openwrt/target/linux/brcm63xx/dts/dsl-275xb-d.dts

134 lines
2.2 KiB
Plaintext
Raw Normal View History

/dts-v1/;
#include "bcm6318.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "D-Link DSL-2750B/DSL-2751 rev D1";
compatible = "d-link,dsl-275xb-d", "brcm,bcm6318";
chosen {
bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
stdout-path = "serial0:115200n8";
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
debounce-interval = <60>;
wifi {
label = "wifi";
gpios = <&pinctrl 2 1>;
linux,code = <KEY_WLAN>;
};
wps {
label = "wps";
gpios = <&pinctrl 33 1>;
linux,code = <KEY_WPS_BUTTON>;
};
reset {
label = "reset";
gpios = <&pinctrl 34 1>;
linux,code = <KEY_RESTART>;
};
};
gpio-leds {
compatible = "gpio-leds";
power_green {
label = "dsl-275xb:green:power";
gpios = <&pinctrl 3 1>;
default-state = "on";
};
inet_green {
label = "dsl-275xb:green:inet";
gpios = <&pinctrl 8 1>;
};
inet_red {
label = "dsl-275xb:red:inet-fail";
gpios = <&pinctrl 9 1>;
};
power_red {
label = "dsl-275xb:red:post-failed";
gpios = <&pinctrl 11 1>;
};
wps_blue {
label = "dsl-275xb:blue:wps";
gpios = <&pinctrl 16 1>;
};
dsl_green {
label = "dsl-275xb:green:dsl";
gpios = <&pinctrl 17 1>;
};
usb_green {
/* not user controllable? */
label = "dsl-275xb:green:usb";
gpios = <&pinctrl 49 1>;
};
};
};
&hsspi {
status = "ok";
flash@0 {
compatible = "jedec,spi-nor";
spi-max-frequency = <62500000>;
spi-tx-bus-width = <2>;
spi-rx-bus-width = <2>;
reg = <0>;
#address-cells = <1>;
#size-cells = <1>;
linux,part-probe = "bcm63xxpart";
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
cfe@0 {
reg = <0x000000 0x010000>;
label = "cfe";
read-only;
};
linux@10000 {
reg = <0x010000 0x7e0000>;
label = "linux";
compatible = "brcm,bcm963xx-imagetag";
};
nvram@7f0000 {
reg = <0x7f0000 0x010000>;
label = "nvram";
};
};
};
};
&pinctrl {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ephy0_act_led &pinctrl_ephy1_act_led
&pinctrl_ephy2_act_led &pinctrl_ephy3_act_led>;
};
&uart0 {
status = "ok";
};