openwrt/target/linux/ipq806x/patches-5.4/0063-3-tsens-fix-kernel-5_4.patch

69 lines
1.7 KiB
Diff
Raw Normal View History

--- a/drivers/thermal/qcom/tsens-ipq8064.c
+++ b/drivers/thermal/qcom/tsens-ipq8064.c
@@ -18,6 +18,7 @@
#include <linux/regmap.h>
#include <linux/thermal.h>
#include <linux/nvmem-consumer.h>
+#include <linux/of_platform.h>
#include <linux/io.h>
#include <linux/interrupt.h>
#include "tsens.h"
@@ -320,15 +321,42 @@ static void hw_init(struct tsens_priv *p
INIT_WORK(&priv->tsens_work, tsens_scheduler_fn);
}
+static const struct regmap_config tsens_config = {
+ .name = "tm",
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = 4,
+};
+
static int init_ipq8064(struct tsens_priv *priv)
{
- int ret, i;
+ struct device *dev = priv->dev;
u32 reg_cntl, offset = 0;
+ struct resource *res;
+ resource_size_t size;
+ void __iomem *base;
+ int ret, i;
+ struct platform_device *op = of_find_device_by_node(priv->dev->of_node);
+
+ if (!op)
+ return -EINVAL;
- init_common(priv);
- if (!priv->tm_map)
- return -ENODEV;
+ /* old DTs where SROT and TM were in a contiguous 2K block */
+ priv->tm_offset = 0x1000;
+ res = platform_get_resource(op, IORESOURCE_MEM, 0);
+ size = resource_size(res);
+ base = devm_ioremap(&op->dev, res->start, size);
+ if (IS_ERR(base)) {
+ ret = PTR_ERR(base);
+ goto err_put_device;
+ }
+
+ priv->tm_map = devm_regmap_init_mmio(dev, base, &tsens_config);
+ if (IS_ERR(priv->tm_map)) {
+ ret = PTR_ERR(priv->tm_map);
+ goto err_put_device;
+ }
/*
* The status registers for each sensor are discontiguous
* because some SoCs have 5 sensors while others have more
@@ -367,6 +395,10 @@ static int init_ipq8064(struct tsens_pri
return ret;
return 0;
+
+err_put_device:
+ put_device(&op->dev);
+ return ret;
}
static int calibrate_ipq8064(struct tsens_priv *priv)