openwrt/target/linux/generic/patches-3.12/771-bgmac-phylib.patch

Use phy lib for the phy. This is needed to get the switch connected to 
the phy and driven by b53 working.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

--- a/drivers/net/ethernet/broadcom/bgmac.c
+++ b/drivers/net/ethernet/broadcom/bgmac.c
@@ -1219,27 +1219,14 @@ static int bgmac_set_mac_address(struct
 static int bgmac_ioctl(struct net_device *net_dev, struct ifreq *ifr, int cmd)
 {
 	struct bgmac *bgmac = netdev_priv(net_dev);
-	struct mii_ioctl_data *data = if_mii(ifr);
 
-	switch (cmd) {
-	case SIOCGMIIPHY:
-		data->phy_id = bgmac->phyaddr;
-		/* fallthru */
-	case SIOCGMIIREG:
-		if (!netif_running(net_dev))
-			return -EAGAIN;
-		data->val_out = bgmac_phy_read(bgmac, data->phy_id,
-					       data->reg_num & 0x1f);
-		return 0;
-	case SIOCSMIIREG:
-		if (!netif_running(net_dev))
-			return -EAGAIN;
-		bgmac_phy_write(bgmac, data->phy_id, data->reg_num & 0x1f,
-				data->val_in);
-		return 0;
-	default:
-		return -EOPNOTSUPP;
-	}
+	if (!netif_running(net_dev))
+		return -EINVAL;
+
+	if (!bgmac->phydev)
+		return -EINVAL;
+
+	return phy_mii_ioctl(bgmac->phydev, ifr, cmd);
 }
 
 static const struct net_device_ops bgmac_netdev_ops = {
@@ -1261,61 +1248,16 @@ static int bgmac_get_settings(struct net
 {
 	struct bgmac *bgmac = netdev_priv(net_dev);
 
-	cmd->supported = SUPPORTED_10baseT_Half |
-			 SUPPORTED_10baseT_Full |
-			 SUPPORTED_100baseT_Half |
-			 SUPPORTED_100baseT_Full |
-			 SUPPORTED_1000baseT_Half |
-			 SUPPORTED_1000baseT_Full |
-			 SUPPORTED_Autoneg;
-
-	if (bgmac->autoneg) {
-		WARN_ON(cmd->advertising);
-		if (bgmac->full_duplex) {
-			if (bgmac->speed & BGMAC_SPEED_10)
-				cmd->advertising |= ADVERTISED_10baseT_Full;
-			if (bgmac->speed & BGMAC_SPEED_100)
-				cmd->advertising |= ADVERTISED_100baseT_Full;
-			if (bgmac->speed & BGMAC_SPEED_1000)
-				cmd->advertising |= ADVERTISED_1000baseT_Full;
-		} else {
-			if (bgmac->speed & BGMAC_SPEED_10)
-				cmd->advertising |= ADVERTISED_10baseT_Half;
-			if (bgmac->speed & BGMAC_SPEED_100)
-				cmd->advertising |= ADVERTISED_100baseT_Half;
-			if (bgmac->speed & BGMAC_SPEED_1000)
-				cmd->advertising |= ADVERTISED_1000baseT_Half;
-		}
-	} else {
-		switch (bgmac->speed) {
-		case BGMAC_SPEED_10:
-			ethtool_cmd_speed_set(cmd, SPEED_10);
-			break;
-		case BGMAC_SPEED_100:
-			ethtool_cmd_speed_set(cmd, SPEED_100);
-			break;
-		case BGMAC_SPEED_1000:
-			ethtool_cmd_speed_set(cmd, SPEED_1000);
-			break;
-		}
-	}
-
-	cmd->duplex = bgmac->full_duplex ? DUPLEX_FULL : DUPLEX_HALF;
-
-	cmd->autoneg = bgmac->autoneg;
-
-	return 0;
+	return phy_ethtool_gset(bgmac->phydev, cmd);
 }
 
-#if 0
 static int bgmac_set_settings(struct net_device *net_dev,
 			      struct ethtool_cmd *cmd)
 {
 	struct bgmac *bgmac = netdev_priv(net_dev);
 
-	return -1;
+	return phy_ethtool_sset(bgmac->phydev, cmd);
 }
-#endif
 
 static void bgmac_get_drvinfo(struct net_device *net_dev,
 			      struct ethtool_drvinfo *info)
@@ -1326,6 +1268,7 @@ static void bgmac_get_drvinfo(struct net
 
 static const struct ethtool_ops bgmac_ethtool_ops = {
 	.get_settings		= bgmac_get_settings,
+	.set_settings		= bgmac_set_settings,
 	.get_drvinfo		= bgmac_get_drvinfo,
 };
 
@@ -1344,10 +1287,36 @@ static int bgmac_mii_write(struct mii_bu
 	return bgmac_phy_write(bus->priv, mii_id, regnum, value);
 }
 
+static void bgmac_adjust_link(struct net_device *dev)
+{
+	struct bgmac *bgmac = netdev_priv(dev);
+	struct phy_device *phydev = bgmac->phydev;
+	bool status_changed = 0;
+
+	BUG_ON(!phydev);
+
+	if (bgmac->old_link != phydev->link) {
+		status_changed = 1;
+		bgmac->old_link = phydev->link;
+	}
+
+	/* reflect duplex change */
+	if (phydev->link && (bgmac->old_duplex != phydev->duplex)) {
+		status_changed = 1;
+		bgmac->old_duplex = phydev->duplex;
+	}
+
+	if (status_changed)
+		phy_print_status(phydev);
+}
+
 static int bgmac_mii_register(struct bgmac *bgmac)
 {
 	struct mii_bus *mii_bus;
 	int i, err = 0;
+	struct phy_device *phydev = NULL;
+	char phy_id[MII_BUS_ID_SIZE + 3];
+	struct net_device *net_dev = bgmac->net_dev;
 
 	mii_bus = mdiobus_alloc();
 	if (!mii_bus)
@@ -1378,7 +1347,28 @@ static int bgmac_mii_register(struct bgm
 
 	bgmac->mii_bus = mii_bus;
 
-	return err;
+	/* connect to PHY */
+	snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT,
+		 mii_bus->id, bgmac->phyaddr);
+
+	phydev = phy_connect(net_dev, phy_id, &bgmac_adjust_link,
+			     PHY_INTERFACE_MODE_MII);
+
+	if (IS_ERR(phydev)) {
+		netdev_err(net_dev, "could not attach PHY: %s\n", phy_id);
+		bgmac->phyaddr = BGMAC_PHY_NOREGS;
+		return PTR_ERR(phydev);
+	}
+
+	bgmac->phydev = phydev;
+	bgmac->old_link = 0;
+	bgmac->old_duplex = -1;
+	bgmac->phyaddr = phydev->addr;
+
+	netdev_info(net_dev, "attached PHY driver [%s] (mii_bus:phy_addr=%s)\n",
+		    phydev->drv->name, dev_name(&phydev->dev));
+
+	return 0;
 
 err_free_irq:
 	kfree(mii_bus->irq);
--- a/drivers/net/ethernet/broadcom/bgmac.h
+++ b/drivers/net/ethernet/broadcom/bgmac.h
@@ -401,7 +401,10 @@ struct bgmac {
 	struct bcma_device *cmn; /* Reference to CMN core for BCM4706 */
 	struct net_device *net_dev;
 	struct napi_struct napi;
+	struct phy_device *phydev;
 	struct mii_bus *mii_bus;
+	int old_link;
+	int old_duplex;
 
 	/* DMA */
 	struct bgmac_dma_ring tx_ring[BGMAC_MAX_TX_RINGS];