openwrt/target/linux/brcm2708/patches-4.14/950-0106-build-arm64-Add-rules-for-.dtbo-files-for-dts-overla.patch

From ab6c2faa1198b24b3017237df94490ecf7709100 Mon Sep 17 00:00:00 2001
From: Khem Raj <raj.khem@gmail.com>
Date: Fri, 10 Feb 2017 17:57:08 -0800
Subject: [PATCH 106/454] build/arm64: Add rules for .dtbo files for dts
 overlays

We now create overlays as .dtbo files.

Signed-off-by: Khem Raj <raj.khem@gmail.com>
---
 arch/arm64/Makefile | 3 +++
 1 file changed, 3 insertions(+)

--- a/arch/arm64/Makefile
+++ b/arch/arm64/Makefile
@@ -132,6 +132,9 @@ zinstall install:
 %.dtb: scripts
 	$(Q)$(MAKE) $(build)=$(boot)/dts $(boot)/dts/$@
 
+%.dtbo: | scripts
+	$(Q)$(MAKE) $(build)=$(boot)/dts MACHINE=$(MACHINE) $(boot)/dts/$@
+
 PHONY += dtbs dtbs_install
 
 dtbs: prepare scripts
brcm2708: add kernel 4.14 support Patch generation process: - rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable - git format-patch v4.14.89 Patches skipped during rebase: - lan78xx: Read MAC address from DT if present - lan78xx: Enable LEDs and auto-negotiation - Revert "softirq: Let ksoftirqd do its job" - sc16is7xx: Fix for multi-channel stall - lan78xx: Ignore DT MAC address if already valid - lan78xx: Simple patch to prevent some crashes - tcp_write_queue_purge clears all the SKBs in the write queue - Revert "lan78xx: Simple patch to prevent some crashes" - lan78xx: Connect phy early - Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro - Revert "Revert "softirq: Let ksoftirqd do its job"" - ASoC: cs4265: SOC_SINGLE register value error fix - Revert "ASoC: cs4265: SOC_SINGLE register value error fix" - Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends" - Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"" Patches dropped after rebase: - net: Add non-mainline source for rtl8192cu wlan - net: Fix rtl8192cu build errors on other platforms - brcm: adds support for BCM43341 wifi - brcmfmac: Mute expected startup 'errors' - ARM64: Fix build break for RTL8187/RTL8192CU wifi - ARM64: Enable RTL8187/RTL8192CU wifi in build config - This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator - brcmfmac: add CLM download support - brcmfmac: request_firmware_direct is quieter - Sets the BCDC priority to constant 0 - brcmfmac: Disable ARP offloading when promiscuous - brcmfmac: Avoid possible out-of-bounds read - brcmfmac: Delete redundant length check - net: rtl8192cu: Normalize indentation - net: rtl8192cu: Fix implicit fallthrough warnings - Revert "Sets the BCDC priority to constant 0" - media: cxd2880: Bump to match 4.18.y version - media: cxd2880-spi: Bump to match 4.18.y version - Revert "mm: alloc_contig: re-allow CMA to compact FS pages" - Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages"" - cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with MEDIA_SUBDRV_AUTOSELECT - 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch - 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch Make I2C built-in instead of modular as in upstream defconfig; also the easiest way to get MFD_ARIZONA enabled, which is required by kmod-sound-soc-rpi-cirrus. Add missing compatible strings from 4.9/960-add-rasbperrypi-compatible.patch, using upstream names for compute modules. Add extra patch to enable the LEDs on lan78xx. Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y) Runtime-tested: bcm2708, bcm2710 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> 2018-11-10 11:03:18 +00:00			`From ab6c2faa1198b24b3017237df94490ecf7709100 Mon Sep 17 00:00:00 2001`
			`From: Khem Raj <raj.khem@gmail.com>`
			`Date: Fri, 10 Feb 2017 17:57:08 -0800`
			`Subject: [PATCH 106/454] build/arm64: Add rules for .dtbo files for dts`
			`overlays`

			`We now create overlays as .dtbo files.`

			`Signed-off-by: Khem Raj <raj.khem@gmail.com>`
			`---`
			`arch/arm64/Makefile \| 3 +++`
			`1 file changed, 3 insertions(+)`

			`--- a/arch/arm64/Makefile`
			`+++ b/arch/arm64/Makefile`
			`@@ -132,6 +132,9 @@ zinstall install:`
			`%.dtb: scripts`
			`$(Q)$(MAKE) $(build)=$(boot)/dts $(boot)/dts/$@`

			`+%.dtbo: \| scripts`
			`+ $(Q)$(MAKE) $(build)=$(boot)/dts MACHINE=$(MACHINE) $(boot)/dts/$@`
			`+`
			`PHONY += dtbs dtbs_install`

			`dtbs: prepare scripts`