openwrt/target/linux/brcm2708/patches-4.19/950-0779-media-i2c-Add-driver-for-Sony-IMX219-sensor.patch

From 2186344c6d83ccd169e16c048c8b43aff95545e2 Mon Sep 17 00:00:00 2001
From: Dave Stevenson <dave.stevenson@raspberrypi.org>
Date: Wed, 28 Aug 2019 13:34:49 +0100
Subject: [PATCH 779/806] media: i2c: Add driver for Sony IMX219 sensor

Adds a driver for the 8MPix Sony IMX219 CSI2 sensor.
Whilst the sensor supports 2 or 4 CSI2 data lanes, this driver
currently only supports 2 lanes.
8MPix @ 15fps, 1080P @ 30fps (cropped FOV), and 1640x1232 (2x2 binned)
@ 30fps are currently supported.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
---
 drivers/media/i2c/Kconfig  |   11 +
 drivers/media/i2c/Makefile |    1 +
 drivers/media/i2c/imx219.c | 1093 ++++++++++++++++++++++++++++++++++++
 3 files changed, 1105 insertions(+)
 create mode 100644 drivers/media/i2c/imx219.c

--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -597,6 +597,17 @@ config VIDEO_APTINA_PLL
 config VIDEO_SMIAPP_PLL
 	tristate
 
+config VIDEO_IMX219
+	tristate "Sony IMX219 sensor support"
+	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+	depends on MEDIA_CAMERA_SUPPORT
+	help
+	  This is a Video4Linux2 sensor driver for the Sony
+	  IMX219 camera.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called imx219.
+
 config VIDEO_IMX258
 	tristate "Sony IMX258 sensor support"
 	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
--- a/drivers/media/i2c/Makefile
+++ b/drivers/media/i2c/Makefile
@@ -106,6 +106,7 @@ obj-$(CONFIG_VIDEO_I2C)		+= video-i2c.o
 obj-$(CONFIG_VIDEO_ML86V7667)	+= ml86v7667.o
 obj-$(CONFIG_VIDEO_OV2659)	+= ov2659.o
 obj-$(CONFIG_VIDEO_TC358743)	+= tc358743.o
+obj-$(CONFIG_VIDEO_IMX219)	+= imx219.o
 obj-$(CONFIG_VIDEO_IMX258)	+= imx258.o
 obj-$(CONFIG_VIDEO_IMX274)	+= imx274.o
 
--- /dev/null
+++ b/drivers/media/i2c/imx219.c
@@ -0,0 +1,1093 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * A V4L2 driver for Sony IMX219 cameras.
+ * Copyright (C) 2019, Raspberry Pi (Trading) Ltd
+ *
+ * Based on Sony imx258 camera driver
+ * Copyright (C) 2018 Intel Corporation
+ *
+ * DT / fwnode changes, and regulator / GPIO control taken from ov5640.c
+ * Copyright (C) 2011-2013 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2014-2017 Mentor Graphics Inc.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/pm_runtime.h>
+#include <linux/regulator/consumer.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-fwnode.h>
+#include <media/v4l2-mediabus.h>
+#include <asm/unaligned.h>
+
+#define IMX219_REG_VALUE_08BIT		1
+#define IMX219_REG_VALUE_16BIT		2
+
+#define IMX219_REG_MODE_SELECT		0x0100
+#define IMX219_MODE_STANDBY		0x00
+#define IMX219_MODE_STREAMING		0x01
+
+/* Chip ID */
+#define IMX219_REG_CHIP_ID		0x0000
+#define IMX219_CHIP_ID			0x0219
+
+/* V_TIMING internal */
+#define IMX219_REG_VTS			0x0160
+#define IMX219_VTS_15FPS		0x0dc6
+#define IMX219_VTS_30FPS_1080P		0x06e3
+#define IMX219_VTS_30FPS_BINNED		0x06e3
+#define IMX219_VTS_MAX			0xffff
+
+/*Frame Length Line*/
+#define IMX219_FLL_MIN			0x08a6
+#define IMX219_FLL_MAX			0xffff
+#define IMX219_FLL_STEP			1
+#define IMX219_FLL_DEFAULT		0x0c98
+
+/* HBLANK control - read only */
+#define IMX219_PPL_DEFAULT		5352
+
+/* Exposure control */
+#define IMX219_REG_EXPOSURE		0x015a
+#define IMX219_EXPOSURE_MIN		4
+#define IMX219_EXPOSURE_STEP		1
+#define IMX219_EXPOSURE_DEFAULT		0x640
+#define IMX219_EXPOSURE_MAX		65535
+
+/* Analog gain control */
+#define IMX219_REG_ANALOG_GAIN		0x0157
+#define IMX219_ANA_GAIN_MIN		0
+#define IMX219_ANA_GAIN_MAX		232
+#define IMX219_ANA_GAIN_STEP		1
+#define IMX219_ANA_GAIN_DEFAULT		0x0
+
+/* Digital gain control */
+#define IMX219_REG_DIGITAL_GAIN		0x0158
+#define IMX219_DGTL_GAIN_MIN		0x0100
+#define IMX219_DGTL_GAIN_MAX		0x0fff
+#define IMX219_DGTL_GAIN_DEFAULT	0x0100
+#define IMX219_DGTL_GAIN_STEP		1
+
+/* Test Pattern Control */
+#define IMX219_REG_TEST_PATTERN		0x0600
+#define IMX219_TEST_PATTERN_DISABLE	0
+#define IMX219_TEST_PATTERN_SOLID_COLOR	1
+#define IMX219_TEST_PATTERN_COLOR_BARS	2
+#define IMX219_TEST_PATTERN_GREY_COLOR	3
+#define IMX219_TEST_PATTERN_PN9		4
+
+struct imx219_reg {
+	u16 address;
+	u8 val;
+};
+
+struct imx219_reg_list {
+	u32 num_of_regs;
+	const struct imx219_reg *regs;
+};
+
+/* Mode : resolution and related config&values */
+struct imx219_mode {
+	/* Frame width */
+	u32 width;
+	/* Frame height */
+	u32 height;
+
+	/* V-timing */
+	u32 vts_def;
+
+	/* Default register values */
+	struct imx219_reg_list reg_list;
+};
+
+/*
+ * Register sets lifted off the i2C interface from the Raspberry Pi firmware
+ * driver.
+ * 3280x2464 = mode 2, 1920x1080 = mode 1, and 1640x1232 = mode 4.
+ */
+static const struct imx219_reg mode_3280x2464_regs[] = {
+	{0x0100, 0x00},
+	{0x30eb, 0x0c},
+	{0x30eb, 0x05},
+	{0x300a, 0xff},
+	{0x300b, 0xff},
+	{0x30eb, 0x05},
+	{0x30eb, 0x09},
+	{0x0114, 0x01},
+	{0x0128, 0x00},
+	{0x012a, 0x18},
+	{0x012b, 0x00},
+	{0x0164, 0x00},
+	{0x0165, 0x00},
+	{0x0166, 0x0c},
+	{0x0167, 0xcf},
+	{0x0168, 0x00},
+	{0x0169, 0x00},
+	{0x016a, 0x09},
+	{0x016b, 0x9f},
+	{0x016c, 0x0c},
+	{0x016d, 0xd0},
+	{0x016e, 0x09},
+	{0x016f, 0xa0},
+	{0x0170, 0x01},
+	{0x0171, 0x01},
+	{0x0174, 0x00},
+	{0x0175, 0x00},
+	{0x018c, 0x0a},
+	{0x018d, 0x0a},
+	{0x0301, 0x05},
+	{0x0303, 0x01},
+	{0x0304, 0x03},
+	{0x0305, 0x03},
+	{0x0306, 0x00},
+	{0x0307, 0x39},
+	{0x0309, 0x0a},
+	{0x030b, 0x01},
+	{0x030c, 0x00},
+	{0x030d, 0x72},
+	{0x0624, 0x0c},
+	{0x0625, 0xd0},
+	{0x0626, 0x09},
+	{0x0627, 0xa0},
+	{0x455e, 0x00},
+	{0x471e, 0x4b},
+	{0x4767, 0x0f},
+	{0x4750, 0x14},
+	{0x4540, 0x00},
+	{0x47b4, 0x14},
+	{0x4713, 0x30},
+	{0x478b, 0x10},
+	{0x478f, 0x10},
+	{0x4793, 0x10},
+	{0x4797, 0x0e},
+	{0x479b, 0x0e},
+
+	{0x0172, 0x03},
+	{0x0162, 0x0d},
+	{0x0163, 0x78},
+};
+
+static const struct imx219_reg mode_1920_1080_regs[] = {
+	{0x0100, 0x00},
+	{0x30eb, 0x05},
+	{0x30eb, 0x0c},
+	{0x300a, 0xff},
+	{0x300b, 0xff},
+	{0x30eb, 0x05},
+	{0x30eb, 0x09},
+	{0x0114, 0x01},
+	{0x0128, 0x00},
+	{0x012a, 0x18},
+	{0x012b, 0x00},
+	{0x0162, 0x0d},
+	{0x0163, 0x78},
+	{0x0164, 0x02},
+	{0x0165, 0xa8},
+	{0x0166, 0x0a},
+	{0x0167, 0x27},
+	{0x0168, 0x02},
+	{0x0169, 0xb4},
+	{0x016a, 0x06},
+	{0x016b, 0xeb},
+	{0x016c, 0x07},
+	{0x016d, 0x80},
+	{0x016e, 0x04},
+	{0x016f, 0x38},
+	{0x0170, 0x01},
+	{0x0171, 0x01},
+	{0x0174, 0x00},
+	{0x0175, 0x00},
+	{0x018c, 0x0a},
+	{0x018d, 0x0a},
+	{0x0301, 0x05},
+	{0x0303, 0x01},
+	{0x0304, 0x03},
+	{0x0305, 0x03},
+	{0x0306, 0x00},
+	{0x0307, 0x39},
+	{0x0309, 0x0a},
+	{0x030b, 0x01},
+	{0x030c, 0x00},
+	{0x030d, 0x72},
+	{0x455e, 0x00},
+	{0x471e, 0x4b},
+	{0x4767, 0x0f},
+	{0x4750, 0x14},
+	{0x4540, 0x00},
+	{0x47b4, 0x14},
+	{0x4713, 0x30},
+	{0x478b, 0x10},
+	{0x478f, 0x10},
+	{0x4793, 0x10},
+	{0x4797, 0x0e},
+	{0x479b, 0x0e},
+
+	{0x0172, 0x03},
+	{0x0162, 0x0d},
+	{0x0163, 0x78},
+};
+
+static const struct imx219_reg mode_1640_1232_regs[] = {
+	{0x30eb, 0x0c},
+	{0x30eb, 0x05},
+	{0x300a, 0xff},
+	{0x300b, 0xff},
+	{0x30eb, 0x05},
+	{0x30eb, 0x09},
+	{0x0114, 0x01},
+	{0x0128, 0x00},
+	{0x012a, 0x18},
+	{0x012b, 0x00},
+	{0x0164, 0x00},
+	{0x0165, 0x00},
+	{0x0166, 0x0c},
+	{0x0167, 0xcf},
+	{0x0168, 0x00},
+	{0x0169, 0x00},
+	{0x016a, 0x09},
+	{0x016b, 0x9f},
+	{0x016c, 0x06},
+	{0x016d, 0x68},
+	{0x016e, 0x04},
+	{0x016f, 0xd0},
+	{0x0170, 0x01},
+	{0x0171, 0x01},
+	{0x0174, 0x01},
+	{0x0175, 0x01},
+	{0x018c, 0x0a},
+	{0x018d, 0x0a},
+	{0x0301, 0x05},
+	{0x0303, 0x01},
+	{0x0304, 0x03},
+	{0x0305, 0x03},
+	{0x0306, 0x00},
+	{0x0307, 0x39},
+	{0x0309, 0x0a},
+	{0x030b, 0x01},
+	{0x030c, 0x00},
+	{0x030d, 0x72},
+	{0x455e, 0x00},
+	{0x471e, 0x4b},
+	{0x4767, 0x0f},
+	{0x4750, 0x14},
+	{0x4540, 0x00},
+	{0x47b4, 0x14},
+	{0x4713, 0x30},
+	{0x478b, 0x10},
+	{0x478f, 0x10},
+	{0x4793, 0x10},
+	{0x4797, 0x0e},
+	{0x479b, 0x0e},
+
+	{0x0172, 0x03},
+	{0x0162, 0x0d},
+	{0x0163, 0x78},
+};
+
+static const char * const imx219_test_pattern_menu[] = {
+	"Disabled",
+	"Color Bars",
+	"Solid Color",
+	"Grey Color Bars",
+	"PN9"
+};
+
+static const int imx219_test_pattern_val[] = {
+	IMX219_TEST_PATTERN_DISABLE,
+	IMX219_TEST_PATTERN_COLOR_BARS,
+	IMX219_TEST_PATTERN_SOLID_COLOR,
+	IMX219_TEST_PATTERN_GREY_COLOR,
+	IMX219_TEST_PATTERN_PN9,
+};
+
+/* regulator supplies */
+static const char * const imx219_supply_name[] = {
+	/* Supplies can be enabled in any order */
+	"VANA",  /* Analog (2.8V) supply */
+	"VDIG",  /* Digital Core (1.8V) supply */
+	"VDDL",  /* IF (1.2V) supply */
+};
+
+#define IMX219_NUM_SUPPLIES ARRAY_SIZE(imx219_supply_name)
+
+#define IMX219_XCLR_DELAY_MS 10	/* Initialisation delay after XCLR low->high */
+
+/* Mode configs */
+static const struct imx219_mode supported_modes[] = {
+	{
+		/* 8MPix 15fps mode */
+		.width = 3280,
+		.height = 2464,
+		.vts_def = IMX219_VTS_15FPS,
+		.reg_list = {
+			.num_of_regs = ARRAY_SIZE(mode_3280x2464_regs),
+			.regs = mode_3280x2464_regs,
+		},
+	},
+	{
+		/* 1080P 30fps cropped */
+		.width = 1920,
+		.height = 1080,
+		.vts_def = IMX219_VTS_30FPS_1080P,
+		.reg_list = {
+			.num_of_regs = ARRAY_SIZE(mode_1920_1080_regs),
+			.regs = mode_1920_1080_regs,
+		},
+	},
+	{
+		/* 2x2 binned 30fps mode */
+		.width = 1640,
+		.height = 1232,
+		.vts_def = IMX219_VTS_30FPS_BINNED,
+		.reg_list = {
+			.num_of_regs = ARRAY_SIZE(mode_1640_1232_regs),
+			.regs = mode_1640_1232_regs,
+		},
+	},
+};
+
+struct imx219 {
+	struct v4l2_subdev sd;
+	struct media_pad pad;
+
+	struct v4l2_fwnode_endpoint ep; /* the parsed DT endpoint info */
+	struct clk *xclk; /* system clock to IMX219 */
+	u32 xclk_freq;
+
+	struct gpio_desc *xclr_gpio;
+	struct regulator_bulk_data supplies[IMX219_NUM_SUPPLIES];
+
+	struct v4l2_ctrl_handler ctrl_handler;
+	/* V4L2 Controls */
+	struct v4l2_ctrl *pixel_rate;
+	struct v4l2_ctrl *exposure;
+
+	/* Current mode */
+	const struct imx219_mode *mode;
+
+	/*
+	 * Mutex for serialized access:
+	 * Protect sensor module set pad format and start/stop streaming safely.
+	 */
+	struct mutex mutex;
+
+	int power_count;
+	/* Streaming on/off */
+	bool streaming;
+};
+
+static inline struct imx219 *to_imx219(struct v4l2_subdev *_sd)
+{
+	return container_of(_sd, struct imx219, sd);
+}
+
+/* Read registers up to 2 at a time */
+static int imx219_read_reg(struct imx219 *imx219, u16 reg, u32 len, u32 *val)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&imx219->sd);
+	struct i2c_msg msgs[2];
+	u8 addr_buf[2] = { reg >> 8, reg & 0xff };
+	u8 data_buf[4] = { 0, };
+	int ret;
+
+	if (len > 4)
+		return -EINVAL;
+
+	/* Write register address */
+	msgs[0].addr = client->addr;
+	msgs[0].flags = 0;
+	msgs[0].len = ARRAY_SIZE(addr_buf);
+	msgs[0].buf = addr_buf;
+
+	/* Read data from register */
+	msgs[1].addr = client->addr;
+	msgs[1].flags = I2C_M_RD;
+	msgs[1].len = len;
+	msgs[1].buf = &data_buf[4 - len];
+
+	ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
+	if (ret != ARRAY_SIZE(msgs))
+		return -EIO;
+
+	*val = get_unaligned_be32(data_buf);
+
+	return 0;
+}
+
+/* Write registers up to 2 at a time */
+static int imx219_write_reg(struct imx219 *imx219, u16 reg, u32 len, u32 val)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&imx219->sd);
+	u8 buf[6];
+
+	if (len > 4)
+		return -EINVAL;
+
+	put_unaligned_be16(reg, buf);
+	put_unaligned_be32(val << (8 * (4 - len)), buf + 2);
+	if (i2c_master_send(client, buf, len + 2) != len + 2)
+		return -EIO;
+
+	return 0;
+}
+
+/* Write a list of registers */
+static int imx219_write_regs(struct imx219 *imx219,
+			     const struct imx219_reg *regs, u32 len)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&imx219->sd);
+	unsigned int i;
+	int ret;
+
+	for (i = 0; i < len; i++) {
+		ret = imx219_write_reg(imx219, regs[i].address, 1, regs[i].val);
+		if (ret) {
+			dev_err_ratelimited(&client->dev,
+					    "Failed to write reg 0x%4.4x. error = %d\n",
+					    regs[i].address, ret);
+
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+/* Power/clock management functions */
+static void imx219_power(struct imx219 *imx219, bool enable)
+{
+	gpiod_set_value_cansleep(imx219->xclr_gpio, enable ? 1 : 0);
+}
+
+static int imx219_set_power_on(struct imx219 *imx219)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&imx219->sd);
+	int ret;
+
+	ret = clk_prepare_enable(imx219->xclk);
+	if (ret) {
+		dev_err(&client->dev, "%s: failed to enable clock\n",
+			__func__);
+		return ret;
+	}
+
+	ret = regulator_bulk_enable(IMX219_NUM_SUPPLIES,
+				    imx219->supplies);
+	if (ret) {
+		dev_err(&client->dev, "%s: failed to enable regulators\n",
+			__func__);
+		goto xclk_off;
+	}
+
+	imx219_power(imx219, true);
+	msleep(IMX219_XCLR_DELAY_MS);
+
+	return 0;
+xclk_off:
+	clk_disable_unprepare(imx219->xclk);
+	return ret;
+}
+
+static void imx219_set_power_off(struct imx219 *imx219)
+{
+	imx219_power(imx219, false);
+	regulator_bulk_disable(IMX219_NUM_SUPPLIES, imx219->supplies);
+	clk_disable_unprepare(imx219->xclk);
+}
+
+static int imx219_set_power(struct imx219 *imx219, bool on)
+{
+	int ret = 0;
+
+	if (on) {
+		ret = imx219_set_power_on(imx219);
+		if (ret)
+			return ret;
+	} else {
+		imx219_set_power_off(imx219);
+	}
+
+	return 0;
+}
+
+/* Open sub-device */
+static int imx219_s_power(struct v4l2_subdev *sd, int on)
+{
+	struct imx219 *imx219 = to_imx219(sd);
+	int ret = 0;
+
+	mutex_lock(&imx219->mutex);
+
+	/*
+	 * If the power count is modified from 0 to != 0 or from != 0 to 0,
+	 * update the power state.
+	 */
+	if (imx219->power_count == !on) {
+		ret = imx219_set_power(imx219, !!on);
+		if (ret)
+			goto out;
+	}
+
+	/* Update the power count. */
+	imx219->power_count += on ? 1 : -1;
+	WARN_ON(imx219->power_count < 0);
+out:
+	mutex_unlock(&imx219->mutex);
+
+	return ret;
+}
+
+static int imx219_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
+{
+	struct v4l2_mbus_framefmt *try_fmt =
+		v4l2_subdev_get_try_format(sd, fh->pad, 0);
+
+	/* Initialize try_fmt */
+	try_fmt->width = supported_modes[0].width;
+	try_fmt->height = supported_modes[0].height;
+	try_fmt->code = MEDIA_BUS_FMT_SBGGR10_1X10;
+	try_fmt->field = V4L2_FIELD_NONE;
+
+	return 0;
+}
+
+static int imx219_set_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct imx219 *imx219 =
+		container_of(ctrl->handler, struct imx219, ctrl_handler);
+	struct i2c_client *client = v4l2_get_subdevdata(&imx219->sd);
+	int ret = 0;
+
+	/*
+	 * Applying V4L2 control value only happens
+	 * when power is up for streaming
+	 */
+	if (pm_runtime_get_if_in_use(&client->dev) == 0)
+		return 0;
+
+	switch (ctrl->id) {
+	case V4L2_CID_ANALOGUE_GAIN:
+		ret = imx219_write_reg(imx219, IMX219_REG_ANALOG_GAIN,
+				       IMX219_REG_VALUE_08BIT, ctrl->val);
+		break;
+	case V4L2_CID_EXPOSURE:
+		ret = imx219_write_reg(imx219, IMX219_REG_EXPOSURE,
+				       IMX219_REG_VALUE_16BIT, ctrl->val);
+		break;
+	case V4L2_CID_DIGITAL_GAIN:
+		ret = imx219_write_reg(imx219, IMX219_REG_DIGITAL_GAIN,
+				       IMX219_REG_VALUE_16BIT, ctrl->val);
+		break;
+	case V4L2_CID_TEST_PATTERN:
+		ret = imx219_write_reg(imx219, IMX219_REG_TEST_PATTERN,
+				       IMX219_REG_VALUE_16BIT,
+				       imx219_test_pattern_val[ctrl->val]);
+		break;
+	default:
+		dev_info(&client->dev,
+			 "ctrl(id:0x%x,val:0x%x) is not handled\n",
+			 ctrl->id, ctrl->val);
+		ret = -EINVAL;
+		break;
+	}
+
+	pm_runtime_put(&client->dev);
+
+	return ret;
+}
+
+static const struct v4l2_ctrl_ops imx219_ctrl_ops = {
+	.s_ctrl = imx219_set_ctrl,
+};
+
+static int imx219_enum_mbus_code(struct v4l2_subdev *sd,
+				 struct v4l2_subdev_pad_config *cfg,
+				 struct v4l2_subdev_mbus_code_enum *code)
+{
+	/* Only one bayer order(GRBG) is supported */
+	if (code->index > 0)
+		return -EINVAL;
+
+	code->code = MEDIA_BUS_FMT_SBGGR10_1X10;
+
+	return 0;
+}
+
+static int imx219_enum_frame_size(struct v4l2_subdev *sd,
+				  struct v4l2_subdev_pad_config *cfg,
+				  struct v4l2_subdev_frame_size_enum *fse)
+{
+	if (fse->index >= ARRAY_SIZE(supported_modes))
+		return -EINVAL;
+
+	if (fse->code != MEDIA_BUS_FMT_SBGGR10_1X10)
+		return -EINVAL;
+
+	fse->min_width = supported_modes[fse->index].width;
+	fse->max_width = fse->min_width;
+	fse->min_height = supported_modes[fse->index].height;
+	fse->max_height = fse->min_height;
+
+	return 0;
+}
+
+static void imx219_update_pad_format(const struct imx219_mode *mode,
+				     struct v4l2_subdev_format *fmt)
+{
+	fmt->format.width = mode->width;
+	fmt->format.height = mode->height;
+	fmt->format.code = MEDIA_BUS_FMT_SBGGR10_1X10;
+	fmt->format.field = V4L2_FIELD_NONE;
+}
+
+static int __imx219_get_pad_format(struct imx219 *imx219,
+				   struct v4l2_subdev_pad_config *cfg,
+				   struct v4l2_subdev_format *fmt)
+{
+	if (fmt->which == V4L2_SUBDEV_FORMAT_TRY)
+		fmt->format = *v4l2_subdev_get_try_format(&imx219->sd, cfg,
+							  fmt->pad);
+	else
+		imx219_update_pad_format(imx219->mode, fmt);
+
+	return 0;
+}
+
+static int imx219_get_pad_format(struct v4l2_subdev *sd,
+				 struct v4l2_subdev_pad_config *cfg,
+				 struct v4l2_subdev_format *fmt)
+{
+	struct imx219 *imx219 = to_imx219(sd);
+	int ret;
+
+	mutex_lock(&imx219->mutex);
+	ret = __imx219_get_pad_format(imx219, cfg, fmt);
+	mutex_unlock(&imx219->mutex);
+
+	return ret;
+}
+
+static int imx219_set_pad_format(struct v4l2_subdev *sd,
+				 struct v4l2_subdev_pad_config *cfg,
+				 struct v4l2_subdev_format *fmt)
+{
+	struct imx219 *imx219 = to_imx219(sd);
+	const struct imx219_mode *mode;
+	struct v4l2_mbus_framefmt *framefmt;
+
+	mutex_lock(&imx219->mutex);
+
+	/* Only one raw bayer(BGGR) order is supported */
+	fmt->format.code = MEDIA_BUS_FMT_SBGGR10_1X10;
+
+	mode = v4l2_find_nearest_size(supported_modes,
+				      ARRAY_SIZE(supported_modes),
+				      width, height,
+				      fmt->format.width, fmt->format.height);
+	imx219_update_pad_format(mode, fmt);
+	if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
+		framefmt = v4l2_subdev_get_try_format(sd, cfg, fmt->pad);
+		*framefmt = fmt->format;
+	} else {
+		imx219->mode = mode;
+	}
+
+	mutex_unlock(&imx219->mutex);
+
+	return 0;
+}
+
+/* Start streaming */
+static int imx219_start_streaming(struct imx219 *imx219)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&imx219->sd);
+	const struct imx219_reg_list *reg_list;
+	int ret;
+
+	/* Apply default values of current mode */
+	reg_list = &imx219->mode->reg_list;
+	ret = imx219_write_regs(imx219, reg_list->regs, reg_list->num_of_regs);
+	if (ret) {
+		dev_err(&client->dev, "%s failed to set mode\n", __func__);
+		return ret;
+	}
+
+	/*
+	 * Set VTS appropriately for frame rate control.
+	 * Currently fixed per mode.
+	 */
+	ret = imx219_write_reg(imx219, IMX219_REG_VTS,
+			       IMX219_REG_VALUE_16BIT, imx219->mode->vts_def);
+	if (ret)
+		return ret;
+
+	/* Apply customized values from user */
+	ret =  __v4l2_ctrl_handler_setup(imx219->sd.ctrl_handler);
+	if (ret)
+		return ret;
+
+	/* set stream on register */
+	return imx219_write_reg(imx219, IMX219_REG_MODE_SELECT,
+				IMX219_REG_VALUE_08BIT, IMX219_MODE_STREAMING);
+}
+
+/* Stop streaming */
+static int imx219_stop_streaming(struct imx219 *imx219)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&imx219->sd);
+	int ret;
+
+	/* set stream off register */
+	ret = imx219_write_reg(imx219, IMX219_REG_MODE_SELECT,
+			       IMX219_REG_VALUE_08BIT, IMX219_MODE_STANDBY);
+	if (ret)
+		dev_err(&client->dev, "%s failed to set stream\n", __func__);
+
+	/*
+	 * Return success even if it was an error, as there is nothing the
+	 * caller can do about it.
+	 */
+	return 0;
+}
+
+static int imx219_set_stream(struct v4l2_subdev *sd, int enable)
+{
+	struct imx219 *imx219 = to_imx219(sd);
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	int ret = 0;
+
+	mutex_lock(&imx219->mutex);
+	if (imx219->streaming == enable) {
+		mutex_unlock(&imx219->mutex);
+		return 0;
+	}
+
+	if (enable) {
+		ret = pm_runtime_get_sync(&client->dev);
+		if (ret < 0) {
+			pm_runtime_put_noidle(&client->dev);
+			goto err_unlock;
+		}
+
+		/*
+		 * Apply default & customized values
+		 * and then start streaming.
+		 */
+		ret = imx219_start_streaming(imx219);
+		if (ret) {
+			pm_runtime_put(&client->dev);
+			goto err_unlock;
+		}
+	} else {
+		imx219_stop_streaming(imx219);
+		pm_runtime_put(&client->dev);
+	}
+
+	imx219->streaming = enable;
+	mutex_unlock(&imx219->mutex);
+
+	return ret;
+
+err_unlock:
+	mutex_unlock(&imx219->mutex);
+
+	return ret;
+}
+
+static int __maybe_unused imx219_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct v4l2_subdev *sd = i2c_get_clientdata(client);
+	struct imx219 *imx219 = to_imx219(sd);
+
+	if (imx219->streaming)
+		imx219_stop_streaming(imx219);
+
+	return 0;
+}
+
+static int __maybe_unused imx219_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct v4l2_subdev *sd = i2c_get_clientdata(client);
+	struct imx219 *imx219 = to_imx219(sd);
+	int ret;
+
+	if (imx219->streaming) {
+		ret = imx219_start_streaming(imx219);
+		if (ret)
+			goto error;
+	}
+
+	return 0;
+
+error:
+	imx219_stop_streaming(imx219);
+	imx219->streaming = 0;
+	return ret;
+}
+
+static int imx219_get_regulators(struct imx219 *imx219)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&imx219->sd);
+	int i;
+
+	for (i = 0; i < IMX219_NUM_SUPPLIES; i++)
+		imx219->supplies[i].supply = imx219_supply_name[i];
+
+	return devm_regulator_bulk_get(&client->dev,
+				       IMX219_NUM_SUPPLIES,
+				       imx219->supplies);
+}
+
+/* Verify chip ID */
+static int imx219_identify_module(struct imx219 *imx219)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&imx219->sd);
+	int ret;
+	u32 val;
+
+	ret = imx219_set_power_on(imx219);
+	if (ret)
+		return ret;
+
+	ret = imx219_read_reg(imx219, IMX219_REG_CHIP_ID,
+			      IMX219_REG_VALUE_16BIT, &val);
+	if (ret) {
+		dev_err(&client->dev, "failed to read chip id %x\n",
+			IMX219_CHIP_ID);
+		goto power_off;
+	}
+
+	if (val != IMX219_CHIP_ID) {
+		dev_err(&client->dev, "chip id mismatch: %x!=%x\n",
+			IMX219_CHIP_ID, val);
+		ret = -EIO;
+	}
+
+power_off:
+	imx219_set_power_off(imx219);
+	return ret;
+}
+
+static const struct v4l2_subdev_core_ops imx219_core_ops = {
+	.s_power = imx219_s_power,
+};
+
+static const struct v4l2_subdev_video_ops imx219_video_ops = {
+	.s_stream = imx219_set_stream,
+};
+
+static const struct v4l2_subdev_pad_ops imx219_pad_ops = {
+	.enum_mbus_code = imx219_enum_mbus_code,
+	.get_fmt = imx219_get_pad_format,
+	.set_fmt = imx219_set_pad_format,
+	.enum_frame_size = imx219_enum_frame_size,
+};
+
+static const struct v4l2_subdev_ops imx219_subdev_ops = {
+	.core = &imx219_core_ops,
+	.video = &imx219_video_ops,
+	.pad = &imx219_pad_ops,
+};
+
+static const struct v4l2_subdev_internal_ops imx219_internal_ops = {
+	.open = imx219_open,
+};
+
+/* Initialize control handlers */
+static int imx219_init_controls(struct imx219 *imx219)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&imx219->sd);
+	struct v4l2_ctrl_handler *ctrl_hdlr;
+	int ret;
+
+	ctrl_hdlr = &imx219->ctrl_handler;
+	ret = v4l2_ctrl_handler_init(ctrl_hdlr, 8);
+	if (ret)
+		return ret;
+
+	mutex_init(&imx219->mutex);
+	ctrl_hdlr->lock = &imx219->mutex;
+
+	imx219->exposure = v4l2_ctrl_new_std(ctrl_hdlr, &imx219_ctrl_ops,
+					     V4L2_CID_EXPOSURE,
+					     IMX219_EXPOSURE_MIN,
+					     IMX219_EXPOSURE_MAX,
+					     IMX219_EXPOSURE_STEP,
+					     IMX219_EXPOSURE_DEFAULT);
+
+	v4l2_ctrl_new_std(ctrl_hdlr, &imx219_ctrl_ops, V4L2_CID_ANALOGUE_GAIN,
+			  IMX219_ANA_GAIN_MIN, IMX219_ANA_GAIN_MAX,
+			  IMX219_ANA_GAIN_STEP, IMX219_ANA_GAIN_DEFAULT);
+
+	v4l2_ctrl_new_std(ctrl_hdlr, &imx219_ctrl_ops, V4L2_CID_DIGITAL_GAIN,
+			  IMX219_DGTL_GAIN_MIN, IMX219_DGTL_GAIN_MAX,
+			  IMX219_DGTL_GAIN_STEP, IMX219_DGTL_GAIN_DEFAULT);
+
+	v4l2_ctrl_new_std_menu_items(ctrl_hdlr, &imx219_ctrl_ops,
+				     V4L2_CID_TEST_PATTERN,
+				     ARRAY_SIZE(imx219_test_pattern_menu) - 1,
+				     0, 0, imx219_test_pattern_menu);
+
+	if (ctrl_hdlr->error) {
+		ret = ctrl_hdlr->error;
+		dev_err(&client->dev, "%s control init failed (%d)\n",
+			__func__, ret);
+		goto error;
+	}
+
+	imx219->sd.ctrl_handler = ctrl_hdlr;
+
+	return 0;
+
+error:
+	v4l2_ctrl_handler_free(ctrl_hdlr);
+	mutex_destroy(&imx219->mutex);
+
+	return ret;
+}
+
+static void imx219_free_controls(struct imx219 *imx219)
+{
+	v4l2_ctrl_handler_free(imx219->sd.ctrl_handler);
+	mutex_destroy(&imx219->mutex);
+}
+
+static int imx219_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct device *dev = &client->dev;
+	struct fwnode_handle *endpoint;
+	struct imx219 *imx219;
+	int ret;
+
+	imx219 = devm_kzalloc(&client->dev, sizeof(*imx219), GFP_KERNEL);
+	if (!imx219)
+		return -ENOMEM;
+
+	/* Initialize subdev */
+	v4l2_i2c_subdev_init(&imx219->sd, client, &imx219_subdev_ops);
+
+	/* Get CSI2 bus config */
+	endpoint = fwnode_graph_get_next_endpoint(dev_fwnode(&client->dev),
+						  NULL);
+	if (!endpoint) {
+		dev_err(dev, "endpoint node not found\n");
+		return -EINVAL;
+	}
+
+	ret = v4l2_fwnode_endpoint_parse(endpoint, &imx219->ep);
+	fwnode_handle_put(endpoint);
+	if (ret) {
+		dev_err(dev, "Could not parse endpoint\n");
+		return ret;
+	}
+
+	/* Get system clock (xclk) */
+	imx219->xclk = devm_clk_get(dev, "xclk");
+	if (IS_ERR(imx219->xclk)) {
+		dev_err(dev, "failed to get xclk\n");
+		return PTR_ERR(imx219->xclk);
+	}
+
+	imx219->xclk_freq = clk_get_rate(imx219->xclk);
+	if (imx219->xclk_freq != 24000000) {
+		dev_err(dev, "xclk frequency not supported: %d Hz\n",
+			imx219->xclk_freq);
+		return -EINVAL;
+	}
+
+	ret = imx219_get_regulators(imx219);
+	if (ret)
+		return ret;
+
+	/* request optional power down pin */
+	imx219->xclr_gpio = devm_gpiod_get_optional(dev, "xclr",
+						    GPIOD_OUT_HIGH);
+
+	/* Check module identity */
+	ret = imx219_identify_module(imx219);
+	if (ret)
+		return ret;
+
+	/* Set default mode to max resolution */
+	imx219->mode = &supported_modes[0];
+
+	ret = imx219_init_controls(imx219);
+	if (ret)
+		return ret;
+
+	/* Initialize subdev */
+	imx219->sd.internal_ops = &imx219_internal_ops;
+	imx219->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+	imx219->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
+
+	/* Initialize source pad */
+	imx219->pad.flags = MEDIA_PAD_FL_SOURCE;
+
+	ret = media_entity_pads_init(&imx219->sd.entity, 1, &imx219->pad);
+	if (ret)
+		goto error_handler_free;
+
+	ret = v4l2_async_register_subdev_sensor_common(&imx219->sd);
+	if (ret < 0)
+		goto error_media_entity;
+
+	pm_runtime_set_active(&client->dev);
+	pm_runtime_enable(&client->dev);
+	pm_runtime_idle(&client->dev);
+
+	return 0;
+
+error_media_entity:
+	media_entity_cleanup(&imx219->sd.entity);
+
+error_handler_free:
+	imx219_free_controls(imx219);
+
+	return ret;
+}
+
+static int imx219_remove(struct i2c_client *client)
+{
+	struct v4l2_subdev *sd = i2c_get_clientdata(client);
+	struct imx219 *imx219 = to_imx219(sd);
+
+	v4l2_async_unregister_subdev(sd);
+	media_entity_cleanup(&sd->entity);
+	imx219_free_controls(imx219);
+
+	pm_runtime_disable(&client->dev);
+	pm_runtime_set_suspended(&client->dev);
+
+	return 0;
+}
+
+static const struct of_device_id imx219_dt_ids[] = {
+	{ .compatible = "sony,imx219" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, imx219_dt_ids);
+
+static struct i2c_driver imx219_i2c_driver = {
+	.driver = {
+		.name = "imx219",
+		.of_match_table	= imx219_dt_ids,
+	},
+	.probe = imx219_probe,
+	.remove = imx219_remove,
+};
+
+module_i2c_driver(imx219_i2c_driver);
+
+MODULE_AUTHOR("Dave Stevenson <dave.stevenson@raspberrypi.org");
+MODULE_DESCRIPTION("Sony IMX219 sensor driver");
+MODULE_LICENSE("GPL v2");