openwrt/target/linux/ramips/dts/RP-N53.dts

179 lines
2.6 KiB
Plaintext
Raw Normal View History

/dts-v1/;
#include "mt7620a.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "asus,rp-n53", "ralink,mt7620a-soc";
model = "Asus RP-N53";
gpio-keys-polled {
compatible = "gpio-keys-polled";
poll-interval = <20>;
touch {
label = "touch";
gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
};
wps {
label = "wps";
gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
};
reset {
label = "reset";
gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
};
audio {
label = "audio";
gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
linux,code = <BTN_1>;
};
};
gpio-leds {
compatible = "gpio-leds";
backlight {
label = "rp-n53:white:back";
gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
};
wifi0 {
label = "rp-n53:blue:5g3";
gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
};
wifi1 {
label = "rp-n53:blue:5g2";
gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
};
wifi2 {
label = "rp-n53:blue:5g1";
gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
};
wifi3 {
label = "rp-n53:blue:wifi";
gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
};
wifi4 {
label = "rp-n53:blue:2g1";
gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
};
wifi5 {
label = "rp-n53:blue:2g2";
gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
};
wifi6 {
label = "rp-n53:blue:2g3";
gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
};
};
};
&gpio1 {
status = "okay";
};
&i2c {
status = "okay";
};
&i2s {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pcm_i2s_pins>;
};
&spi0 {
status = "okay";
m25p80@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x50000 0x7b0000>;
};
};
};
};
&pcm {
status = "okay";
};
&gdma {
status = "okay";
};
&wmac {
ralink,mtd-eeprom = <&factory 0>;
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "mdio", "rgmii1";
ralink,function = "gpio";
};
};
};
&gsw {
mediatek,port4 = "ephy";
pinctrl-names = "default";
pinctrl-0 = <&ephy_pins>;
};
&pcie {
status = "okay";
};
&pcie0 {
wifi@0,0 {
compatible = "pci1814,5592";
reg = <0x0000 0 0 0 0>;
ralink,2ghz = <0>;
ralink,mtd-eeprom = <&factory 0x8000>;
};
};