mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-29 10:08:59 +00:00
71 lines
2.3 KiB
Diff
71 lines
2.3 KiB
Diff
|
From: Felix Fietkau <nbd@nbd.name>
|
||
|
|
Subject: net: phy: at803x: add support for AT8032
|
||
|
|
|
||
|
|
Like AT8030, this PHY needs the GPIO reset workaround
|
||
|
|
|
||
|
|
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
||
|
|
---
|
||
|
|
|
||
|
|
--- a/drivers/net/phy/at803x.c
|
||
|
|
+++ b/drivers/net/phy/at803x.c
|
||
|
|
@@ -62,6 +62,7 @@
|
||
|
|
|
||
|
|
#define ATH8030_PHY_ID 0x004dd076
|
||
|
|
#define ATH8031_PHY_ID 0x004dd074
|
||
|
|
+#define ATH8032_PHY_ID 0x004dd023
|
||
|
|
#define ATH8035_PHY_ID 0x004dd072
|
||
|
|
|
||
|
|
MODULE_DESCRIPTION("Atheros 803x PHY driver");
|
||
|
|
@@ -259,7 +260,8 @@ static int at803x_probe(struct phy_devic
|
||
|
|
if (!priv)
|
||
|
|
return -ENOMEM;
|
||
|
|
|
||
|
|
- if (phydev->drv->phy_id != ATH8030_PHY_ID)
|
||
|
|
+ if (phydev->drv->phy_id != ATH8030_PHY_ID &&
|
||
|
|
+ phydev->drv->phy_id != ATH8032_PHY_ID)
|
||
|
|
goto does_not_require_reset_workaround;
|
||
|
|
|
||
|
|
gpiod_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
|
||
|
|
@@ -335,7 +337,7 @@ static void at803x_link_change_notify(st
|
||
|
|
struct at803x_priv *priv = phydev->priv;
|
||
|
|
|
||
|
|
/*
|
||
|
|
- * Conduct a hardware reset for AT8030 every time a link loss is
|
||
|
|
+ * Conduct a hardware reset for AT8030/2 every time a link loss is
|
||
|
|
* signalled. This is necessary to circumvent a hardware bug that
|
||
|
|
* occurs when the cable is unplugged while TX packets are pending
|
||
|
|
* in the FIFO. In such cases, the FIFO enters an error mode it
|
||
|
|
@@ -447,6 +449,24 @@ static struct phy_driver at803x_driver[]
|
||
|
|
.aneg_done = at803x_aneg_done,
|
||
|
|
.ack_interrupt = &at803x_ack_interrupt,
|
||
|
|
.config_intr = &at803x_config_intr,
|
||
|
|
+}, {
|
||
|
|
+ /* ATHEROS 8032 */
|
||
|
|
+ .phy_id = ATH8032_PHY_ID,
|
||
|
|
+ .name = "Atheros 8032 ethernet",
|
||
|
|
+ .phy_id_mask = 0xffffffef,
|
||
|
|
+ .probe = at803x_probe,
|
||
|
|
+ .config_init = at803x_config_init,
|
||
|
|
+ .link_change_notify = at803x_link_change_notify,
|
||
|
|
+ .set_wol = at803x_set_wol,
|
||
|
|
+ .get_wol = at803x_get_wol,
|
||
|
|
+ .suspend = at803x_suspend,
|
||
|
|
+ .resume = at803x_resume,
|
||
|
|
+ .features = PHY_BASIC_FEATURES,
|
||
|
|
+ .flags = PHY_HAS_INTERRUPT,
|
||
|
|
+ .config_aneg = genphy_config_aneg,
|
||
|
|
+ .read_status = genphy_read_status,
|
||
|
|
+ .ack_interrupt = at803x_ack_interrupt,
|
||
|
|
+ .config_intr = at803x_config_intr,
|
||
|
|
} };
|
||
|
|
|
||
|
|
module_phy_driver(at803x_driver);
|
||
|
|
@@ -454,6 +474,7 @@ module_phy_driver(at803x_driver);
|
||
|
|
static struct mdio_device_id __maybe_unused atheros_tbl[] = {
|
||
|
|
{ ATH8030_PHY_ID, 0xffffffef },
|
||
|
|
{ ATH8031_PHY_ID, 0xffffffef },
|
||
|
|
+ { ATH8032_PHY_ID, 0xffffffef },
|
||
|
|
{ ATH8035_PHY_ID, 0xffffffef },
|
||
|
|
{ }
|
||
|
|
};
|