW_QUEUE;
return 0;
}
@@ -281,7 +282,6 @@ static int ieee80211_do_open(struct net_
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_local *local = sdata->local;
- struct sta_info *sta;
u32 changed = 0;
int res;
u32 hw_reconf_flags = 0;
@@ -427,28 +427,6 @@ static int ieee80211_do_open(struct net_
set_bit(SDATA_STATE_RUNNING, &sdata->state);
- if (sdata->vif.type == NL80211_IFTYPE_WDS) {
- /* Create STA entry for the WDS peer */
- sta = sta_info_alloc(sdata, sdata->u.wds.remote_addr,
- GFP_KERNEL);
- if (!sta) {
- res = -ENOMEM;
- goto err_del_interface;
- }
-
- sta_info_pre_move_state(sta, IEEE80211_STA_AUTH);
- sta_info_pre_move_state(sta, IEEE80211_STA_ASSOC);
- sta_info_pre_move_state(sta, IEEE80211_STA_AUTHORIZED);
-
- res = sta_info_insert(sta);
- if (res) {
- /* STA has been freed */
- goto err_del_interface;
- }
-
- rate_control_rate_init(sta);
- }
-
/*
* set_multicast_list will be invoked by the networking core
* which will check whether any increments here were done in
@@ -845,6 +823,70 @@ static void ieee80211_if_setup(struct ne
dev->destructor = free_netdev;
}
+static void ieee80211_wds_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata,
+ struct sk_buff *skb)
+{
+ struct ieee80211_local *local = sdata->local;
+ struct ieee80211_rx_status *rx_status;
+ struct ieee802_11_elems elems;
+ struct ieee80211_mgmt *mgmt;
+ struct sta_info *sta;
+ size_t baselen;
+ u32 rates = 0;
+ u16 stype;
+ bool new = false;
+ enum ieee80211_band band = local->hw.conf.channel->band;
+ struct ieee80211_supported_band *sband = local->hw.wiphy->bands[band];
+
+ rx_status = IEEE80211_SKB_RXCB(skb);
+ mgmt = (struct ieee80211_mgmt *) skb->data;
+ stype = le16_to_cpu(mgmt->frame_control) & IEEE80211_FCTL_STYPE;
+
+ if (stype != IEEE80211_STYPE_BEACON)
+ return;
+
+ baselen = (u8 *) mgmt->u.probe_resp.variable - (u8 *) mgmt;
+ if (baselen > skb->len)
+ return;
+
+ ieee802_11_parse_elems(mgmt->u.probe_resp.variable,
+ skb->len - baselen, &elems);
+
+ rates = ieee80211_sta_get_rates(local, &elems, band, NULL);
+
+ rcu_read_lock();
+
+ sta = sta_info_get(sdata, sdata->u.wds.remote_addr);
+
+ if (!sta) {
+ rcu_read_unlock();
+ sta = sta_info_alloc(sdata, sdata->u.wds.remote_addr,
+ GFP_KERNEL);
+ if (!sta)
+ return;
+
+ new = true;
+ }
+
+ sta->last_rx = jiffies;
+ sta->sta.supp_rates[local->hw.conf.channel->band] = rates;
+
+ if (elems.ht_cap_elem)
+ ieee80211_ht_cap_ie_to_sta_ht_cap(sdata, sband,
+ elems.ht_cap_elem, &sta->sta.ht_cap);
+
+ if (elems.wmm_param)
+ set_sta_flag(sta, WLAN_STA_WME);
+
+ if (new) {
+ set_sta_flag(sta, WLAN_STA_AUTHORIZED);
+ rate_control_rate_init(sta);
+ sta_info_insert_rcu(sta);
+ }
+
+ rcu_read_unlock();
+}
+
static void ieee80211_iface_work(struct work_struct *work)
{
struct ieee80211_sub_if_data *sdata =
@@ -949,6 +991,9 @@ static void ieee80211_iface_work(struct
break;
ieee80211_mesh_rx_queued_mgmt(sdata, skb);
break;
+ case NL80211_IFTYPE_WDS:
+ ieee80211_wds_rx_queued_mgmt(sdata, skb);
+ break;
default:
WARN(1, "frame for unexpected interface type");
break;
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -103,7 +103,7 @@ static void
ieee80211_add_rx_radiotap_header(struct ieee80211_local *local,
struct sk_buff *skb,
struct ieee80211_rate *rate,
- int rtap_len)
+ int rtap_len, bool has_fcs)
{
struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
struct ieee80211_radiotap_header *rthdr;
@@ -134,7 +134,7 @@ ieee80211_add_rx_radiotap_header(struct
}
/* IEEE80211_RADIOTAP_FLAGS */
- if (local->hw.flags & IEEE80211_HW_RX_INCLUDES_FCS)
+ if (has_fcs && (local->hw.flags & IEEE80211_HW_RX_INCLUDES_FCS))
*pos |= IEEE80211_RADIOTAP_F_FCS;
if (status->flag & (RX_FLAG_FAILED_FCS_CRC | RX_FLAG_FAILED_PLCP_CRC))
*pos |= IEEE80211_RADIOTAP_F_BADFCS;
@@ -294,7 +294,8 @@ ieee80211_rx_monitor(struct ieee80211_lo
}
/* prepend radiotap information */
- ieee80211_add_rx_radiotap_header(local, skb, rate, needed_headroom);
+ ieee80211_add_rx_radiotap_header(local, skb, rate, needed_headroom,
+ true);
skb_reset_mac_header(skb);
skb->ip_summed = CHECKSUM_UNNECESSARY;
@@ -2282,6 +2283,7 @@ ieee80211_rx_h_action(struct ieee80211_r
sdata->vif.type != NL80211_IFTYPE_MESH_POINT &&
sdata->vif.type != NL80211_IFTYPE_AP_VLAN &&
sdata->vif.type != NL80211_IFTYPE_AP &&
+ sdata->vif.type != NL80211_IFTYPE_WDS &&
sdata->vif.type != NL80211_IFTYPE_ADHOC)
break;
@@ -2496,14 +2498,15 @@ ieee80211_rx_h_mgmt(struct ieee80211_rx_
if (!ieee80211_vif_is_mesh(&sdata->vif) &&
sdata->vif.type != NL80211_IFTYPE_ADHOC &&
- sdata->vif.type != NL80211_IFTYPE_STATION)
+ sdata->vif.type != NL80211_IFTYPE_STATION &&
+ sdata->vif.type != NL80211_IFTYPE_WDS)
return RX_DROP_MONITOR;
switch (stype) {
case cpu_to_le16(IEEE80211_STYPE_AUTH):
case cpu_to_le16(IEEE80211_STYPE_BEACON):
case cpu_to_le16(IEEE80211_STYPE_PROBE_RESP):
- /* process for all: mesh, mlme, ibss */
+ /* process for all: mesh, mlme, ibss, wds */
break;
case cpu_to_le16(IEEE80211_STYPE_ASSOC_RESP):
case cpu_to_le16(IEEE80211_STYPE_REASSOC_RESP):
@@ -2567,7 +2570,8 @@ static void ieee80211_rx_cooked_monitor(
goto out_free_skb;
/* prepend radiotap information */
- ieee80211_add_rx_radiotap_header(local, skb, rate, needed_headroom);
+ ieee80211_add_rx_radiotap_header(local, skb, rate, needed_headroom,
+ false);
skb_set_mac_header(skb, 0);
skb->ip_summed = CHECKSUM_UNNECESSARY;
@@ -2836,10 +2840,16 @@ static int prepare_for_handlers(struct i
}
break;
case NL80211_IFTYPE_WDS:
- if (bssid || !ieee80211_is_data(hdr->frame_control))
- return 0;
if (compare_ether_addr(sdata->u.wds.remote_addr, hdr->addr2))
return 0;
+
+ if (ieee80211_is_data(hdr->frame_control) ||
+ ieee80211_is_action(hdr->frame_control)) {
+ if (compare_ether_addr(sdata->vif.addr, hdr->addr1))
+ return 0;
+ } else if (!ieee80211_is_beacon(hdr->frame_control))
+ return 0;
+
break;
default:
/* should never get here */
--- a/net/mac80211/sta_info.h
+++ b/net/mac80211/sta_info.h
@@ -32,7 +32,6 @@
* @WLAN_STA_SHORT_PREAMBLE: Station is capable of receiving short-preamble
* frames.
* @WLAN_STA_WME: Station is a QoS-STA.
- * @WLAN_STA_WDS: Station is one of our WDS peers.
* @WLAN_STA_CLEAR_PS_FILT: Clear PS filter in hardware (using the
* IEEE80211_TX_CTL_CLEAR_PS_FILT control flag) when the next
* frame to this station is transmitted.
@@ -64,7 +63,6 @@ enum ieee80211_sta_info_flags {
WLAN_STA_AUTHORIZED,
WLAN_STA_SHORT_PREAMBLE,
WLAN_STA_WME,
- WLAN_STA_WDS,
WLAN_STA_CLEAR_PS_FILT,
WLAN_STA_MFP,
WLAN_STA_BLOCK_BA,
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -647,6 +647,24 @@ void ath9k_reload_chainmask_settings(str
setup_ht_cap(sc, &sc->sbands[IEEE80211_BAND_5GHZ].ht_cap);
}
+static const struct ieee80211_iface_limit if_limits[] = {
+ { .max = 2048, .types = BIT(NL80211_IFTYPE_STATION) |
+ BIT(NL80211_IFTYPE_P2P_CLIENT) |
+ BIT(NL80211_IFTYPE_WDS) },
+ { .max = 8, .types =
+#ifdef CONFIG_MAC80211_MESH
+ BIT(NL80211_IFTYPE_MESH_POINT) |
+#endif
+ BIT(NL80211_IFTYPE_AP) |
+ BIT(NL80211_IFTYPE_P2P_GO) },
+};
+
+static const struct ieee80211_iface_combination if_comb = {
+ .limits = if_limits,
+ .n_limits = ARRAY_SIZE(if_limits),
+ .max_interfaces = 2048,
+ .num_different_channels = 1,
+};
void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
{
@@ -676,6 +694,9 @@ void ath9k_set_hw_capab(struct ath_softc
BIT(NL80211_IFTYPE_ADHOC) |
BIT(NL80211_IFTYPE_MESH_POINT);
+ hw->wiphy->iface_combinations = &if_comb;
+ hw->wiphy->n_iface_combinations = 1;
+
if (AR_SREV_5416(sc->sc_ah))
hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
--- a/net/mac80211/ibss.c
+++ b/net/mac80211/ibss.c
@@ -455,8 +455,8 @@ static void ieee80211_rx_bss_info(struct
* fall back to HT20 if we don't use or use
* the other extension channel
*/
- if ((channel_type == NL80211_CHAN_HT40MINUS ||
- channel_type == NL80211_CHAN_HT40PLUS) &&
+ if (!(channel_type == NL80211_CHAN_HT40MINUS ||
+ channel_type == NL80211_CHAN_HT40PLUS) ||
channel_type != sdata->u.ibss.channel_type)
sta_ht_cap_new.cap &=
~IEEE80211_HT_CAP_SUP_WIDTH_20_40;