openwrt/target/linux/ramips/dts/mt7621_buffalo_wsr-2533dhpl2.dts

71 lines
1.2 KiB
Plaintext
Raw Normal View History

ramips: add support for Buffalo WSR-2533DHPL2 Buffalo WSR-2533DHPL2 is a 2.4/5 GHz band 11ac (Wi-Fi 5) router, based on MediaTek MT7621A. Specification: - SoC : MediaTek MT7621AT - RAM : DDR3 128 MiB (Winbond W631GG6MB12J) - Flash : RAW-NAND 128 MiB (Winbond W29N01HVSINF) - WLAN : 2.4/5 GHz (2x MediaTek MT7615N) - Ethernet : 10/100/1000 Mbps x4 - Switch : MediaTek MT7530 (SoC) - LED/keys : 8x/6x (2x buttons, 1x slide-switch) - UART : through-hole on PCB (J4) - arrangement : 3.3V, GND, TX, RX from triangle-mark - settings : 57600n8 - Power : 12VDC 1.5A Flash instruction using factory.bin image: 1. boot WSR-2533DHPL2 normally with "Router" mode 2. access to the WebI ("http://192.168.11.1/") on the device and open firmware update page ("管理" -> "ファームウェア更新") 3. select the OpenWrt factory.bin image and click update ("更新実行") button Attention: do not use "factory-uboot.bin" image 4. Wait ~120 seconds to complete flashing Flash instruction using initramfs image: 1. prepare the TFTP server with the initramfs image renamed to "linux.trx-recovery" and IP address "192.168.11.2" 2. press the "AOSS" button while powering on the WSR-2533DHPL2 3. after 10 seconds, release the "AOSS" button, WSR-2533DHPL2 downloads the initramfs image and boot with it automatically 4. on the initramfs image, download the factory-uboot.bin image to the device and perform sysupgrade with it and "-F" option 5. wait ~120 seconds to complete flashing Notes: - There are 2x factory*.bin images for different purposes. - factory.bin : for flashing on OEM WebUI - factory-uboot.bin: for flashing on OEM bootloader or initramfs image factory-uboot.bin is useful for recoverying the device, or refreshing when the kernel partition is expanded in the future. sysupgrade on this device accepts factory-uboot.bin with option "-F", but on that situation, user configurations won't be kept, so it's not for normal use. MAC addresses: LAN : 18:EC:E7:xx:xx:E0 (board_data, "mac" (text)) WAN : 18:EC:E7:xx:xx:E0 (board_data, "mac" (text)) 2.4 GHz: 18:EC:E7:xx:xx:E1 (Factory, 0x4 (hex)) 5 GHz : 18:EC:E7:xx:xx:E4 (Factory, 0x8004 (hex)) Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
2024-03-30 06:33:58 +00:00
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "mt7621_buffalo_wsr-2533dhplx.dtsi"
/ {
compatible = "buffalo,wsr-2533dhpl2", "mediatek,mt7621-soc";
model = "Buffalo WSR-2533DHPL2";
chosen {
bootargs = "console=ttyS0,57600n8 ubi.block=0,rootfs root=/dev/ubiblock0_0";
};
};
&nand {
status = "okay";
mediatek,bbt;
/*
* - u-boot - (kernel (6MiB, in "firmware"))
* - Kernel2 - board_data
*/
mediatek,bmt-remap-range = <0x0 0x740000>,
<0x3e60000 0x4120000>;
};
&partitions {
partition@100000 {
label = "factory";
reg = <0x100000 0x40000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
eeprom_factory_0: eeprom@0 {
reg = <0x0 0x4da8>;
};
eeprom_factory_8000: eeprom@8000 {
reg = <0x8000 0x4da8>;
};
};
};
partition@140000 {
compatible = "brcm,trx";
brcm,trx-magic = <0x324c4850>;
label = "firmware";
reg = <0x140000 0x3d20000>;
};
partition@3e60000 {
label = "Kernel2";
reg = <0x3e60000 0x3d20000>;
};
partition@7b80000 {
label = "glbcfg";
reg = <0x7b80000 0x200000>;
read-only;
};
partition@7d80000 {
label = "board_data";
reg = <0x7d80000 0x200000>;
read-only;
};
};