openwrt/target/linux/ipq40xx/patches-6.6/709-ARM-dts-qcom-ipq4019-add-QCA8075-PHY-Package-nodes.patch

68 lines
1.6 KiB
Diff
Raw Normal View History

From 5ac078c8fe18f3e8318547b8ed0ed782730c5039 Mon Sep 17 00:00:00 2001
From: Christian Marangi <ansuelsmth@gmail.com>
Date: Sat, 10 Feb 2024 22:28:27 +0100
Subject: [PATCH] ARM: dts: qcom: ipq4019: add QCA8075 PHY Package nodes
Add QCA8075 PHY Package nodes. The PHY nodes that were previously
defined never worked and actually never had a driver to correctly setup
these PHY. Now that we have a correct driver, correctly add the PHY
Package node and set the default value of 300mw for tx driver strength
following specification of ipq4019 SoC.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
arch/arm/boot/dts//qcom-ipq4019.dtsi | 35 +++++++++++++++---------
1 file changed, 22 insertions(+), 13 deletions(-)
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -725,24 +725,33 @@
reg = <0x90000 0x64>;
status = "disabled";
- ethphy0: ethernet-phy@0 {
+ ethernet-phy-package@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "qcom,qca8075-package";
reg = <0>;
- };
-
- ethphy1: ethernet-phy@1 {
- reg = <1>;
- };
- ethphy2: ethernet-phy@2 {
- reg = <2>;
- };
-
- ethphy3: ethernet-phy@3 {
- reg = <3>;
- };
+ qcom,tx-drive-strength-milliwatt = <300>;
- ethphy4: ethernet-phy@4 {
- reg = <4>;
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+
+ ethphy2: ethernet-phy@2 {
+ reg = <2>;
+ };
+
+ ethphy3: ethernet-phy@3 {
+ reg = <3>;
+ };
+
+ ethphy4: ethernet-phy@4 {
+ reg = <4>;
+ };
};
};