openwrt/target/linux/apm821xx/base-files/etc/uci-defaults/05_fix-compat-version

. /lib/functions.sh

case "$(board_name)" in
meraki,mx60|\
netgear,wndap620|\
netgear,wndap660)
	uci set system.@system[0].compat_version="2.0"
	uci commit system
	;;
esac

exit 0
apm821xx: MX60(W): re-enable + allow bigger future kernels The MX60's kernel is limited to 0x3EFC00 by the values in mkmerakifw.c. Since the initramfs method of loading the kernel seems to be working, this patch does away with the use of the mkmerakifw tool for the MX60(W). But this will go along with a change in u-boot as well. So before you upgrade, please attach the serial cable and perform: \| setenv owrt510_boot run meraki_ubi owrt_bootargs\; run owrt_load1 owrt_bootkernel\; run owrt_load2 owrt_bootkernel \| setenv bootcmd run owrt510_boot \| saveenv Note: You won't be able to use older OpenWrt releases without switching the bootcmd back to owrt_boot! Note2: We are no longer compatible with older OpenWrt MX60 installs. the legacy BOARD_NAME and SUPPORTED_DEVICES can be dropped. This is because upgrades from older images are not possible without uboot env changes anymore. Also the bogus BLOCKSIZE value (which was set to 63k back then, in order to get the kernel properly aligned after the fdt + meraki header) can be set to the NANDs real value. The FDT size (which was needed for alignment) can now be slimmed down as well. Co-developed-by: Martin Kennedy <hurricos@gmail.com> Signed-off-by: Martin Kennedy <hurricos@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> 2021-10-01 19:53:26 +00:00			`. /lib/functions.sh`

			`case "$(board_name)" in`
apm821xx: WNDAP6X0: add missed uci-default for compat This should have been included in the previous patch that resized the kernel partition to fit bigger kernels. Fixes: 7a6a3494450c ("apm821xx: WNDAP620 + WNDAP660: reorganize partitions for 5.10") Signed-off-by: Christian Lamparter <chunkeey@gmail.com> 2021-10-20 19:04:43 +00:00			`meraki,mx60\|\`
			`netgear,wndap620\|\`
			`netgear,wndap660)`
apm821xx: MX60(W): re-enable + allow bigger future kernels The MX60's kernel is limited to 0x3EFC00 by the values in mkmerakifw.c. Since the initramfs method of loading the kernel seems to be working, this patch does away with the use of the mkmerakifw tool for the MX60(W). But this will go along with a change in u-boot as well. So before you upgrade, please attach the serial cable and perform: \| setenv owrt510_boot run meraki_ubi owrt_bootargs\; run owrt_load1 owrt_bootkernel\; run owrt_load2 owrt_bootkernel \| setenv bootcmd run owrt510_boot \| saveenv Note: You won't be able to use older OpenWrt releases without switching the bootcmd back to owrt_boot! Note2: We are no longer compatible with older OpenWrt MX60 installs. the legacy BOARD_NAME and SUPPORTED_DEVICES can be dropped. This is because upgrades from older images are not possible without uboot env changes anymore. Also the bogus BLOCKSIZE value (which was set to 63k back then, in order to get the kernel properly aligned after the fdt + meraki header) can be set to the NANDs real value. The FDT size (which was needed for alignment) can now be slimmed down as well. Co-developed-by: Martin Kennedy <hurricos@gmail.com> Signed-off-by: Martin Kennedy <hurricos@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> 2021-10-01 19:53:26 +00:00			`uci set system.@system[0].compat_version="2.0"`
			`uci commit system`
			`;;`
			`esac`

			`exit 0`