openwrt/target/linux/coldfire/patches/012-Add-vDSO-support-for-Coldfire-platform.patch

From 1ba9968246337836bf0acdbf7733a628da5c5e42 Mon Sep 17 00:00:00 2001
From: Alison Wang <b18965@freescale.com>
Date: Thu, 4 Aug 2011 09:59:42 +0800
Subject: [PATCH 12/52] Add vDSO support for Coldfire platform

This patch adds vDSO support for Coldfire platform.

Signed-off-by: Alison Wang <b18965@freescale.com>
---
 arch/m68k/coldfire/common/entry.S   |   36 ++++++++++
 arch/m68k/coldfire/vdso/Makefile    |   46 +++++++++++++
 arch/m68k/coldfire/vdso/vdso-bin.S  |   14 ++++
 arch/m68k/coldfire/vdso/vdso-lib.S  |   57 ++++++++++++++++
 arch/m68k/coldfire/vdso/vdso-note.S |   27 ++++++++
 arch/m68k/coldfire/vdso/vdso.c      |  124 +++++++++++++++++++++++++++++++++++
 arch/m68k/coldfire/vdso/vdso.lds.S  |   89 +++++++++++++++++++++++++
 arch/m68k/include/asm/auxvec.h      |    9 +++
 arch/m68k/mm/init.c                 |    3 +
 9 files changed, 405 insertions(+), 0 deletions(-)
 create mode 100644 arch/m68k/coldfire/vdso/Makefile
 create mode 100644 arch/m68k/coldfire/vdso/vdso-bin.S
 create mode 100644 arch/m68k/coldfire/vdso/vdso-lib.S
 create mode 100644 arch/m68k/coldfire/vdso/vdso-note.S
 create mode 100644 arch/m68k/coldfire/vdso/vdso.c
 create mode 100644 arch/m68k/coldfire/vdso/vdso.lds.S

--- a/arch/m68k/coldfire/common/entry.S
+++ b/arch/m68k/coldfire/common/entry.S
@@ -69,6 +69,9 @@ ENTRY(buserr)
 	movew	#0x2700,%sr		/* lock interrupts */
 #endif
 	SAVE_ALL_INT
+#ifdef CONFIG_VDSO
+	jsr	check_vdso_atomic_cmpxchg_32
+#endif
 #ifdef	CONFIG_COLDFIRE_FOO
 	movew	PT_0FF_SR(%sp),%d3		/* get original %sr */
 	oril	#0x2000,%d3		/* set supervisor mode in it */
@@ -82,6 +85,9 @@ ENTRY(buserr)
 
 ENTRY(trap)
 	SAVE_ALL_INT
+#ifdef	CONFIG_VDSO
+	jsr	check_vdso_atomic_cmpxchg_32
+#endif
 	GET_CURRENT(%d0)
 	movel   %sp,%sp@-		/* stack frame pointer argument */
 	jsr     trap_c
@@ -213,6 +219,9 @@ do_delayed_trace:
  */
 ENTRY(inthandler)
 	SAVE_ALL_INT
+#ifdef	CONFIG_VDSO
+	jsr	check_vdso_atomic_cmpxchg_32
+#endif
 	GET_CURRENT(%d0)
 	movel   %curptr@(TASK_INFO+TINFO_PREEMPT),%d0
 	addil   #0x10000,%d0
@@ -398,8 +407,35 @@ resume:
 	movew	%a1@(TASK_THREAD+THREAD_SR),%d0
 	movew	%d0,%sr
 
+#ifdef CONFIG_VDSO
+	/* save thread pointer */
+	lea	_vdso_tp,%a0
+	movel	(%a0),%a0
+	movel	%a1@(TASK_INFO+TINFO_TP_VALUE),(%a0)
+#endif
 	rts
 
+#ifdef CONFIG_VDSO
+/* if interrupted PC is between 0x5fffe40c to 0x5ffffe412 */
+/* then set PC back to 0x5fffe40c (start addr of __kernel_atomic_cmpxchg_32) */
+/* note: these absolute addresses depend on vdso-lib.S and vdso.lds.S */
+ENTRY(check_vdso_atomic_cmpxchg_32)
+	movel   %sp@(PT_OFF_PC),%d0
+	cmpil	#0x5fffe414,%d0  /* __kernel_atomic_cmpxchg_32: line 4 */
+	ble	label1
+	cmpil	#0x5fffe412,%d0	 /* __kernel_atomic_cmpxchg_32: line 3 */
+	beql	label0
+	cmpil	#0x5fffe40e,%d0  /* __kernel_atomic_cmpxchg_32: line 2 */
+	beql	label0
+	jra	label1
+label0:
+	/* __kernel_atomic_cmpxchg_32: line 1 */
+	movel	#0x5fffe40c,%d0
+	movel	%d0,%sp@(PT_OFF_PC)
+label1:
+	rts
+#endif
+
 .data
 ALIGN
 sys_call_table:
--- /dev/null
+++ b/arch/m68k/coldfire/vdso/Makefile
@@ -0,0 +1,46 @@
+#
+# Makefile for arch/m68k/coldfire/vdso with special rules
+# for building the DSO lib
+#
+# Based on arch/sh/kernel/vsyscall/Makefile
+#
+# Kurt Mahan <kmahan@freescale.com>
+#
+
+obj-y := vdso.o vdso-bin.o
+
+$(obj)/vdso-bin.o: $(obj)/vdso.lds $(obj)/vdso-lib.so
+
+#
+# The DSO Lib
+#
+
+# special linker script for building DSO images
+quiet_cmd_vdso = VDSO $@
+      cmd_vdso = $(LD) -nostdlib --eh-frame-hdr $(SYSCFLAGS_$(@F)) \
+			-T $(obj)/vdso.lds $^ -o $@
+
+vdso-flags = -shared -s -soname=linux-gate.so.1
+
+SYSCFLAGS_vdso-lib.so = $(vdso-flags)
+
+$(obj)/vdso-lib.so: $(obj)/vdso-lib.o $(obj)/vdso-note.o
+	$(call if_changed,vdso)
+
+$(obj)/vdso.lds: $(srctree)/arch/m68k/coldfire/vdso/vdso.lds.S
+	cp $< $@
+
+#
+# Create a special relocatable object that should mirror the
+# symbol table and layout of the linked DSO lib.  With ld -R
+# these symbols can be refered to in the kernel code rather
+# than as hand-coded addresses
+#
+# extra-y += vdso-syms.o
+# $(obj)/built-in.o: $(obj)/vdso-syms.o
+# $(obj)/built-in.o: ld_flags += -R (obj)/vdso-syms.o
+
+# SYSCFLAGS_vdso-syms.o = -r
+# $(obj)/vdso-syms.o: $(src)/vdso.lds \
+# 	    $(obj)/vdso-lib.o $(obj)/vdso-note.o FORCE
+# 	$(call if_changed,vdso)
--- /dev/null
+++ b/arch/m68k/coldfire/vdso/vdso-bin.S
@@ -0,0 +1,14 @@
+/*
+ * Setup vdso lib (.so) as binary image.
+ */
+
+#include <linux/init.h>
+
+__INITDATA
+
+	.globl vdso_bin_start, vdso_bin_end
+vdso_bin_start:
+	.incbin "arch/m68k/coldfire/vdso/vdso-lib.so"
+vdso_bin_end:
+
+__FINIT
--- /dev/null
+++ b/arch/m68k/coldfire/vdso/vdso-lib.S
@@ -0,0 +1,57 @@
+/*
+ * VDSO userspace code
+ *
+ * Copyright (C) 2008-2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Kurt Mahan <kmahan@freescale.com>
+ *
+ * This is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/linkage.h>
+#include <asm/unistd.h>
+
+	.text
+/*
+ * Read the thread pointer into A0 (and D0, for compatibility).
+ */
+ENTRY(__kernel_read_tp)
+	.cfi_startproc
+	lea	kuser_vdso_tp,%a0
+	movel	(%a0), %d0
+	movel	%d0,%a0
+	rts
+	.cfi_endproc
+	.size __kernel_read_tp,.-__kernel_read_tp
+
+/*
+ * Atomic compare exchange.  Can not clobber any registers
+ * other than conditional codes.
+ */
+ENTRY(__kernel_atomic_cmpxchg_32)
+	.cfi_startproc
+	cmpl	(%a0),%d0
+	bne	label0
+	movel	%d1, (%a0)
+	jmp	label1
+label0:
+	movel	(%a0),%d0
+label1:
+	rts
+	.cfi_endproc
+	.size __kernel_atomic_cmpxchg_32,.-__kernel_atomic_cmpxchg_32
+
+/*
+ * Atomic memory barrier.  Can not clobber any registers
+ * other than condition codes.
+ */
+ENTRY(__kernel_atomic_barrier)
+	.cfi_startproc
+	/* no code needed for uniprocs */
+	rts
+	.cfi_endproc
+	.size __kernel_atomic_barrier,.-__kernel_atomic_barrier
+
+	.previous
--- /dev/null
+++ b/arch/m68k/coldfire/vdso/vdso-note.S
@@ -0,0 +1,27 @@
+/*
+ * This supplies .note.* sections to go into the PT_NOTE inside the vDSO text.
+ * Here we can supply some information useful to userland.
+ *
+ * Based on arch/sh/kernel/vsyscall/vsyscall-note.S
+ */
+
+#include <linux/uts.h>
+#include <linux/version.h>
+
+#define ASM_ELF_NOTE_BEGIN(name, flags, vendor, type)			      \
+	.section name, flags;						      \
+	.balign 4;							      \
+	.long 1f - 0f;		/* name length */			      \
+	.long 3f - 2f;		/* data length */			      \
+	.long type;		/* note type */				      \
+0:	.asciz vendor;		/* vendor name */			      \
+1:	.balign 4;							      \
+2:
+
+#define ASM_ELF_NOTE_END						      \
+3:	.balign 4;		/* pad out section */			      \
+	.previous
+
+	ASM_ELF_NOTE_BEGIN(".note.kernel-version", "a", UTS_SYSNAME, 0)
+	.long LINUX_VERSION_CODE
+	ASM_ELF_NOTE_END
--- /dev/null
+++ b/arch/m68k/coldfire/vdso/vdso.c
@@ -0,0 +1,124 @@
+/*
+ * arch/m68k/coldfire/vdso/vdso.c
+ *
+ * Based on arch/sh/kernel/vsyscall/vsyscall.c
+ *
+ * Copyright (C) 2008-2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Kurt Mahan <kmahan@freescale.com>
+ *
+ * This is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/gfp.h>
+#include <linux/module.h>
+#include <linux/elf.h>
+#include <linux/sched.h>
+#include <linux/err.h>
+
+/* Mapping vDSO at the default address (what would've been returned
+ * if VDSO_MBASE was 0) makes it impossible to extend data segment
+ * (through brk()) for static binaries.  The vDSO fits into one page,
+ * so map it just before TASK_UNMAPPED_BASE.
+ */
+#define VDSO_MBASE (TASK_UNMAPPED_BASE - PAGE_SIZE)
+#define VDSO_VAR_OFFSET	4096
+
+unsigned int vdso_enabled = 1;
+EXPORT_SYMBOL_GPL(vdso_enabled);
+
+static struct page *vdso_pages[1];
+
+/* _vdso_var_start: vdso_page_start + offset_4K */
+/* it's used to save key values from kernel */
+void *_vdso_var_start;
+void *_vdso_tp;
+
+extern const char vdso_bin_start, vdso_bin_end;
+
+int __init vdso_init(void)
+{
+	void *vdso_page = (void *)get_zeroed_page(GFP_ATOMIC);
+	vdso_pages[0] = virt_to_page(vdso_page);
+
+	_vdso_var_start = (void *)(vdso_page + VDSO_VAR_OFFSET);
+	_vdso_tp = _vdso_var_start;
+
+	printk(KERN_INFO "** VDSO_INIT\n");
+
+	/* copy dso bin in */
+	memcpy(vdso_page,
+	       &vdso_bin_start, &vdso_bin_end - &vdso_bin_start);
+
+	return 0;
+}
+
+/* setup VMA at program startup for the vdso page */
+int arch_setup_additional_pages(struct linux_binprm *bprm,
+				int executable_stack)
+{
+	struct mm_struct *mm = current->mm;
+	unsigned long addr;
+	int ret;
+
+	current->mm->context.vdso = 0;
+
+	down_write(&mm->mmap_sem);
+	addr = get_unmapped_area(NULL, VDSO_MBASE, PAGE_SIZE, 0, 0);
+	if (IS_ERR_VALUE(addr)) {
+		ret = addr;
+		goto up_fail;
+	}
+
+	ret = install_special_mapping(mm, addr, PAGE_SIZE,
+				VM_READ | VM_EXEC |
+				VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC |
+				VM_ALWAYSDUMP,
+				vdso_pages);
+
+	if (unlikely(ret))
+		goto up_fail;
+
+	current->mm->context.vdso = (void *)addr;
+
+up_fail:
+#ifdef DEBUG
+	printk(KERN_DEBUG "arch_setup_additional_pages: addr: %lx; ret: %d\n",
+		addr, ret);
+#endif
+
+	up_write(&mm->mmap_sem);
+	return ret;
+}
+
+/*
+ * check vma name
+ */
+const char *arch_vma_name(struct vm_area_struct *vma)
+{
+	if (vma->vm_mm && vma->vm_start == (long)vma->vm_mm->context.vdso)
+		return "[vdso]";
+
+	return NULL;
+}
+
+struct vm_area_struct *get_gate_vma(struct task_struct *task)
+{
+	return NULL;
+}
+
+int in_gate_area(struct task_struct *task, unsigned long address)
+{
+	return 0;
+}
+
+int in_gate_area_no_task(unsigned long address)
+{
+	return 0;
+}
--- /dev/null
+++ b/arch/m68k/coldfire/vdso/vdso.lds.S
@@ -0,0 +1,89 @@
+/*
+ * Linker script for vdso DSO.  The vdso page is an ELF shared
+ * object prelinked to its virtual address, and with only one read-only
+ * segment (that fits in one page).  This script controls its layout.
+ *
+ * Based on arch/sh/kernel/vsyscall/vsyscall.lds.S
+ *
+ * Copyright (C) 2008-2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Kurt Mahan <kmahan@freescale.com>
+ *
+ * This is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+OUTPUT_FORMAT("elf32-m68k", "elf32-m68k", "elf32-m68k")
+OUTPUT_ARCH(m68k)
+
+/* The ELF entry point can be used to set the AT_SYSINFO value.  */
+ENTRY(__kernel_read_tp);
+ENTRY(__kernel_atomic_cmpxchg_32);
+ENTRY(__kernel_atomic_barrier);
+
+SECTIONS
+{
+	. = 0x5fffe000 + SIZEOF_HEADERS;
+
+	.hash		: { *(.hash) }			:text
+	.gnu.hash	: { *(.gnu.hash) }
+	.dynsym		: { *(.dynsym) }
+	.dynstr		: { *(.dynstr) }
+	.gnu.version	: { *(.gnu.version) }
+	.gnu.version_d	: { *(.gnu.version_d) }
+	.gnu.version_r	: { *(.gnu.version_r) }
+
+	/*
+	 * This linker script is used both with -r and with -shared.
+	 * For the layouts to match, we need to skip more than enough
+	 * space for the dynamic symbol table et al.  If this amount
+	 * is insufficient, ld -shared will barf.  Just increase it here.
+	 */
+	. = 0x5fffe000 + 0x400;
+
+	.text		: { *(.text) } 			:text
+	.note		: { *(.note.*) }		:text	:note
+	.eh_frame_hdr	: { *(.eh_frame_hdr ) }		:text	:eh_frame_hdr
+	.eh_frame	: {
+		KEEP (*(.eh_frame))
+		LONG (0)
+	}						:text
+	.dynamic	: { *(.dynamic) }		:text	:dynamic
+	.useless	: {
+	      *(.got.plt) *(.got)
+	      *(.data .data.* .gnu.linkonce.d.*)
+	      *(.dynbss)
+	      *(.bss .bss.* .gnu.linkonce.b.*)
+	}						:text
+
+	. = 0x5fffe000 + 0x1000;
+	kuser_vdso_tp = .;
+}
+
+/*
+ * We must supply the ELF program headers explicitly to get just one
+ * PT_LOAD segment, and set the flags explicitly to make segments read-only.
+ */
+PHDRS
+{
+	text		PT_LOAD FILEHDR PHDRS FLAGS(5);	/* PF_R|PF_X */
+	dynamic		PT_DYNAMIC FLAGS(4);		/* PF_R */
+	note		PT_NOTE FLAGS(4);		/* PF_R */
+	eh_frame_hdr	PT_GNU_EH_FRAME;
+}
+
+/*
+ * This controls what symbols we export from the DSO.
+ */
+VERSION
+{
+	LINUX_2.6 {
+	global:
+		__kernel_read_tp;
+		__kernel_atomic_cmpxchg_32;
+		__kernel_atomic_barrier;
+
+	local: *;
+	};
+}
--- a/arch/m68k/include/asm/auxvec.h
+++ b/arch/m68k/include/asm/auxvec.h
@@ -1,4 +1,13 @@
 #ifndef __ASMm68k_AUXVEC_H
 #define __ASMm68k_AUXVEC_H
+/*
+ * Architecture-neutral AT_ values in 0-17, leave some room
+ * for more of them.
+ */
+
+#ifdef CONFIG_VDSO
+/* Entry point to the vdso page */
+#define	AT_SYSINFO_EHDR		33
+#endif
 
 #endif
--- a/arch/m68k/mm/init.c
+++ b/arch/m68k/mm/init.c
@@ -39,6 +39,9 @@
 #include <asm/sections.h>
 #include <asm/tlb.h>
 
+#ifdef CONFIG_VDSO
+int vdso_init(void);
+#endif
 
 DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);