ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-30 10:39:04 +00:00
Code Issues Actions 4 Packages Projects Releases Wiki Activity
53a1fede1f
openwrt/target/linux/ramips/dts/rt5350_7links_px-4885-4m.dts

49 lines
791 B
Plaintext
Raw Normal View History

ralink: Build 8M image for 7Links PX-4885 7Links PX-4885 (clones) can also be purchased with 8MB flash. Creating images for these routers, use dtsi for common part Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> SVN-Revision: 42892
2014-10-13 19:41:36 +00:00
/dts-v1/;
ramips/rt305x: Name DTS files based on scheme Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-07-03 21:22:36 +00:00
#include "rt5350_7links_px-4885.dtsi"
ralink: Build 8M image for 7Links PX-4885 7Links PX-4885 (clones) can also be purchased with 8MB flash. Creating images for these routers, use dtsi for common part Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> SVN-Revision: 42892
2014-10-13 19:41:36 +00:00
ramips: use new image build code for more devices Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-11-21 07:46:48 +00:00
/ {
ramips: update device tree source files Use the GPIO dt-bindings macros and add compatible strings in the ramips device tree source files. Signed-off-by: L. D. Pinney <ldpinney@gmail.com> Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-07-29 02:14:07 +00:00
compatible = "7links,px-4885-4m", "7links,px-4885", "ralink,rt5350-soc";
ramips: use new image build code for more devices Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-11-21 07:46:48 +00:00
model = "7Links PX-4885 (4M)";
};
ramips: DTS rework Add node aliases to dtsi files. Reword dts files so they're more in-line with upstream. Fix some more warnings and errors reported by dtc Signed-off-by: Stanislav Galabov <sgalabov@gmail.com>
2016-05-10 10:41:46 +00:00
&spi0 {
status = "okay";
ramips: fix indentation and other mistakes in .dts{, i} files The following patch fixes: * wrong indentations * doubled gpio-keys-polled nodes (DIR-300-B7, DIR-320-B1, DIR-610-A1) * duplicate spacings * empty lines at end of files and after last child nodes * trailing and leading whitespace * unnecessary and commented-out code * missing empty lines between nodes and between properties and nodes * unnecessary empty lines between nodes properties [1] in .dts{,i} files, for ramips target. [1] Some of empty lines in SOCs dtsi files were left untouched, because they seem to be there for a reason (readability?). Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> SVN-Revision: 46613
2015-08-17 05:57:18 +00:00
ramips: dts: use generic node name for flash In DTS Checklist[1] we're now demanding proper generic node names, as the name of a node should reflect the function of the device and use generic name for that[2]. Everybody seems to be copy&pasting from DTS files available in the repository today, so let's unify that naming there as well and provide proper examples. While at it, remove unused m25p80 label. Tested on rt5350 (for spi-nor) and rt3662 (for cfi-flash). 1. https://openwrt.org/submitting-patches#dts_checklist 2. https://github.com/devicetree-org/devicetree-specification/blob/master/source/devicetree-basics.rst#generic-names-recommendation Signed-off-by: Sungbo Eo <mans0n@gorani.run>
2020-05-07 14:15:27 +00:00
flash@0 {
ramips: DTS rework Add node aliases to dtsi files. Reword dts files so they're more in-line with upstream. Fix some more warnings and errors reported by dtc Signed-off-by: Stanislav Galabov <sgalabov@gmail.com>
2016-05-10 10:41:46 +00:00
compatible = "jedec,spi-nor";
ramips: fix size-cells on spi nodes size-cells should be 0 in order to avoid dummy values in reg properties. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-14 17:22:08 +00:00
reg = <0>;
ramips: DTS rework Add node aliases to dtsi files. Reword dts files so they're more in-line with upstream. Fix some more warnings and errors reported by dtc Signed-off-by: Stanislav Galabov <sgalabov@gmail.com>
2016-05-10 10:41:46 +00:00
spi-max-frequency = <10000000>;
ralink: Build 8M image for 7Links PX-4885 7Links PX-4885 (clones) can also be purchased with 8MB flash. Creating images for these routers, use dtsi for common part Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> SVN-Revision: 42892
2014-10-13 19:41:36 +00:00
ramips: move partitions into partition table node Starting with kernel 4.4, the use of partitions as direct subnodes of the mtd device is discouraged and only supported for backward compatiblity reasons. Signed-off-by: Alex Maclean <monkeh@monkeh.net>
2018-08-01 20:32:34 +00:00
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x20000>;
read-only;
};
partition@20000 {
label = "devdata";
reg = <0x20000 0x20000>;
read-only;
};
ramips: rt305x: use flash location for wan_mac in 02_network This uses the flash locations instead of eth0 MAC address to calculate MAC address increments for WAN. The change will make the MAC address setup of a particular device more obvious and removes the dependency of 02_network on the eth0 initialization. This removes the wan_mac setup for the following devices as they do not set up a MAC address for ethernet in the first place: - asiarf,awapn2403 - belkin,f7c027 - dlink,dir-615-d - mofinetwork,mofi3500-3gn - prolink,pwh2004 - ralink,v22rw-2x2 - unbranded,wr512-3gn-4m - unbranded,wr512-3gn-8m While at it, make some DT node labels consistent with the label property. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-12-08 15:15:00 +00:00
devconf: partition@40000 {
ramips: move partitions into partition table node Starting with kernel 4.4, the use of partitions as direct subnodes of the mtd device is discouraged and only supported for backward compatiblity reasons. Signed-off-by: Alex Maclean <monkeh@monkeh.net>
2018-08-01 20:32:34 +00:00
label = "devconf";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
ramips: specify "firmware" partition format Specify firmware partition format by compatible string. formats in ramips: - denx,uimage - tplink,firmware - seama It's unlikely but the firmware splitting might not work any longer for the following boards, due to a custom header: - EX2700: two uImage headers - BR-6478AC-V2: edimax-header - 3G-6200N: edimax-header - 3G-6200NL: edimax-header - BR-6475ND: edimax-header - TEW-638APB-V2: umedia-header - RT-N56U: mkrtn56uimg But it rather looks like the uImage splitter is fine with the extra header. The following dts are not touched, due to lack of a compatible string in the matching firmware splitter submodule: - CONFIG_MTD_SPLIT_JIMAGE_FW DWR-116-A1.dts DWR-118-A2.dts DWR-512-B.dts DWR-921-C1.dts LR-25G001.dts - CONFIG_MTD_SPLIT_TRX_FW WCR-1166DS.dts WSR-1166.dts - CONFIG_MTD_SPLIT_MINOR_FW RBM11G.dts RBM33G.dts - CONFIG_MTD_SPLIT_LZMA_FW AR670W.dts - CONFIG_MTD_SPLIT_WRGG_FW DAP-1522-A1.dts Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
2018-11-28 03:28:35 +00:00
compatible = "denx,uimage";
ramips: move partitions into partition table node Starting with kernel 4.4, the use of partitions as direct subnodes of the mtd device is discouraged and only supported for backward compatiblity reasons. Signed-off-by: Alex Maclean <monkeh@monkeh.net>
2018-08-01 20:32:34 +00:00
label = "firmware";
reg = <0x50000 0x3b0000>;
};
ralink: Build 8M image for 7Links PX-4885 7Links PX-4885 (clones) can also be purchased with 8MB flash. Creating images for these routers, use dtsi for common part Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> SVN-Revision: 42892
2014-10-13 19:41:36 +00:00
};
};
};
Reference in New Issue Copy Permalink