ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-27 17:18:59 +00:00
Code Issues Actions 9 Packages Projects Releases Wiki Activity
50f2f25d58
openwrt/target/linux/bcm27xx/patches-5.4/950-0412-ARM-dts-Clean-out-downstream-BCM2711-2838-files.patch

1847 lines
42 KiB
Diff
Raw Normal View History

bcm27xx: add linux 5.4 support Tested on bcm2710 (Raspberry Pi 3B). Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2020-02-29 08:25:20 +00:00
From 134e06abd2d002edfdac3561656ab9e8161b29a3 Mon Sep 17 00:00:00 2001
From: Phil Elwell <phil@raspberrypi.com>
Date: Fri, 31 Jan 2020 16:53:13 +0000
Subject: [PATCH] ARM: dts: Clean out downstream BCM2711/2838 files
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
---
arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 157 -----
arch/arm/boot/dts/bcm2711-rpi.dtsi | 7 -
arch/arm/boot/dts/bcm2711.dtsi | 890 --------------------------
arch/arm/boot/dts/bcm2838-rpi.dtsi | 25 -
arch/arm/boot/dts/bcm2838.dtsi | 733 ---------------------
5 files changed, 1812 deletions(-)
delete mode 100644 arch/arm/boot/dts/bcm2711-rpi-4-b.dts
delete mode 100644 arch/arm/boot/dts/bcm2711-rpi.dtsi
delete mode 100644 arch/arm/boot/dts/bcm2711.dtsi
delete mode 100644 arch/arm/boot/dts/bcm2838-rpi.dtsi
delete mode 100644 arch/arm/boot/dts/bcm2838.dtsi
--- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
+++ /dev/null
@@ -1,157 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-#include "bcm2711.dtsi"
-#include "bcm2835-rpi.dtsi"
-#include "bcm283x-rpi-usb-peripheral.dtsi"
-
-/ {
- compatible = "raspberrypi,4-model-b", "brcm,bcm2711";
- model = "Raspberry Pi 4 Model B";
-
- chosen {
- /* 8250 auxiliary UART instead of pl011 */
- stdout-path = "serial1:115200n8";
- };
-
- /* Will be filled by the bootloader */
- memory@0 {
- device_type = "memory";
- reg = <0 0 0>;
- };
-
- aliases {
- ethernet0 = &genet;
- };
-
- leds {
- act {
- gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
- };
-
- pwr {
- label = "PWR";
- gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
- };
- };
-
- wifi_pwrseq: wifi-pwrseq {
- compatible = "mmc-pwrseq-simple";
- reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
- };
-
- sd_io_1v8_reg: sd_io_1v8_reg {
- compatible = "regulator-gpio";
- regulator-name = "vdd-sd-io";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- regulator-settling-time-us = <5000>;
- gpios = <&expgpio 4 GPIO_ACTIVE_HIGH>;
- states = <1800000 0x1
- 3300000 0x0>;
- status = "okay";
- };
-};
-
-&firmware {
- expgpio: gpio {
- compatible = "raspberrypi,firmware-gpio";
- gpio-controller;
- #gpio-cells = <2>;
- gpio-line-names = "BT_ON",
- "WL_ON",
- "PWR_LED_OFF",
- "GLOBAL_RESET",
- "VDD_SD_IO_SEL",
- "CAM_GPIO",
- "",
- "";
- status = "okay";
- };
-};
-
-&pwm1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pwm1_0_gpio40 &pwm1_1_gpio41>;
- status = "okay";
-};
-
-/* SDHCI is used to control the SDIO for wireless */
-&sdhci {
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&emmc_gpio34>;
- bus-width = <4>;
- non-removable;
- mmc-pwrseq = <&wifi_pwrseq>;
- status = "okay";
-
- brcmf: wifi@1 {
- reg = <1>;
- compatible = "brcm,bcm4329-fmac";
- };
-};
-
-/* EMMC2 is used to drive the SD card */
-&emmc2 {
- vqmmc-supply = <&sd_io_1v8_reg>;
- broken-cd;
- status = "okay";
-};
-
-&genet {
- phy-handle = <&phy1>;
- phy-mode = "rgmii-rxid";
- status = "okay";
-};
-
-&genet_mdio {
- phy1: ethernet-phy@1 {
- /* No PHY interrupt */
- reg = <0x1>;
- };
-};
-
-/* uart0 communicates with the BT module */
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32>;
- uart-has-rtscts;
- status = "okay";
-
- bluetooth {
- compatible = "brcm,bcm43438-bt";
- max-speed = <2000000>;
- shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
- };
-};
-
-/* uart1 is mapped to the pin header */
-&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart1_gpio14>;
- status = "okay";
-};
-
-&vchiq {
- interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-/ {
- __overrides__ {
- act_led_gpio = <&act_led>,"gpios:4";
- act_led_activelow = <&act_led>,"gpios:8";
- act_led_trigger = <&act_led>,"linux,default-trigger";
-
- pwr_led_gpio = <&pwr_led>,"gpios:4";
- pwr_led_activelow = <&pwr_led>,"gpios:8";
- pwr_led_trigger = <&pwr_led>,"linux,default-trigger";
-
- eth_led0 = <&phy1>,"led-modes:0";
- eth_led1 = <&phy1>,"led-modes:4";
-
- sd_poll_once = <&emmc2>, "non-removable?";
- };
-};
--- a/arch/arm/boot/dts/bcm2711-rpi.dtsi
+++ /dev/null
@@ -1,7 +0,0 @@
-#include "bcm2708-rpi.dtsi"
-#include "bcm2838-rpi.dtsi"
-
-&v3d {
- /* Undo the overwriting by bcm270x.dtsi */
- power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>;
-};
--- a/arch/arm/boot/dts/bcm2711.dtsi
+++ /dev/null
@@ -1,890 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "bcm283x.dtsi"
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/soc/bcm2835-pm.h>
-
-/ {
- compatible = "brcm,bcm2711";
-
- #address-cells = <2>;
- #size-cells = <1>;
-
- interrupt-parent = <&gicv2>;
-
- reserved-memory {
- #address-cells = <2>;
- #size-cells = <1>;
- ranges;
-
- /*
- * arm64 reserves the CMA by default somewhere in ZONE_DMA32,
- * that's not good enough for the BCM2711 as some devices can
- * only address the lower 1G of memory (ZONE_DMA).
- */
- linux,cma {
- compatible = "shared-dma-pool";
- size = <0x2000000>; /* 32MB */
- alloc-ranges = <0x0 0x00000000 0x40000000>;
- reusable;
- linux,cma-default;
- };
- };
-
-
- soc {
- /*
- * Defined ranges:
- * Common BCM283x peripherals
- * BCM2711-specific peripherals
- * ARM-local peripherals
- */
- ranges = <0x7e000000 0x0 0xfe000000 0x01800000>,
- <0x7c000000 0x0 0xfc000000 0x02000000>,
- <0x40000000 0x0 0xff800000 0x00800000>;
- /* Emulate a contiguous 30-bit address range for DMA */
- dma-ranges = <0xc0000000 0x0 0x00000000 0x40000000>;
-
- /*
- * This node is the provider for the enable-method for
- * bringing up secondary cores.
- */
- local_intc: local_intc@40000000 {
- compatible = "brcm,bcm2836-l1-intc";
- reg = <0x40000000 0x100>;
- };
-
- gicv2: interrupt-controller@40041000 {
- interrupt-controller;
- #interrupt-cells = <3>;
- compatible = "arm,gic-400";
- reg = <0x40041000 0x1000>,
- <0x40042000 0x2000>,
- <0x40044000 0x2000>,
- <0x40046000 0x2000>;
- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
- IRQ_TYPE_LEVEL_HIGH)>;
- };
-
- dma: dma@7e007000 {
- compatible = "brcm,bcm2835-dma";
- reg = <0x7e007000 0xb00>;
- interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
- /* DMA lite 7 - 10 */
- <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "dma0",
- "dma1",
- "dma2",
- "dma3",
- "dma4",
- "dma5",
- "dma6",
- "dma7",
- "dma8",
- "dma9",
- "dma10";
- #dma-cells = <1>;
- brcm,dma-channel-mask = <0x07f5>;
- };
-
- pm: watchdog@7e100000 {
- compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt";
- #power-domain-cells = <1>;
- #reset-cells = <1>;
- reg = <0x7e100000 0x114>,
- <0x7e00a000 0x24>,
- <0x7ec11000 0x20>;
- clocks = <&clocks BCM2835_CLOCK_V3D>,
- <&clocks BCM2835_CLOCK_PERI_IMAGE>,
- <&clocks BCM2835_CLOCK_H264>,
- <&clocks BCM2835_CLOCK_ISP>;
- clock-names = "v3d", "peri_image", "h264", "isp";
- system-power-controller;
- };
-
- rng@7e104000 {
- interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
-
- /* RNG is incompatible with brcm,bcm2835-rng */
- status = "disabled";
- };
-
- uart2: serial@7e201400 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x7e201400 0x200>;
- interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clocks BCM2835_CLOCK_UART>,
- <&clocks BCM2835_CLOCK_VPU>;
- clock-names = "uartclk", "apb_pclk";
- arm,primecell-periphid = <0x00241011>;
- status = "disabled";
- };
-
- uart3: serial@7e201600 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x7e201600 0x200>;
- interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clocks BCM2835_CLOCK_UART>,
- <&clocks BCM2835_CLOCK_VPU>;
- clock-names = "uartclk", "apb_pclk";
- arm,primecell-periphid = <0x00241011>;
- status = "disabled";
- };
-
- uart4: serial@7e201800 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x7e201800 0x200>;
- interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clocks BCM2835_CLOCK_UART>,
- <&clocks BCM2835_CLOCK_VPU>;
- clock-names = "uartclk", "apb_pclk";
- arm,primecell-periphid = <0x00241011>;
- status = "disabled";
- };
-
- uart5: serial@7e201a00 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x7e201a00 0x200>;
- interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clocks BCM2835_CLOCK_UART>,
- <&clocks BCM2835_CLOCK_VPU>;
- clock-names = "uartclk", "apb_pclk";
- arm,primecell-periphid = <0x00241011>;
- status = "disabled";
- };
-
- spi3: spi@7e204600 {
- compatible = "brcm,bcm2835-spi";
- reg = <0x7e204600 0x0200>;
- interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clocks BCM2835_CLOCK_VPU>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- spi4: spi@7e204800 {
- compatible = "brcm,bcm2835-spi";
- reg = <0x7e204800 0x0200>;
- interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clocks BCM2835_CLOCK_VPU>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- spi5: spi@7e204a00 {
- compatible = "brcm,bcm2835-spi";
- reg = <0x7e204a00 0x0200>;
- interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clocks BCM2835_CLOCK_VPU>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- spi6: spi@7e204c00 {
- compatible = "brcm,bcm2835-spi";
- reg = <0x7e204c00 0x0200>;
- interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clocks BCM2835_CLOCK_VPU>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- i2c3: i2c@7e205600 {
- compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
- reg = <0x7e205600 0x200>;
- interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clocks BCM2835_CLOCK_VPU>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- i2c4: i2c@7e205800 {
- compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
- reg = <0x7e205800 0x200>;
- interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clocks BCM2835_CLOCK_VPU>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- i2c5: i2c@7e205a00 {
- compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
- reg = <0x7e205a00 0x200>;
- interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clocks BCM2835_CLOCK_VPU>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- i2c6: i2c@7e205c00 {
- compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
- reg = <0x7e205c00 0x200>;
- interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clocks BCM2835_CLOCK_VPU>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- pwm1: pwm@7e20c800 {
- compatible = "brcm,bcm2835-pwm";
- reg = <0x7e20c800 0x28>;
- clocks = <&clocks BCM2835_CLOCK_PWM>;
- assigned-clocks = <&clocks BCM2835_CLOCK_PWM>;
- assigned-clock-rates = <10000000>;
- #pwm-cells = <2>;
- status = "disabled";
- };
-
- emmc2: emmc2@7e340000 {
- compatible = "brcm,bcm2711-emmc2";
- reg = <0x7e340000 0x100>;
- interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clocks BCM2711_CLOCK_EMMC2>;
- status = "disabled";
- };
-
- hvs@7e400000 {
- interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
- };
- };
-
- arm-pmu {
- compatible = "arm,cortex-a72-pmu", "arm,armv8-pmuv3";
- interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
- };
-
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
- IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
- IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) |
- IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
- IRQ_TYPE_LEVEL_LOW)>;
- /* This only applies to the ARMv7 stub */
- arm,cpu-registers-not-fw-configured;
- };
-
- cpus: cpus {
- #address-cells = <1>;
- #size-cells = <0>;
- enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit
-
- cpu0: cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a72";
- reg = <0>;
- enable-method = "spin-table";
- cpu-release-addr = <0x0 0x000000d8>;
- };
-
- cpu1: cpu@1 {
- device_type = "cpu";
- compatible = "arm,cortex-a72";
- reg = <1>;
- enable-method = "spin-table";
- cpu-release-addr = <0x0 0x000000e0>;
- };
-
- cpu2: cpu@2 {
- device_type = "cpu";
- compatible = "arm,cortex-a72";
- reg = <2>;
- enable-method = "spin-table";
- cpu-release-addr = <0x0 0x000000e8>;
- };
-
- cpu3: cpu@3 {
- device_type = "cpu";
- compatible = "arm,cortex-a72";
- reg = <3>;
- enable-method = "spin-table";
- cpu-release-addr = <0x0 0x000000f0>;
- };
- };
-
- scb {
- compatible = "simple-bus";
- #address-cells = <2>;
- #size-cells = <1>;
-
- ranges = <0x0 0x7c000000 0x0 0xfc000000 0x03800000>;
-
- genet: ethernet@7d580000 {
- compatible = "brcm,bcm2711-genet-v5";
- reg = <0x0 0x7d580000 0x10000>;
- #address-cells = <0x1>;
- #size-cells = <0x1>;
- interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
-
- genet_mdio: mdio@e14 {
- compatible = "brcm,genet-mdio-v5";
- reg = <0xe14 0x8>;
- reg-names = "mdio";
- #address-cells = <0x0>;
- #size-cells = <0x1>;
- };
- };
- };
-};
-
-&clk_osc {
- clock-frequency = <54000000>;
-};
-
-&clocks {
- compatible = "brcm,bcm2711-cprman";
-};
-
-&cpu_thermal {
- coefficients = <(-487) 410040>;
-};
-
-&dsi0 {
- interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&dsi1 {
- interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&gpio {
- compatible = "brcm,bcm2711-gpio";
- interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
-
- gpclk0_gpio49: gpclk0_gpio49 {
- pin-gpclk {
- pins = "gpio49";
- function = "alt1";
- bias-disable;
- };
- };
- gpclk1_gpio50: gpclk1_gpio50 {
- pin-gpclk {
- pins = "gpio50";
- function = "alt1";
- bias-disable;
- };
- };
- gpclk2_gpio51: gpclk2_gpio51 {
- pin-gpclk {
- pins = "gpio51";
- function = "alt1";
- bias-disable;
- };
- };
-
- i2c0_gpio46: i2c0_gpio46 {
- pin-sda {
- function = "alt0";
- pins = "gpio46";
- bias-pull-up;
- };
- pin-scl {
- function = "alt0";
- pins = "gpio47";
- bias-disable;
- };
- };
- i2c1_gpio46: i2c1_gpio46 {
- pin-sda {
- function = "alt1";
- pins = "gpio46";
- bias-pull-up;
- };
- pin-scl {
- function = "alt1";
- pins = "gpio47";
- bias-disable;
- };
- };
- i2c3_gpio2: i2c3_gpio2 {
- pin-sda {
- function = "alt5";
- pins = "gpio2";
- bias-pull-up;
- };
- pin-scl {
- function = "alt5";
- pins = "gpio3";
- bias-disable;
- };
- };
- i2c3_gpio4: i2c3_gpio4 {
- pin-sda {
- function = "alt5";
- pins = "gpio4";
- bias-pull-up;
- };
- pin-scl {
- function = "alt5";
- pins = "gpio5";
- bias-disable;
- };
- };
- i2c4_gpio6: i2c4_gpio6 {
- pin-sda {
- function = "alt5";
- pins = "gpio6";
- bias-pull-up;
- };
- pin-scl {
- function = "alt5";
- pins = "gpio7";
- bias-disable;
- };
- };
- i2c4_gpio8: i2c4_gpio8 {
- pin-sda {
- function = "alt5";
- pins = "gpio8";
- bias-pull-up;
- };
- pin-scl {
- function = "alt5";
- pins = "gpio9";
- bias-disable;
- };
- };
- i2c5_gpio10: i2c5_gpio10 {
- pin-sda {
- function = "alt5";
- pins = "gpio10";
- bias-pull-up;
- };
- pin-scl {
- function = "alt5";
- pins = "gpio11";
- bias-disable;
- };
- };
- i2c5_gpio12: i2c5_gpio12 {
- pin-sda {
- function = "alt5";
- pins = "gpio12";
- bias-pull-up;
- };
- pin-scl {
- function = "alt5";
- pins = "gpio13";
- bias-disable;
- };
- };
- i2c6_gpio0: i2c6_gpio0 {
- pin-sda {
- function = "alt5";
- pins = "gpio0";
- bias-pull-up;
- };
- pin-scl {
- function = "alt5";
- pins = "gpio1";
- bias-disable;
- };
- };
- i2c6_gpio22: i2c6_gpio22 {
- pin-sda {
- function = "alt5";
- pins = "gpio22";
- bias-pull-up;
- };
- pin-scl {
- function = "alt5";
- pins = "gpio23";
- bias-disable;
- };
- };
- i2c_slave_gpio8: i2c_slave_gpio8 {
- pins-i2c-slave {
- pins = "gpio8",
- "gpio9",
- "gpio10",
- "gpio11";
- function = "alt3";
- };
- };
-
- jtag_gpio48: jtag_gpio48 {
- pins-jtag {
- pins = "gpio48",
- "gpio49",
- "gpio50",
- "gpio51",
- "gpio52",
- "gpio53";
- function = "alt4";
- };
- };
-
- mii_gpio28: mii_gpio28 {
- pins-mii {
- pins = "gpio28",
- "gpio29",
- "gpio30",
- "gpio31";
- function = "alt4";
- };
- };
- mii_gpio36: mii_gpio36 {
- pins-mii {
- pins = "gpio36",
- "gpio37",
- "gpio38",
- "gpio39";
- function = "alt5";
- };
- };
-
- pcm_gpio50: pcm_gpio50 {
- pins-pcm {
- pins = "gpio50",
- "gpio51",
- "gpio52",
- "gpio53";
- function = "alt2";
- };
- };
-
- pwm0_0_gpio12: pwm0_0_gpio12 {
- pin-pwm {
- pins = "gpio12";
- function = "alt0";
- bias-disable;
- };
- };
- pwm0_0_gpio18: pwm0_0_gpio18 {
- pin-pwm {
- pins = "gpio18";
- function = "alt5";
- bias-disable;
- };
- };
- pwm1_0_gpio40: pwm1_0_gpio40 {
- pin-pwm {
- pins = "gpio40";
- function = "alt0";
- bias-disable;
- };
- };
- pwm0_1_gpio13: pwm0_1_gpio13 {
- pin-pwm {
- pins = "gpio13";
- function = "alt0";
- bias-disable;
- };
- };
- pwm0_1_gpio19: pwm0_1_gpio19 {
- pin-pwm {
- pins = "gpio19";
- function = "alt5";
- bias-disable;
- };
- };
- pwm1_1_gpio41: pwm1_1_gpio41 {
- pin-pwm {
- pins = "gpio41";
- function = "alt0";
- bias-disable;
- };
- };
- pwm0_1_gpio45: pwm0_1_gpio45 {
- pin-pwm {
- pins = "gpio45";
- function = "alt0";
- bias-disable;
- };
- };
- pwm0_0_gpio52: pwm0_0_gpio52 {
- pin-pwm {
- pins = "gpio52";
- function = "alt1";
- bias-disable;
- };
- };
- pwm0_1_gpio53: pwm0_1_gpio53 {
- pin-pwm {
- pins = "gpio53";
- function = "alt1";
- bias-disable;
- };
- };
-
- rgmii_gpio35: rgmii_gpio35 {
- pin-start-stop {
- pins = "gpio35";
- function = "alt4";
- };
- pin-rx-ok {
- pins = "gpio36";
- function = "alt4";
- };
- };
- rgmii_irq_gpio34: rgmii_irq_gpio34 {
- pin-irq {
- pins = "gpio34";
- function = "alt5";
- };
- };
- rgmii_irq_gpio39: rgmii_irq_gpio39 {
- pin-irq {
- pins = "gpio39";
- function = "alt4";
- };
- };
- rgmii_mdio_gpio28: rgmii_mdio_gpio28 {
- pins-mdio {
- pins = "gpio28",
- "gpio29";
- function = "alt5";
- };
- };
- rgmii_mdio_gpio37: rgmii_mdio_gpio37 {
- pins-mdio {
- pins = "gpio37",
- "gpio38";
- function = "alt4";
- };
- };
-
- spi0_gpio46: spi0_gpio46 {
- pins-spi {
- pins = "gpio46",
- "gpio47",
- "gpio48",
- "gpio49";
- function = "alt2";
- };
- };
- spi2_gpio46: spi2_gpio46 {
- pins-spi {
- pins = "gpio46",
- "gpio47",
- "gpio48",
- "gpio49",
- "gpio50";
- function = "alt5";
- };
- };
- spi3_gpio0: spi3_gpio0 {
- pins-spi {
- pins = "gpio0",
- "gpio1",
- "gpio2",
- "gpio3";
- function = "alt3";
- };
- };
- spi4_gpio4: spi4_gpio4 {
- pins-spi {
- pins = "gpio4",
- "gpio5",
- "gpio6",
- "gpio7";
- function = "alt3";
- };
- };
- spi5_gpio12: spi5_gpio12 {
- pins-spi {
- pins = "gpio12",
- "gpio13",
- "gpio14",
- "gpio15";
- function = "alt3";
- };
- };
- spi6_gpio18: spi6_gpio18 {
- pins-spi {
- pins = "gpio18",
- "gpio19",
- "gpio20",
- "gpio21";
- function = "alt3";
- };
- };
-
- uart2_gpio0: uart2_gpio0 {
- pin-tx {
- pins = "gpio0";
- function = "alt4";
- bias-disable;
- };
- pin-rx {
- pins = "gpio1";
- function = "alt4";
- bias-pull-up;
- };
- };
- uart2_ctsrts_gpio2: uart2_ctsrts_gpio2 {
- pin-cts {
- pins = "gpio2";
- function = "alt4";
- bias-pull-up;
- };
- pin-rts {
- pins = "gpio3";
- function = "alt4";
- bias-disable;
- };
- };
- uart3_gpio4: uart3_gpio4 {
- pin-tx {
- pins = "gpio4";
- function = "alt4";
- bias-disable;
- };
- pin-rx {
- pins = "gpio5";
- function = "alt4";
- bias-pull-up;
- };
- };
- uart3_ctsrts_gpio6: uart3_ctsrts_gpio6 {
- pin-cts {
- pins = "gpio6";
- function = "alt4";
- bias-pull-up;
- };
- pin-rts {
- pins = "gpio7";
- function = "alt4";
- bias-disable;
- };
- };
- uart4_gpio8: uart4_gpio8 {
- pin-tx {
- pins = "gpio8";
- function = "alt4";
- bias-disable;
- };
- pin-rx {
- pins = "gpio9";
- function = "alt4";
- bias-pull-up;
- };
- };
- uart4_ctsrts_gpio10: uart4_ctsrts_gpio10 {
- pin-cts {
- pins = "gpio10";
- function = "alt4";
- bias-pull-up;
- };
- pin-rts {
- pins = "gpio11";
- function = "alt4";
- bias-disable;
- };
- };
- uart5_gpio12: uart5_gpio12 {
- pin-tx {
- pins = "gpio12";
- function = "alt4";
- bias-disable;
- };
- pin-rx {
- pins = "gpio13";
- function = "alt4";
- bias-pull-up;
- };
- };
- uart5_ctsrts_gpio14: uart5_ctsrts_gpio14 {
- pin-cts {
- pins = "gpio14";
- function = "alt4";
- bias-pull-up;
- };
- pin-rts {
- pins = "gpio15";
- function = "alt4";
- bias-disable;
- };
- };
-};
-
-&i2c0 {
- compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
- interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&i2c1 {
- compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
- interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&mailbox {
- interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&sdhci {
- interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&sdhost {
- interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&spi {
- interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&spi1 {
- interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&spi2 {
- interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&system_timer {
- interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&txp {
- interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&uart0 {
- interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&uart1 {
- interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&usb {
- interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&vec {
- interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
-};
--- a/arch/arm/boot/dts/bcm2838-rpi.dtsi
+++ /dev/null
@@ -1,25 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-
-/ {
- soc {
- /delete-node/ mailbox@7e00b840;
- };
-};
-
-&scb {
- vchiq: mailbox@7e00b840 {
- compatible = "brcm,bcm2838-vchiq";
- reg = <0 0x7e00b840 0x3c>;
- interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
- };
-};
-
-&dma {
- /* The VPU firmware uses DMA channel 11 for VCHIQ */
- brcm,dma-channel-mask = <0x1f5>;
-};
-
-&dma40 {
- /* The VPU firmware DMA channel 11 for VCHIQ */
- brcm,dma-channel-mask = <0x7000>;
-};
--- a/arch/arm/boot/dts/bcm2838.dtsi
+++ /dev/null
@@ -1,733 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "bcm283x.dtsi"
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/soc/bcm2835-pm.h>
-
-/ {
- compatible = "brcm,bcm2838";
-
- #address-cells = <2>;
- #size-cells = <1>;
-
- interrupt-parent = <&gicv2>;
-
- soc {
- ranges = <0x7e000000 0x0 0xfe000000 0x01800000>,
- <0x7c000000 0x0 0xfc000000 0x02000000>,
- <0x40000000 0x0 0xff800000 0x00800000>;
- /* Emulate a contiguous 30-bit address range for DMA */
- dma-ranges = <0xc0000000 0x0 0x00000000 0x3c000000>;
-
- /delete-node/ interrupt-controller@7e00f300;
- /delete-node/ v3d@7ec00000;
-
- local_intc: local_intc@40000000 {
- compatible = "brcm,bcm2836-l1-intc";
- reg = <0x40000000 0x100>;
- };
-
- gicv2: interrupt-controller@40041000 {
- interrupt-controller;
- #interrupt-cells = <3>;
- compatible = "arm,gic-400";
- reg = <0x40041000 0x1000>,
- <0x40042000 0x2000>,
- <0x40044000 0x2000>,
- <0x40046000 0x2000>;
- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
- IRQ_TYPE_LEVEL_HIGH)>;
- };
-
- thermal: thermal@7d5d2200 {
- compatible = "brcm,avs-tmon-bcm2838";
- reg = <0x7d5d2200 0x2c>;
- interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "tmon";
- clocks = <&clocks BCM2835_CLOCK_TSENS>;
- #thermal-sensor-cells = <0>;
- status = "okay";
- };
-
- pm: watchdog@7e100000 {
- reg = <0x7e100000 0x114>,
- <0x7e00a000 0x24>,
- <0x7ec11000 0x20>;
- };
-
- rng@7e104000 {
- interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- uart2: serial@7e201400 {
- compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
- reg = <0x7e201400 0x200>;
- interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clocks BCM2835_CLOCK_UART>,
- <&clocks BCM2835_CLOCK_VPU>;
- clock-names = "uartclk", "apb_pclk";
- arm,primecell-periphid = <0x00241011>;
- status = "disabled";
- };
-
- uart3: serial@7e201600 {
- compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
- reg = <0x7e201600 0x200>;
- interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clocks BCM2835_CLOCK_UART>,
- <&clocks BCM2835_CLOCK_VPU>;
- clock-names = "uartclk", "apb_pclk";
- arm,primecell-periphid = <0x00241011>;
- status = "disabled";
- };
-
- uart4: serial@7e201800 {
- compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
- reg = <0x7e201800 0x200>;
- interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clocks BCM2835_CLOCK_UART>,
- <&clocks BCM2835_CLOCK_VPU>;
- clock-names = "uartclk", "apb_pclk";
- arm,primecell-periphid = <0x00241011>;
- status = "disabled";
- };
-
- uart5: serial@7e201a00 {
- compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
- reg = <0x7e201a00 0x200>;
- interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clocks BCM2835_CLOCK_UART>,
- <&clocks BCM2835_CLOCK_VPU>;
- clock-names = "uartclk", "apb_pclk";
- arm,primecell-periphid = <0x00241011>;
- status = "disabled";
- };
-
- spi@7e204000 {
- reg = <0x7e204000 0x0200>;
- interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- spi3: spi@7e204600 {
- compatible = "brcm,bcm2835-spi";
- reg = <0x7e204600 0x0200>;
- interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clocks BCM2835_CLOCK_VPU>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- spi4: spi@7e204800 {
- compatible = "brcm,bcm2835-spi";
- reg = <0x7e204800 0x0200>;
- interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clocks BCM2835_CLOCK_VPU>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- spi5: spi@7e204a00 {
- compatible = "brcm,bcm2835-spi";
- reg = <0x7e204a00 0x0200>;
- interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clocks BCM2835_CLOCK_VPU>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- spi6: spi@7e204c00 {
- compatible = "brcm,bcm2835-spi";
- reg = <0x7e204c00 0x0200>;
- interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clocks BCM2835_CLOCK_VPU>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- i2c3: i2c@7e205600 {
- compatible = "brcm,bcm2835-i2c";
- reg = <0x7e205600 0x200>;
- interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clocks BCM2835_CLOCK_VPU>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- i2c4: i2c@7e205800 {
- compatible = "brcm,bcm2835-i2c";
- reg = <0x7e205800 0x200>;
- interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clocks BCM2835_CLOCK_VPU>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- i2c5: i2c@7e205a00 {
- compatible = "brcm,bcm2835-i2c";
- reg = <0x7e205a00 0x200>;
- interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clocks BCM2835_CLOCK_VPU>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- i2c6: i2c@7e205c00 {
- compatible = "brcm,bcm2835-i2c";
- reg = <0x7e205c00 0x200>;
- interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clocks BCM2835_CLOCK_VPU>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- pwm1: pwm@7e20c800 {
- compatible = "brcm,bcm2835-pwm";
- reg = <0x7e20c800 0x28>;
- clocks = <&clocks BCM2835_CLOCK_PWM>;
- assigned-clocks = <&clocks BCM2835_CLOCK_PWM>;
- assigned-clock-rates = <10000000>;
- #pwm-cells = <2>;
- status = "disabled";
- };
-
- emmc2: emmc2@7e340000 {
- compatible = "brcm,bcm2711-emmc2";
- status = "okay";
- interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clocks BCM2711_CLOCK_EMMC2>;
- reg = <0x7e340000 0x100>;
- };
-
- hvs@7e400000 {
- interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
- };
- };
-
- arm-pmu {
- compatible = "arm,cortex-a72-pmu";
- interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
- };
-
- timer {
- compatible = "arm,armv7-timer";
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
- IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
- IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) |
- IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
- IRQ_TYPE_LEVEL_LOW)>;
- arm,cpu-registers-not-fw-configured;
- };
-
- cpus: cpus {
- #address-cells = <1>;
- #size-cells = <0>;
- enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit
-
- cpu0: cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a72";
- reg = <0>;
- enable-method = "spin-table";
- cpu-release-addr = <0x0 0x000000d8>;
- };
-
- cpu1: cpu@1 {
- device_type = "cpu";
- compatible = "arm,cortex-a72";
- reg = <1>;
- enable-method = "spin-table";
- cpu-release-addr = <0x0 0x000000e0>;
- };
-
- cpu2: cpu@2 {
- device_type = "cpu";
- compatible = "arm,cortex-a72";
- reg = <2>;
- enable-method = "spin-table";
- cpu-release-addr = <0x0 0x000000e8>;
- };
-
- cpu3: cpu@3 {
- device_type = "cpu";
- compatible = "arm,cortex-a72";
- reg = <3>;
- enable-method = "spin-table";
- cpu-release-addr = <0x0 0x000000f0>;
- };
- };
-
- v3dbus {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <2>;
- ranges = <0x7c500000 0x0 0xfc500000 0x0 0x03300000>,
- <0x40000000 0x0 0xff800000 0x0 0x00800000>;
- dma-ranges = <0x00000000 0x0 0x00000000 0x4 0x00000000>;
-
- v3d: v3d@7ec04000 {
- compatible = "brcm,2711-v3d";
- reg =
- <0x7ec00000 0x0 0x4000>,
- <0x7ec04000 0x0 0x4000>;
- reg-names = "hub", "core0";
-
- power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>;
- resets = <&pm BCM2835_RESET_V3D>;
- clocks = <&clocks BCM2835_CLOCK_V3D>;
- interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
- status = "okay";
- };
- };
-
- scb: scb {
- compatible = "simple-bus";
- #address-cells = <2>;
- #size-cells = <1>;
-
- ranges = <0x0 0x7c000000 0x0 0xfc000000 0x03800000>,
- <0x0 0x40000000 0x0 0xff800000 0x00800000>,
- <0x6 0x00000000 0x6 0x00000000 0x40000000>,
- <0x0 0x00000000 0x0 0x00000000 0xfc000000>;
- dma-ranges = <0x0 0x00000000 0x0 0x00000000 0xfc000000>;
-
- pcie_0: pcie@7d500000 {
- reg = <0x0 0x7d500000 0x9310>,
- <0x0 0x7e00f300 0x20>;
- msi-controller;
- msi-parent = <&pcie_0>;
- #address-cells = <3>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- bus-range = <0x0 0x01>;
- compatible = "brcm,bcm2711b0-pcie", // Safe value
- "brcm,bcm2711-pcie",
- "brcm,pci-plat-dev";
- max-link-speed = <2>;
- tot-num-pcie = <1>;
- linux,pci-domain = <0>;
- interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "pcie", "msi";
- interrupt-map-mask = <0x0 0x0 0x0 0x7>;
- interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143
- IRQ_TYPE_LEVEL_HIGH
- 0 0 0 2 &gicv2 GIC_SPI 144
- IRQ_TYPE_LEVEL_HIGH
- 0 0 0 3 &gicv2 GIC_SPI 145
- IRQ_TYPE_LEVEL_HIGH
- 0 0 0 4 &gicv2 GIC_SPI 146
- IRQ_TYPE_LEVEL_HIGH>;
-
- /* Map outbound accesses from scb:0x6_00000000-03ffffff
- * to pci:0x0_f8000000-fbffffff
- */
- ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000
- 0x0 0x04000000>;
- /* Map inbound accesses from pci:0x0_00000000..ffffffff
- * to scb:0x0_00000000-ffffffff
- */
- dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000
- 0x1 0x00000000>;
- status = "okay";
- };
-
- genet: ethernet@7d580000 {
- compatible = "brcm,bcm2711-genet-v5", "brcm,genet-v5";
- reg = <0x0 0x7d580000 0x10000>;
- #address-cells = <0x1>;
- #size-cells = <0x1>;
- interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
-
- genet_mdio: mdio@e14 {
- #address-cells = <0x0>;
- #size-cells = <0x1>;
- compatible = "brcm,genet-mdio-v5";
- reg = <0xe14 0x8>;
- reg-names = "mdio";
- };
- };
-
- dma40: dma@7e007b00 {
- compatible = "brcm,bcm2838-dma";
- reg = <0x0 0x7e007b00 0x400>;
- interrupts =
- <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, /* dma4 11 */
- <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, /* dma4 12 */
- <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, /* dma4 13 */
- <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; /* dma4 14 */
- interrupt-names = "dma11",
- "dma12",
- "dma13",
- "dma14";
- #dma-cells = <1>;
- brcm,dma-channel-mask = <0x7800>;
- };
- /* DMA4 - 40 bit DMA engines */
-
- xhci: xhci@7e9c0000 {
- compatible = "generic-xhci";
- status = "disabled";
- reg = <0x0 0x7e9c0000 0x100000>;
- interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- hevc-decoder@7eb00000 {
- compatible = "raspberrypi,rpivid-hevc-decoder";
- reg = <0x0 0x7eb00000 0x10000>;
- status = "okay";
- };
-
- rpivid-local-intc@7eb10000 {
- compatible = "raspberrypi,rpivid-local-intc";
- reg = <0x0 0x7eb10000 0x1000>;
- status = "okay";
- interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- h264-decoder@7eb20000 {
- compatible = "raspberrypi,rpivid-h264-decoder";
- reg = <0x0 0x7eb20000 0x10000>;
- status = "okay";
- };
-
- vp9-decoder@7eb30000 {
- compatible = "raspberrypi,rpivid-vp9-decoder";
- reg = <0x0 0x7eb30000 0x10000>;
- status = "okay";
- };
- };
-};
-
-&clk_osc {
- clock-frequency = <54000000>;
-};
-
-&clocks {
- compatible = "brcm,bcm2711-cprman";
-};
-
-&cpu_thermal {
- coefficients = <(-487) 410040>;
-};
-
-&dsi0 {
- interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&dsi1 {
- interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&gpio {
- compatible = "brcm,bcm2711-gpio", "brcm,bcm2835-gpio";
-
- gpclk0_gpio49: gpclk0_gpio49 {
- brcm,pins = <49>;
- brcm,function = <BCM2835_FSEL_ALT1>;
- brcm,pull = <BCM2835_PUD_OFF>;
- };
- gpclk1_gpio50: gpclk1_gpio50 {
- brcm,pins = <50>;
- brcm,function = <BCM2835_FSEL_ALT1>;
- brcm,pull = <BCM2835_PUD_OFF>;
- };
- gpclk2_gpio51: gpclk2_gpio51 {
- brcm,pins = <51>;
- brcm,function = <BCM2835_FSEL_ALT1>;
- brcm,pull = <BCM2835_PUD_OFF>;
- };
-
- i2c0_gpio46: i2c0_gpio46 {
- brcm,pins = <46 47>;
- brcm,function = <BCM2835_FSEL_ALT0>;
- };
- i2c1_gpio46: i2c1_gpio46 {
- brcm,pins = <46 47>;
- brcm,function = <BCM2835_FSEL_ALT1>;
- };
- i2c3_gpio2: i2c3_gpio2 {
- brcm,pins = <2 3>;
- brcm,function = <BCM2835_FSEL_ALT5>;
- };
- i2c3_gpio4: i2c3_gpio4 {
- brcm,pins = <4 5>;
- brcm,function = <BCM2835_FSEL_ALT5>;
- };
- i2c4_gpio6: i2c4_gpio6 {
- brcm,pins = <6 7>;
- brcm,function = <BCM2835_FSEL_ALT5>;
- };
- i2c4_gpio8: i2c4_gpio8 {
- brcm,pins = <8 9>;
- brcm,function = <BCM2835_FSEL_ALT5>;
- };
- i2c5_gpio10: i2c5_gpio10 {
- brcm,pins = <10 11>;
- brcm,function = <BCM2835_FSEL_ALT5>;
- };
- i2c5_gpio12: i2c5_gpio12 {
- brcm,pins = <12 13>;
- brcm,function = <BCM2835_FSEL_ALT5>;
- };
- i2c6_gpio0: i2c6_gpio0 {
- brcm,pins = <0 1>;
- brcm,function = <BCM2835_FSEL_ALT5>;
- };
- i2c6_gpio22: i2c6_gpio22 {
- brcm,pins = <22 23>;
- brcm,function = <BCM2835_FSEL_ALT5>;
- };
- i2c_slave_gpio8: i2c_slave_gpio8 {
- brcm,pins = <8 9 10 11>;
- brcm,function = <BCM2835_FSEL_ALT3>;
- };
-
- jtag_gpio48: jtag_gpio48 {
- brcm,pins = <48 49 50 51 52 53>;
- brcm,function = <BCM2835_FSEL_ALT4>;
- };
-
- mii_gpio28: mii_gpio28 {
- brcm,pins = <28 29 30 31>;
- brcm,function = <BCM2835_FSEL_ALT4>;
- };
- mii_gpio36: mii_gpio36 {
- brcm,pins = <36 37 38 39>;
- brcm,function = <BCM2835_FSEL_ALT5>;
- };
-
- pcm_gpio50: pcm_gpio50 {
- brcm,pins = <50 51 52 53>;
- brcm,function = <BCM2835_FSEL_ALT2>;
- };
-
- pwm0_gpio52: pwm0_gpio52 {
- brcm,pins = <52>;
- brcm,function = <BCM2835_FSEL_ALT1>;
- brcm,pull = <BCM2835_PUD_OFF>;
- };
- pwm1_gpio53: pwm1_gpio53 {
- brcm,pins = <53>;
- brcm,function = <BCM2835_FSEL_ALT1>;
- brcm,pull = <BCM2835_PUD_OFF>;
- };
-
- /* The following group consists of:
- * RGMII_START_STOP
- * RGMII_RX_OK
- */
- rgmii_gpio35: rgmii_gpio35 {
- brcm,pins = <35 36>;
- brcm,function = <BCM2835_FSEL_ALT4>;
- };
- rgmii_irq_gpio34: rgmii_irq_gpio34 {
- brcm,pins = <34>;
- brcm,function = <BCM2835_FSEL_ALT5>;
- };
- rgmii_irq_gpio39: rgmii_irq_gpio39 {
- brcm,pins = <39>;
- brcm,function = <BCM2835_FSEL_ALT4>;
- };
- rgmii_mdio_gpio28: rgmii_mdio_gpio28 {
- brcm,pins = <28 29>;
- brcm,function = <BCM2835_FSEL_ALT5>;
- };
- rgmii_mdio_gpio37: rgmii_mdio_gpio37 {
- brcm,pins = <37 38>;
- brcm,function = <BCM2835_FSEL_ALT4>;
- };
-
- spi0_gpio46: spi0_gpio46 {
- brcm,pins = <46 47 48 49>;
- brcm,function = <BCM2835_FSEL_ALT2>;
- };
- spi2_gpio46: spi2_gpio46 {
- brcm,pins = <46 47 48 49 50>;
- brcm,function = <BCM2835_FSEL_ALT5>;
- };
- spi3_gpio0: spi3_gpio0 {
- brcm,pins = <0 1 2 3>;
- brcm,function = <BCM2835_FSEL_ALT3>;
- };
- spi4_gpio4: spi4_gpio4 {
- brcm,pins = <4 5 6 7>;
- brcm,function = <BCM2835_FSEL_ALT3>;
- };
- spi5_gpio12: spi5_gpio12 {
- brcm,pins = <12 13 14 15>;
- brcm,function = <BCM2835_FSEL_ALT3>;
- };
- spi6_gpio18: spi6_gpio18 {
- brcm,pins = <18 19 20 21>;
- brcm,function = <BCM2835_FSEL_ALT3>;
- };
-
- uart2_gpio0: uart2_gpio0 {
- brcm,pins = <0 1>;
- brcm,function = <BCM2835_FSEL_ALT4>;
- brcm,pull = <BCM2835_PUD_OFF BCM2835_PUD_UP>;
- };
- uart2_ctsrts_gpio2: uart2_ctsrts_gpio2 {
- brcm,pins = <2 3>;
- brcm,function = <BCM2835_FSEL_ALT4>;
- brcm,pull = <BCM2835_PUD_UP BCM2835_PUD_OFF>;
- };
- uart3_gpio4: uart3_gpio4 {
- brcm,pins = <4 5>;
- brcm,function = <BCM2835_FSEL_ALT4>;
- brcm,pull = <BCM2835_PUD_OFF BCM2835_PUD_UP>;
- };
- uart3_ctsrts_gpio6: uart3_ctsrts_gpio6 {
- brcm,pins = <6 7>;
- brcm,function = <BCM2835_FSEL_ALT4>;
- brcm,pull = <BCM2835_PUD_UP BCM2835_PUD_OFF>;
- };
- uart4_gpio8: uart4_gpio8 {
- brcm,pins = <8 9>;
- brcm,function = <BCM2835_FSEL_ALT4>;
- brcm,pull = <BCM2835_PUD_OFF BCM2835_PUD_UP>;
- };
- uart4_ctsrts_gpio10: uart4_ctsrts_gpio10 {
- brcm,pins = <10 11>;
- brcm,function = <BCM2835_FSEL_ALT4>;
- brcm,pull = <BCM2835_PUD_UP BCM2835_PUD_OFF>;
- };
- uart5_gpio12: uart5_gpio12 {
- brcm,pins = <12 13>;
- brcm,function = <BCM2835_FSEL_ALT4>;
- brcm,pull = <BCM2835_PUD_OFF BCM2835_PUD_UP>;
- };
- uart5_ctsrts_gpio14: uart5_ctsrts_gpio14 {
- brcm,pins = <14 15>;
- brcm,function = <BCM2835_FSEL_ALT4>;
- brcm,pull = <BCM2835_PUD_UP BCM2835_PUD_OFF>;
- };
-};
-
-&vec {
- interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&usb {
- interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
-};
-
-&hdmi {
- interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&uart1 {
- interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&spi1 {
- interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&spi2 {
- interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&csi0 {
- interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&csi1 {
- interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&sdhci {
- interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&i2c0 {
- interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&i2c1 {
- interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&i2c2 {
- interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&gpio {
- interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&mailbox {
- interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&rng {
- compatible = "brcm,bcm2711-rng200", "brcm,bcm2838-rng200";
-};
-
-&sdhost {
- interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&system_timer {
- interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&uart0 {
- interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&dma {
- reg = <0x7e007000 0xb00>;
- interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, /* dmalite 7 */
- <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, /* dmalite 8 */
- <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, /* dmalite 9 */
- <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; /* dmalite 10 */
- interrupt-names = "dma0",
- "dma1",
- "dma2",
- "dma3",
- "dma4",
- "dma5",
- "dma6",
- "dma7",
- "dma8",
- "dma9",
- "dma10";
- brcm,dma-channel-mask = <0x07f5>;
-};
-
-&txp {
- interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-};
Reference in New Issue Copy Permalink