ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-27 01:11:14 +00:00
Code Issues Actions 4 Packages Projects Releases Wiki Activity
493c1d1766
openwrt/target/linux/gemini/config-4.14

441 lines
11 KiB
Plaintext
Raw Normal View History

gemini: add 4.14 support This adds the patches to get fairly complete Gemini support using kernel v4.14. It is mainly a backport of patches from kernel v4.16 with omissions of things like graphics that require substantial changes and will be better handled once we move to the v4.16 kernel proper. On top of this are some WIP patches for USB support. Tested on Raidsonic NAS4220B and D-link DNS-313. ChangeLog v4->v5: - Fix ethernet single gmac usecase - Fix USB reset (patch from Hans) - Fix Raidsonic ethernet skew delay - Fix kernel config (bridge, squashfs, jffs2, usb) - Disable second usb port on Raidsonic board until fotg210_hcd is fixed ChangeLog v3->v4: - Make sure to use tabs rather than spaces in base-files. - Use the dns313 image tool from the firmware-utils. - Break out the addition of the v4.14 patches and the removal of the v4.4 patches to separate (big) patches. ChangeLog v2->v3: - Update the kernel config as indicated by Hauke Martens: - Regenerate again after rebasing using kernel_oldconfig dropping a few optimization settings that are now generic - Drop CFG80211 stuff (module) - Drop CIFS stuff (module) - Drop MAC80211 (module) - Drop wireless drivers (module) - Enabled OverlayFS - Added proper DNS-313 boot image generation with the special file header tool. - Disable CMA in the kernel - Enable LZMA compression of the kernel - Consequently name the nas4220b images nas4220b - Update preinit MAC detection script to handle also DNS-313 - Add board.d/03_hdparm to set the disk to spin down after 1 minute by default, if we have the hdparm tool installed ChangeLog v1->v2: - Processed config through kernel_oldconfig - Processed patches through make target/linux/{clean,refresh} V=99 Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Roman Yeryomin <roman@advem.lv>
2018-04-29 14:38:07 +00:00
CONFIG_ALIGNMENT_TRAP=y
CONFIG_AMBA_PL08X=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_ARCH_GEMINI=y
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
CONFIG_ARCH_HAS_RESET_CONTROLLER=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_HAS_SG_CHAIN=y
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
# CONFIG_ARCH_MOXART is not set
CONFIG_ARCH_MULTIPLATFORM=y
# CONFIG_ARCH_MULTI_CPU_AUTO is not set
CONFIG_ARCH_MULTI_V4=y
# CONFIG_ARCH_MULTI_V4T is not set
CONFIG_ARCH_MULTI_V4_V5=y
# CONFIG_ARCH_MULTI_V5 is not set
CONFIG_ARCH_NR_GPIO=0
CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
# CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_ARM=y
CONFIG_ARM_AMBA=y
CONFIG_ARM_APPENDED_DTB=y
# CONFIG_ARM_ATAG_DTB_COMPAT is not set
CONFIG_ARM_HAS_SG_CHAIN=y
CONFIG_ARM_L1_CACHE_SHIFT=5
CONFIG_ARM_PATCH_PHYS_VIRT=y
# CONFIG_ARM_SMMU is not set
# CONFIG_ARM_SP805_WATCHDOG is not set
CONFIG_ARM_UNWIND=y
CONFIG_ATA=y
CONFIG_ATAGS=y
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_AUTO_ZRELADDR=y
CONFIG_BINFMT_MISC=y
CONFIG_BLK_DEV_SD=y
CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_SCSI_REQUEST=y
CONFIG_BOUNCE=y
# CONFIG_BPF_SYSCALL is not set
# CONFIG_CACHE_L2X0 is not set
gemini: Break out USB to packages This creates a new kernel package for the fotg210 host controller and uses that with the gemini to shrink the kernel. The SQ201 needs the USB2 PCI package as well. The build system required me to make kernel_oldconfig beofore it would build without errors so some minor unrelated Kconfig entries are changed. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-10-18 09:30:27 +00:00
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
gemini: add 4.14 support This adds the patches to get fairly complete Gemini support using kernel v4.14. It is mainly a backport of patches from kernel v4.16 with omissions of things like graphics that require substantial changes and will be better handled once we move to the v4.16 kernel proper. On top of this are some WIP patches for USB support. Tested on Raidsonic NAS4220B and D-link DNS-313. ChangeLog v4->v5: - Fix ethernet single gmac usecase - Fix USB reset (patch from Hans) - Fix Raidsonic ethernet skew delay - Fix kernel config (bridge, squashfs, jffs2, usb) - Disable second usb port on Raidsonic board until fotg210_hcd is fixed ChangeLog v3->v4: - Make sure to use tabs rather than spaces in base-files. - Use the dns313 image tool from the firmware-utils. - Break out the addition of the v4.14 patches and the removal of the v4.4 patches to separate (big) patches. ChangeLog v2->v3: - Update the kernel config as indicated by Hauke Martens: - Regenerate again after rebasing using kernel_oldconfig dropping a few optimization settings that are now generic - Drop CFG80211 stuff (module) - Drop CIFS stuff (module) - Drop MAC80211 (module) - Drop wireless drivers (module) - Enabled OverlayFS - Added proper DNS-313 boot image generation with the special file header tool. - Disable CMA in the kernel - Enable LZMA compression of the kernel - Consequently name the nas4220b images nas4220b - Update preinit MAC detection script to handle also DNS-313 - Add board.d/03_hdparm to set the disk to spin down after 1 minute by default, if we have the hdparm tool installed ChangeLog v1->v2: - Processed config through kernel_oldconfig - Processed patches through make target/linux/{clean,refresh} V=99 Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Roman Yeryomin <roman@advem.lv>
2018-04-29 14:38:07 +00:00
CONFIG_CLKDEV_LOOKUP=y
CONFIG_CLKSRC_MMIO=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_CMDLINE="console=ttyS0,19200n8"
gemini: Break out USB to packages This creates a new kernel package for the fotg210 host controller and uses that with the gemini to shrink the kernel. The SQ201 needs the USB2 PCI package as well. The build system required me to make kernel_oldconfig beofore it would build without errors so some minor unrelated Kconfig entries are changed. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-10-18 09:30:27 +00:00
CONFIG_CMDLINE_FROM_BOOTLOADER=y
gemini: add 4.14 support This adds the patches to get fairly complete Gemini support using kernel v4.14. It is mainly a backport of patches from kernel v4.16 with omissions of things like graphics that require substantial changes and will be better handled once we move to the v4.16 kernel proper. On top of this are some WIP patches for USB support. Tested on Raidsonic NAS4220B and D-link DNS-313. ChangeLog v4->v5: - Fix ethernet single gmac usecase - Fix USB reset (patch from Hans) - Fix Raidsonic ethernet skew delay - Fix kernel config (bridge, squashfs, jffs2, usb) - Disable second usb port on Raidsonic board until fotg210_hcd is fixed ChangeLog v3->v4: - Make sure to use tabs rather than spaces in base-files. - Use the dns313 image tool from the firmware-utils. - Break out the addition of the v4.14 patches and the removal of the v4.4 patches to separate (big) patches. ChangeLog v2->v3: - Update the kernel config as indicated by Hauke Martens: - Regenerate again after rebasing using kernel_oldconfig dropping a few optimization settings that are now generic - Drop CFG80211 stuff (module) - Drop CIFS stuff (module) - Drop MAC80211 (module) - Drop wireless drivers (module) - Enabled OverlayFS - Added proper DNS-313 boot image generation with the special file header tool. - Disable CMA in the kernel - Enable LZMA compression of the kernel - Consequently name the nas4220b images nas4220b - Update preinit MAC detection script to handle also DNS-313 - Add board.d/03_hdparm to set the disk to spin down after 1 minute by default, if we have the hdparm tool installed ChangeLog v1->v2: - Processed config through kernel_oldconfig - Processed patches through make target/linux/{clean,refresh} V=99 Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Roman Yeryomin <roman@advem.lv>
2018-04-29 14:38:07 +00:00
CONFIG_COMMON_CLK=y
CONFIG_COMMON_CLK_GEMINI=y
CONFIG_COMPAT_BRK=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_COREDUMP=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_CPU_32v4=y
CONFIG_CPU_ABRT_EV4=y
# CONFIG_CPU_BPREDICT_DISABLE is not set
CONFIG_CPU_CACHE_FA=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_COPY_FA=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y
# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
CONFIG_CPU_FA526=y
# CONFIG_CPU_ICACHE_DISABLE is not set
CONFIG_CPU_NO_EFFICIENT_FFS=y
CONFIG_CPU_PABRT_LEGACY=y
CONFIG_CPU_TLB_FA=y
CONFIG_CPU_USE_DOMAINS=y
CONFIG_CRASH_CORE=y
CONFIG_CRC16=y
# CONFIG_CRC32_SARWATE is not set
CONFIG_CRC32_SLICEBY8=y
CONFIG_CRC_CCITT=y
CONFIG_CRC_ITU_T=y
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_CMAC=y
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_DRBG_HMAC=y
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_ECHAINIV=y
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_UART_8250 is not set
# CONFIG_DEBUG_USER is not set
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_DMADEVICES=y
CONFIG_DMATEST=y
CONFIG_DMA_ENGINE=y
CONFIG_DMA_ENGINE_RAID=y
CONFIG_DMA_OF=y
CONFIG_DMA_SHARED_BUFFER=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DTC=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EEPROM_93CX6=y
CONFIG_ELF_CORE=y
# CONFIG_EMBEDDED is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_EXPERT is not set
gemini: fix hard disk boot on D-Link devices Since the D-Link devices boot from hard disk we need to add the following changes to Gemini: - Supply a bootarg in the device tree so we can boot from the right partition (/dev/sda4 on DNS-313) - Disable forced command line in config so the kernel picks up the right bootargs from the device tree - Enable EXT4 in the config as this is used for rootfs else we get nowhere, we cannot load this as a module because, well, it is supposed to be loaded from the root partition (chicken and egg problem). - Enable jbd2 and mbcache (needed by ext4) Also clean out the premature attempts to dynamically modify the command line in the Image makefile: we should pass this with the device tree bootargs instead, it works much better. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Roman Yeryomin <roman@advem.lv>
2018-05-04 15:18:51 +00:00
CONFIG_EXT4_FS=y
gemini: add 4.14 support This adds the patches to get fairly complete Gemini support using kernel v4.14. It is mainly a backport of patches from kernel v4.16 with omissions of things like graphics that require substantial changes and will be better handled once we move to the v4.16 kernel proper. On top of this are some WIP patches for USB support. Tested on Raidsonic NAS4220B and D-link DNS-313. ChangeLog v4->v5: - Fix ethernet single gmac usecase - Fix USB reset (patch from Hans) - Fix Raidsonic ethernet skew delay - Fix kernel config (bridge, squashfs, jffs2, usb) - Disable second usb port on Raidsonic board until fotg210_hcd is fixed ChangeLog v3->v4: - Make sure to use tabs rather than spaces in base-files. - Use the dns313 image tool from the firmware-utils. - Break out the addition of the v4.14 patches and the removal of the v4.4 patches to separate (big) patches. ChangeLog v2->v3: - Update the kernel config as indicated by Hauke Martens: - Regenerate again after rebasing using kernel_oldconfig dropping a few optimization settings that are now generic - Drop CFG80211 stuff (module) - Drop CIFS stuff (module) - Drop MAC80211 (module) - Drop wireless drivers (module) - Enabled OverlayFS - Added proper DNS-313 boot image generation with the special file header tool. - Disable CMA in the kernel - Enable LZMA compression of the kernel - Consequently name the nas4220b images nas4220b - Update preinit MAC detection script to handle also DNS-313 - Add board.d/03_hdparm to set the disk to spin down after 1 minute by default, if we have the hdparm tool installed ChangeLog v1->v2: - Processed config through kernel_oldconfig - Processed patches through make target/linux/{clean,refresh} V=99 Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Roman Yeryomin <roman@advem.lv>
2018-04-29 14:38:07 +00:00
CONFIG_FARADAY_FTINTC010=y
CONFIG_FHANDLE=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_FIXED_PHY=y
CONFIG_FIX_EARLYCON_MEM=y
# CONFIG_FPE_FASTFPE is not set
# CONFIG_FPE_NWFPE is not set
gemini: fix hard disk boot on D-Link devices Since the D-Link devices boot from hard disk we need to add the following changes to Gemini: - Supply a bootarg in the device tree so we can boot from the right partition (/dev/sda4 on DNS-313) - Disable forced command line in config so the kernel picks up the right bootargs from the device tree - Enable EXT4 in the config as this is used for rootfs else we get nowhere, we cannot load this as a module because, well, it is supposed to be loaded from the root partition (chicken and egg problem). - Enable jbd2 and mbcache (needed by ext4) Also clean out the premature attempts to dynamically modify the command line in the Image makefile: we should pass this with the device tree bootargs instead, it works much better. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Roman Yeryomin <roman@advem.lv>
2018-05-04 15:18:51 +00:00
CONFIG_FS_MBCACHE=y
gemini: add 4.14 support This adds the patches to get fairly complete Gemini support using kernel v4.14. It is mainly a backport of patches from kernel v4.16 with omissions of things like graphics that require substantial changes and will be better handled once we move to the v4.16 kernel proper. On top of this are some WIP patches for USB support. Tested on Raidsonic NAS4220B and D-link DNS-313. ChangeLog v4->v5: - Fix ethernet single gmac usecase - Fix USB reset (patch from Hans) - Fix Raidsonic ethernet skew delay - Fix kernel config (bridge, squashfs, jffs2, usb) - Disable second usb port on Raidsonic board until fotg210_hcd is fixed ChangeLog v3->v4: - Make sure to use tabs rather than spaces in base-files. - Use the dns313 image tool from the firmware-utils. - Break out the addition of the v4.14 patches and the removal of the v4.4 patches to separate (big) patches. ChangeLog v2->v3: - Update the kernel config as indicated by Hauke Martens: - Regenerate again after rebasing using kernel_oldconfig dropping a few optimization settings that are now generic - Drop CFG80211 stuff (module) - Drop CIFS stuff (module) - Drop MAC80211 (module) - Drop wireless drivers (module) - Enabled OverlayFS - Added proper DNS-313 boot image generation with the special file header tool. - Disable CMA in the kernel - Enable LZMA compression of the kernel - Consequently name the nas4220b images nas4220b - Update preinit MAC detection script to handle also DNS-313 - Add board.d/03_hdparm to set the disk to spin down after 1 minute by default, if we have the hdparm tool installed ChangeLog v1->v2: - Processed config through kernel_oldconfig - Processed patches through make target/linux/{clean,refresh} V=99 Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Roman Yeryomin <roman@advem.lv>
2018-04-29 14:38:07 +00:00
CONFIG_FS_POSIX_ACL=y
CONFIG_FTTMR010_TIMER=y
CONFIG_FTWDT010_WATCHDOG=y
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
CONFIG_GEMINI_ETHERNET=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_GENERIC_IDLE_POLL_SETUP=y
CONFIG_GENERIC_IO=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_PINCONF=y
CONFIG_GENERIC_SCHED_CLOCK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GLOB=y
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_GPIO_FTGPIO010=y
CONFIG_GPIO_GENERIC=y
gemini: cleanup kernel config Disable video and input drivers - they are needed only for one board and can be enabled via modules if/when UI will be available. Use LED drivers from packages. Cleanup other things unnecessarily overriding defaults. Signed-off-by: Roman Yeryomin <roman@advem.lv>
2018-05-01 18:23:56 +00:00
# CONFIG_GRO_CELLS is not set
gemini: add 4.14 support This adds the patches to get fairly complete Gemini support using kernel v4.14. It is mainly a backport of patches from kernel v4.16 with omissions of things like graphics that require substantial changes and will be better handled once we move to the v4.16 kernel proper. On top of this are some WIP patches for USB support. Tested on Raidsonic NAS4220B and D-link DNS-313. ChangeLog v4->v5: - Fix ethernet single gmac usecase - Fix USB reset (patch from Hans) - Fix Raidsonic ethernet skew delay - Fix kernel config (bridge, squashfs, jffs2, usb) - Disable second usb port on Raidsonic board until fotg210_hcd is fixed ChangeLog v3->v4: - Make sure to use tabs rather than spaces in base-files. - Use the dns313 image tool from the firmware-utils. - Break out the addition of the v4.14 patches and the removal of the v4.4 patches to separate (big) patches. ChangeLog v2->v3: - Update the kernel config as indicated by Hauke Martens: - Regenerate again after rebasing using kernel_oldconfig dropping a few optimization settings that are now generic - Drop CFG80211 stuff (module) - Drop CIFS stuff (module) - Drop MAC80211 (module) - Drop wireless drivers (module) - Enabled OverlayFS - Added proper DNS-313 boot image generation with the special file header tool. - Disable CMA in the kernel - Enable LZMA compression of the kernel - Consequently name the nas4220b images nas4220b - Update preinit MAC detection script to handle also DNS-313 - Add board.d/03_hdparm to set the disk to spin down after 1 minute by default, if we have the hdparm tool installed ChangeLog v1->v2: - Processed config through kernel_oldconfig - Processed patches through make target/linux/{clean,refresh} V=99 Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Roman Yeryomin <roman@advem.lv>
2018-04-29 14:38:07 +00:00
CONFIG_HANDLE_DOMAIN_IRQ=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
# CONFIG_HAVE_ARCH_BITREVERSE is not set
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_PFN_VALID=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_HAVE_CC_STACKPROTECTOR=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_EBPF_JIT=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_HAVE_IDE=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_HAVE_NET_DSA=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_PROC_CPU=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_UID16=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HIGHMEM=y
CONFIG_HIGHPTE=y
CONFIG_HWMON=y
CONFIG_HW_CONSOLE=y
CONFIG_HZ_FIXED=0
CONFIG_I2C=y
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_GPIO=y
CONFIG_I2C_HELPER_AUTO=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_INPUT=y
CONFIG_IOMMU_HELPER=y
# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set
CONFIG_IOMMU_SUPPORT=y
CONFIG_IOSCHED_CFQ=y
CONFIG_IPC_NS=y
CONFIG_IRQCHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_IRQ_WORK=y
# CONFIG_ISDN is not set
gemini: fix hard disk boot on D-Link devices Since the D-Link devices boot from hard disk we need to add the following changes to Gemini: - Supply a bootarg in the device tree so we can boot from the right partition (/dev/sda4 on DNS-313) - Disable forced command line in config so the kernel picks up the right bootargs from the device tree - Enable EXT4 in the config as this is used for rootfs else we get nowhere, we cannot load this as a module because, well, it is supposed to be loaded from the root partition (chicken and egg problem). - Enable jbd2 and mbcache (needed by ext4) Also clean out the premature attempts to dynamically modify the command line in the Image makefile: we should pass this with the device tree bootargs instead, it works much better. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Roman Yeryomin <roman@advem.lv>
2018-05-04 15:18:51 +00:00
CONFIG_JBD2=y
gemini: add 4.14 support This adds the patches to get fairly complete Gemini support using kernel v4.14. It is mainly a backport of patches from kernel v4.16 with omissions of things like graphics that require substantial changes and will be better handled once we move to the v4.16 kernel proper. On top of this are some WIP patches for USB support. Tested on Raidsonic NAS4220B and D-link DNS-313. ChangeLog v4->v5: - Fix ethernet single gmac usecase - Fix USB reset (patch from Hans) - Fix Raidsonic ethernet skew delay - Fix kernel config (bridge, squashfs, jffs2, usb) - Disable second usb port on Raidsonic board until fotg210_hcd is fixed ChangeLog v3->v4: - Make sure to use tabs rather than spaces in base-files. - Use the dns313 image tool from the firmware-utils. - Break out the addition of the v4.14 patches and the removal of the v4.4 patches to separate (big) patches. ChangeLog v2->v3: - Update the kernel config as indicated by Hauke Martens: - Regenerate again after rebasing using kernel_oldconfig dropping a few optimization settings that are now generic - Drop CFG80211 stuff (module) - Drop CIFS stuff (module) - Drop MAC80211 (module) - Drop wireless drivers (module) - Enabled OverlayFS - Added proper DNS-313 boot image generation with the special file header tool. - Disable CMA in the kernel - Enable LZMA compression of the kernel - Consequently name the nas4220b images nas4220b - Update preinit MAC detection script to handle also DNS-313 - Add board.d/03_hdparm to set the disk to spin down after 1 minute by default, if we have the hdparm tool installed ChangeLog v1->v2: - Processed config through kernel_oldconfig - Processed patches through make target/linux/{clean,refresh} V=99 Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Roman Yeryomin <roman@advem.lv>
2018-04-29 14:38:07 +00:00
CONFIG_KALLSYMS=y
CONFIG_KERNEL_LZMA=y
# CONFIG_KERNEL_XZ is not set
CONFIG_KEXEC=y
CONFIG_KEXEC_CORE=y
# CONFIG_LDM_DEBUG is not set
CONFIG_LDM_PARTITION=y
CONFIG_LEDS_TRIGGER_DISK=y
CONFIG_LIBFDT=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_MANDATORY_FILE_LOCKING=y
CONFIG_MDIO_BITBANG=y
CONFIG_MDIO_BUS=y
CONFIG_MDIO_DEVICE=y
CONFIG_MDIO_GPIO=y
CONFIG_MFD_SYSCON=y
CONFIG_MIGHT_HAVE_PCI=y
CONFIG_MIGRATION=y
CONFIG_MODULES_USE_ELF_REL=y
# CONFIG_MODULE_UNLOAD is not set
CONFIG_MQ_IOSCHED_DEADLINE=y
CONFIG_MQ_IOSCHED_KYBER=y
CONFIG_MTD_CFI_STAA=y
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_OF_GEMINI=y
CONFIG_MULTI_IRQ_HANDLER=y
CONFIG_NAMESPACES=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_KUSER_HELPERS=y
CONFIG_NEED_PER_CPU_KM=y
CONFIG_NET_DSA=y
CONFIG_NET_NS=y
CONFIG_NET_PACKET_ENGINE=y
CONFIG_NET_SWITCHDEV=y
CONFIG_NET_VENDOR_CORTINA=y
CONFIG_NLS=y
CONFIG_NO_BOOTMEM=y
CONFIG_NO_HZ_COMMON=y
CONFIG_NO_HZ_IDLE=y
CONFIG_NVMEM=y
CONFIG_OABI_COMPAT=y
CONFIG_OF=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_ADDRESS_PCI=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_FLATTREE=y
CONFIG_OF_GPIO=y
CONFIG_OF_IRQ=y
CONFIG_OF_MDIO=y
CONFIG_OF_NET=y
CONFIG_OF_PCI=y
CONFIG_OF_PCI_IRQ=y
CONFIG_OF_RESERVED_MEM=y
CONFIG_OLD_SIGACTION=y
CONFIG_OLD_SIGSUSPEND3=y
# CONFIG_PACKET is not set
CONFIG_PAGE_OFFSET=0xC0000000
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_PANIC_TIMEOUT=0
CONFIG_PATA_FTIDE010=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_DOMAINS_GENERIC=y
CONFIG_PCI_FTPCI100=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_PHYLIB=y
CONFIG_PID_NS=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_GEMINI=y
# CONFIG_PINCTRL_SINGLE is not set
CONFIG_PM=y
CONFIG_PM_CLK=y
# CONFIG_PM_DEBUG is not set
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_GEMINI_POWEROFF=y
CONFIG_POWER_RESET_SYSCON=y
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_RCU=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_RATIONAL=y
CONFIG_RCU_CPU_STALL_TIMEOUT=21
# CONFIG_RCU_EXPERT is not set
CONFIG_RCU_NEED_SEGCBLIST=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RD_BZIP2=y
CONFIG_RD_GZIP=y
CONFIG_RD_LZ4=y
CONFIG_RD_LZMA=y
CONFIG_RD_LZO=y
CONFIG_RD_XZ=y
CONFIG_REALTEK_PHY=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_SPI=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_RELAY=y
CONFIG_RESET_CONTROLLER=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_DRV_CMOS is not set
CONFIG_RTC_DRV_FTRTC010=y
CONFIG_RTC_I2C_AND_SPI=y
CONFIG_RTC_NVMEM=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_SATA_GEMINI=y
CONFIG_SATA_PMP=y
# CONFIG_SCHED_INFO is not set
CONFIG_SCSI=y
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_PROC_FS is not set
CONFIG_SENSORS_GPIO_FAN=y
CONFIG_SENSORS_LM75=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
CONFIG_SERIAL_8250_EXAR=y
CONFIG_SERIAL_8250_FSL=y
CONFIG_SERIAL_8250_NR_UARTS=1
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_RUNTIME_UARTS=1
# CONFIG_SERIAL_AMBA_PL011 is not set
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_SERIO=y
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_SERPORT=y
CONFIG_SG_POOL=y
CONFIG_SLUB_DEBUG=y
CONFIG_SPARSE_IRQ=y
CONFIG_SPI=y
CONFIG_SPI_BITBANG=y
CONFIG_SPI_GPIO=y
CONFIG_SPI_MASTER=y
CONFIG_SPLIT_PTLOCK_CPUS=999999
CONFIG_SRCU=y
# CONFIG_STAGING is not set
# CONFIG_STRICT_KERNEL_RWX is not set
# CONFIG_STRICT_MODULE_RWX is not set
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_SWIOTLB=y
CONFIG_SWPHY=y
CONFIG_SYNC_FILE=y
# CONFIG_SYN_COOKIES is not set
CONFIG_SYSFS_SYSCALL=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_TASKS_RCU=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_OF=y
CONFIG_TICK_CPU_ACCOUNTING=y
CONFIG_TIMER_OF=y
CONFIG_TIMER_PROBE=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TREE_SRCU=y
CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
CONFIG_UNINLINE_SPIN_UNLOCK=y
# CONFIG_USERIO is not set
CONFIG_USER_NS=y
CONFIG_USE_OF=y
CONFIG_UTS_NS=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
gemini: cleanup kernel config Disable video and input drivers - they are needed only for one board and can be enabled via modules if/when UI will be available. Use LED drivers from packages. Cleanup other things unnecessarily overriding defaults. Signed-off-by: Roman Yeryomin <roman@advem.lv>
2018-05-01 18:23:56 +00:00
# CONFIG_VT_HW_CONSOLE_BINDING is not set
gemini: add 4.14 support This adds the patches to get fairly complete Gemini support using kernel v4.14. It is mainly a backport of patches from kernel v4.16 with omissions of things like graphics that require substantial changes and will be better handled once we move to the v4.16 kernel proper. On top of this are some WIP patches for USB support. Tested on Raidsonic NAS4220B and D-link DNS-313. ChangeLog v4->v5: - Fix ethernet single gmac usecase - Fix USB reset (patch from Hans) - Fix Raidsonic ethernet skew delay - Fix kernel config (bridge, squashfs, jffs2, usb) - Disable second usb port on Raidsonic board until fotg210_hcd is fixed ChangeLog v3->v4: - Make sure to use tabs rather than spaces in base-files. - Use the dns313 image tool from the firmware-utils. - Break out the addition of the v4.14 patches and the removal of the v4.4 patches to separate (big) patches. ChangeLog v2->v3: - Update the kernel config as indicated by Hauke Martens: - Regenerate again after rebasing using kernel_oldconfig dropping a few optimization settings that are now generic - Drop CFG80211 stuff (module) - Drop CIFS stuff (module) - Drop MAC80211 (module) - Drop wireless drivers (module) - Enabled OverlayFS - Added proper DNS-313 boot image generation with the special file header tool. - Disable CMA in the kernel - Enable LZMA compression of the kernel - Consequently name the nas4220b images nas4220b - Update preinit MAC detection script to handle also DNS-313 - Add board.d/03_hdparm to set the disk to spin down after 1 minute by default, if we have the hdparm tool installed ChangeLog v1->v2: - Processed config through kernel_oldconfig - Processed patches through make target/linux/{clean,refresh} V=99 Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Roman Yeryomin <roman@advem.lv>
2018-04-29 14:38:07 +00:00
CONFIG_WATCHDOG_CORE=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_BCJ=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_X86=y
CONFIG_ZBOOT_ROM_BSS=0
CONFIG_ZBOOT_ROM_TEXT=0
CONFIG_ZLIB_INFLATE=y
Reference in New Issue Copy Permalink