2016-04-01 07:11:48 +00:00
|
|
|
#
|
|
|
|
# MT7621 Profiles
|
|
|
|
#
|
|
|
|
|
2020-01-29 17:21:53 +00:00
|
|
|
include ./common-tp-link.mk
|
|
|
|
|
2020-01-21 20:54:50 +00:00
|
|
|
DEFAULT_SOC := mt7621
|
|
|
|
|
2018-08-30 08:51:09 +00:00
|
|
|
KERNEL_DTB += -d21
|
2020-03-10 06:41:09 +00:00
|
|
|
DEVICE_VARS += UIMAGE_MAGIC SERCOMM_HWNAME
|
2019-09-24 18:02:04 +00:00
|
|
|
|
|
|
|
# The OEM webinterface expects an kernel with initramfs which has the uImage
|
|
|
|
# header field ih_name.
|
|
|
|
# We don't want to set the header name field for the kernel include in the
|
|
|
|
# sysupgrade image as well, as this image shouldn't be accepted by the OEM
|
|
|
|
# webinterface. It will soft-brick the board.
|
|
|
|
define Build/custom-initramfs-uimage
|
|
|
|
mkimage -A $(LINUX_KARCH) \
|
|
|
|
-O linux -T kernel \
|
|
|
|
-C lzma -a $(KERNEL_LOADADDR) $(if $(UIMAGE_MAGIC),-M $(UIMAGE_MAGIC),) \
|
|
|
|
-e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
|
|
|
|
-n '$(1)' -d $@ $@.new
|
|
|
|
mv $@.new $@
|
|
|
|
endef
|
2017-07-23 19:06:44 +00:00
|
|
|
|
2018-07-26 14:24:22 +00:00
|
|
|
define Build/elecom-gst-factory
|
|
|
|
$(eval product=$(word 1,$(1)))
|
|
|
|
$(eval version=$(word 2,$(1)))
|
|
|
|
( $(STAGING_DIR_HOST)/bin/mkhash md5 $@ | tr -d '\n' ) >> $@
|
|
|
|
( \
|
|
|
|
echo -n "ELECOM $(product) v$(version)" | \
|
|
|
|
dd bs=32 count=1 conv=sync; \
|
|
|
|
dd if=$@; \
|
|
|
|
) > $@.new
|
|
|
|
mv $@.new $@
|
|
|
|
echo -n "MT7621_ELECOM_$(product)" >> $@
|
|
|
|
endef
|
|
|
|
|
2018-06-15 15:27:51 +00:00
|
|
|
define Build/elecom-wrc-factory
|
|
|
|
$(eval product=$(word 1,$(1)))
|
|
|
|
$(eval version=$(word 2,$(1)))
|
|
|
|
$(STAGING_DIR_HOST)/bin/mkhash md5 $@ >> $@
|
|
|
|
( \
|
|
|
|
echo -n "ELECOM $(product) v$(version)" | \
|
|
|
|
dd bs=32 count=1 conv=sync; \
|
|
|
|
dd if=$@; \
|
|
|
|
) > $@.new
|
|
|
|
mv $@.new $@
|
|
|
|
endef
|
|
|
|
|
ramips: add support for I-O DATA WN-AX1167GR
I-O DATA WN-AX1167GR is a 2.4/5 GHz band 11ac router, based on
MediaTek MT7621A.
Specification:
- MT7621A (2-Cores, 4-Threads)
- 64 MB of RAM (DDR2)
- 16 MB of Flash (SPI)
- 2T2R 2.4/5 GHz
- 5x 10/100/1000 Mbps Ethernet
- 2x LEDs, 4x keys (2x buttons, 1x slide switch)
- UART header on PCB
- Vcc, GND, TX, RX from ethernet port side
- baudrate: 115200 bps (U-Boot, OpenWrt)
Stock firmware:
In the stock firmware, WN-AX1167GR has two os images each composed of
Linux kernel and rootfs.
These images are stored in "Kernel" and "app" partition of the
following partitions, respectively.
(excerpt from dmesg):
MX25L12805D(c2 2018c220) (16384 Kbytes)
mtd .name = raspi, .size = 0x01000000 (16M) .erasesize = 0x00010000 (64K) .numeraseregions = 0
Creating 10 MTD partitions on "raspi":
0x000000000000-0x000001000000 : "ALL"
0x000000000000-0x000000030000 : "Bootloader"
0x000000030000-0x000000040000 : "Config "
0x000000040000-0x000000050000 : "Factory"
0x000000050000-0x000000060000 : "iNIC_rf"
0x000000060000-0x0000007e0000 : "Kernel"
0x000000800000-0x000000f80000 : "app"
0x000000f90000-0x000000fa0000 : "Key"
0x000000fa0000-0x000000fb0000 : "backup"
0x000000fb0000-0x000001000000 : "storage"
The flag for boot partition is stored in "Key" partition, and U-Boot
reads this and determines the partition to boot.
If the image that U-Boot first reads according to the flag is
"Bad Magic Number", U-Boot then tries to boot from the other image.
If the second image is correct, change the flag to the number
corresponding to that image and boot from that image.
(example):
## Booting image at bc800000 ...
Bad Magic Number,FFFFFFFF
Boot from KERNEL 1 !!
## Booting image at bc060000 ...
Image Name: MIPS OpenWrt Linux-4.14.50
Image Type: MIPS Linux kernel Image (lzma compressed)
Data Size: 1865917 Bytes = 1.8 MB
Load Address: 80001000
Entry Point: 80001000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
raspi_erase_write: offs:f90000, count:34
.
.
Done!
Starting kernel ...
Flash instruction using factory image:
1. Connect the computer to the LAN port of WN-AX1167GR
2. Connect power cable to WN-AX1167GR and turn on it
3. Access to "192.168.0.1" on the web browser and open firmware
update page ("ファームウェア")
4. Select the OpenWrt factory image and perform firmware update
5. On the initramfs image, execute "mtd erase firmware" to erase stock
firmware and execute sysupgrade with sysupgrade image for WN-AX1167GR
6. Wait ~180 seconds to complete flasing
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
2018-06-27 13:47:13 +00:00
|
|
|
define Build/iodata-factory
|
|
|
|
$(eval fw_size=$(word 1,$(1)))
|
|
|
|
$(eval fw_type=$(word 2,$(1)))
|
|
|
|
$(eval product=$(word 3,$(1)))
|
|
|
|
$(eval factory_bin=$(word 4,$(1)))
|
|
|
|
if [ -e $(KDIR)/tmp/$(KERNEL_INITRAMFS_IMAGE) -a "$$(stat -c%s $@)" -lt "$(fw_size)" ]; then \
|
|
|
|
$(CP) $(KDIR)/tmp/$(KERNEL_INITRAMFS_IMAGE) $(factory_bin); \
|
|
|
|
$(STAGING_DIR_HOST)/bin/mksenaofw \
|
|
|
|
-r 0x30a -p $(product) -t $(fw_type) \
|
|
|
|
-e $(factory_bin) -o $(factory_bin).new; \
|
|
|
|
mv $(factory_bin).new $(factory_bin); \
|
|
|
|
$(CP) $(factory_bin) $(BIN_DIR)/; \
|
|
|
|
else \
|
|
|
|
echo "WARNING: initramfs kernel image too big, cannot generate factory image" >&2; \
|
|
|
|
fi
|
|
|
|
endef
|
|
|
|
|
2019-04-09 05:48:31 +00:00
|
|
|
define Build/iodata-mstc-header
|
|
|
|
( \
|
|
|
|
data_size_crc="$$(dd if=$@ ibs=64 skip=1 2>/dev/null | \
|
|
|
|
gzip -c | tail -c 8 | od -An -tx8 --endian little | tr -d ' \n')"; \
|
|
|
|
echo -ne "$$(echo $$data_size_crc | sed 's/../\\x&/g')" | \
|
|
|
|
dd of=$@ bs=8 count=1 seek=7 conv=notrunc 2>/dev/null; \
|
|
|
|
)
|
|
|
|
dd if=/dev/zero of=$@ bs=4 count=1 seek=1 conv=notrunc 2>/dev/null
|
|
|
|
( \
|
|
|
|
header_crc="$$(dd if=$@ bs=64 count=1 2>/dev/null | \
|
|
|
|
gzip -c | tail -c 8 | od -An -N4 -tx4 --endian little | tr -d ' \n')"; \
|
|
|
|
echo -ne "$$(echo $$header_crc | sed 's/../\\x&/g')" | \
|
|
|
|
dd of=$@ bs=4 count=1 seek=1 conv=notrunc 2>/dev/null; \
|
|
|
|
)
|
|
|
|
endef
|
|
|
|
|
2020-02-07 11:26:05 +00:00
|
|
|
define Build/netis-tail
|
|
|
|
echo -n $(1) >> $@
|
|
|
|
echo -n $(UIMAGE_NAME)-yun | $(STAGING_DIR_HOST)/bin/mkhash md5 | \
|
|
|
|
sed 's/../\\\\x&/g' | xargs echo -ne >> $@
|
|
|
|
endef
|
|
|
|
|
2016-04-09 10:24:29 +00:00
|
|
|
define Build/ubnt-erx-factory-image
|
2016-07-06 08:11:29 +00:00
|
|
|
if [ -e $(KDIR)/tmp/$(KERNEL_INITRAMFS_IMAGE) -a "$$(stat -c%s $@)" -lt "$(KERNEL_SIZE)" ]; then \
|
2016-04-09 10:24:29 +00:00
|
|
|
echo '21001:6' > $(1).compat; \
|
|
|
|
$(TAR) -cf $(1) --transform='s/^.*/compat/' $(1).compat; \
|
|
|
|
\
|
|
|
|
$(TAR) -rf $(1) --transform='s/^.*/vmlinux.tmp/' $(KDIR)/tmp/$(KERNEL_INITRAMFS_IMAGE); \
|
2016-12-25 15:40:05 +00:00
|
|
|
mkhash md5 $(KDIR)/tmp/$(KERNEL_INITRAMFS_IMAGE) > $(1).md5; \
|
2016-04-09 10:24:29 +00:00
|
|
|
$(TAR) -rf $(1) --transform='s/^.*/vmlinux.tmp.md5/' $(1).md5; \
|
|
|
|
\
|
|
|
|
echo "dummy" > $(1).rootfs; \
|
|
|
|
$(TAR) -rf $(1) --transform='s/^.*/squashfs.tmp/' $(1).rootfs; \
|
2016-04-01 07:11:48 +00:00
|
|
|
\
|
2016-12-25 15:40:05 +00:00
|
|
|
mkhash md5 $(1).rootfs > $(1).md5; \
|
2016-04-09 10:24:29 +00:00
|
|
|
$(TAR) -rf $(1) --transform='s/^.*/squashfs.tmp.md5/' $(1).md5; \
|
|
|
|
\
|
|
|
|
echo '$(BOARD) $(VERSION_CODE) $(VERSION_NUMBER)' > $(1).version; \
|
|
|
|
$(TAR) -rf $(1) --transform='s/^.*/version.tmp/' $(1).version; \
|
|
|
|
\
|
|
|
|
$(CP) $(1) $(BIN_DIR)/; \
|
2016-07-06 08:11:29 +00:00
|
|
|
else \
|
|
|
|
echo "WARNING: initramfs kernel image too big, cannot generate factory image" >&2; \
|
2016-04-01 07:11:48 +00:00
|
|
|
fi
|
|
|
|
endef
|
|
|
|
|
2019-07-07 14:27:51 +00:00
|
|
|
define Device/afoundry_ew1200
|
2019-07-22 16:09:57 +00:00
|
|
|
IMAGE_SIZE := 16064k
|
2019-07-07 14:27:51 +00:00
|
|
|
DEVICE_VENDOR := AFOUNDRY
|
|
|
|
DEVICE_MODEL := EW1200
|
2020-03-05 13:57:29 +00:00
|
|
|
DEVICE_PACKAGES := kmod-ata-ahci kmod-mt76x2 kmod-mt7603 kmod-usb3 \
|
|
|
|
kmod-usb-ledtrig-usbport wpad-basic
|
2019-07-07 14:27:51 +00:00
|
|
|
SUPPORTED_DEVICES += ew1200
|
2016-04-01 07:11:48 +00:00
|
|
|
endef
|
2019-07-07 14:27:51 +00:00
|
|
|
TARGET_DEVICES += afoundry_ew1200
|
|
|
|
|
ramips: add support for ALFA Network Quad-E4G
ALFA Network Quad-E4G is a universal Wi-Fi/4G platform, which offers
three miniPCIe (PCIe, USB 2.0, SIM) and a single M.2 B-key (dual-SIM,
USB 3.0) slots, RTC and five Gigabit Ethernet ports with PoE support.
Specification:
- MT7621A (880 MHz)
- 256/512 MB of RAM (DDR3)
- 16/32+ MB of FLASH (SPI NOR)
- optional second SPI flash (8-pin WSON/SOIC)
- 1x microSD (SDXC) flash card reader
- 5x 10/100/100 Mbps Ethernet, with passive PoE support (24 V) in LAN1
- optional 802.3at/af PoE module for WAN
- 3x miniPCIe slot (with PCIe and USB 2.0 buses, micro SIM and 5 V)
- 1x M.2/NGFF B-key 3042 (USB 3.0/2.0, mini + micro SIM)
- RTC (TI BQ32002, I2C bus) with backup battery (CR2032)
- external hardware watchdog (EM Microelectronic EM6324)
- 1x USB 2.0 Type-A
- 1x micro USB Type-B for system serial console (Holtek HT42B534)
- 11x LED (5 for Ethernet, 5 driven by GPIO, 1x power indicator)
- 3x button (reset, user1, user2)
- 1x I2C (4-pin, 2.54 mm pitch) header on PCB
- 4x SIM (6-pin, 2.00 mm pitch) headers on PCB
- 2x UART2/3 (4-pin, 2.54 mm pitch) headers on PCB
- 1x mechanical power switch
- 1x DC jack with lock (24 V)
Other:
- U-Boot selects default SIM slot, based on value of 'default_sim' env
variable: '1' or unset -> SIM1 (mini), '2' -> SIM2 (micro). This board
has additional logic circuit for M.2 SIM switching. The 'sim-select'
will work only if both SIM slots are occupied. Otherwise, always slot
with SIM inside is selected, no matter 'sim-select' value.
- U-Boot enables power in all three miniPCIe and M.2 slots before
loading the kernel
- this board supports 'dual image' feature (controlled by 'dual_image'
U-Boot environment variable)
- all three miniPCIe slots have additional 5 V supply on pins 47 and 49
- the board allows to install up to two oversized miniPCIe cards (vendor
has dedicated MediaTek MT7615N/D cards for this board)
- this board has additional logic circuit controlling PERSTn pins inside
miniPCIe slots. By default, PERSTn (GPIO19) is routed to all miniPCIe
slots but setting GPIO22 to high allows PERSTn control per slot, using
GPIO23-25 (value is inverted)
You can use the 'sysupgrade' image directly in vendor firmware which is
based on OpenWrt (make sure to not preserve settings - use 'sysupgrade
-n -F ...' command). Alternatively, use web recovery mode in U-Boot:
1. Power the device with reset button pressed, the modem LED will start
blinking slowly and after ~3 seconds, when it starts blinking faster,
you can release the button.
2. Setup static IP 192.168.1.2/24 on your PC.
3. Go to 192.168.1.1 in browser and upload 'sysupgrade' image.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2019-11-03 11:12:44 +00:00
|
|
|
define Device/alfa-network_quad-e4g
|
|
|
|
IMAGE_SIZE := 16064k
|
|
|
|
DEVICE_VENDOR := ALFA Network
|
|
|
|
DEVICE_MODEL := Quad-E4G
|
2020-03-05 13:57:29 +00:00
|
|
|
DEVICE_PACKAGES := kmod-ata-ahci kmod-sdhci-mt7620 kmod-usb3 uboot-envtools
|
ramips: add support for ALFA Network Quad-E4G
ALFA Network Quad-E4G is a universal Wi-Fi/4G platform, which offers
three miniPCIe (PCIe, USB 2.0, SIM) and a single M.2 B-key (dual-SIM,
USB 3.0) slots, RTC and five Gigabit Ethernet ports with PoE support.
Specification:
- MT7621A (880 MHz)
- 256/512 MB of RAM (DDR3)
- 16/32+ MB of FLASH (SPI NOR)
- optional second SPI flash (8-pin WSON/SOIC)
- 1x microSD (SDXC) flash card reader
- 5x 10/100/100 Mbps Ethernet, with passive PoE support (24 V) in LAN1
- optional 802.3at/af PoE module for WAN
- 3x miniPCIe slot (with PCIe and USB 2.0 buses, micro SIM and 5 V)
- 1x M.2/NGFF B-key 3042 (USB 3.0/2.0, mini + micro SIM)
- RTC (TI BQ32002, I2C bus) with backup battery (CR2032)
- external hardware watchdog (EM Microelectronic EM6324)
- 1x USB 2.0 Type-A
- 1x micro USB Type-B for system serial console (Holtek HT42B534)
- 11x LED (5 for Ethernet, 5 driven by GPIO, 1x power indicator)
- 3x button (reset, user1, user2)
- 1x I2C (4-pin, 2.54 mm pitch) header on PCB
- 4x SIM (6-pin, 2.00 mm pitch) headers on PCB
- 2x UART2/3 (4-pin, 2.54 mm pitch) headers on PCB
- 1x mechanical power switch
- 1x DC jack with lock (24 V)
Other:
- U-Boot selects default SIM slot, based on value of 'default_sim' env
variable: '1' or unset -> SIM1 (mini), '2' -> SIM2 (micro). This board
has additional logic circuit for M.2 SIM switching. The 'sim-select'
will work only if both SIM slots are occupied. Otherwise, always slot
with SIM inside is selected, no matter 'sim-select' value.
- U-Boot enables power in all three miniPCIe and M.2 slots before
loading the kernel
- this board supports 'dual image' feature (controlled by 'dual_image'
U-Boot environment variable)
- all three miniPCIe slots have additional 5 V supply on pins 47 and 49
- the board allows to install up to two oversized miniPCIe cards (vendor
has dedicated MediaTek MT7615N/D cards for this board)
- this board has additional logic circuit controlling PERSTn pins inside
miniPCIe slots. By default, PERSTn (GPIO19) is routed to all miniPCIe
slots but setting GPIO22 to high allows PERSTn control per slot, using
GPIO23-25 (value is inverted)
You can use the 'sysupgrade' image directly in vendor firmware which is
based on OpenWrt (make sure to not preserve settings - use 'sysupgrade
-n -F ...' command). Alternatively, use web recovery mode in U-Boot:
1. Power the device with reset button pressed, the modem LED will start
blinking slowly and after ~3 seconds, when it starts blinking faster,
you can release the button.
2. Setup static IP 192.168.1.2/24 on your PC.
3. Go to 192.168.1.1 in browser and upload 'sysupgrade' image.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2019-11-03 11:12:44 +00:00
|
|
|
endef
|
|
|
|
TARGET_DEVICES += alfa-network_quad-e4g
|
|
|
|
|
2019-07-07 14:27:51 +00:00
|
|
|
define Device/asiarf_ap7621-001
|
2019-07-15 12:55:24 +00:00
|
|
|
IMAGE_SIZE := 16000k
|
2019-07-07 14:27:51 +00:00
|
|
|
DEVICE_VENDOR := AsiaRF
|
|
|
|
DEVICE_MODEL := AP7621-001
|
2019-12-19 18:40:33 +00:00
|
|
|
DEVICE_PACKAGES := kmod-sdhci-mt7620 kmod-mt76x2 kmod-usb3
|
2019-07-07 14:27:51 +00:00
|
|
|
endef
|
|
|
|
TARGET_DEVICES += asiarf_ap7621-001
|
|
|
|
|
2019-07-22 10:54:06 +00:00
|
|
|
define Device/asiarf_ap7621-nv1
|
|
|
|
IMAGE_SIZE := 16000k
|
|
|
|
DEVICE_VENDOR := AsiaRF
|
|
|
|
DEVICE_MODEL := AP7621-NV1
|
2019-12-19 18:40:33 +00:00
|
|
|
DEVICE_PACKAGES := kmod-sdhci-mt7620 kmod-mt76x2 kmod-usb3
|
2019-07-22 10:54:06 +00:00
|
|
|
endef
|
|
|
|
TARGET_DEVICES += asiarf_ap7621-nv1
|
|
|
|
|
2019-07-11 15:15:48 +00:00
|
|
|
define Device/asus_rt-ac57u
|
|
|
|
DEVICE_VENDOR := ASUS
|
|
|
|
DEVICE_MODEL := RT-AC57U
|
|
|
|
IMAGE_SIZE := 16064k
|
2019-12-19 18:40:33 +00:00
|
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 \
|
|
|
|
kmod-usb-ledtrig-usbport wpad-basic
|
2019-07-11 15:15:48 +00:00
|
|
|
endef
|
|
|
|
TARGET_DEVICES += asus_rt-ac57u
|
|
|
|
|
2019-10-22 19:44:09 +00:00
|
|
|
define Device/asus_rt-ac65p
|
|
|
|
DEVICE_VENDOR := ASUS
|
|
|
|
DEVICE_MODEL := RT-AC65P
|
|
|
|
IMAGE_SIZE := 51200k
|
|
|
|
UBINIZE_OPTS := -E 5
|
|
|
|
BLOCKSIZE := 128k
|
|
|
|
PAGESIZE := 2048
|
|
|
|
KERNEL_SIZE := 4096k
|
|
|
|
IMAGES += factory.bin
|
|
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
2019-12-19 18:40:33 +00:00
|
|
|
IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \
|
2020-03-10 13:58:27 +00:00
|
|
|
check-size
|
2019-10-22 19:44:09 +00:00
|
|
|
DEVICE_PACKAGES := kmod-usb3 kmod-mt7615e wpad-basic uboot-envtools
|
|
|
|
endef
|
|
|
|
TARGET_DEVICES += asus_rt-ac65p
|
|
|
|
|
2019-09-15 14:20:11 +00:00
|
|
|
define Device/asus_rt-ac85p
|
|
|
|
DEVICE_VENDOR := ASUS
|
|
|
|
DEVICE_MODEL := RT-AC85P
|
|
|
|
IMAGE_SIZE := 51200k
|
|
|
|
UBINIZE_OPTS := -E 5
|
|
|
|
BLOCKSIZE := 128k
|
|
|
|
PAGESIZE := 2048
|
|
|
|
KERNEL_SIZE := 4096k
|
|
|
|
IMAGES += factory.bin
|
|
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
2019-12-19 18:40:33 +00:00
|
|
|
IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \
|
2020-03-10 13:58:27 +00:00
|
|
|
check-size
|
2019-09-15 14:20:11 +00:00
|
|
|
DEVICE_PACKAGES := kmod-usb3 kmod-mt7615e wpad-basic uboot-envtools
|
|
|
|
endef
|
|
|
|
TARGET_DEVICES += asus_rt-ac85p
|
|
|
|
|
2019-07-07 14:27:51 +00:00
|
|
|
define Device/buffalo_wsr-1166dhp
|
2020-04-24 05:51:53 +00:00
|
|
|
$(Device/uimage-lzma-loader)
|
2019-07-07 14:27:51 +00:00
|
|
|
IMAGE/sysupgrade.bin := trx | pad-rootfs | append-metadata
|
2019-07-15 12:55:24 +00:00
|
|
|
IMAGE_SIZE := 15936k
|
2019-07-07 14:27:51 +00:00
|
|
|
DEVICE_VENDOR := Buffalo
|
|
|
|
DEVICE_MODEL := WSR-1166DHP
|
|
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 wpad-basic
|
|
|
|
SUPPORTED_DEVICES += wsr-1166
|
|
|
|
endef
|
|
|
|
TARGET_DEVICES += buffalo_wsr-1166dhp
|
|
|
|
|
2019-03-23 13:45:42 +00:00
|
|
|
define Device/buffalo_wsr-2533dhpl
|
2020-04-24 05:51:53 +00:00
|
|
|
$(Device/uimage-lzma-loader)
|
2019-03-23 13:45:42 +00:00
|
|
|
IMAGE_SIZE := 7936k
|
|
|
|
DEVICE_VENDOR := Buffalo
|
|
|
|
DEVICE_MODEL := WSR-2533DHPL
|
|
|
|
IMAGE/sysupgrade.bin := trx | pad-rootfs | append-metadata
|
|
|
|
DEVICE_PACKAGES := kmod-mt7615e wpad-basic
|
|
|
|
endef
|
|
|
|
TARGET_DEVICES += buffalo_wsr-2533dhpl
|
|
|
|
|
2019-07-07 14:27:51 +00:00
|
|
|
define Device/buffalo_wsr-600dhp
|
2019-07-22 16:09:57 +00:00
|
|
|
IMAGE_SIZE := 16064k
|
2019-07-07 14:27:51 +00:00
|
|
|
DEVICE_VENDOR := Buffalo
|
|
|
|
DEVICE_MODEL := WSR-600DHP
|
|
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-rt2800-pci wpad-basic
|
|
|
|
SUPPORTED_DEVICES += wsr-600
|
|
|
|
endef
|
|
|
|
TARGET_DEVICES += buffalo_wsr-600dhp
|
2016-04-01 07:11:48 +00:00
|
|
|
|
2019-07-03 21:22:08 +00:00
|
|
|
define Device/dlink_dir-860l-b1
|
2018-12-29 18:25:00 +00:00
|
|
|
$(Device/seama)
|
2016-09-14 17:11:19 +00:00
|
|
|
BLOCKSIZE := 64k
|
2018-12-29 18:25:00 +00:00
|
|
|
SEAMA_SIGNATURE := wrgac13_dlink.2013gui_dir860lb
|
2020-04-19 18:49:11 +00:00
|
|
|
LOADER_TYPE := bin
|
|
|
|
KERNEL := kernel-bin | append-dtb | lzma | loader-kernel | \
|
|
|
|
relocate-kernel | lzma -a0 | uImage lzma
|
2019-07-22 16:09:57 +00:00
|
|
|
IMAGE_SIZE := 16064k
|
2019-07-06 12:51:09 +00:00
|
|
|
DEVICE_VENDOR := D-Link
|
|
|
|
DEVICE_MODEL := DIR-860L
|
|
|
|
DEVICE_VARIANT := B1
|
2018-07-10 17:22:41 +00:00
|
|
|
DEVICE_PACKAGES := kmod-mt76x2 kmod-usb3 kmod-usb-ledtrig-usbport wpad-basic
|
2019-07-03 21:22:08 +00:00
|
|
|
SUPPORTED_DEVICES += dir-860l-b1
|
2016-04-01 07:11:48 +00:00
|
|
|
endef
|
2019-07-03 21:22:08 +00:00
|
|
|
TARGET_DEVICES += dlink_dir-860l-b1
|
2016-04-01 07:11:48 +00:00
|
|
|
|
2019-07-07 14:27:51 +00:00
|
|
|
define Device/d-team_newifi-d2
|
2020-04-18 06:19:38 +00:00
|
|
|
$(Device/uimage-lzma-loader)
|
2019-07-22 16:09:57 +00:00
|
|
|
IMAGE_SIZE := 32448k
|
2019-07-07 14:27:51 +00:00
|
|
|
DEVICE_VENDOR := Newifi
|
|
|
|
DEVICE_MODEL := D2
|
2019-12-19 18:40:33 +00:00
|
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 \
|
|
|
|
kmod-usb-ledtrig-usbport wpad-basic
|
2018-02-22 16:08:14 +00:00
|
|
|
endef
|
2019-07-07 14:27:51 +00:00
|
|
|
TARGET_DEVICES += d-team_newifi-d2
|
2018-02-22 16:08:14 +00:00
|
|
|
|
2019-07-07 14:27:51 +00:00
|
|
|
define Device/d-team_pbr-m1
|
2019-07-22 16:09:57 +00:00
|
|
|
IMAGE_SIZE := 16064k
|
2019-07-07 14:27:51 +00:00
|
|
|
DEVICE_VENDOR := PandoraBox
|
|
|
|
DEVICE_MODEL := PBR-M1
|
2020-03-05 13:57:29 +00:00
|
|
|
DEVICE_PACKAGES := kmod-ata-ahci kmod-mt7603 kmod-mt76x2 kmod-sdhci-mt7620 \
|
|
|
|
kmod-usb3 kmod-usb-ledtrig-usbport wpad-basic
|
2019-07-07 14:27:51 +00:00
|
|
|
SUPPORTED_DEVICES += pbr-m1
|
2018-12-08 18:55:56 +00:00
|
|
|
endef
|
2019-07-07 14:27:51 +00:00
|
|
|
TARGET_DEVICES += d-team_pbr-m1
|
2018-12-08 18:55:56 +00:00
|
|
|
|
2019-11-15 22:21:22 +00:00
|
|
|
define Device/edimax_ra21s
|
|
|
|
IMAGE_SIZE := 16064k
|
|
|
|
DEVICE_VENDOR := Edimax
|
|
|
|
DEVICE_MODEL := RA21S
|
|
|
|
DEVICE_ALT0_VENDOR := Edimax
|
|
|
|
DEVICE_ALT0_MODEL := Gemini RA21S
|
|
|
|
IMAGES += factory.bin
|
2020-03-10 13:58:27 +00:00
|
|
|
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size | \
|
2019-11-15 22:21:22 +00:00
|
|
|
elx-header 02020040 8844A2D168B45A2D
|
|
|
|
DEVICE_PACKAGES := kmod-mt7615e wpad-basic
|
|
|
|
endef
|
|
|
|
TARGET_DEVICES += edimax_ra21s
|
|
|
|
|
2019-09-19 19:33:59 +00:00
|
|
|
define Device/edimax_rg21s
|
|
|
|
IMAGE_SIZE := 16064k
|
|
|
|
DEVICE_VENDOR := Edimax
|
|
|
|
DEVICE_MODEL := Gemini AC2600 RG21S
|
|
|
|
IMAGES += factory.bin
|
2020-03-10 13:58:27 +00:00
|
|
|
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size | \
|
2019-12-19 18:40:33 +00:00
|
|
|
elx-header 02020038 8844A2D168B45A2D
|
|
|
|
DEVICE_PACKAGES := kmod-mt7615e wpad-basic
|
2019-09-19 19:33:59 +00:00
|
|
|
endef
|
|
|
|
TARGET_DEVICES += edimax_rg21s
|
|
|
|
|
2018-06-15 15:27:51 +00:00
|
|
|
define Device/elecom_wrc-1167ghbk2-s
|
|
|
|
IMAGE_SIZE := 15488k
|
2019-07-06 12:51:09 +00:00
|
|
|
DEVICE_VENDOR := ELECOM
|
|
|
|
DEVICE_MODEL := WRC-1167GHBK2-S
|
2018-06-15 15:27:51 +00:00
|
|
|
IMAGES += factory.bin
|
2020-03-10 13:58:27 +00:00
|
|
|
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size | \
|
2019-12-19 18:40:33 +00:00
|
|
|
elecom-wrc-factory WRC-1167GHBK2-S 0.00
|
2019-06-27 03:27:27 +00:00
|
|
|
DEVICE_PACKAGES := kmod-mt7615e wpad-basic
|
2018-06-15 15:27:51 +00:00
|
|
|
endef
|
|
|
|
TARGET_DEVICES += elecom_wrc-1167ghbk2-s
|
|
|
|
|
2018-08-18 23:05:15 +00:00
|
|
|
define Device/elecom_wrc-1900gst
|
2020-04-24 05:51:53 +00:00
|
|
|
$(Device/uimage-lzma-loader)
|
2018-08-18 23:05:15 +00:00
|
|
|
IMAGE_SIZE := 11264k
|
2019-07-06 12:51:09 +00:00
|
|
|
DEVICE_VENDOR := ELECOM
|
|
|
|
DEVICE_MODEL := WRC-1900GST
|
2018-08-18 23:05:15 +00:00
|
|
|
IMAGES += factory.bin
|
2020-03-10 13:58:27 +00:00
|
|
|
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size | \
|
2019-12-19 18:40:33 +00:00
|
|
|
elecom-gst-factory WRC-1900GST 0.00
|
2018-08-18 23:05:15 +00:00
|
|
|
endef
|
|
|
|
TARGET_DEVICES += elecom_wrc-1900gst
|
|
|
|
|
2019-07-07 14:27:51 +00:00
|
|
|
define Device/elecom_wrc-2533gst
|
2020-04-24 05:51:53 +00:00
|
|
|
$(Device/uimage-lzma-loader)
|
2019-07-07 14:27:51 +00:00
|
|
|
IMAGE_SIZE := 11264k
|
|
|
|
DEVICE_VENDOR := ELECOM
|
|
|
|
DEVICE_MODEL := WRC-2533GST
|
|
|
|
IMAGES += factory.bin
|
2020-03-10 13:58:27 +00:00
|
|
|
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size | \
|
2019-12-19 18:40:33 +00:00
|
|
|
elecom-gst-factory WRC-2533GST 0.00
|
2017-02-27 20:59:50 +00:00
|
|
|
endef
|
2019-07-07 14:27:51 +00:00
|
|
|
TARGET_DEVICES += elecom_wrc-2533gst
|
2017-02-27 20:59:50 +00:00
|
|
|
|
2019-07-03 21:22:08 +00:00
|
|
|
define Device/firefly_firewrt
|
2019-07-22 16:09:57 +00:00
|
|
|
IMAGE_SIZE := 16064k
|
2019-07-06 12:51:09 +00:00
|
|
|
DEVICE_VENDOR := Firefly
|
|
|
|
DEVICE_MODEL := FireWRT
|
2018-07-10 17:22:41 +00:00
|
|
|
DEVICE_PACKAGES := kmod-mt76x2 kmod-usb3 kmod-usb-ledtrig-usbport wpad-basic
|
2019-07-03 21:22:08 +00:00
|
|
|
SUPPORTED_DEVICES += firewrt
|
2016-04-01 07:11:48 +00:00
|
|
|
endef
|
2019-07-03 21:22:08 +00:00
|
|
|
TARGET_DEVICES += firefly_firewrt
|
2016-04-01 07:11:48 +00:00
|
|
|
|
2018-12-27 05:39:16 +00:00
|
|
|
define Device/gehua_ghl-r-001
|
2019-07-22 16:09:57 +00:00
|
|
|
IMAGE_SIZE := 32448k
|
2019-07-06 12:51:09 +00:00
|
|
|
DEVICE_VENDOR := GeHua
|
|
|
|
DEVICE_MODEL := GHL-R-001
|
2019-12-19 18:40:33 +00:00
|
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 \
|
|
|
|
kmod-usb-ledtrig-usbport wpad-basic
|
2018-12-27 05:39:16 +00:00
|
|
|
endef
|
|
|
|
TARGET_DEVICES += gehua_ghl-r-001
|
|
|
|
|
2018-05-27 00:26:14 +00:00
|
|
|
define Device/gnubee_gb-pc1
|
2019-07-06 12:51:09 +00:00
|
|
|
DEVICE_VENDOR := GnuBee
|
|
|
|
DEVICE_MODEL := Personal Cloud One
|
2020-03-05 13:57:29 +00:00
|
|
|
DEVICE_PACKAGES := kmod-ata-ahci kmod-usb3 kmod-sdhci-mt7620
|
2019-07-22 16:09:57 +00:00
|
|
|
IMAGE_SIZE := 32448k
|
2017-07-22 01:15:56 +00:00
|
|
|
endef
|
2018-05-27 00:26:14 +00:00
|
|
|
TARGET_DEVICES += gnubee_gb-pc1
|
2017-07-22 01:15:56 +00:00
|
|
|
|
2018-02-17 08:54:57 +00:00
|
|
|
define Device/gnubee_gb-pc2
|
2019-07-06 12:51:09 +00:00
|
|
|
DEVICE_VENDOR := GnuBee
|
|
|
|
DEVICE_MODEL := Personal Cloud Two
|
2020-03-05 13:57:29 +00:00
|
|
|
DEVICE_PACKAGES := kmod-ata-ahci kmod-usb3 kmod-sdhci-mt7620
|
2019-07-22 16:09:57 +00:00
|
|
|
IMAGE_SIZE := 32448k
|
2018-02-05 00:24:15 +00:00
|
|
|
endef
|
2018-02-17 08:54:57 +00:00
|
|
|
TARGET_DEVICES += gnubee_gb-pc2
|
2018-02-05 00:24:15 +00:00
|
|
|
|
2019-07-03 21:22:08 +00:00
|
|
|
define Device/hiwifi_hc5962
|
2017-02-22 12:47:22 +00:00
|
|
|
BLOCKSIZE := 128k
|
|
|
|
PAGESIZE := 2048
|
2020-04-06 05:17:43 +00:00
|
|
|
KERNEL_SIZE := 4096k
|
2017-02-22 12:47:22 +00:00
|
|
|
UBINIZE_OPTS := -E 5
|
2019-07-15 12:55:24 +00:00
|
|
|
IMAGE_SIZE := 32768k
|
2017-02-22 12:47:22 +00:00
|
|
|
IMAGES += factory.bin
|
|
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
2019-12-19 18:40:33 +00:00
|
|
|
IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \
|
2020-03-10 13:58:27 +00:00
|
|
|
check-size
|
2019-07-06 12:51:09 +00:00
|
|
|
DEVICE_VENDOR := HiWiFi
|
|
|
|
DEVICE_MODEL := HC5962
|
2018-07-10 17:22:41 +00:00
|
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 wpad-basic
|
2017-02-22 12:47:22 +00:00
|
|
|
endef
|
2019-07-03 21:22:08 +00:00
|
|
|
TARGET_DEVICES += hiwifi_hc5962
|
2017-02-22 12:47:22 +00:00
|
|
|
|
ramips: add support for I-O DATA WN-AX1167GR
I-O DATA WN-AX1167GR is a 2.4/5 GHz band 11ac router, based on
MediaTek MT7621A.
Specification:
- MT7621A (2-Cores, 4-Threads)
- 64 MB of RAM (DDR2)
- 16 MB of Flash (SPI)
- 2T2R 2.4/5 GHz
- 5x 10/100/1000 Mbps Ethernet
- 2x LEDs, 4x keys (2x buttons, 1x slide switch)
- UART header on PCB
- Vcc, GND, TX, RX from ethernet port side
- baudrate: 115200 bps (U-Boot, OpenWrt)
Stock firmware:
In the stock firmware, WN-AX1167GR has two os images each composed of
Linux kernel and rootfs.
These images are stored in "Kernel" and "app" partition of the
following partitions, respectively.
(excerpt from dmesg):
MX25L12805D(c2 2018c220) (16384 Kbytes)
mtd .name = raspi, .size = 0x01000000 (16M) .erasesize = 0x00010000 (64K) .numeraseregions = 0
Creating 10 MTD partitions on "raspi":
0x000000000000-0x000001000000 : "ALL"
0x000000000000-0x000000030000 : "Bootloader"
0x000000030000-0x000000040000 : "Config "
0x000000040000-0x000000050000 : "Factory"
0x000000050000-0x000000060000 : "iNIC_rf"
0x000000060000-0x0000007e0000 : "Kernel"
0x000000800000-0x000000f80000 : "app"
0x000000f90000-0x000000fa0000 : "Key"
0x000000fa0000-0x000000fb0000 : "backup"
0x000000fb0000-0x000001000000 : "storage"
The flag for boot partition is stored in "Key" partition, and U-Boot
reads this and determines the partition to boot.
If the image that U-Boot first reads according to the flag is
"Bad Magic Number", U-Boot then tries to boot from the other image.
If the second image is correct, change the flag to the number
corresponding to that image and boot from that image.
(example):
## Booting image at bc800000 ...
Bad Magic Number,FFFFFFFF
Boot from KERNEL 1 !!
## Booting image at bc060000 ...
Image Name: MIPS OpenWrt Linux-4.14.50
Image Type: MIPS Linux kernel Image (lzma compressed)
Data Size: 1865917 Bytes = 1.8 MB
Load Address: 80001000
Entry Point: 80001000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
raspi_erase_write: offs:f90000, count:34
.
.
Done!
Starting kernel ...
Flash instruction using factory image:
1. Connect the computer to the LAN port of WN-AX1167GR
2. Connect power cable to WN-AX1167GR and turn on it
3. Access to "192.168.0.1" on the web browser and open firmware
update page ("ファームウェア")
4. Select the OpenWrt factory image and perform firmware update
5. On the initramfs image, execute "mtd erase firmware" to erase stock
firmware and execute sysupgrade with sysupgrade image for WN-AX1167GR
6. Wait ~180 seconds to complete flasing
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
2018-06-27 13:47:13 +00:00
|
|
|
define Device/iodata_wn-ax1167gr
|
2020-04-24 05:51:53 +00:00
|
|
|
$(Device/uimage-lzma-loader)
|
ramips: add support for I-O DATA WN-AX1167GR
I-O DATA WN-AX1167GR is a 2.4/5 GHz band 11ac router, based on
MediaTek MT7621A.
Specification:
- MT7621A (2-Cores, 4-Threads)
- 64 MB of RAM (DDR2)
- 16 MB of Flash (SPI)
- 2T2R 2.4/5 GHz
- 5x 10/100/1000 Mbps Ethernet
- 2x LEDs, 4x keys (2x buttons, 1x slide switch)
- UART header on PCB
- Vcc, GND, TX, RX from ethernet port side
- baudrate: 115200 bps (U-Boot, OpenWrt)
Stock firmware:
In the stock firmware, WN-AX1167GR has two os images each composed of
Linux kernel and rootfs.
These images are stored in "Kernel" and "app" partition of the
following partitions, respectively.
(excerpt from dmesg):
MX25L12805D(c2 2018c220) (16384 Kbytes)
mtd .name = raspi, .size = 0x01000000 (16M) .erasesize = 0x00010000 (64K) .numeraseregions = 0
Creating 10 MTD partitions on "raspi":
0x000000000000-0x000001000000 : "ALL"
0x000000000000-0x000000030000 : "Bootloader"
0x000000030000-0x000000040000 : "Config "
0x000000040000-0x000000050000 : "Factory"
0x000000050000-0x000000060000 : "iNIC_rf"
0x000000060000-0x0000007e0000 : "Kernel"
0x000000800000-0x000000f80000 : "app"
0x000000f90000-0x000000fa0000 : "Key"
0x000000fa0000-0x000000fb0000 : "backup"
0x000000fb0000-0x000001000000 : "storage"
The flag for boot partition is stored in "Key" partition, and U-Boot
reads this and determines the partition to boot.
If the image that U-Boot first reads according to the flag is
"Bad Magic Number", U-Boot then tries to boot from the other image.
If the second image is correct, change the flag to the number
corresponding to that image and boot from that image.
(example):
## Booting image at bc800000 ...
Bad Magic Number,FFFFFFFF
Boot from KERNEL 1 !!
## Booting image at bc060000 ...
Image Name: MIPS OpenWrt Linux-4.14.50
Image Type: MIPS Linux kernel Image (lzma compressed)
Data Size: 1865917 Bytes = 1.8 MB
Load Address: 80001000
Entry Point: 80001000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
raspi_erase_write: offs:f90000, count:34
.
.
Done!
Starting kernel ...
Flash instruction using factory image:
1. Connect the computer to the LAN port of WN-AX1167GR
2. Connect power cable to WN-AX1167GR and turn on it
3. Access to "192.168.0.1" on the web browser and open firmware
update page ("ファームウェア")
4. Select the OpenWrt factory image and perform firmware update
5. On the initramfs image, execute "mtd erase firmware" to erase stock
firmware and execute sysupgrade with sysupgrade image for WN-AX1167GR
6. Wait ~180 seconds to complete flasing
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
2018-06-27 13:47:13 +00:00
|
|
|
IMAGE_SIZE := 15552k
|
|
|
|
KERNEL_INITRAMFS := $$(KERNEL) | \
|
2019-12-19 18:40:33 +00:00
|
|
|
iodata-factory 7864320 4 0x1055 $(KDIR)/tmp/$$(KERNEL_INITRAMFS_PREFIX)-factory.bin
|
2019-07-06 12:51:09 +00:00
|
|
|
DEVICE_VENDOR := I-O DATA
|
|
|
|
DEVICE_MODEL := WN-AX1167GR
|
2018-07-10 17:22:41 +00:00
|
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 wpad-basic
|
ramips: add support for I-O DATA WN-AX1167GR
I-O DATA WN-AX1167GR is a 2.4/5 GHz band 11ac router, based on
MediaTek MT7621A.
Specification:
- MT7621A (2-Cores, 4-Threads)
- 64 MB of RAM (DDR2)
- 16 MB of Flash (SPI)
- 2T2R 2.4/5 GHz
- 5x 10/100/1000 Mbps Ethernet
- 2x LEDs, 4x keys (2x buttons, 1x slide switch)
- UART header on PCB
- Vcc, GND, TX, RX from ethernet port side
- baudrate: 115200 bps (U-Boot, OpenWrt)
Stock firmware:
In the stock firmware, WN-AX1167GR has two os images each composed of
Linux kernel and rootfs.
These images are stored in "Kernel" and "app" partition of the
following partitions, respectively.
(excerpt from dmesg):
MX25L12805D(c2 2018c220) (16384 Kbytes)
mtd .name = raspi, .size = 0x01000000 (16M) .erasesize = 0x00010000 (64K) .numeraseregions = 0
Creating 10 MTD partitions on "raspi":
0x000000000000-0x000001000000 : "ALL"
0x000000000000-0x000000030000 : "Bootloader"
0x000000030000-0x000000040000 : "Config "
0x000000040000-0x000000050000 : "Factory"
0x000000050000-0x000000060000 : "iNIC_rf"
0x000000060000-0x0000007e0000 : "Kernel"
0x000000800000-0x000000f80000 : "app"
0x000000f90000-0x000000fa0000 : "Key"
0x000000fa0000-0x000000fb0000 : "backup"
0x000000fb0000-0x000001000000 : "storage"
The flag for boot partition is stored in "Key" partition, and U-Boot
reads this and determines the partition to boot.
If the image that U-Boot first reads according to the flag is
"Bad Magic Number", U-Boot then tries to boot from the other image.
If the second image is correct, change the flag to the number
corresponding to that image and boot from that image.
(example):
## Booting image at bc800000 ...
Bad Magic Number,FFFFFFFF
Boot from KERNEL 1 !!
## Booting image at bc060000 ...
Image Name: MIPS OpenWrt Linux-4.14.50
Image Type: MIPS Linux kernel Image (lzma compressed)
Data Size: 1865917 Bytes = 1.8 MB
Load Address: 80001000
Entry Point: 80001000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
raspi_erase_write: offs:f90000, count:34
.
.
Done!
Starting kernel ...
Flash instruction using factory image:
1. Connect the computer to the LAN port of WN-AX1167GR
2. Connect power cable to WN-AX1167GR and turn on it
3. Access to "192.168.0.1" on the web browser and open firmware
update page ("ファームウェア")
4. Select the OpenWrt factory image and perform firmware update
5. On the initramfs image, execute "mtd erase firmware" to erase stock
firmware and execute sysupgrade with sysupgrade image for WN-AX1167GR
6. Wait ~180 seconds to complete flasing
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
2018-06-27 13:47:13 +00:00
|
|
|
endef
|
|
|
|
TARGET_DEVICES += iodata_wn-ax1167gr
|
|
|
|
|
2020-04-27 10:07:01 +00:00
|
|
|
define Device/iodata_nand
|
|
|
|
DEVICE_VENDOR := I-O DATA
|
2019-08-26 11:27:22 +00:00
|
|
|
BLOCKSIZE := 128k
|
|
|
|
PAGESIZE := 2048
|
|
|
|
UBINIZE_OPTS := -E 5
|
|
|
|
KERNEL_SIZE := 4096k
|
|
|
|
IMAGE_SIZE := 51200k
|
2020-04-26 03:24:33 +00:00
|
|
|
LOADER_TYPE := bin
|
|
|
|
KERNEL := kernel-bin | append-dtb | lzma | loader-kernel | lzma | uImage lzma
|
2020-04-27 10:07:01 +00:00
|
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
|
|
endef
|
|
|
|
|
|
|
|
define Device/iodata_wn-ax1167gr2
|
|
|
|
$(Device/iodata_nand)
|
|
|
|
UIMAGE_MAGIC := 0x434f4d42
|
|
|
|
DEVICE_MODEL := WN-AX1167GR2
|
2019-08-26 11:27:22 +00:00
|
|
|
KERNEL_INITRAMFS := $(KERNEL_DTB) | custom-initramfs-uimage 3.10(XBC.1)b10 | \
|
|
|
|
iodata-mstc-header
|
|
|
|
DEVICE_PACKAGES := kmod-mt7615e wpad-basic
|
|
|
|
endef
|
|
|
|
TARGET_DEVICES += iodata_wn-ax1167gr2
|
|
|
|
|
ramips: add support for I-O DATA WN-AX2033GR
I-O DATA WN-AX2033GR is roughly the same as I-O DATA
WN-AX1167GR2. The difference is Wi-Fi feature.
Specification
=============
- SoC: MediaTek MT7621A
- RAM: DDR3 128 MiB
- Flash Memory: NAND 128 MiB (Spansion S34ML01G200TF100)
- Wi-Fi: MediaTek MT7603E
- Wi-Fi: MediaTek MT7615
- Ethernet: 5x 10 Mbps / 100 Mbps / 1000 Mbps (1x WAN, 4x LAN)
- LED: 2x green LED
- Input: 2x tactile switch, 1x slide switch
- Serial console: 57600bps, PCB through hole J5 (Vcc, TX, RX, NC, GND)
- Power: DC 12V
This device only supports channel 1-13 and 36-140.
Thus, narrower frequency limits compared to other devices are required
for limiting wi-fi frequency correctly.
Without this, non-supported frequencies are activated.
Flash instructions
==================
1. Open the router management page (192.168.0.1).
2. Update router firmware using "initramfs-kernel.bin".
3. After updating, run sysupgrade with "sysupgrade.bin".
Recovery instructions
=====================
WN-AX2033GR contains Zyxel Z-LOADER
1. Setup TFTP server (IP address: 10.10.10.3).
2. Put official firmware into TFTP server directory (distribution site:
https://www.iodata.jp/lib/software/w/2068.htm)
3. Connect WX-AX2033GR Ethernet port and computer that runs TFTP server.
4. Connect to serial console.
5. Interrupt booting by Esc key.
6. Flash firmware using "ATNR 1,[firmware filename]" command.
Signed-off-by: Yanase Yuki <dev@zpc.sakura.ne.jp>
[adjust for kernel 5.4, add recovery instructions/frequency comment]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-02-06 03:00:47 +00:00
|
|
|
define Device/iodata_wn-ax2033gr
|
2020-04-27 10:07:01 +00:00
|
|
|
$(Device/iodata_nand)
|
ramips: add support for I-O DATA WN-AX2033GR
I-O DATA WN-AX2033GR is roughly the same as I-O DATA
WN-AX1167GR2. The difference is Wi-Fi feature.
Specification
=============
- SoC: MediaTek MT7621A
- RAM: DDR3 128 MiB
- Flash Memory: NAND 128 MiB (Spansion S34ML01G200TF100)
- Wi-Fi: MediaTek MT7603E
- Wi-Fi: MediaTek MT7615
- Ethernet: 5x 10 Mbps / 100 Mbps / 1000 Mbps (1x WAN, 4x LAN)
- LED: 2x green LED
- Input: 2x tactile switch, 1x slide switch
- Serial console: 57600bps, PCB through hole J5 (Vcc, TX, RX, NC, GND)
- Power: DC 12V
This device only supports channel 1-13 and 36-140.
Thus, narrower frequency limits compared to other devices are required
for limiting wi-fi frequency correctly.
Without this, non-supported frequencies are activated.
Flash instructions
==================
1. Open the router management page (192.168.0.1).
2. Update router firmware using "initramfs-kernel.bin".
3. After updating, run sysupgrade with "sysupgrade.bin".
Recovery instructions
=====================
WN-AX2033GR contains Zyxel Z-LOADER
1. Setup TFTP server (IP address: 10.10.10.3).
2. Put official firmware into TFTP server directory (distribution site:
https://www.iodata.jp/lib/software/w/2068.htm)
3. Connect WX-AX2033GR Ethernet port and computer that runs TFTP server.
4. Connect to serial console.
5. Interrupt booting by Esc key.
6. Flash firmware using "ATNR 1,[firmware filename]" command.
Signed-off-by: Yanase Yuki <dev@zpc.sakura.ne.jp>
[adjust for kernel 5.4, add recovery instructions/frequency comment]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-02-06 03:00:47 +00:00
|
|
|
UIMAGE_MAGIC := 0x434f4d42
|
|
|
|
DEVICE_MODEL := WN-AX2033GR
|
|
|
|
KERNEL_INITRAMFS := $(KERNEL_DTB) | custom-initramfs-uimage 3.10(VST.1)C10 | \
|
|
|
|
iodata-mstc-header
|
|
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e wpad-basic
|
|
|
|
endef
|
|
|
|
TARGET_DEVICES += iodata_wn-ax2033gr
|
|
|
|
|
2019-04-09 05:48:31 +00:00
|
|
|
define Device/iodata_wn-dx1167r
|
2020-04-27 10:07:01 +00:00
|
|
|
$(Device/iodata_nand)
|
2019-04-09 05:48:31 +00:00
|
|
|
UIMAGE_MAGIC := 0x434f4d43
|
|
|
|
DEVICE_MODEL := WN-DX1167R
|
|
|
|
KERNEL_INITRAMFS := $(KERNEL_DTB) | custom-initramfs-uimage 3.10(XIK.1)b10 | \
|
|
|
|
iodata-mstc-header
|
|
|
|
DEVICE_PACKAGES := kmod-mt7615e wpad-basic
|
|
|
|
endef
|
|
|
|
TARGET_DEVICES += iodata_wn-dx1167r
|
|
|
|
|
ramips: add support for I-O DATA WN-GX300GR
I-O DATA WN-GX300GR is a 2.4 GHz band 11n router, based on MediaTek
MT7621S.
Specification:
- MT7621S (1-Core, 2-Threads)
- 64 MB of RAM
- 8 MB of Flash (SPI)
- 2T2R 2.4 GHz
- 5x 10/100/1000 Mbps Ethernet
- 2x LEDs, 4x keys (2x buttons, 1x slide switch)
- UART header on PCB
- Vcc, GND, TX, RX from ethernet port side
- baudrate: 115200 bps (U-Boot, OpenWrt)
Flash instruction using initramfs image:
1. Connect serial cable to UART header
2. Rename OpenWrt initramfs image for WN-GX300GR to "uImageWN-GX300GR"
and place it in the TFTP directory
3. Set the IP address of the computer to 192.168.99.8, connect to the
LAN port of WN-GX300GR, and start the TFTP server on the computer
4. Connect power cable to WN-GX300GR and turn on the router
5. Press "1" key on the serial console to interrupt boot process on
U-Boot, press Enter key 3 times and start firmware download via TFTP
6. WN-GX300GR downloads initramfs image and boot with it
7. On the initramfs image, execute "mtd erase firmware" to erase stock
firmware and execute sysupgrade with sysupgrade image for WN-GX300GR
8. Wait ~150 seconds to complete flasing
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
2018-05-16 12:42:48 +00:00
|
|
|
define Device/iodata_wn-gx300gr
|
2020-04-24 05:51:53 +00:00
|
|
|
$(Device/uimage-lzma-loader)
|
2019-07-15 12:55:40 +00:00
|
|
|
IMAGE_SIZE := 7616k
|
2019-07-06 12:51:09 +00:00
|
|
|
DEVICE_VENDOR := I-O DATA
|
|
|
|
DEVICE_MODEL := WN-GX300GR
|
2018-07-10 17:22:41 +00:00
|
|
|
DEVICE_PACKAGES := kmod-mt7603 wpad-basic
|
ramips: add support for I-O DATA WN-GX300GR
I-O DATA WN-GX300GR is a 2.4 GHz band 11n router, based on MediaTek
MT7621S.
Specification:
- MT7621S (1-Core, 2-Threads)
- 64 MB of RAM
- 8 MB of Flash (SPI)
- 2T2R 2.4 GHz
- 5x 10/100/1000 Mbps Ethernet
- 2x LEDs, 4x keys (2x buttons, 1x slide switch)
- UART header on PCB
- Vcc, GND, TX, RX from ethernet port side
- baudrate: 115200 bps (U-Boot, OpenWrt)
Flash instruction using initramfs image:
1. Connect serial cable to UART header
2. Rename OpenWrt initramfs image for WN-GX300GR to "uImageWN-GX300GR"
and place it in the TFTP directory
3. Set the IP address of the computer to 192.168.99.8, connect to the
LAN port of WN-GX300GR, and start the TFTP server on the computer
4. Connect power cable to WN-GX300GR and turn on the router
5. Press "1" key on the serial console to interrupt boot process on
U-Boot, press Enter key 3 times and start firmware download via TFTP
6. WN-GX300GR downloads initramfs image and boot with it
7. On the initramfs image, execute "mtd erase firmware" to erase stock
firmware and execute sysupgrade with sysupgrade image for WN-GX300GR
8. Wait ~150 seconds to complete flasing
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
2018-05-16 12:42:48 +00:00
|
|
|
endef
|
|
|
|
TARGET_DEVICES += iodata_wn-gx300gr
|
|
|
|
|
2019-07-11 05:41:08 +00:00
|
|
|
define Device/iodata_wnpr2600g
|
2020-04-24 05:51:53 +00:00
|
|
|
$(Device/uimage-lzma-loader)
|
2019-07-11 05:41:08 +00:00
|
|
|
DEVICE_VENDOR := I-O DATA
|
|
|
|
DEVICE_MODEL := WNPR2600G
|
|
|
|
IMAGE_SIZE := 13952k
|
|
|
|
IMAGES += factory.bin
|
2020-03-10 13:58:27 +00:00
|
|
|
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size | \
|
2019-12-19 18:40:33 +00:00
|
|
|
elx-header 0104003a 8844A2D168B45A2D
|
2019-07-11 05:41:08 +00:00
|
|
|
DEVICE_PACKAGES := kmod-mt7615e wpad-basic
|
|
|
|
endef
|
|
|
|
TARGET_DEVICES += iodata_wnpr2600g
|
|
|
|
|
2019-11-11 16:25:31 +00:00
|
|
|
define Device/iptime_a6ns-m
|
|
|
|
IMAGE_SIZE := 16128k
|
|
|
|
UIMAGE_NAME := a6nm
|
|
|
|
DEVICE_VENDOR := ipTIME
|
|
|
|
DEVICE_MODEL := A6ns-M
|
|
|
|
DEVICE_PACKAGES := kmod-mt7615e kmod-usb3 kmod-usb-ledtrig-usbport wpad-basic
|
|
|
|
endef
|
|
|
|
TARGET_DEVICES += iptime_a6ns-m
|
|
|
|
|
2019-10-06 20:06:31 +00:00
|
|
|
define Device/iptime_a8004t
|
|
|
|
IMAGE_SIZE := 16128k
|
|
|
|
UIMAGE_NAME := a8004t
|
|
|
|
DEVICE_VENDOR := ipTIME
|
|
|
|
DEVICE_MODEL := A8004T
|
|
|
|
DEVICE_PACKAGES := kmod-mt7615e kmod-usb3 wpad-basic
|
|
|
|
endef
|
|
|
|
TARGET_DEVICES += iptime_a8004t
|
|
|
|
|
2019-12-13 16:24:19 +00:00
|
|
|
define Device/jcg_jhr-ac876m
|
|
|
|
IMAGE_SIZE := 16064k
|
|
|
|
IMAGES += factory.bin
|
2020-03-10 13:58:27 +00:00
|
|
|
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size | \
|
2019-12-19 18:40:33 +00:00
|
|
|
jcg-header 89.1
|
2019-12-13 16:24:19 +00:00
|
|
|
JCG_MAXSIZE := 16064k
|
|
|
|
DEVICE_VENDOR := JCG
|
|
|
|
DEVICE_MODEL := JHR-AC876M
|
|
|
|
DEVICE_PACKAGES := kmod-mt7615e kmod-usb3 kmod-usb-ledtrig-usbport wpad-basic
|
|
|
|
endef
|
|
|
|
TARGET_DEVICES += jcg_jhr-ac876m
|
|
|
|
|
2019-07-07 14:27:51 +00:00
|
|
|
define Device/lenovo_newifi-d1
|
2020-04-18 06:19:38 +00:00
|
|
|
$(Device/uimage-lzma-loader)
|
2019-07-22 16:09:57 +00:00
|
|
|
IMAGE_SIZE := 32448k
|
2019-07-07 14:27:51 +00:00
|
|
|
DEVICE_VENDOR := Newifi
|
|
|
|
DEVICE_MODEL := D1
|
2019-12-19 18:40:33 +00:00
|
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 kmod-sdhci-mt7620 \
|
|
|
|
kmod-usb-ledtrig-usbport wpad-basic
|
2019-07-07 14:27:51 +00:00
|
|
|
SUPPORTED_DEVICES += newifi-d1
|
2019-06-25 15:32:20 +00:00
|
|
|
endef
|
2019-07-07 14:27:51 +00:00
|
|
|
TARGET_DEVICES += lenovo_newifi-d1
|
2019-06-25 15:32:20 +00:00
|
|
|
|
2019-07-07 14:27:51 +00:00
|
|
|
define Device/linksys_re6500
|
2019-07-22 16:09:57 +00:00
|
|
|
IMAGE_SIZE := 7872k
|
2019-07-07 14:27:51 +00:00
|
|
|
DEVICE_VENDOR := Linksys
|
|
|
|
DEVICE_MODEL := RE6500
|
|
|
|
DEVICE_PACKAGES := kmod-mt76x2 wpad-basic
|
|
|
|
SUPPORTED_DEVICES += re6500
|
ramips: add support for Xiaomi Mi Router 3 Pro
Hardware:
CPU: MediaTek MT7621AT (2x880MHz)
RAM: 512MB DDR3
FLASH: 256MB NAND
WiFi: 2.4GHz 4x4 MT7615 b/g/n (Needs driver, See Issues!)
WiFI: 5GHz 4x4 MT7615 a/n/ac (Needs driver, See Issues!)
USB: 1x 3.0
ETH: 1x WAN 10/100/1000 3x LAN 10/100/1000
LED: Power/Status
BTN: RESET
UART: 115200 8n1
Partition layout and boot:
Stock Xiaomi firmware has the MTD split into (among others)
- kernel0 (@0x200000)
- kernel1 (@0x600000)
- rootfs0
- rootfs1
- overlay (ubi)
Xiaomi uboot expects to find kernels at 0x200000 & 0x600000
referred to as system 1 & system 2 respectively.
a kernel is considered suitable for handing control over
if its linux magic number exists & uImage CRC are correct.
If either of those conditions fail, a matching sys'n'_fail flag
is set in uboot env & a restart performed in the hope that the
alternate kernel is okay.
If neither kernel checksums ok and both are marked failed, system 2
is booted anyway.
Note uboot's tftp flash install writes the transferred
image to both kernel partitions.
Installation:
Similar to the Xiaomi MIR3G, we keep stock Xiaomi firmware in
kernel0 for ease of recovery, and install OpenWRT into kernel1 and
after.
The installation file for OpenWRT is a *squashfs-factory.bin file that
contains the kernel and a ubi partition. This is flashed as follows:
nvram set flag_try_sys1_failed=1
nvram set flag_try_sys2_failed=0
nvram commit
dd if=factory.bin bs=1M count=4 | mtd write - kernel1
dd if=factory.bin bs=1M skip=4 | mtd write - rootfs0
reboot
Reverting to stock:
The part of stock firmware we've kept in kernel0 allows us to run stock
recovery, which will re-flash stock firmware from a *.bin file on a USB.
For this we do the following:
fw_setenv flag_try_sys1_failed 0
fw_setenv flag_try_sys2_failed 1
reboot
After reboot the LED status light will blink red, at which point pressing
the 'reset' button will cause stock firmware to be installed from USB.
Issues:
OpenWRT currently does not have support for the MT7615 wifi chips. There is
ongoing work to add mt7615 support to the open source mt76 driver. Until that
support is in place, there are closed-source kernel modules that can be used.
See: https://forum.openwrt.org/t/support-for-xiaomi-wifi-r3p-pro/20290/170
Signed-off-by: Ozgur Can Leonard <ozgurcan@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
[02_network remaps, Added link to notes]
2019-03-05 08:41:37 +00:00
|
|
|
endef
|
2019-07-07 14:27:51 +00:00
|
|
|
TARGET_DEVICES += linksys_re6500
|
ramips: add support for Xiaomi Mi Router 3 Pro
Hardware:
CPU: MediaTek MT7621AT (2x880MHz)
RAM: 512MB DDR3
FLASH: 256MB NAND
WiFi: 2.4GHz 4x4 MT7615 b/g/n (Needs driver, See Issues!)
WiFI: 5GHz 4x4 MT7615 a/n/ac (Needs driver, See Issues!)
USB: 1x 3.0
ETH: 1x WAN 10/100/1000 3x LAN 10/100/1000
LED: Power/Status
BTN: RESET
UART: 115200 8n1
Partition layout and boot:
Stock Xiaomi firmware has the MTD split into (among others)
- kernel0 (@0x200000)
- kernel1 (@0x600000)
- rootfs0
- rootfs1
- overlay (ubi)
Xiaomi uboot expects to find kernels at 0x200000 & 0x600000
referred to as system 1 & system 2 respectively.
a kernel is considered suitable for handing control over
if its linux magic number exists & uImage CRC are correct.
If either of those conditions fail, a matching sys'n'_fail flag
is set in uboot env & a restart performed in the hope that the
alternate kernel is okay.
If neither kernel checksums ok and both are marked failed, system 2
is booted anyway.
Note uboot's tftp flash install writes the transferred
image to both kernel partitions.
Installation:
Similar to the Xiaomi MIR3G, we keep stock Xiaomi firmware in
kernel0 for ease of recovery, and install OpenWRT into kernel1 and
after.
The installation file for OpenWRT is a *squashfs-factory.bin file that
contains the kernel and a ubi partition. This is flashed as follows:
nvram set flag_try_sys1_failed=1
nvram set flag_try_sys2_failed=0
nvram commit
dd if=factory.bin bs=1M count=4 | mtd write - kernel1
dd if=factory.bin bs=1M skip=4 | mtd write - rootfs0
reboot
Reverting to stock:
The part of stock firmware we've kept in kernel0 allows us to run stock
recovery, which will re-flash stock firmware from a *.bin file on a USB.
For this we do the following:
fw_setenv flag_try_sys1_failed 0
fw_setenv flag_try_sys2_failed 1
reboot
After reboot the LED status light will blink red, at which point pressing
the 'reset' button will cause stock firmware to be installed from USB.
Issues:
OpenWRT currently does not have support for the MT7615 wifi chips. There is
ongoing work to add mt7615 support to the open source mt76 driver. Until that
support is in place, there are closed-source kernel modules that can be used.
See: https://forum.openwrt.org/t/support-for-xiaomi-wifi-r3p-pro/20290/170
Signed-off-by: Ozgur Can Leonard <ozgurcan@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
[02_network remaps, Added link to notes]
2019-03-05 08:41:37 +00:00
|
|
|
|
2019-07-07 14:27:51 +00:00
|
|
|
define Device/mediatek_ap-mt7621a-v60
|
2019-07-22 16:09:57 +00:00
|
|
|
IMAGE_SIZE := 7872k
|
2019-07-07 14:27:51 +00:00
|
|
|
DEVICE_VENDOR := Mediatek
|
|
|
|
DEVICE_MODEL := AP-MT7621A-V60 EVB
|
|
|
|
DEVICE_PACKAGES := kmod-usb3 kmod-sdhci-mt7620 kmod-sound-mt7620
|
2017-08-12 14:56:11 +00:00
|
|
|
endef
|
2019-07-07 14:27:51 +00:00
|
|
|
TARGET_DEVICES += mediatek_ap-mt7621a-v60
|
2017-08-12 14:56:11 +00:00
|
|
|
|
2019-07-03 21:22:08 +00:00
|
|
|
define Device/mediatek_mt7621-eval-board
|
2016-11-19 17:27:22 +00:00
|
|
|
BLOCKSIZE := 64k
|
2019-07-15 12:55:24 +00:00
|
|
|
IMAGE_SIZE := 15104k
|
2019-07-06 12:51:09 +00:00
|
|
|
DEVICE_VENDOR := MediaTek
|
|
|
|
DEVICE_MODEL := MT7621 EVB
|
2019-07-03 21:22:08 +00:00
|
|
|
SUPPORTED_DEVICES += mt7621
|
2016-11-19 17:27:22 +00:00
|
|
|
endef
|
2019-07-03 21:22:08 +00:00
|
|
|
TARGET_DEVICES += mediatek_mt7621-eval-board
|
2016-11-19 17:27:22 +00:00
|
|
|
|
2019-07-07 14:27:51 +00:00
|
|
|
define Device/MikroTik
|
|
|
|
DEVICE_VENDOR := MikroTik
|
|
|
|
BLOCKSIZE := 64k
|
|
|
|
IMAGE_SIZE := 16128k
|
|
|
|
DEVICE_PACKAGES := kmod-usb3
|
|
|
|
LOADER_TYPE := elf
|
|
|
|
KERNEL := $(KERNEL_DTB) | loader-kernel
|
2019-12-19 18:40:33 +00:00
|
|
|
IMAGE/sysupgrade.bin := append-kernel | kernel2minor -s 1024 | \
|
|
|
|
pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | append-metadata | \
|
2020-03-10 13:58:27 +00:00
|
|
|
check-size
|
2016-09-27 06:25:04 +00:00
|
|
|
endef
|
|
|
|
|
2020-04-07 08:34:33 +00:00
|
|
|
define Device/mikrotik_routerboard-750gr3
|
2019-07-07 14:27:51 +00:00
|
|
|
$(Device/MikroTik)
|
2020-04-07 08:34:33 +00:00
|
|
|
DEVICE_MODEL := RouterBOARD 750Gr3
|
2019-07-07 14:27:51 +00:00
|
|
|
DEVICE_PACKAGES += kmod-gpio-beeper
|
2020-04-07 08:34:33 +00:00
|
|
|
SUPPORTED_DEVICES += mikrotik,rb750gr3
|
2019-07-07 14:27:51 +00:00
|
|
|
endef
|
2020-04-07 08:34:33 +00:00
|
|
|
TARGET_DEVICES += mikrotik_routerboard-750gr3
|
2019-07-07 14:27:51 +00:00
|
|
|
|
2020-04-07 08:34:33 +00:00
|
|
|
define Device/mikrotik_routerboard-m11g
|
2019-07-07 14:27:51 +00:00
|
|
|
$(Device/MikroTik)
|
|
|
|
DEVICE_MODEL := RouterBOARD M11G
|
2020-04-07 08:34:33 +00:00
|
|
|
SUPPORTED_DEVICES += mikrotik,rbm11g
|
2019-07-07 14:27:51 +00:00
|
|
|
endef
|
2020-04-07 08:34:33 +00:00
|
|
|
TARGET_DEVICES += mikrotik_routerboard-m11g
|
2019-07-07 14:27:51 +00:00
|
|
|
|
2020-04-07 08:34:33 +00:00
|
|
|
define Device/mikrotik_routerboard-m33g
|
2019-07-07 14:27:51 +00:00
|
|
|
$(Device/MikroTik)
|
|
|
|
DEVICE_MODEL := RouterBOARD M33G
|
2020-04-07 08:34:33 +00:00
|
|
|
SUPPORTED_DEVICES += mikrotik,rbm33g
|
2019-07-07 14:27:51 +00:00
|
|
|
endef
|
2020-04-07 08:34:33 +00:00
|
|
|
TARGET_DEVICES += mikrotik_routerboard-m33g
|
2019-07-07 14:27:51 +00:00
|
|
|
|
2019-07-10 15:57:36 +00:00
|
|
|
define Device/mqmaker_witi
|
2019-07-22 16:09:57 +00:00
|
|
|
IMAGE_SIZE := 16064k
|
2019-07-07 14:27:51 +00:00
|
|
|
DEVICE_VENDOR := MQmaker
|
|
|
|
DEVICE_MODEL := WiTi
|
2020-03-05 13:57:29 +00:00
|
|
|
DEVICE_PACKAGES := kmod-ata-ahci kmod-mt76x2 kmod-sdhci-mt7620 kmod-usb3 \
|
|
|
|
kmod-usb-ledtrig-usbport wpad-basic
|
2019-07-10 15:57:36 +00:00
|
|
|
SUPPORTED_DEVICES += witi mqmaker,witi-256m mqmaker,witi-512m
|
ramips: add support for newifi d2
Previously Newifi D2 could only use PandoraBox M1's firmware.
It works fine, but LED GPIO is different.
As a result, a separated DTS file for this device should be implemented.
Hardware spec:
* CPU: MTK MT7621A
* RAM: 512MB
* ROM: 32MB SPI Flash
* WiFi: MTK MT7603+MT7612
* Button: 2 buttons (reset, wps)
* LED: 3 single-color LEDs (USB, WiFi 2.4GHz, WiFi 5GHz) &
2 dual-color LEDs (Power, Internet)
* Ethernet: 5 ports, 4 LAN + 1 WAN
Installation method:
Same as Newifi D1, users may need to request unlock code from the device
manufacturer. Otherwise, a SPI flash programmer may be necessary to get
the firmware flashed. After the device is unlocked, press and hold reset
button before power cable plugs in. Then go to http://192.168.1.1 to
upload and flash the firmware package.
Signed-off-by: Jackson Ming Hu <huming2207@gmail.com>
2017-12-15 03:51:33 +00:00
|
|
|
endef
|
2019-07-10 15:57:36 +00:00
|
|
|
TARGET_DEVICES += mqmaker_witi
|
2016-04-01 07:11:48 +00:00
|
|
|
|
2019-07-07 14:27:51 +00:00
|
|
|
define Device/mtc_wr1201
|
|
|
|
IMAGE_SIZE := 16000k
|
|
|
|
DEVICE_VENDOR := MTC
|
|
|
|
DEVICE_MODEL := Wireless Router WR1201
|
2019-09-24 18:02:04 +00:00
|
|
|
KERNEL_INITRAMFS := $(KERNEL_DTB) | custom-initramfs-uimage WR1201_8_128
|
2019-12-19 18:40:33 +00:00
|
|
|
DEVICE_PACKAGES := kmod-sdhci-mt7620 kmod-mt76x2 kmod-usb3 \
|
|
|
|
kmod-usb-ledtrig-usbport wpad-basic
|
2017-03-11 07:44:33 +00:00
|
|
|
endef
|
2019-07-07 14:27:51 +00:00
|
|
|
TARGET_DEVICES += mtc_wr1201
|
2017-03-11 07:44:33 +00:00
|
|
|
|
2019-03-21 14:55:09 +00:00
|
|
|
define Device/netgear_ex6150
|
2019-07-06 12:51:09 +00:00
|
|
|
DEVICE_VENDOR := NETGEAR
|
|
|
|
DEVICE_MODEL := EX6150
|
2019-03-21 14:55:09 +00:00
|
|
|
DEVICE_PACKAGES := kmod-mt76x2 wpad-basic
|
|
|
|
NETGEAR_BOARD_ID := U12H318T00_NETGEAR
|
|
|
|
IMAGE_SIZE := 14848k
|
|
|
|
IMAGES += factory.chk
|
2020-03-10 13:58:27 +00:00
|
|
|
IMAGE/factory.chk := $$(sysupgrade_bin) | check-size | \
|
2019-12-19 18:40:33 +00:00
|
|
|
netgear-chk
|
2019-03-21 14:55:09 +00:00
|
|
|
endef
|
|
|
|
TARGET_DEVICES += netgear_ex6150
|
|
|
|
|
2019-10-21 12:43:21 +00:00
|
|
|
define Device/netgear_sercomm_nand
|
2020-04-15 01:32:02 +00:00
|
|
|
$(Device/uimage-lzma-loader)
|
2018-08-24 01:36:13 +00:00
|
|
|
BLOCKSIZE := 128k
|
|
|
|
PAGESIZE := 2048
|
|
|
|
KERNEL_SIZE := 4096k
|
|
|
|
UBINIZE_OPTS := -E 5
|
2019-08-27 21:55:12 +00:00
|
|
|
IMAGES += factory.img kernel.bin rootfs.bin
|
2019-12-19 18:40:33 +00:00
|
|
|
IMAGE/factory.img := pad-extra 2048k | append-kernel | pad-to 6144k | \
|
|
|
|
append-ubi | pad-to $$$$(BLOCKSIZE) | sercom-footer | pad-to 128 | \
|
2019-10-21 12:43:21 +00:00
|
|
|
zip $$$$(SERCOMM_HWNAME).bin | sercom-seal
|
2018-08-24 01:36:13 +00:00
|
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
|
|
IMAGE/kernel.bin := append-kernel
|
2020-03-10 13:58:27 +00:00
|
|
|
IMAGE/rootfs.bin := append-ubi | check-size
|
2019-07-06 12:51:09 +00:00
|
|
|
DEVICE_VENDOR := NETGEAR
|
2019-10-21 12:43:21 +00:00
|
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-usb3 kmod-usb-ledtrig-usbport wpad-basic
|
|
|
|
endef
|
|
|
|
|
|
|
|
define Device/netgear_r6220
|
|
|
|
$(Device/netgear_sercomm_nand)
|
2019-07-07 14:27:51 +00:00
|
|
|
DEVICE_MODEL := R6220
|
2019-10-21 12:43:21 +00:00
|
|
|
SERCOMM_HWNAME := R6220
|
|
|
|
SERCOMM_HWID := AYA
|
|
|
|
SERCOMM_HWVER := A001
|
|
|
|
SERCOMM_SWVER := 0x0086
|
|
|
|
IMAGE_SIZE := 28672k
|
|
|
|
DEVICE_PACKAGES += kmod-mt76x2
|
2019-07-07 14:27:51 +00:00
|
|
|
SUPPORTED_DEVICES += r6220
|
2018-08-24 01:36:13 +00:00
|
|
|
endef
|
2019-07-07 14:27:51 +00:00
|
|
|
TARGET_DEVICES += netgear_r6220
|
2018-08-24 01:36:13 +00:00
|
|
|
|
2019-08-29 08:08:38 +00:00
|
|
|
|
|
|
|
define Device/netgear_r6260
|
2019-10-21 12:43:21 +00:00
|
|
|
$(Device/netgear_sercomm_nand)
|
2019-08-29 08:08:38 +00:00
|
|
|
DEVICE_MODEL := R6260
|
2019-10-21 12:43:21 +00:00
|
|
|
SERCOMM_HWNAME := R6260
|
|
|
|
SERCOMM_HWID := CHJ
|
|
|
|
SERCOMM_HWVER := A001
|
|
|
|
SERCOMM_SWVER := 0x0052
|
|
|
|
IMAGE_SIZE := 40960k
|
|
|
|
DEVICE_PACKAGES += kmod-mt7615e
|
2019-08-29 08:08:38 +00:00
|
|
|
endef
|
|
|
|
TARGET_DEVICES += netgear_r6260
|
|
|
|
|
|
|
|
define Device/netgear_r6350
|
2019-10-21 12:43:21 +00:00
|
|
|
$(Device/netgear_sercomm_nand)
|
2019-08-29 08:08:38 +00:00
|
|
|
DEVICE_MODEL := R6350
|
2019-10-21 12:43:21 +00:00
|
|
|
SERCOMM_HWNAME := R6350
|
|
|
|
SERCOMM_HWID := CHJ
|
|
|
|
SERCOMM_HWVER := A001
|
|
|
|
SERCOMM_SWVER := 0x0052
|
|
|
|
IMAGE_SIZE := 40960k
|
|
|
|
DEVICE_PACKAGES += kmod-mt7615e
|
2019-08-29 08:08:38 +00:00
|
|
|
endef
|
2019-07-07 14:27:51 +00:00
|
|
|
TARGET_DEVICES += netgear_r6350
|
2018-06-25 20:51:43 +00:00
|
|
|
|
ramips: add support for NETGEAR R6700v2/AC2400
SoC: MediaTek MT7621AT
RAM: 256M DDR3
FLASH: 128M NAND
WiFi: MediaTek MT7615N an+ac
MediaTek MT7615N bgn
ETH: MediaTek MT7621AT
BTN: 1x Connect (WPS), 1x WLAN, 1x Reset
LED: Power (white/amber), WAN(white/amber), 2.4G(white), 5G(white),
USB(white) , GuestWifi(white) 4x LAN(white/amber), Wifi Button(white),
WPS Button(white)
Installation:
Login to netgear webinterface and flash factory.img
Based on a discontinued GitHub Pull Request by
kuyokushin <codenamezero@protonmail.com>
https://github.com/openwrt/openwrt/pull/2545
NOTE: Netgear R6700 v2 have five clones: R6900 v2, R7450, Nighthawk
AC2400, Nighthawk AC2100 and already added R6800. Rest of them should
be really easy supportable. Image for R6700v2 should work perfectly with
them. Please refer:
https://github.com/openwrt/openwrt/pull/2614
Tested-by: Víctor Gibrán <victorgibranmz@hotmail.com> [R6700v2]
Tested-by: John Landrum <jl31m10@yahoo.com> [AC2400]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
[add guest led to mt7621_netgear_r6700-v2.dts end edit commit message]
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2019-12-27 18:05:06 +00:00
|
|
|
define Device/netgear_r6700-v2
|
|
|
|
$(Device/netgear_sercomm_nand)
|
|
|
|
DEVICE_MODEL := R6700
|
|
|
|
DEVICE_VARIANT := v2
|
|
|
|
DEVICE_ALT0_VENDOR := NETGEAR
|
|
|
|
DEVICE_ALT0_MODEL := Nighthawk AC2400
|
2020-04-15 13:43:51 +00:00
|
|
|
DEVICE_ALT0_VARIANT := v1
|
|
|
|
DEVICE_ALT1_VENDOR := NETGEAR
|
|
|
|
DEVICE_ALT1_MODEL := R7200
|
|
|
|
DEVICE_ALT1_VARIANT := v1
|
ramips: add support for NETGEAR R6700v2/AC2400
SoC: MediaTek MT7621AT
RAM: 256M DDR3
FLASH: 128M NAND
WiFi: MediaTek MT7615N an+ac
MediaTek MT7615N bgn
ETH: MediaTek MT7621AT
BTN: 1x Connect (WPS), 1x WLAN, 1x Reset
LED: Power (white/amber), WAN(white/amber), 2.4G(white), 5G(white),
USB(white) , GuestWifi(white) 4x LAN(white/amber), Wifi Button(white),
WPS Button(white)
Installation:
Login to netgear webinterface and flash factory.img
Based on a discontinued GitHub Pull Request by
kuyokushin <codenamezero@protonmail.com>
https://github.com/openwrt/openwrt/pull/2545
NOTE: Netgear R6700 v2 have five clones: R6900 v2, R7450, Nighthawk
AC2400, Nighthawk AC2100 and already added R6800. Rest of them should
be really easy supportable. Image for R6700v2 should work perfectly with
them. Please refer:
https://github.com/openwrt/openwrt/pull/2614
Tested-by: Víctor Gibrán <victorgibranmz@hotmail.com> [R6700v2]
Tested-by: John Landrum <jl31m10@yahoo.com> [AC2400]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
[add guest led to mt7621_netgear_r6700-v2.dts end edit commit message]
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2019-12-27 18:05:06 +00:00
|
|
|
SERCOMM_HWNAME := R6950
|
|
|
|
SERCOMM_HWID := BZV
|
|
|
|
SERCOMM_HWVER := A001
|
|
|
|
SERCOMM_SWVER := 0x1032
|
|
|
|
IMAGE_SIZE := 40960k
|
|
|
|
DEVICE_PACKAGES += kmod-mt7615e
|
|
|
|
endef
|
|
|
|
TARGET_DEVICES += netgear_r6700-v2
|
|
|
|
|
2019-12-11 20:54:24 +00:00
|
|
|
define Device/netgear_r6800
|
|
|
|
$(Device/netgear_sercomm_nand)
|
|
|
|
DEVICE_MODEL := R6800
|
|
|
|
SERCOMM_HWNAME := R6950
|
|
|
|
SERCOMM_HWID := BZV
|
|
|
|
SERCOMM_HWVER := A001
|
|
|
|
SERCOMM_SWVER := 0x0062
|
|
|
|
IMAGE_SIZE := 40960k
|
|
|
|
DEVICE_PACKAGES += kmod-mt7615e
|
|
|
|
endef
|
|
|
|
TARGET_DEVICES += netgear_r6800
|
|
|
|
|
2019-08-29 08:08:38 +00:00
|
|
|
define Device/netgear_r6850
|
2019-10-21 12:43:21 +00:00
|
|
|
$(Device/netgear_sercomm_nand)
|
2019-08-29 08:08:38 +00:00
|
|
|
DEVICE_MODEL := R6850
|
2019-10-21 12:43:21 +00:00
|
|
|
SERCOMM_HWNAME := R6850
|
|
|
|
SERCOMM_HWID := CHJ
|
|
|
|
SERCOMM_HWVER := A001
|
|
|
|
SERCOMM_SWVER := 0x0052
|
|
|
|
IMAGE_SIZE := 40960k
|
|
|
|
DEVICE_PACKAGES += kmod-mt7615e
|
2019-08-29 08:08:38 +00:00
|
|
|
endef
|
|
|
|
TARGET_DEVICES += netgear_r6850
|
|
|
|
|
2019-07-07 14:27:51 +00:00
|
|
|
define Device/netgear_wndr3700-v5
|
2020-04-15 01:32:02 +00:00
|
|
|
$(Device/uimage-lzma-loader)
|
2019-07-07 14:27:51 +00:00
|
|
|
BLOCKSIZE := 64k
|
|
|
|
IMAGE_SIZE := 15232k
|
|
|
|
SERCOMM_HWID := AYB
|
|
|
|
SERCOMM_HWVER := A001
|
|
|
|
SERCOMM_SWVER := 0x1054
|
|
|
|
IMAGES += factory.img
|
2019-12-19 18:40:33 +00:00
|
|
|
IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | \
|
|
|
|
pad-rootfs
|
|
|
|
IMAGE/sysupgrade.bin := $$(IMAGE/default) | append-metadata | \
|
2020-03-10 13:58:27 +00:00
|
|
|
check-size
|
2019-12-19 18:40:33 +00:00
|
|
|
IMAGE/factory.img := pad-extra 320k | $$(IMAGE/default) | \
|
|
|
|
pad-to $$$$(BLOCKSIZE) | sercom-footer | pad-to 128 | \
|
|
|
|
zip WNDR3700v5.bin | sercom-seal
|
2019-07-07 14:27:51 +00:00
|
|
|
DEVICE_VENDOR := NETGEAR
|
|
|
|
DEVICE_MODEL := WNDR3700
|
|
|
|
DEVICE_VARIANT := v5
|
2019-12-19 18:40:33 +00:00
|
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 \
|
|
|
|
kmod-usb-ledtrig-usbport wpad-basic
|
2019-07-07 14:27:51 +00:00
|
|
|
SUPPORTED_DEVICES += wndr3700v5
|
2018-11-29 23:13:53 +00:00
|
|
|
endef
|
2019-07-07 14:27:51 +00:00
|
|
|
TARGET_DEVICES += netgear_wndr3700-v5
|
2018-11-29 23:13:53 +00:00
|
|
|
|
2019-10-08 13:21:13 +00:00
|
|
|
define Device/netis_wf2881
|
2019-07-07 14:27:51 +00:00
|
|
|
BLOCKSIZE := 128k
|
|
|
|
PAGESIZE := 2048
|
|
|
|
FILESYSTEMS := squashfs
|
2019-10-02 13:12:28 +00:00
|
|
|
KERNEL_SIZE := 4096k
|
2019-07-07 14:27:51 +00:00
|
|
|
IMAGE_SIZE := 129280k
|
|
|
|
UBINIZE_OPTS := -E 5
|
2020-02-07 11:26:05 +00:00
|
|
|
UIMAGE_NAME := WF2881_0.0.00
|
|
|
|
KERNEL_INITRAMFS := $(KERNEL_DTB) | netis-tail WF2881 | uImage lzma
|
2019-10-02 13:12:28 +00:00
|
|
|
IMAGES += factory.bin
|
|
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
|
|
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | \
|
2020-03-10 13:58:27 +00:00
|
|
|
check-size
|
2019-07-07 14:27:51 +00:00
|
|
|
DEVICE_VENDOR := NETIS
|
2019-10-08 13:21:13 +00:00
|
|
|
DEVICE_MODEL := WF2881
|
2019-07-07 14:27:51 +00:00
|
|
|
DEVICE_PACKAGES := kmod-mt76x2 kmod-usb3 kmod-usb-ledtrig-usbport wpad-basic
|
2017-07-23 19:06:44 +00:00
|
|
|
endef
|
2019-10-08 13:21:13 +00:00
|
|
|
TARGET_DEVICES += netis_wf2881
|
2017-07-23 19:06:44 +00:00
|
|
|
|
2019-07-07 14:27:51 +00:00
|
|
|
define Device/phicomm_k2p
|
2019-07-15 12:55:02 +00:00
|
|
|
IMAGE_SIZE := 15744k
|
2019-07-07 14:27:51 +00:00
|
|
|
DEVICE_VENDOR := Phicomm
|
|
|
|
DEVICE_MODEL := K2P
|
2019-10-06 19:07:33 +00:00
|
|
|
DEVICE_ALT0_VENDOR := Phicomm
|
|
|
|
DEVICE_ALT0_MODEL := KE 2P
|
2019-07-07 14:27:51 +00:00
|
|
|
SUPPORTED_DEVICES += k2p
|
2019-07-03 13:39:03 +00:00
|
|
|
DEVICE_PACKAGES := kmod-mt7615e wpad-basic
|
2016-11-19 17:27:22 +00:00
|
|
|
endef
|
2019-07-07 14:27:51 +00:00
|
|
|
TARGET_DEVICES += phicomm_k2p
|
2016-11-19 17:27:22 +00:00
|
|
|
|
2019-07-07 14:27:51 +00:00
|
|
|
define Device/planex_vr500
|
2020-04-24 05:51:53 +00:00
|
|
|
$(Device/uimage-lzma-loader)
|
2019-07-15 12:55:24 +00:00
|
|
|
IMAGE_SIZE := 65216k
|
2019-07-07 14:27:51 +00:00
|
|
|
DEVICE_VENDOR := Planex
|
|
|
|
DEVICE_MODEL := VR500
|
|
|
|
DEVICE_PACKAGES := kmod-usb3
|
|
|
|
SUPPORTED_DEVICES += vr500
|
2016-04-01 07:11:48 +00:00
|
|
|
endef
|
2019-07-07 14:27:51 +00:00
|
|
|
TARGET_DEVICES += planex_vr500
|
2016-04-01 07:11:48 +00:00
|
|
|
|
2019-07-03 21:22:08 +00:00
|
|
|
define Device/samknows_whitebox-v8
|
2019-07-22 16:09:57 +00:00
|
|
|
IMAGE_SIZE := 16064k
|
2019-07-06 12:51:09 +00:00
|
|
|
DEVICE_VENDOR := SamKnows
|
|
|
|
DEVICE_MODEL := Whitebox 8
|
2019-12-19 18:40:33 +00:00
|
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 \
|
|
|
|
kmod-usb-ledtrig-usbport uboot-envtools wpad-basic
|
2019-07-03 21:22:08 +00:00
|
|
|
SUPPORTED_DEVICES += sk-wb8
|
2016-11-19 17:27:22 +00:00
|
|
|
endef
|
2019-07-03 21:22:08 +00:00
|
|
|
TARGET_DEVICES += samknows_whitebox-v8
|
2016-11-19 17:27:22 +00:00
|
|
|
|
2019-07-07 14:27:51 +00:00
|
|
|
define Device/storylink_sap-g3200u3
|
2019-07-22 16:09:57 +00:00
|
|
|
IMAGE_SIZE := 7872k
|
2019-07-07 14:27:51 +00:00
|
|
|
DEVICE_VENDOR := STORYLiNK
|
|
|
|
DEVICE_MODEL := SAP-G3200U3
|
|
|
|
DEVICE_PACKAGES := kmod-mt76x2 kmod-usb3 kmod-usb-ledtrig-usbport wpad-basic
|
|
|
|
SUPPORTED_DEVICES += sap-g3200u3
|
|
|
|
endef
|
|
|
|
TARGET_DEVICES += storylink_sap-g3200u3
|
|
|
|
|
2019-04-19 04:12:11 +00:00
|
|
|
define Device/telco-electronics_x1
|
|
|
|
IMAGE_SIZE := 16064k
|
2019-07-06 12:51:09 +00:00
|
|
|
DEVICE_VENDOR := Telco Electronics
|
|
|
|
DEVICE_MODEL := X1
|
2019-04-19 04:12:11 +00:00
|
|
|
DEVICE_PACKAGES := kmod-usb3 kmod-mt76 wpad-basic
|
|
|
|
endef
|
|
|
|
TARGET_DEVICES += telco-electronics_x1
|
|
|
|
|
2019-07-03 21:22:08 +00:00
|
|
|
define Device/thunder_timecloud
|
2020-04-18 06:19:38 +00:00
|
|
|
$(Device/uimage-lzma-loader)
|
2019-07-22 16:09:57 +00:00
|
|
|
IMAGE_SIZE := 16064k
|
2019-07-06 12:51:09 +00:00
|
|
|
DEVICE_VENDOR := Thunder
|
|
|
|
DEVICE_MODEL := Timecloud
|
2016-08-10 00:18:32 +00:00
|
|
|
DEVICE_PACKAGES := kmod-usb3
|
2019-07-03 21:22:08 +00:00
|
|
|
SUPPORTED_DEVICES += timecloud
|
2016-08-10 00:18:32 +00:00
|
|
|
endef
|
2019-07-03 21:22:08 +00:00
|
|
|
TARGET_DEVICES += thunder_timecloud
|
2016-08-10 00:18:32 +00:00
|
|
|
|
2019-07-07 14:27:51 +00:00
|
|
|
define Device/totolink_a7000r
|
|
|
|
IMAGE_SIZE := 16064k
|
|
|
|
UIMAGE_NAME := C8340R1C-9999
|
|
|
|
DEVICE_VENDOR := TOTOLINK
|
|
|
|
DEVICE_MODEL := A7000R
|
|
|
|
DEVICE_PACKAGES := kmod-mt7615e wpad-basic
|
|
|
|
endef
|
|
|
|
TARGET_DEVICES += totolink_a7000r
|
|
|
|
|
2019-08-13 06:30:29 +00:00
|
|
|
define Device/adslr_g7
|
|
|
|
IMAGE_SIZE := 16064k
|
|
|
|
DEVICE_VENDOR := ADSLR
|
|
|
|
DEVICE_MODEL := G7
|
|
|
|
DEVICE_PACKAGES := kmod-mt7615e wpad-basic
|
|
|
|
endef
|
|
|
|
TARGET_DEVICES += adslr_g7
|
|
|
|
|
ramips: add support for TP-Link RE650 v1
TP-Link RE650 v1 is a dual-band AC2600 range extender,
based on MediaTek MT7621A and MT7615E. According to the
wikidevi entry for RE650 this device is identical with
TP-Link RE500 as hardware. This patch supports only RE650.
Hardware specification:
- SoC 880 MHz - MediaTek MT7621AT
- 128 MB of DDR3 RAM
- 16 MB - Winbond 25Q128FVSG
- 4T4R 2.4 GHz - MediaTek MT7615E
- 4T4R 5 GHz - MediaTek MT7615E
- 1x 1 Gbps Ethernet - MT7621AT integrated
- 7x LEDs (Power, 2G, 5G, WPS(x2), Lan(x2))
- 4x buttons (Reset, Power, WPS, LED)
- UART header (J1) - 2:GND, 3:RX, 4:TX
Serial console @ 57600,8n1
Flash instructions:
Upload
openwrt-ramips-mt7621-tplink_re650-v1-squashfs-factory.bin
from the RE650 web interface.
TFTP recovery to stock firmware:
Unfortunately, I can't find an easy way to recover the RE
without opening the device and using modified binaries. The
TFTP upload will only work if selected from u-boot, which
means you have to open the device and attach to the serial
console. The TFTP update procedure does *not* accept the
published vendor firmware binaries. However, it allows to
flash kernel + rootfs binaries, and this works if you have
a backup of the original contents of the flash. It's probably
possible to create special image out of the vendor binaries
and use that as recovery image.
Signed-off-by: Georgi Vlaev <georgi.vlaev@gmail.com>
[re-added variables for kernel header]
Signed-off-by: David Bauer <mail@david-bauer.net>
2019-04-17 18:17:45 +00:00
|
|
|
define Device/tplink_re350-v1
|
|
|
|
$(Device/tplink-safeloader)
|
|
|
|
DEVICE_MODEL := RE350
|
|
|
|
DEVICE_VARIANT := v1
|
|
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 wpad-basic
|
|
|
|
TPLINK_BOARD_ID := RE350-V1
|
|
|
|
IMAGE_SIZE := 6016k
|
2019-07-07 14:27:51 +00:00
|
|
|
SUPPORTED_DEVICES += re350-v1
|
|
|
|
endef
|
|
|
|
TARGET_DEVICES += tplink_re350-v1
|
|
|
|
|
ramips: add support for TP-Link RE650 v1
TP-Link RE650 v1 is a dual-band AC2600 range extender,
based on MediaTek MT7621A and MT7615E. According to the
wikidevi entry for RE650 this device is identical with
TP-Link RE500 as hardware. This patch supports only RE650.
Hardware specification:
- SoC 880 MHz - MediaTek MT7621AT
- 128 MB of DDR3 RAM
- 16 MB - Winbond 25Q128FVSG
- 4T4R 2.4 GHz - MediaTek MT7615E
- 4T4R 5 GHz - MediaTek MT7615E
- 1x 1 Gbps Ethernet - MT7621AT integrated
- 7x LEDs (Power, 2G, 5G, WPS(x2), Lan(x2))
- 4x buttons (Reset, Power, WPS, LED)
- UART header (J1) - 2:GND, 3:RX, 4:TX
Serial console @ 57600,8n1
Flash instructions:
Upload
openwrt-ramips-mt7621-tplink_re650-v1-squashfs-factory.bin
from the RE650 web interface.
TFTP recovery to stock firmware:
Unfortunately, I can't find an easy way to recover the RE
without opening the device and using modified binaries. The
TFTP upload will only work if selected from u-boot, which
means you have to open the device and attach to the serial
console. The TFTP update procedure does *not* accept the
published vendor firmware binaries. However, it allows to
flash kernel + rootfs binaries, and this works if you have
a backup of the original contents of the flash. It's probably
possible to create special image out of the vendor binaries
and use that as recovery image.
Signed-off-by: Georgi Vlaev <georgi.vlaev@gmail.com>
[re-added variables for kernel header]
Signed-off-by: David Bauer <mail@david-bauer.net>
2019-04-17 18:17:45 +00:00
|
|
|
define Device/tplink_re650-v1
|
|
|
|
$(Device/tplink-safeloader)
|
|
|
|
DEVICE_MODEL := RE650
|
|
|
|
DEVICE_VARIANT := v1
|
|
|
|
DEVICE_PACKAGES := kmod-mt7615e wpad-basic
|
|
|
|
TPLINK_BOARD_ID := RE650-V1
|
|
|
|
IMAGE_SIZE := 14208k
|
|
|
|
endef
|
|
|
|
TARGET_DEVICES += tplink_re650-v1
|
|
|
|
|
2020-04-07 08:47:18 +00:00
|
|
|
define Device/ubnt_edgerouter_common
|
2020-04-15 01:32:02 +00:00
|
|
|
$(Device/uimage-lzma-loader)
|
2020-04-07 08:47:18 +00:00
|
|
|
DEVICE_VENDOR := Ubiquiti
|
2019-07-15 12:55:24 +00:00
|
|
|
IMAGE_SIZE := 256768k
|
2016-11-19 17:27:22 +00:00
|
|
|
FILESYSTEMS := squashfs
|
|
|
|
KERNEL_SIZE := 3145728
|
2019-12-19 18:40:33 +00:00
|
|
|
KERNEL_INITRAMFS := $$(KERNEL) | \
|
|
|
|
ubnt-erx-factory-image $(KDIR)/tmp/$$(KERNEL_INITRAMFS_PREFIX)-factory.tar
|
2018-11-29 09:48:03 +00:00
|
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
2020-04-07 08:47:18 +00:00
|
|
|
endef
|
|
|
|
|
|
|
|
define Device/ubnt_edgerouter-x
|
|
|
|
$(Device/ubnt_edgerouter_common)
|
2019-07-06 12:51:09 +00:00
|
|
|
DEVICE_MODEL := EdgeRouter X
|
2020-04-07 08:47:18 +00:00
|
|
|
SUPPORTED_DEVICES += ubnt-erx ubiquiti,edgerouterx
|
2016-04-01 07:11:48 +00:00
|
|
|
endef
|
2020-04-07 08:47:18 +00:00
|
|
|
TARGET_DEVICES += ubnt_edgerouter-x
|
2016-04-01 07:11:48 +00:00
|
|
|
|
2020-04-07 08:47:18 +00:00
|
|
|
define Device/ubnt_edgerouter-x-sfp
|
|
|
|
$(Device/ubnt_edgerouter_common)
|
|
|
|
DEVICE_MODEL := EdgeRouter X SFP
|
2020-04-07 21:50:31 +00:00
|
|
|
DEVICE_PACKAGES += kmod-i2c-algo-pca kmod-gpio-pca953x kmod-sfp
|
2020-04-07 08:47:18 +00:00
|
|
|
SUPPORTED_DEVICES += ubnt-erx-sfp ubiquiti,edgerouterx-sfp
|
2017-05-29 09:24:49 +00:00
|
|
|
endef
|
2020-04-07 08:47:18 +00:00
|
|
|
TARGET_DEVICES += ubnt_edgerouter-x-sfp
|
2017-05-29 09:24:49 +00:00
|
|
|
|
2020-03-08 20:39:19 +00:00
|
|
|
define Device/ubnt_unifi-nanohd
|
|
|
|
DEVICE_VENDOR := Ubiquiti
|
|
|
|
DEVICE_MODEL := UniFi nanoHD
|
|
|
|
DEVICE_PACKAGES += kmod-mt7603 kmod-mt7615e wpad-basic
|
|
|
|
IMAGE_SIZE := 15552k
|
|
|
|
endef
|
|
|
|
TARGET_DEVICES += ubnt_unifi-nanohd
|
|
|
|
|
2019-08-16 12:05:53 +00:00
|
|
|
define Device/unielec_u7621-06-16m
|
2018-11-27 23:31:10 +00:00
|
|
|
IMAGE_SIZE := 16064k
|
2019-07-06 12:51:09 +00:00
|
|
|
DEVICE_VENDOR := UniElec
|
|
|
|
DEVICE_MODEL := U7621-06
|
2019-08-16 12:05:53 +00:00
|
|
|
DEVICE_VARIANT := 16M
|
2020-03-05 13:57:29 +00:00
|
|
|
DEVICE_PACKAGES := kmod-ata-ahci kmod-sdhci-mt7620 kmod-usb3
|
2019-08-16 12:05:53 +00:00
|
|
|
SUPPORTED_DEVICES += u7621-06-256M-16M unielec,u7621-06-256m-16m
|
2018-11-27 23:31:10 +00:00
|
|
|
endef
|
2019-10-21 15:51:29 +00:00
|
|
|
TARGET_DEVICES += unielec_u7621-06-16m
|
2018-11-27 23:31:10 +00:00
|
|
|
|
2019-08-16 12:05:53 +00:00
|
|
|
define Device/unielec_u7621-06-64m
|
2018-10-24 14:23:20 +00:00
|
|
|
IMAGE_SIZE := 65216k
|
2019-07-06 12:51:09 +00:00
|
|
|
DEVICE_VENDOR := UniElec
|
|
|
|
DEVICE_MODEL := U7621-06
|
2019-08-16 12:05:53 +00:00
|
|
|
DEVICE_VARIANT := 64M
|
2020-03-05 13:57:29 +00:00
|
|
|
DEVICE_PACKAGES := kmod-ata-ahci kmod-sdhci-mt7620 kmod-usb3
|
2019-08-16 12:05:53 +00:00
|
|
|
SUPPORTED_DEVICES += unielec,u7621-06-512m-64m
|
2018-10-24 14:23:20 +00:00
|
|
|
endef
|
2019-10-21 15:51:29 +00:00
|
|
|
TARGET_DEVICES += unielec_u7621-06-64m
|
2018-10-24 14:23:20 +00:00
|
|
|
|
2019-07-07 14:27:51 +00:00
|
|
|
define Device/wevo_11acnas
|
2019-07-22 16:09:57 +00:00
|
|
|
IMAGE_SIZE := 16064k
|
2019-10-07 12:33:51 +00:00
|
|
|
UIMAGE_NAME := 11AC-NAS-Router(0.0.0)
|
2019-07-07 14:27:51 +00:00
|
|
|
DEVICE_VENDOR := WeVO
|
|
|
|
DEVICE_MODEL := 11AC NAS Router
|
2019-12-19 18:40:33 +00:00
|
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 \
|
|
|
|
kmod-usb-ledtrig-usbport wpad-basic
|
2019-07-07 14:27:51 +00:00
|
|
|
SUPPORTED_DEVICES += 11acnas
|
2016-04-26 11:43:53 +00:00
|
|
|
endef
|
2019-07-07 14:27:51 +00:00
|
|
|
TARGET_DEVICES += wevo_11acnas
|
2016-04-01 07:11:48 +00:00
|
|
|
|
2019-07-03 21:22:08 +00:00
|
|
|
define Device/wevo_w2914ns-v2
|
2019-07-22 16:09:57 +00:00
|
|
|
IMAGE_SIZE := 16064k
|
2019-10-07 12:33:51 +00:00
|
|
|
UIMAGE_NAME := W2914NS-V2(0.0.0)
|
2019-07-06 12:51:09 +00:00
|
|
|
DEVICE_VENDOR := WeVO
|
|
|
|
DEVICE_MODEL := W2914NS
|
|
|
|
DEVICE_VARIANT := v2
|
2019-12-19 18:40:33 +00:00
|
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 \
|
|
|
|
kmod-usb-ledtrig-usbport wpad-basic
|
2019-07-03 21:22:08 +00:00
|
|
|
SUPPORTED_DEVICES += w2914nsv2
|
2016-11-15 11:37:38 +00:00
|
|
|
endef
|
2019-07-03 21:22:08 +00:00
|
|
|
TARGET_DEVICES += wevo_w2914ns-v2
|
2016-11-15 11:37:38 +00:00
|
|
|
|
2019-07-07 14:27:51 +00:00
|
|
|
define Device/xiaomi_mir3g
|
2020-04-15 01:32:02 +00:00
|
|
|
$(Device/uimage-lzma-loader)
|
2016-09-04 06:56:05 +00:00
|
|
|
BLOCKSIZE := 128k
|
2016-04-01 07:11:48 +00:00
|
|
|
PAGESIZE := 2048
|
2019-07-07 14:27:51 +00:00
|
|
|
KERNEL_SIZE := 4096k
|
2019-07-15 12:55:24 +00:00
|
|
|
IMAGE_SIZE := 124416k
|
2016-09-12 16:20:50 +00:00
|
|
|
UBINIZE_OPTS := -E 5
|
2019-07-07 14:27:51 +00:00
|
|
|
IMAGES += kernel1.bin rootfs0.bin
|
|
|
|
IMAGE/kernel1.bin := append-kernel
|
2020-03-10 13:58:27 +00:00
|
|
|
IMAGE/rootfs0.bin := append-ubi | check-size
|
2019-07-07 14:27:51 +00:00
|
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
|
|
DEVICE_VENDOR := Xiaomi
|
|
|
|
DEVICE_MODEL := Mi Router 3G
|
|
|
|
SUPPORTED_DEVICES += R3G
|
|
|
|
SUPPORTED_DEVICES += mir3g
|
2019-12-19 18:40:33 +00:00
|
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 \
|
|
|
|
kmod-usb-ledtrig-usbport wpad-basic uboot-envtools
|
2016-04-01 07:11:48 +00:00
|
|
|
endef
|
2019-07-07 14:27:51 +00:00
|
|
|
TARGET_DEVICES += xiaomi_mir3g
|
2018-05-03 15:59:27 +00:00
|
|
|
|
2019-10-25 10:18:43 +00:00
|
|
|
define Device/xiaomi_mir3g-v2
|
2020-04-15 01:32:02 +00:00
|
|
|
$(Device/uimage-lzma-loader)
|
2019-10-25 10:18:43 +00:00
|
|
|
IMAGE_SIZE := 14848k
|
|
|
|
DEVICE_VENDOR := Xiaomi
|
|
|
|
DEVICE_MODEL := Mi Router 3G
|
|
|
|
DEVICE_VARIANT := v2
|
|
|
|
DEVICE_ALT0_VENDOR := Xiaomi
|
|
|
|
DEVICE_ALT0_MODEL := Mi Router 4A
|
|
|
|
DEVICE_ALT0_VARIANT := Gigabit Edition
|
|
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 wpad-basic
|
|
|
|
endef
|
|
|
|
TARGET_DEVICES += xiaomi_mir3g-v2
|
|
|
|
|
2019-07-07 14:27:51 +00:00
|
|
|
define Device/xiaomi_mir3p
|
2020-04-15 01:32:02 +00:00
|
|
|
$(Device/uimage-lzma-loader)
|
2019-07-07 14:27:51 +00:00
|
|
|
BLOCKSIZE := 128k
|
|
|
|
PAGESIZE := 2048
|
|
|
|
KERNEL_SIZE:= 4096k
|
|
|
|
UBINIZE_OPTS := -E 5
|
2019-07-15 12:55:24 +00:00
|
|
|
IMAGE_SIZE := 255488k
|
2019-07-07 14:27:51 +00:00
|
|
|
DEVICE_VENDOR := Xiaomi
|
|
|
|
DEVICE_MODEL := Mi Router 3 Pro
|
|
|
|
IMAGES += factory.bin
|
|
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
2019-12-19 18:40:33 +00:00
|
|
|
IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \
|
2020-03-10 13:58:27 +00:00
|
|
|
check-size
|
2019-12-19 18:40:33 +00:00
|
|
|
DEVICE_PACKAGES := kmod-mt7615e kmod-usb3 kmod-usb-ledtrig-usbport \
|
|
|
|
wpad-basic uboot-envtools
|
2018-05-03 15:59:27 +00:00
|
|
|
endef
|
2019-07-07 14:27:51 +00:00
|
|
|
TARGET_DEVICES += xiaomi_mir3p
|
2016-04-01 07:11:48 +00:00
|
|
|
|
2019-09-08 01:52:07 +00:00
|
|
|
define Device/xiaoyu_xy-c5
|
|
|
|
IMAGE_SIZE := 32448k
|
|
|
|
DEVICE_VENDOR := XiaoYu
|
|
|
|
DEVICE_MODEL := XY-C5
|
2020-03-05 13:57:29 +00:00
|
|
|
DEVICE_PACKAGES := kmod-ata-ahci kmod-usb3
|
2019-09-08 01:52:07 +00:00
|
|
|
endef
|
|
|
|
TARGET_DEVICES += xiaoyu_xy-c5
|
|
|
|
|
2019-07-07 14:27:51 +00:00
|
|
|
define Device/xzwifi_creativebox-v1
|
2019-07-22 16:09:57 +00:00
|
|
|
IMAGE_SIZE := 32448k
|
2019-07-07 14:27:51 +00:00
|
|
|
DEVICE_VENDOR := CreativeBox
|
|
|
|
DEVICE_MODEL := v1
|
2020-03-05 13:57:29 +00:00
|
|
|
DEVICE_PACKAGES := kmod-ata-ahci kmod-mt7603 kmod-mt76x2 kmod-sdhci-mt7620 \
|
|
|
|
kmod-usb3
|
2016-05-10 16:17:54 +00:00
|
|
|
endef
|
2019-07-07 14:27:51 +00:00
|
|
|
TARGET_DEVICES += xzwifi_creativebox-v1
|
2016-05-10 16:17:54 +00:00
|
|
|
|
2018-03-29 10:33:02 +00:00
|
|
|
define Device/youhua_wr1200js
|
|
|
|
IMAGE_SIZE := 16064k
|
2019-07-06 12:51:09 +00:00
|
|
|
DEVICE_VENDOR := YouHua
|
|
|
|
DEVICE_MODEL := WR1200JS
|
2019-12-19 18:40:33 +00:00
|
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 \
|
|
|
|
kmod-usb-ledtrig-usbport wpad-basic
|
2018-03-29 10:33:02 +00:00
|
|
|
endef
|
|
|
|
TARGET_DEVICES += youhua_wr1200js
|
|
|
|
|
2019-03-11 16:21:58 +00:00
|
|
|
define Device/youku_yk-l2
|
2019-07-22 16:09:57 +00:00
|
|
|
IMAGE_SIZE := 16064k
|
2019-07-06 12:51:09 +00:00
|
|
|
DEVICE_VENDOR := Youku
|
|
|
|
DEVICE_MODEL := YK-L2
|
2019-12-19 18:40:33 +00:00
|
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 \
|
|
|
|
kmod-usb-ledtrig-usbport wpad-basic
|
2019-03-11 16:21:58 +00:00
|
|
|
endef
|
|
|
|
TARGET_DEVICES += youku_yk-l2
|
|
|
|
|
2019-07-03 21:22:08 +00:00
|
|
|
define Device/zbtlink_zbt-we1326
|
2019-07-22 16:09:57 +00:00
|
|
|
IMAGE_SIZE := 16064k
|
2019-09-26 12:44:22 +00:00
|
|
|
DEVICE_VENDOR := Zbtlink
|
2019-07-06 12:51:09 +00:00
|
|
|
DEVICE_MODEL := ZBT-WE1326
|
2019-12-19 18:40:33 +00:00
|
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 kmod-sdhci-mt7620 \
|
|
|
|
wpad-basic
|
2019-07-03 21:22:08 +00:00
|
|
|
SUPPORTED_DEVICES += zbt-we1326
|
2017-04-20 03:07:26 +00:00
|
|
|
endef
|
2019-07-03 21:22:08 +00:00
|
|
|
TARGET_DEVICES += zbtlink_zbt-we1326
|
2017-04-20 03:07:26 +00:00
|
|
|
|
2017-12-16 23:30:21 +00:00
|
|
|
define Device/zbtlink_zbt-we3526
|
2019-07-22 16:09:57 +00:00
|
|
|
IMAGE_SIZE := 16064k
|
2019-09-26 12:44:22 +00:00
|
|
|
DEVICE_VENDOR := Zbtlink
|
2019-07-06 12:51:09 +00:00
|
|
|
DEVICE_MODEL := ZBT-WE3526
|
2019-12-19 18:40:33 +00:00
|
|
|
DEVICE_PACKAGES := kmod-sdhci-mt7620 kmod-mt7603 kmod-mt76x2 kmod-usb3 \
|
|
|
|
kmod-usb-ledtrig-usbport wpad-basic
|
2017-11-07 12:17:06 +00:00
|
|
|
endef
|
2017-12-16 23:30:21 +00:00
|
|
|
TARGET_DEVICES += zbtlink_zbt-we3526
|
2017-11-07 12:17:06 +00:00
|
|
|
|
2019-07-03 21:22:08 +00:00
|
|
|
define Device/zbtlink_zbt-wg2626
|
2019-07-22 16:09:57 +00:00
|
|
|
IMAGE_SIZE := 16064k
|
2019-09-26 12:44:22 +00:00
|
|
|
DEVICE_VENDOR := Zbtlink
|
2019-07-06 12:51:09 +00:00
|
|
|
DEVICE_MODEL := ZBT-WG2626
|
2020-03-05 13:57:29 +00:00
|
|
|
DEVICE_PACKAGES := kmod-ata-ahci kmod-sdhci-mt7620 kmod-mt76x2 kmod-usb3 \
|
|
|
|
kmod-usb-ledtrig-usbport wpad-basic
|
2019-07-03 21:22:08 +00:00
|
|
|
SUPPORTED_DEVICES += zbt-wg2626
|
2016-11-18 11:46:27 +00:00
|
|
|
endef
|
2019-07-03 21:22:08 +00:00
|
|
|
TARGET_DEVICES += zbtlink_zbt-wg2626
|
2016-11-18 11:46:27 +00:00
|
|
|
|
2019-07-03 21:22:08 +00:00
|
|
|
define Device/zbtlink_zbt-wg3526-16m
|
2019-07-22 16:09:57 +00:00
|
|
|
IMAGE_SIZE := 16064k
|
2019-09-26 12:44:22 +00:00
|
|
|
DEVICE_VENDOR := Zbtlink
|
2019-07-06 12:51:09 +00:00
|
|
|
DEVICE_MODEL := ZBT-WG3526
|
|
|
|
DEVICE_VARIANT := 16M
|
2020-03-05 13:57:29 +00:00
|
|
|
DEVICE_PACKAGES := kmod-ata-ahci kmod-sdhci-mt7620 kmod-mt7603 kmod-mt76x2 \
|
|
|
|
kmod-usb3 kmod-usb-ledtrig-usbport wpad-basic
|
2019-07-03 21:22:08 +00:00
|
|
|
SUPPORTED_DEVICES += zbt-wg3526 zbt-wg3526-16M
|
2016-11-18 11:46:27 +00:00
|
|
|
endef
|
2019-07-03 21:22:08 +00:00
|
|
|
TARGET_DEVICES += zbtlink_zbt-wg3526-16m
|
2016-11-18 11:46:27 +00:00
|
|
|
|
2019-07-03 21:22:08 +00:00
|
|
|
define Device/zbtlink_zbt-wg3526-32m
|
2019-07-22 16:09:57 +00:00
|
|
|
IMAGE_SIZE := 32448k
|
2019-09-26 12:44:22 +00:00
|
|
|
DEVICE_VENDOR := Zbtlink
|
2019-07-06 12:51:09 +00:00
|
|
|
DEVICE_MODEL := ZBT-WG3526
|
|
|
|
DEVICE_VARIANT := 32M
|
2020-03-05 13:57:29 +00:00
|
|
|
DEVICE_PACKAGES := kmod-ata-ahci kmod-sdhci-mt7620 kmod-mt7603 kmod-mt76x2 \
|
|
|
|
kmod-usb3 kmod-usb-ledtrig-usbport wpad-basic
|
2019-07-03 21:22:08 +00:00
|
|
|
SUPPORTED_DEVICES += ac1200pro zbt-wg3526-32M
|
2017-04-01 08:46:44 +00:00
|
|
|
endef
|
2019-07-03 21:22:08 +00:00
|
|
|
TARGET_DEVICES += zbtlink_zbt-wg3526-32m
|
2019-11-11 16:26:44 +00:00
|
|
|
|
|
|
|
define Device/zio_freezio
|
|
|
|
IMAGE_SIZE := 16064k
|
|
|
|
DEVICE_VENDOR := ZIO
|
|
|
|
DEVICE_MODEL := FREEZIO
|
2019-12-19 18:40:33 +00:00
|
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 \
|
|
|
|
kmod-usb-ledtrig-usbport wpad-basic
|
2019-11-11 16:26:44 +00:00
|
|
|
endef
|
|
|
|
TARGET_DEVICES += zio_freezio
|