openwrt/target/linux/ramips/dts/mt7620a_tplink_archer-c5-v4.dts

127 lines
2.4 KiB
Plaintext
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include <dt-bindings/leds/common.h>
#include "mt7620a_tplink_8m.dtsi"
/ {
compatible = "tplink,archer-c5-v4", "ralink,mt7620a-soc";
model = "TP-Link Archer C5 v4";
aliases {
led-boot = &led_power;
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
label-mac-device = &ethernet;
};
leds {
compatible = "gpio-leds";
led_power: led-0 {
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
};
led-1 {
function = LED_FUNCTION_WLAN_2GHZ;
color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
};
led-2 {
function = LED_FUNCTION_WLAN_5GHZ;
color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
led-3 {
function = LED_FUNCTION_WAN;
color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
};
led-4 {
function = LED_FUNCTION_WAN;
color = <LED_COLOR_ID_ORANGE>;
gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
};
led-5 {
function = LED_FUNCTION_LAN;
color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
};
led-6 {
function = LED_FUNCTION_USB;
color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
trigger-sources = <&ohci_port1>, <&ehci_port1>;
linux,default-trigger = "usbport";
};
led-7 {
function = LED_FUNCTION_WPS;
color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
};
};
rtl8367s {
compatible = "realtek,rtl8367b";
realtek,extif2 = <1 0 1 1 1 1 1 1 2>;
mii-bus = <&mdio0>;
phy-id = <29>;
};
};
&spi0 {
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
};
};
&state_default {
gpio {
groups = "i2c", "uartf", "ephy", "rgmii2";
function = "gpio";
};
};
&ethernet {
pinctrl-names = "default";
pinctrl-0 = <&rgmii1_pins &mdio_pins>;
port@5 {
status = "okay";
mediatek,fixed-link = <1000 1 1 1>;
phy-mode = "rgmii";
};
mdio0: mdio-bus {
status = "okay";
reset-gpios = <&gpio2 20 GPIO_ACTIVE_LOW>;
reset-delay-us = <10000>;
};
};
&wmac {
pinctrl-names = "default", "pa_gpio";
pinctrl-0 = <&pa_pins>;
pinctrl-1 = <&pa_gpio_pins>;
nvmem-cells = <&eeprom_radio_0>, <&macaddr_rom_f100 0>;
nvmem-cell-names = "eeprom", "mac-address";
};
&wifi {
nvmem-cells = <&eeprom_radio_8000>, <&macaddr_rom_f100 2>;
nvmem-cell-names = "eeprom", "mac-address";
};