openwrt/target/linux/ath79/dts/qca9556_avm_fritz1750e.dts

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

#include "qca9557.dtsi"

/ {
	compatible = "avm,fritz1750e", "qca,qca9557";
	model = "AVM FRITZ!WLAN Repeater 1750E";

	chosen {
		bootargs = "console=ttyS0,115200n8";
	};

	aliases {
		led-boot = &led_power;
		led-failsafe = &led_power;
		led-running = &led_power;
		led-upgrade = &led_power;
	};

	led_spi {
		compatible = "spi-gpio";
		#address-cells = <1>;
		#size-cells = <0>;

		sck-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
		mosi-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
		num-chipselects = <0>;

		spi_gpio: led_gpio@0 {
			compatible = "fairchild,74hc595";
			reg = <0>;
			gpio-controller;
			#gpio-cells = <2>;
			registers-number = <1>;
			spi-max-frequency = <10000000>;

			gpio_latch_bit {
				gpio-hog;
				gpios = <7 GPIO_ACTIVE_HIGH>;
				output-high;
				line-name = "gpio-latch-bit";
			};
		};
	};

	leds {
		compatible = "gpio-leds";

		led_power: power {
			label = "fritz1750e:green:power";
			gpios = <&spi_gpio 6 GPIO_ACTIVE_HIGH>;
		};

		wlan {
			label = "fritz1750e:green:wlan";
			gpios = <&spi_gpio 5 GPIO_ACTIVE_HIGH>;
			linux,default-trigger = "phy1tpt";
		};

		lan {
			label = "fritz1750e:green:lan";
			gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
		};

		rssi0 {
			label = "fritz1750e:green:rssi0";
			gpios = <&spi_gpio 0 GPIO_ACTIVE_HIGH>;
		};

		rssi1 {
			label = "fritz1750e:green:rssi1";
			gpios = <&spi_gpio 1 GPIO_ACTIVE_HIGH>;
		};

		rssi2 {
			label = "fritz1750e:green:rssi2";
			gpios = <&spi_gpio 2 GPIO_ACTIVE_HIGH>;
		};

		rssi3 {
			label = "fritz1750e:green:rssi3";
			gpios = <&spi_gpio 3 GPIO_ACTIVE_HIGH>;
		};

		rssi4 {
			label = "fritz1750e:green:rssi4";
			gpios = <&spi_gpio 4 GPIO_ACTIVE_HIGH>;
		};
	};

	keys {
		compatible = "gpio-keys";

		wps {
			label = "wps";
			linux,code = <KEY_WPS_BUTTON>;
			gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
		};
	};
};

&pcie0 {
	status = "okay";
};

&uart {
	status = "okay";
};

&spi {
	status = "okay";
	num-cs = <1>;

	flash@0 {
		compatible = "jedec,spi-nor";
		reg = <0>;
		spi-max-frequency = <25000000>;

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			partition@0 {
				label = "urlader";
				reg = <0x0 0x20000>;
				read-only;
			};

			partition@20000 {
				compatible = "avm,eva-firmware";
				label = "firmware";
				reg = <0x20000 0xee0000>;
			};

			partition@f00000 {
				label = "tffs (1)";
				reg = <0xf00000 0x80000>;
				read-only;
			};

			partition@f80000 {
				label = "tffs (2)";
				reg = <0xf80000 0x80000>;
				read-only;
			};
		};
	};
};

&gpio {
	reset-pcie-ep {
		gpio-hog;
		gpios = <17 GPIO_ACTIVE_HIGH>;
		output-high;
		line-name = "PCIE EP reset";
	};

	reset-pcie {
		gpio-hog;
		gpios = <18 GPIO_ACTIVE_HIGH>;
		output-high;
		line-name = "PCIE Bus reset";
	};
};

&wmac {
	status = "okay";
	qca,no-eeprom;
};

&eth1 {
	status = "okay";

	phy-handle = <&phy0>;
	pll-data = <0x3000000 0x101 0x1313>;

	gmac-config {
		device = <&gmac>;
		ge0-sgmii = <0>;
	};
};

&mdio1 {
	status = "okay";

	phy0: ethernet-phy@0 {
		reg = <0>;
		reset-gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
	};
};