mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-27 17:18:59 +00:00
249 lines
6.3 KiB
Diff
249 lines
6.3 KiB
Diff
|
From a8af5cc2ff1e804694629a8ef320935629dd15ba Mon Sep 17 00:00:00 2001
|
||
|
From: Bert Vermeulen <bert@biot.com>
|
||
|
Date: Wed, 20 Jan 2021 14:59:28 +0100
|
||
|
Subject: spi: realtek-rtl: Add support for Realtek RTL838x/RTL839x SPI
|
||
|
controllers
|
||
|
|
||
|
This driver likely also supports earlier (RTL8196) and later (RTL93xx)
|
||
|
SoCs.
|
||
|
|
||
|
The SPI hardware in these SoCs is specifically intended for connecting NOR
|
||
|
bootflash chips, and only used for that in dozens of examined devices.
|
||
|
However boiled down to basics, it's really just a half-duplex SPI
|
||
|
controller.
|
||
|
|
||
|
The hardware appears to have a vestigial second chip-select control, but
|
||
|
it hasn't been seen in the wild and is thus not supported.
|
||
|
|
||
|
Signed-off-by: Bert Vermeulen <bert@biot.com>
|
||
|
Link: https://lore.kernel.org/r/20210120135928.246054-3-bert@biot.com
|
||
|
Signed-off-by: Mark Brown <broonie@kernel.org>
|
||
|
---
|
||
|
drivers/spi/Makefile | 1 +
|
||
|
drivers/spi/spi-realtek-rtl.c | 209 ++++++++++++++++++++++++++++++++++++++++++
|
||
|
2 files changed, 210 insertions(+)
|
||
|
create mode 100644 drivers/spi/spi-realtek-rtl.c
|
||
|
|
||
|
--- a/drivers/spi/Makefile
|
||
|
+++ b/drivers/spi/Makefile
|
||
|
@@ -94,6 +94,7 @@ obj-$(CONFIG_SPI_QCOM_QSPI) += spi-qcom
|
||
|
obj-$(CONFIG_SPI_QUP) += spi-qup.o
|
||
|
obj-$(CONFIG_SPI_ROCKCHIP) += spi-rockchip.o
|
||
|
obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o
|
||
|
+obj-$(CONFIG_MACH_REALTEK_RTL) += spi-realtek-rtl.o
|
||
|
obj-$(CONFIG_SPI_RPCIF) += spi-rpc-if.o
|
||
|
obj-$(CONFIG_SPI_RSPI) += spi-rspi.o
|
||
|
obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o
|
||
|
--- /dev/null
|
||
|
+++ b/drivers/spi/spi-realtek-rtl.c
|
||
|
@@ -0,0 +1,209 @@
|
||
|
+// SPDX-License-Identifier: GPL-2.0-only
|
||
|
+
|
||
|
+#include <linux/module.h>
|
||
|
+#include <linux/platform_device.h>
|
||
|
+#include <linux/mod_devicetable.h>
|
||
|
+#include <linux/spi/spi.h>
|
||
|
+
|
||
|
+struct rtspi {
|
||
|
+ void __iomem *base;
|
||
|
+};
|
||
|
+
|
||
|
+/* SPI Flash Configuration Register */
|
||
|
+#define RTL_SPI_SFCR 0x00
|
||
|
+#define RTL_SPI_SFCR_RBO BIT(28)
|
||
|
+#define RTL_SPI_SFCR_WBO BIT(27)
|
||
|
+
|
||
|
+/* SPI Flash Control and Status Register */
|
||
|
+#define RTL_SPI_SFCSR 0x08
|
||
|
+#define RTL_SPI_SFCSR_CSB0 BIT(31)
|
||
|
+#define RTL_SPI_SFCSR_CSB1 BIT(30)
|
||
|
+#define RTL_SPI_SFCSR_RDY BIT(27)
|
||
|
+#define RTL_SPI_SFCSR_CS BIT(24)
|
||
|
+#define RTL_SPI_SFCSR_LEN_MASK ~(0x03 << 28)
|
||
|
+#define RTL_SPI_SFCSR_LEN1 (0x00 << 28)
|
||
|
+#define RTL_SPI_SFCSR_LEN4 (0x03 << 28)
|
||
|
+
|
||
|
+/* SPI Flash Data Register */
|
||
|
+#define RTL_SPI_SFDR 0x0c
|
||
|
+
|
||
|
+#define REG(x) (rtspi->base + x)
|
||
|
+
|
||
|
+
|
||
|
+static void rt_set_cs(struct spi_device *spi, bool active)
|
||
|
+{
|
||
|
+ struct rtspi *rtspi = spi_controller_get_devdata(spi->controller);
|
||
|
+ u32 value;
|
||
|
+
|
||
|
+ /* CS0 bit is active low */
|
||
|
+ value = readl(REG(RTL_SPI_SFCSR));
|
||
|
+ if (active)
|
||
|
+ value |= RTL_SPI_SFCSR_CSB0;
|
||
|
+ else
|
||
|
+ value &= ~RTL_SPI_SFCSR_CSB0;
|
||
|
+ writel(value, REG(RTL_SPI_SFCSR));
|
||
|
+}
|
||
|
+
|
||
|
+static void set_size(struct rtspi *rtspi, int size)
|
||
|
+{
|
||
|
+ u32 value;
|
||
|
+
|
||
|
+ value = readl(REG(RTL_SPI_SFCSR));
|
||
|
+ value &= RTL_SPI_SFCSR_LEN_MASK;
|
||
|
+ if (size == 4)
|
||
|
+ value |= RTL_SPI_SFCSR_LEN4;
|
||
|
+ else if (size == 1)
|
||
|
+ value |= RTL_SPI_SFCSR_LEN1;
|
||
|
+ writel(value, REG(RTL_SPI_SFCSR));
|
||
|
+}
|
||
|
+
|
||
|
+static inline void wait_ready(struct rtspi *rtspi)
|
||
|
+{
|
||
|
+ while (!(readl(REG(RTL_SPI_SFCSR)) & RTL_SPI_SFCSR_RDY))
|
||
|
+ cpu_relax();
|
||
|
+}
|
||
|
+static void send4(struct rtspi *rtspi, const u32 *buf)
|
||
|
+{
|
||
|
+ wait_ready(rtspi);
|
||
|
+ set_size(rtspi, 4);
|
||
|
+ writel(*buf, REG(RTL_SPI_SFDR));
|
||
|
+}
|
||
|
+
|
||
|
+static void send1(struct rtspi *rtspi, const u8 *buf)
|
||
|
+{
|
||
|
+ wait_ready(rtspi);
|
||
|
+ set_size(rtspi, 1);
|
||
|
+ writel(buf[0] << 24, REG(RTL_SPI_SFDR));
|
||
|
+}
|
||
|
+
|
||
|
+static void rcv4(struct rtspi *rtspi, u32 *buf)
|
||
|
+{
|
||
|
+ wait_ready(rtspi);
|
||
|
+ set_size(rtspi, 4);
|
||
|
+ *buf = readl(REG(RTL_SPI_SFDR));
|
||
|
+}
|
||
|
+
|
||
|
+static void rcv1(struct rtspi *rtspi, u8 *buf)
|
||
|
+{
|
||
|
+ wait_ready(rtspi);
|
||
|
+ set_size(rtspi, 1);
|
||
|
+ *buf = readl(REG(RTL_SPI_SFDR)) >> 24;
|
||
|
+}
|
||
|
+
|
||
|
+static int transfer_one(struct spi_controller *ctrl, struct spi_device *spi,
|
||
|
+ struct spi_transfer *xfer)
|
||
|
+{
|
||
|
+ struct rtspi *rtspi = spi_controller_get_devdata(ctrl);
|
||
|
+ void *rx_buf;
|
||
|
+ const void *tx_buf;
|
||
|
+ int cnt;
|
||
|
+
|
||
|
+ tx_buf = xfer->tx_buf;
|
||
|
+ rx_buf = xfer->rx_buf;
|
||
|
+ cnt = xfer->len;
|
||
|
+ if (tx_buf) {
|
||
|
+ while (cnt >= 4) {
|
||
|
+ send4(rtspi, tx_buf);
|
||
|
+ tx_buf += 4;
|
||
|
+ cnt -= 4;
|
||
|
+ }
|
||
|
+ while (cnt) {
|
||
|
+ send1(rtspi, tx_buf);
|
||
|
+ tx_buf++;
|
||
|
+ cnt--;
|
||
|
+ }
|
||
|
+ } else if (rx_buf) {
|
||
|
+ while (cnt >= 4) {
|
||
|
+ rcv4(rtspi, rx_buf);
|
||
|
+ rx_buf += 4;
|
||
|
+ cnt -= 4;
|
||
|
+ }
|
||
|
+ while (cnt) {
|
||
|
+ rcv1(rtspi, rx_buf);
|
||
|
+ rx_buf++;
|
||
|
+ cnt--;
|
||
|
+ }
|
||
|
+ }
|
||
|
+
|
||
|
+ spi_finalize_current_transfer(ctrl);
|
||
|
+
|
||
|
+ return 0;
|
||
|
+}
|
||
|
+
|
||
|
+static void init_hw(struct rtspi *rtspi)
|
||
|
+{
|
||
|
+ u32 value;
|
||
|
+
|
||
|
+ /* Turn on big-endian byte ordering */
|
||
|
+ value = readl(REG(RTL_SPI_SFCR));
|
||
|
+ value |= RTL_SPI_SFCR_RBO | RTL_SPI_SFCR_WBO;
|
||
|
+ writel(value, REG(RTL_SPI_SFCR));
|
||
|
+
|
||
|
+ value = readl(REG(RTL_SPI_SFCSR));
|
||
|
+ /* Permanently disable CS1, since it's never used */
|
||
|
+ value |= RTL_SPI_SFCSR_CSB1;
|
||
|
+ /* Select CS0 for use */
|
||
|
+ value &= RTL_SPI_SFCSR_CS;
|
||
|
+ writel(value, REG(RTL_SPI_SFCSR));
|
||
|
+}
|
||
|
+
|
||
|
+static int realtek_rtl_spi_probe(struct platform_device *pdev)
|
||
|
+{
|
||
|
+ struct spi_controller *ctrl;
|
||
|
+ struct rtspi *rtspi;
|
||
|
+ int err;
|
||
|
+
|
||
|
+ ctrl = devm_spi_alloc_master(&pdev->dev, sizeof(*rtspi));
|
||
|
+ if (!ctrl) {
|
||
|
+ dev_err(&pdev->dev, "Error allocating SPI controller\n");
|
||
|
+ return -ENOMEM;
|
||
|
+ }
|
||
|
+ platform_set_drvdata(pdev, ctrl);
|
||
|
+ rtspi = spi_controller_get_devdata(ctrl);
|
||
|
+
|
||
|
+ rtspi->base = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
|
||
|
+ if (IS_ERR(rtspi->base)) {
|
||
|
+ dev_err(&pdev->dev, "Could not map SPI register address");
|
||
|
+ return -ENOMEM;
|
||
|
+ }
|
||
|
+
|
||
|
+ init_hw(rtspi);
|
||
|
+
|
||
|
+ ctrl->dev.of_node = pdev->dev.of_node;
|
||
|
+ ctrl->flags = SPI_CONTROLLER_HALF_DUPLEX;
|
||
|
+ ctrl->set_cs = rt_set_cs;
|
||
|
+ ctrl->transfer_one = transfer_one;
|
||
|
+
|
||
|
+ err = devm_spi_register_controller(&pdev->dev, ctrl);
|
||
|
+ if (err) {
|
||
|
+ dev_err(&pdev->dev, "Could not register SPI controller\n");
|
||
|
+ return -ENODEV;
|
||
|
+ }
|
||
|
+
|
||
|
+ return 0;
|
||
|
+}
|
||
|
+
|
||
|
+
|
||
|
+static const struct of_device_id realtek_rtl_spi_of_ids[] = {
|
||
|
+ { .compatible = "realtek,rtl8380-spi" },
|
||
|
+ { .compatible = "realtek,rtl8382-spi" },
|
||
|
+ { .compatible = "realtek,rtl8391-spi" },
|
||
|
+ { .compatible = "realtek,rtl8392-spi" },
|
||
|
+ { .compatible = "realtek,rtl8393-spi" },
|
||
|
+ { /* sentinel */ }
|
||
|
+};
|
||
|
+MODULE_DEVICE_TABLE(of, realtek_rtl_spi_of_ids);
|
||
|
+
|
||
|
+static struct platform_driver realtek_rtl_spi_driver = {
|
||
|
+ .probe = realtek_rtl_spi_probe,
|
||
|
+ .driver = {
|
||
|
+ .name = "realtek-rtl-spi",
|
||
|
+ .of_match_table = realtek_rtl_spi_of_ids,
|
||
|
+ },
|
||
|
+};
|
||
|
+
|
||
|
+module_platform_driver(realtek_rtl_spi_driver);
|
||
|
+
|
||
|
+MODULE_LICENSE("GPL v2");
|
||
|
+MODULE_AUTHOR("Bert Vermeulen <bert@biot.com>");
|
||
|
+MODULE_DESCRIPTION("Realtek RTL SPI driver");
|