openwrt/target/linux/ath79/dts/qca955x_senao_router-dual.dtsi

127 lines
1.9 KiB
Plaintext
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qca955x.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
keys {
compatible = "gpio-keys";
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
wps {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
};
&eth0 {
status = "okay";
phy-handle = <&phy0>;
pll-data = <0xa6000000 0x00000101 0x00001616>;
};
&mdio0 {
status = "okay";
phy0: ethernet-phy@0 {
reg = <0>;
};
};
&pcie0 {
status = "okay";
ath10k_0: wifi@0,0 {
compatible = "qcom,ath10k";
reg = <0x0000 0 0 0 0>;
};
};
&spi {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <40000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x000000 0x030000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x030000 0x010000>;
read-only;
};
partition@40000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x040000 0xe50000>;
};
partition@e90000 {
label = "manufacture";
reg = <0xe90000 0x100000>;
read-only;
};
partition@f90000 {
label = "backup";
reg = <0xf90000 0x010000>;
read-only;
};
partition@fa0000 {
label = "storage";
reg = <0xfa0000 0x050000>;
read-only;
};
partition@ff0000 {
label = "art";
reg = <0xff0000 0x010000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
calibration_art_1000: calibration@1000 {
reg = <0x1000 0x440>;
};
calibration_art_5000: calibration@5000 {
reg = <0x5000 0x844>;
};
};
};
};
};
};
&wmac {
status = "okay";
};