openwrt/target/linux/generic/pending-6.6/739-02-phy-add-driver-for-MediaTek-XFI-T-PHY.patch

499 lines
16 KiB
Diff
Raw Normal View History

From patchwork Thu Feb 1 21:53:06 2024
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
X-Patchwork-Submitter: Daniel Golle <daniel@makrotopia.org>
X-Patchwork-Id: 13541843
Date: Thu, 1 Feb 2024 21:53:06 +0000
From: Daniel Golle <daniel@makrotopia.org>
To: Bc-bocun Chen <bc-bocun.chen@mediatek.com>,
Chunfeng Yun <chunfeng.yun@mediatek.com>,
Vinod Koul <vkoul@kernel.org>,
Kishon Vijay Abraham I <kishon@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Daniel Golle <daniel@makrotopia.org>,
Qingfang Deng <dqfext@gmail.com>,
SkyLake Huang <SkyLake.Huang@mediatek.com>,
Matthias Brugger <matthias.bgg@gmail.com>,
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>,
Philipp Zabel <p.zabel@pengutronix.de>,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org, linux-phy@lists.infradead.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
netdev@vger.kernel.org
Subject: [PATCH 2/2] phy: add driver for MediaTek XFI T-PHY
Message-ID:
<dd6b40ea1f7f8459a9a2cfe7fa60c1108332ade6.1706823233.git.daniel@makrotopia.org>
References:
<702afb0c1246d95c90b22e57105304028bdd3083.1706823233.git.daniel@makrotopia.org>
MIME-Version: 1.0
Content-Disposition: inline
In-Reply-To:
<702afb0c1246d95c90b22e57105304028bdd3083.1706823233.git.daniel@makrotopia.org>
List-Id: Linux Phy Mailing list <linux-phy.lists.infradead.org>
Add driver for MediaTek's XFI T-PHY, 10 Gigabit/s Ethernet SerDes PHY
which can be found in the MT7988 SoC.
The PHY can operates only in PHY_MODE_ETHERNET, the submode is one of
PHY_INTERFACE_MODE_* corresponding to the supported modes:
* USXGMII \
* 10GBase-R }- USXGMII PCS - XGDM \
* 5GBase-R / \
}- Ethernet MAC
* 2500Base-X \ /
* 1000Base-X }- LynxI PCS - GDM /
* Cisco SGMII (MAC side) /
In order to work-around a performance issue present on the first of
two XFI T-PHYs present in MT7988, special tuning is applied which can be
selected by adding the 'mediatek,usxgmii-performance-errata' property to
the device tree node.
There is no documentation for most registers used for the
analog/tuning part, however, most of the registers have been partially
reverse-engineered from MediaTek's SDK implementation (an opaque
sequence of 32-bit register writes) and descriptions for all relevant
digital registers and bits such as resets and muxes have been supplied
by MediaTek.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
---
MAINTAINERS | 1 +
drivers/phy/mediatek/Kconfig | 12 +
drivers/phy/mediatek/Makefile | 1 +
drivers/phy/mediatek/phy-mtk-xfi-tphy.c | 392 ++++++++++++++++++++++++
4 files changed, 406 insertions(+)
create mode 100644 drivers/phy/mediatek/phy-mtk-xfi-tphy.c
--- a/drivers/phy/mediatek/Kconfig
+++ b/drivers/phy/mediatek/Kconfig
@@ -13,6 +13,18 @@ config PHY_MTK_PCIE
callback for PCIe GEN3 port, it supports software efuse
initialization.
+config PHY_MTK_XFI_TPHY
+ tristate "MediaTek XFI T-PHY Driver"
+ depends on ARCH_MEDIATEK || COMPILE_TEST
+ depends on OF && OF_ADDRESS
+ depends on HAS_IOMEM
+ select GENERIC_PHY
+ help
+ Say 'Y' here to add support for MediaTek XFI T-PHY driver.
+ The driver provides access to the Ethernet SerDes T-PHY supporting
+ 1GE and 2.5GE modes via the LynxI PCS, and 5GE and 10GE modes
+ via the USXGMII PCS found in MediaTek SoCs with 10G Ethernet.
+
config PHY_MTK_TPHY
tristate "MediaTek T-PHY Driver"
depends on ARCH_MEDIATEK || COMPILE_TEST
--- a/drivers/phy/mediatek/Makefile
+++ b/drivers/phy/mediatek/Makefile
@@ -8,6 +8,7 @@ obj-$(CONFIG_PHY_MTK_PCIE) += phy-mtk-p
obj-$(CONFIG_PHY_MTK_TPHY) += phy-mtk-tphy.o
obj-$(CONFIG_PHY_MTK_UFS) += phy-mtk-ufs.o
obj-$(CONFIG_PHY_MTK_XSPHY) += phy-mtk-xsphy.o
+obj-$(CONFIG_PHY_MTK_XFI_TPHY) += phy-mtk-xfi-tphy.o
phy-mtk-hdmi-drv-y := phy-mtk-hdmi.o
phy-mtk-hdmi-drv-y += phy-mtk-hdmi-mt2701.o
--- /dev/null
+++ b/drivers/phy/mediatek/phy-mtk-xfi-tphy.c
@@ -0,0 +1,393 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/* MediaTek 10GE SerDes PHY driver
+ *
+ * Copyright (c) 2024 Daniel Golle <daniel@makrotopia.org>
+ * Bc-bocun Chen <bc-bocun.chen@mediatek.com>
+ * based on mtk_usxgmii.c found in MediaTek's SDK released under GPL-2.0
+ * Copyright (c) 2022 MediaTek Inc.
+ * Author: Henry Yen <henry.yen@mediatek.com>
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/reset.h>
+#include <linux/phy.h>
+#include <linux/phy/phy.h>
+
+#define MTK_XFI_TPHY_NUM_CLOCKS 2
+
+#define REG_DIG_GLB_70 0x0070
+#define XTP_PCS_RX_EQ_IN_PROGRESS(x) FIELD_PREP(GENMASK(25, 24), (x))
+#define XTP_PCS_MODE_MASK GENMASK(17, 16)
+#define XTP_PCS_MODE(x) FIELD_PREP(GENMASK(17, 16), (x))
+#define XTP_PCS_RST_B BIT(15)
+#define XTP_FRC_PCS_RST_B BIT(14)
+#define XTP_PCS_PWD_SYNC_MASK GENMASK(13, 12)
+#define XTP_PCS_PWD_SYNC(x) FIELD_PREP(XTP_PCS_PWD_SYNC_MASK, (x))
+#define XTP_PCS_PWD_ASYNC_MASK GENMASK(11, 10)
+#define XTP_PCS_PWD_ASYNC(x) FIELD_PREP(XTP_PCS_PWD_ASYNC_MASK, (x))
+#define XTP_FRC_PCS_PWD_ASYNC BIT(8)
+#define XTP_PCS_UPDT BIT(4)
+#define XTP_PCS_IN_FR_RG BIT(0)
+
+#define REG_DIG_GLB_F4 0x00f4
+#define XFI_DPHY_PCS_SEL BIT(0)
+#define XFI_DPHY_PCS_SEL_SGMII FIELD_PREP(XFI_DPHY_PCS_SEL, 1)
+#define XFI_DPHY_PCS_SEL_USXGMII FIELD_PREP(XFI_DPHY_PCS_SEL, 0)
+#define XFI_DPHY_AD_SGDT_FRC_EN BIT(5)
+
+#define REG_DIG_LN_TRX_40 0x3040
+#define XTP_LN_FRC_TX_DATA_EN BIT(29)
+#define XTP_LN_TX_DATA_EN BIT(28)
+
+#define REG_DIG_LN_TRX_B0 0x30b0
+#define XTP_LN_FRC_TX_MACCK_EN BIT(5)
+#define XTP_LN_TX_MACCK_EN BIT(4)
+
+#define REG_ANA_GLB_D0 0x90d0
+#define XTP_GLB_USXGMII_SEL_MASK GENMASK(3, 1)
+#define XTP_GLB_USXGMII_SEL(x) FIELD_PREP(GENMASK(3, 1), (x))
+#define XTP_GLB_USXGMII_EN BIT(0)
+
+struct mtk_xfi_tphy {
+ void __iomem *base;
+ struct device *dev;
+ struct reset_control *reset;
+ struct clk_bulk_data clocks[MTK_XFI_TPHY_NUM_CLOCKS];
+ bool da_war;
+};
+
+static void mtk_xfi_tphy_write(struct mtk_xfi_tphy *xfi_tphy, u16 reg,
+ u32 value)
+{
+ iowrite32(value, xfi_tphy->base + reg);
+}
+
+static void mtk_xfi_tphy_rmw(struct mtk_xfi_tphy *xfi_tphy, u16 reg,
+ u32 clr, u32 set)
+{
+ u32 val;
+
+ val = ioread32(xfi_tphy->base + reg);
+ val &= ~clr;
+ val |= set;
+ iowrite32(val, xfi_tphy->base + reg);
+}
+
+static void mtk_xfi_tphy_set(struct mtk_xfi_tphy *xfi_tphy, u16 reg,
+ u32 set)
+{
+ mtk_xfi_tphy_rmw(xfi_tphy, reg, 0, set);
+}
+
+static void mtk_xfi_tphy_clear(struct mtk_xfi_tphy *xfi_tphy, u16 reg,
+ u32 clr)
+{
+ mtk_xfi_tphy_rmw(xfi_tphy, reg, clr, 0);
+}
+
+static void mtk_xfi_tphy_setup(struct mtk_xfi_tphy *xfi_tphy,
+ phy_interface_t interface)
+{
+ bool is_2p5g = (interface == PHY_INTERFACE_MODE_2500BASEX);
+ bool is_1g = (interface == PHY_INTERFACE_MODE_1000BASEX ||
+ interface == PHY_INTERFACE_MODE_SGMII);
+ bool is_10g = (interface == PHY_INTERFACE_MODE_10GBASER ||
+ interface == PHY_INTERFACE_MODE_USXGMII);
+ bool is_5g = (interface == PHY_INTERFACE_MODE_5GBASER);
+ bool is_xgmii = (is_10g || is_5g);
+
+ dev_dbg(xfi_tphy->dev, "setting up for mode %s\n", phy_modes(interface));
+
+ /* Setup PLL setting */
+ mtk_xfi_tphy_rmw(xfi_tphy, 0x9024, 0x100000, is_10g ? 0x0 : 0x100000);
+ mtk_xfi_tphy_rmw(xfi_tphy, 0x2020, 0x202000, is_5g ? 0x202000 : 0x0);
+ mtk_xfi_tphy_rmw(xfi_tphy, 0x2030, 0x500, is_1g ? 0x0 : 0x500);
+ mtk_xfi_tphy_rmw(xfi_tphy, 0x2034, 0xa00, is_1g ? 0x0 : 0xa00);
+ mtk_xfi_tphy_rmw(xfi_tphy, 0x2040, 0x340000, is_1g ? 0x200000 :
+ 0x140000);
+
+ /* Setup RXFE BW setting */
+ mtk_xfi_tphy_rmw(xfi_tphy, 0x50f0, 0xc10, is_1g ? 0x410 :
+ is_5g ? 0x800 : 0x400);
+ mtk_xfi_tphy_rmw(xfi_tphy, 0x50e0, 0x4000, is_5g ? 0x0 : 0x4000);
+
+ /* Setup RX CDR setting */
+ mtk_xfi_tphy_rmw(xfi_tphy, 0x506c, 0x30000, is_5g ? 0x0 : 0x30000);
+ mtk_xfi_tphy_rmw(xfi_tphy, 0x5070, 0x670000, is_5g ? 0x620000 : 0x50000);
+ mtk_xfi_tphy_rmw(xfi_tphy, 0x5074, 0x180000, is_5g ? 0x180000 : 0x0);
+ mtk_xfi_tphy_rmw(xfi_tphy, 0x5078, 0xf000400, is_5g ? 0x8000000 :
+ 0x7000400);
+ mtk_xfi_tphy_rmw(xfi_tphy, 0x507c, 0x5000500, is_5g ? 0x4000400 :
+ 0x1000100);
+ mtk_xfi_tphy_rmw(xfi_tphy, 0x5080, 0x1410, is_1g ? 0x400 :
+ is_5g ? 0x1010 : 0x0);
+ mtk_xfi_tphy_rmw(xfi_tphy, 0x5084, 0x30300, is_1g ? 0x30300 :
+ is_5g ? 0x30100 :
+ 0x100);
+ mtk_xfi_tphy_rmw(xfi_tphy, 0x5088, 0x60200, is_1g ? 0x20200 :
+ is_5g ? 0x40000 :
+ 0x20000);
+
+ /* Setting RXFE adaptation range setting */
+ mtk_xfi_tphy_rmw(xfi_tphy, 0x50e4, 0xc0000, is_5g ? 0x0 : 0xc0000);
+ mtk_xfi_tphy_rmw(xfi_tphy, 0x50e8, 0x40000, is_5g ? 0x0 : 0x40000);
+ mtk_xfi_tphy_rmw(xfi_tphy, 0x50ec, 0xa00, is_1g ? 0x200 : 0x800);
+ mtk_xfi_tphy_rmw(xfi_tphy, 0x50a8, 0xee0000, is_5g ? 0x800000 :
+ 0x6e0000);
+ mtk_xfi_tphy_rmw(xfi_tphy, 0x6004, 0x190000, is_5g ? 0x0 : 0x190000);
+ if (is_10g)
+ mtk_xfi_tphy_write(xfi_tphy, 0x00f8, 0x01423342);
+ else if (is_5g)
+ mtk_xfi_tphy_write(xfi_tphy, 0x00f8, 0x00a132a1);
+ else if (is_2p5g)
+ mtk_xfi_tphy_write(xfi_tphy, 0x00f8, 0x009c329c);
+ else
+ mtk_xfi_tphy_write(xfi_tphy, 0x00f8, 0x00fa32fa);
+
+ /* Force SGDT_OUT off and select PCS */
+ mtk_xfi_tphy_rmw(xfi_tphy, REG_DIG_GLB_F4,
+ XFI_DPHY_AD_SGDT_FRC_EN | XFI_DPHY_PCS_SEL,
+ XFI_DPHY_AD_SGDT_FRC_EN |
+ (is_xgmii ? XFI_DPHY_PCS_SEL_USXGMII :
+ XFI_DPHY_PCS_SEL_SGMII));
+
+
+ /* Force GLB_CKDET_OUT */
+ mtk_xfi_tphy_set(xfi_tphy, 0x0030, 0xc00);
+
+ /* Force AEQ on */
+ mtk_xfi_tphy_write(xfi_tphy, REG_DIG_GLB_70,
+ XTP_PCS_RX_EQ_IN_PROGRESS(2) |
+ XTP_PCS_PWD_SYNC(2) |
+ XTP_PCS_PWD_ASYNC(2));
+
+ usleep_range(1, 5);
+ writel(XTP_LN_FRC_TX_DATA_EN, xfi_tphy->base + REG_DIG_LN_TRX_40);
+
+ /* Setup TX DA default value */
+ mtk_xfi_tphy_rmw(xfi_tphy, 0x30b0, 0x30, 0x20);
+ mtk_xfi_tphy_write(xfi_tphy, 0x3028, 0x00008a01);
+ mtk_xfi_tphy_write(xfi_tphy, 0x302c, 0x0000a884);
+ mtk_xfi_tphy_write(xfi_tphy, 0x3024, 0x00083002);
+
+ /* Setup RG default value */
+ if (is_xgmii) {
+ mtk_xfi_tphy_write(xfi_tphy, 0x3010, 0x00022220);
+ mtk_xfi_tphy_write(xfi_tphy, 0x5064, 0x0f020a01);
+ mtk_xfi_tphy_write(xfi_tphy, 0x50b4, 0x06100600);
+ if (interface == PHY_INTERFACE_MODE_USXGMII)
+ mtk_xfi_tphy_write(xfi_tphy, 0x3048, 0x40704000);
+ else
+ mtk_xfi_tphy_write(xfi_tphy, 0x3048, 0x47684100);
+ } else {
+ mtk_xfi_tphy_write(xfi_tphy, 0x3010, 0x00011110);
+ mtk_xfi_tphy_write(xfi_tphy, 0x3048, 0x40704000);
+ }
+
+ if (is_1g)
+ mtk_xfi_tphy_write(xfi_tphy, 0x3064, 0x0000c000);
+
+ /* Setup RX EQ initial value */
+ mtk_xfi_tphy_rmw(xfi_tphy, 0x3050, 0xa8000000,
+ (interface != PHY_INTERFACE_MODE_10GBASER) ?
+ 0xa8000000 : 0x0);
+ mtk_xfi_tphy_rmw(xfi_tphy, 0x3054, 0xaa,
+ (interface != PHY_INTERFACE_MODE_10GBASER) ?
+ 0xaa : 0x0);
+
+ if (is_xgmii)
+ mtk_xfi_tphy_write(xfi_tphy, 0x306c, 0x00000f00);
+ else if (is_2p5g)
+ mtk_xfi_tphy_write(xfi_tphy, 0x306c, 0x22000f00);
+ else
+ mtk_xfi_tphy_write(xfi_tphy, 0x306c, 0x20200f00);
+
+ if (interface == PHY_INTERFACE_MODE_10GBASER && xfi_tphy->da_war)
+ mtk_xfi_tphy_rmw(xfi_tphy, 0xa008, 0x10000, 0x10000);
+
+ mtk_xfi_tphy_rmw(xfi_tphy, 0xa060, 0x50000, is_xgmii ? 0x40000 :
+ 0x50000);
+
+ /* Setup PHYA speed */
+ mtk_xfi_tphy_rmw(xfi_tphy, REG_ANA_GLB_D0,
+ XTP_GLB_USXGMII_SEL_MASK | XTP_GLB_USXGMII_EN,
+ is_10g ? XTP_GLB_USXGMII_SEL(0) :
+ is_5g ? XTP_GLB_USXGMII_SEL(1) :
+ is_2p5g ? XTP_GLB_USXGMII_SEL(2) :
+ XTP_GLB_USXGMII_SEL(3));
+ mtk_xfi_tphy_set(xfi_tphy, REG_ANA_GLB_D0, XTP_GLB_USXGMII_EN);
+
+ /* Release reset */
+ mtk_xfi_tphy_set(xfi_tphy, REG_DIG_GLB_70,
+ XTP_PCS_RST_B | XTP_FRC_PCS_RST_B);
+ usleep_range(150, 500);
+
+ /* Switch to P0 */
+ mtk_xfi_tphy_rmw(xfi_tphy, REG_DIG_GLB_70,
+ XTP_PCS_PWD_SYNC_MASK |
+ XTP_PCS_PWD_ASYNC_MASK,
+ XTP_FRC_PCS_PWD_ASYNC |
+ XTP_PCS_UPDT | XTP_PCS_IN_FR_RG);
+ usleep_range(1, 5);
+
+ mtk_xfi_tphy_clear(xfi_tphy, REG_DIG_GLB_70, XTP_PCS_UPDT);
+ usleep_range(15, 50);
+
+ if (is_xgmii) {
+ /* Switch to Gen3 */
+ mtk_xfi_tphy_rmw(xfi_tphy, REG_DIG_GLB_70,
+ XTP_PCS_MODE_MASK | XTP_PCS_UPDT,
+ XTP_PCS_MODE(2) | XTP_PCS_UPDT);
+ } else {
+ /* Switch to Gen2 */
+ mtk_xfi_tphy_rmw(xfi_tphy, REG_DIG_GLB_70,
+ XTP_PCS_MODE_MASK | XTP_PCS_UPDT,
+ XTP_PCS_MODE(1) | XTP_PCS_UPDT);
+ }
+ usleep_range(1, 5);
+
+ mtk_xfi_tphy_clear(xfi_tphy, REG_DIG_GLB_70, XTP_PCS_UPDT);
+
+ usleep_range(100, 500);
+
+ /* Enable MAC CK */
+ mtk_xfi_tphy_set(xfi_tphy, REG_DIG_LN_TRX_B0, XTP_LN_TX_MACCK_EN);
+ mtk_xfi_tphy_clear(xfi_tphy, REG_DIG_GLB_F4, XFI_DPHY_AD_SGDT_FRC_EN);
+
+ /* Enable TX data */
+ mtk_xfi_tphy_set(xfi_tphy, REG_DIG_LN_TRX_40,
+ XTP_LN_FRC_TX_DATA_EN | XTP_LN_TX_DATA_EN);
+ usleep_range(400, 1000);
+}
+
+static int mtk_xfi_tphy_set_mode(struct phy *phy, enum phy_mode mode, int
+ submode)
+{
+ struct mtk_xfi_tphy *xfi_tphy = phy_get_drvdata(phy);
+
+ if (mode != PHY_MODE_ETHERNET)
+ return -EINVAL;
+
+ switch (submode) {
+ case PHY_INTERFACE_MODE_1000BASEX:
+ case PHY_INTERFACE_MODE_2500BASEX:
+ case PHY_INTERFACE_MODE_SGMII:
+ case PHY_INTERFACE_MODE_5GBASER:
+ case PHY_INTERFACE_MODE_10GBASER:
+ case PHY_INTERFACE_MODE_USXGMII:
+ mtk_xfi_tphy_setup(xfi_tphy, submode);
+ return 0;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int mtk_xfi_tphy_reset(struct phy *phy)
+{
+ struct mtk_xfi_tphy *xfi_tphy = phy_get_drvdata(phy);
+
+ reset_control_assert(xfi_tphy->reset);
+ usleep_range(100, 500);
+ reset_control_deassert(xfi_tphy->reset);
+ usleep_range(1, 10);
+
+ return 0;
+}
+
+static int mtk_xfi_tphy_power_on(struct phy *phy)
+{
+ struct mtk_xfi_tphy *xfi_tphy = phy_get_drvdata(phy);
+
+ return clk_bulk_prepare_enable(MTK_XFI_TPHY_NUM_CLOCKS, xfi_tphy->clocks);
+}
+
+static int mtk_xfi_tphy_power_off(struct phy *phy)
+{
+ struct mtk_xfi_tphy *xfi_tphy = phy_get_drvdata(phy);
+
+ clk_bulk_disable_unprepare(MTK_XFI_TPHY_NUM_CLOCKS, xfi_tphy->clocks);
+
+ return 0;
+}
+
+static const struct phy_ops mtk_xfi_tphy_ops = {
+ .power_on = mtk_xfi_tphy_power_on,
+ .power_off = mtk_xfi_tphy_power_off,
+ .set_mode = mtk_xfi_tphy_set_mode,
+ .reset = mtk_xfi_tphy_reset,
+ .owner = THIS_MODULE,
+};
+
+static int mtk_xfi_tphy_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct phy_provider *phy_provider;
+ struct mtk_xfi_tphy *xfi_tphy;
+ struct phy *phy;
+
+ if (!np)
+ return -ENODEV;
+
+ xfi_tphy = devm_kzalloc(&pdev->dev, sizeof(*xfi_tphy), GFP_KERNEL);
+ if (!xfi_tphy)
+ return -ENOMEM;
+
+ xfi_tphy->base = devm_of_iomap(&pdev->dev, np, 0, NULL);
+ if (!xfi_tphy->base)
+ return -EIO;
+
+ xfi_tphy->dev = &pdev->dev;
+
+ xfi_tphy->clocks[0].id = "topxtal";
+ xfi_tphy->clocks[0].clk = devm_clk_get(&pdev->dev, xfi_tphy->clocks[0].id);
+ if (IS_ERR(xfi_tphy->clocks[0].clk))
+ return PTR_ERR(xfi_tphy->clocks[0].clk);
+
+ xfi_tphy->clocks[1].id = "xfipll";
+ xfi_tphy->clocks[1].clk = devm_clk_get(&pdev->dev, xfi_tphy->clocks[1].id);
+ if (IS_ERR(xfi_tphy->clocks[1].clk))
+ return PTR_ERR(xfi_tphy->clocks[1].clk);
+
+ xfi_tphy->reset = devm_reset_control_get_exclusive(&pdev->dev, NULL);
+ if (IS_ERR(xfi_tphy->reset))
+ return PTR_ERR(xfi_tphy->reset);
+
+ xfi_tphy->da_war = of_property_read_bool(np,
+ "mediatek,usxgmii-performance-errata");
+
+ phy = devm_phy_create(&pdev->dev, NULL, &mtk_xfi_tphy_ops);
+ if (IS_ERR(phy))
+ return PTR_ERR(phy);
+
+ phy_set_drvdata(phy, xfi_tphy);
+
+ phy_provider = devm_of_phy_provider_register(&pdev->dev,
+ of_phy_simple_xlate);
+
+ return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id mtk_xfi_tphy_match[] = {
+ { .compatible = "mediatek,mt7988-xfi-tphy", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, mtk_xfi_tphy_match);
+
+static struct platform_driver mtk_xfi_tphy_driver = {
+ .probe = mtk_xfi_tphy_probe,
+ .driver = {
+ .name = "mtk-xfi-tphy",
+ .of_match_table = mtk_xfi_tphy_match,
+ },
+};
+module_platform_driver(mtk_xfi_tphy_driver);
+
+MODULE_DESCRIPTION("MediaTek XFI T-PHY driver");
+MODULE_AUTHOR("Daniel Golle <daniel@makrotopia.org>");
+MODULE_AUTHOR("Bc-bocun Chen <bc-bocun.chen@mediatek.com>");
+MODULE_LICENSE("GPL");