ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-28 09:39:00 +00:00
Code Issues Actions 10 Packages Projects Releases Wiki Activity
452e4f064f
openwrt/package/system/gpio-cdev/nu801/Makefile

40 lines
1.1 KiB
Makefile
Raw Normal View History

gpio-cdev: re-add nu801 userspace driver This reverts commit 80b7a8a7f5a0a88fde6dd19f097df4d7cac9ff04. Now that 5.10 is the default kernel for all platforms, we can bring back the NU801 userspace driver for platforms that rely on it. Currently it's used on the MX100 x86_64 target, but other Meraki platforms use this controller. Note that we also now change how we load nu801. The way we did this previously with procd worked, but it meant it didn't load until everything was up and working. To fix this, let's call nu801 from boot and re-trigger the preinit blink sequence. Since nu801 runs as a daemon this is now something we can do. Signed-off-by: Chris Blake <chrisrblake93@gmail.com> (removed empty line, currently only MX100 uses it so: @TARGET_x86) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-03-19 22:13:42 +00:00
# SPDX-License-Identifier: GPL-2.0-or-later
include $(TOPDIR)/rules.mk
PKG_NAME:=nu801
PKG_RELEASE:=1
PKG_SOURCE_PROTO:=git
PKG_SOURCE_URL:=https://github.com/chunkeey/nu801.git
nu801: add MR26 to the table The MR26 uses a NU801 for the RGB-Leds. Make the LEDs available. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-06-25 16:29:22 +00:00
PKG_SOURCE_VERSION:=f623879a393d0315f29095fe46b19cd2246d10d7
PKG_MIRROR_HASH:=db21671a1c14f0bfeb65525cbfd0576d2d5bbebf3901e35e64f9bf92a9a53b0d
gpio-cdev: re-add nu801 userspace driver This reverts commit 80b7a8a7f5a0a88fde6dd19f097df4d7cac9ff04. Now that 5.10 is the default kernel for all platforms, we can bring back the NU801 userspace driver for platforms that rely on it. Currently it's used on the MX100 x86_64 target, but other Meraki platforms use this controller. Note that we also now change how we load nu801. The way we did this previously with procd worked, but it meant it didn't load until everything was up and working. To fix this, let's call nu801 from boot and re-trigger the preinit blink sequence. Since nu801 runs as a daemon this is now something we can do. Signed-off-by: Chris Blake <chrisrblake93@gmail.com> (removed empty line, currently only MX100 uses it so: @TARGET_x86) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-03-19 22:13:42 +00:00
PKG_MAINTAINER:=Christian Lamparter <chunkeey@gmail.com>
PKG_LICENSE:=GPL-3.0-or-later
PKG_LICENSE_FILES:=LICENSE
include $(INCLUDE_DIR)/package.mk
include $(INCLUDE_DIR)/cmake.mk
define Package/nu801
SECTION:=utils
CATEGORY:=Utilities
SUBMENU:=Userspace GPIO Drivers
ath79: add Cisco Meraki MR18 Specifications: SOC: Atheros/Qualcomm QCA9557-AT4A @ 720MHz RAM: 2x Winbond W9751G6KB-25 (128 MiB) FLASH: Hynix H27U1G8F2BTR-BC TSOP48 ONFI NAND (128 MiB) WIFI1: Atheros AR9550 5.0GHz (SoC) WIFI2: Atheros AR9582-AR1A 2.4GHz WIFI2: Atheros AR9582-AR1A 2.4GHz + 5GHz PHYETH: Atheros AR8035-A, 802.3af PoE capable Atheros (1x Gigabit LAN) LED: 1x Power-LED, 1 x RGB Tricolor-LED INPUT: One Reset Button UART: JP1 on PCB (Labeled UART), 3.3v-Level, 115200n8 (VCC, RX, TX, GND - VCC is closest to the boot set jumper under the console pins.) Flashing instructions: Depending on the installed firmware, there are vastly different methods to flash a MR18. These have been documented on: <https://openwrt.org/toh/meraki/mr18> Tip: Use an initramfs from a previous release and then use sysupgrade to get to the later releases. This is because the initramfs can no longer be built by the build-bots due to its size (>8 MiB). Note on that: Upgrades from AR71XX releases are possible, but they will require the force sysupgrade option ( -F ). Please backup your MR18's configuration before starting the update. The reason here is that a lot of development happend since AR71XX got removed, so I do advise to use the ( -n ) option for sysupgrade as well. This will cause the device to drop the old AR71xx configuration and make a new configurations from scratch. Note on LEDs: The LEDs has changed since AR71XX. The white LED is now used during the boot and when upgrading instead of the green tricolor LED. The technical reason is that currently the RGB-LED is brought up later by a userspace daemon. (added warning note about odm-caldata partition. remove initramfs - it's too big to be built by the bots. MerakiNAND -> meraki-header. sort nu801's targets) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2021-07-30 15:59:25 +00:00
DEPENDS:=@(TARGET_ath79_nand||TARGET_bcm53xx||TARGET_x86)
gpio-cdev: re-add nu801 userspace driver This reverts commit 80b7a8a7f5a0a88fde6dd19f097df4d7cac9ff04. Now that 5.10 is the default kernel for all platforms, we can bring back the NU801 userspace driver for platforms that rely on it. Currently it's used on the MX100 x86_64 target, but other Meraki platforms use this controller. Note that we also now change how we load nu801. The way we did this previously with procd worked, but it meant it didn't load until everything was up and working. To fix this, let's call nu801 from boot and re-trigger the preinit blink sequence. Since nu801 runs as a daemon this is now something we can do. Signed-off-by: Chris Blake <chrisrblake93@gmail.com> (removed empty line, currently only MX100 uses it so: @TARGET_x86) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-03-19 22:13:42 +00:00
KCONFIG:=CONFIG_GPIO_CDEV=y
TITLE:=NU801 LED Driver
endef
define Package/nu801/description
This package contains a userspace driver to power the NUMEN Tech. NU801 LED Driver.
endef
define Package/nu801/install
$(INSTALL_DIR) $(1)/usr/sbin
$(INSTALL_BIN) $(PKG_BUILD_DIR)/nu801 $(1)/usr/sbin/
$(INSTALL_DIR) $(1)/etc/init.d
$(INSTALL_BIN) ./files/nu801.init $(1)/etc/init.d/nu801
endef
$(eval $(call BuildPackage,nu801))
Reference in New Issue Copy Permalink