openwrt/target/linux/bcm27xx/patches-5.4/950-0890-dtoverlays-Create-an-overlay-for-the-Omnivision-OV72.patch

From 870de3bc0e80a9b79b470a45636437a0078041c1 Mon Sep 17 00:00:00 2001
From: Dave Stevenson <dave.stevenson@raspberrypi.com>
Date: Tue, 7 Jul 2020 16:12:05 +0100
Subject: [PATCH] dtoverlays: Create an overlay for the Omnivision
 OV7251 sensor

Adds an overlay for the OV7251 VGA global shutter sensor.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
---
 arch/arm/boot/dts/overlays/Makefile           |   1 +
 arch/arm/boot/dts/overlays/README             |   8 ++
 arch/arm/boot/dts/overlays/ov7251-overlay.dts | 111 ++++++++++++++++++
 3 files changed, 120 insertions(+)
 create mode 100644 arch/arm/boot/dts/overlays/ov7251-overlay.dts

--- a/arch/arm/boot/dts/overlays/Makefile
+++ b/arch/arm/boot/dts/overlays/Makefile
@@ -115,6 +115,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
 	mpu6050.dtbo \
 	mz61581.dtbo \
 	ov5647.dtbo \
+	ov7251.dtbo \
 	ov9281.dtbo \
 	papirus.dtbo \
 	pibell.dtbo \
--- a/arch/arm/boot/dts/overlays/README
+++ b/arch/arm/boot/dts/overlays/README
@@ -1813,6 +1813,14 @@ Load:   dtoverlay=ov5647
 Params: <None>
 
 
+Name:   ov7251
+Info:   Omnivision OV7251 camera module.
+        Uses Unicam 1, which is the standard camera connector on most Pi
+        variants.
+Load:   dtoverlay=ov7251
+Params: <None>
+
+
 Name:   ov9281
 Info:   Omnivision OV9281 camera module.
         Uses Unicam 1, which is the standard camera connector on most Pi
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/ov7251-overlay.dts
@@ -0,0 +1,111 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Definitions for OV7251 camera module on VC I2C bus
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+/{
+	compatible = "brcm,bcm2835";
+
+	fragment@0 {
+		target = <&i2c_csi_dsi>;
+		__overlay__ {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "okay";
+
+			ov7251: ov7251@60 {
+				compatible = "ovti,ov7251";
+				reg = <0x60>;
+				status = "okay";
+
+				clocks = <&ov7251_clk>;
+				clock-names = "xclk";
+				clock-frequency = <24000000>;
+
+				vdddo-supply = <&ov7251_dovdd>;
+				vdda-supply = <&ov7251_avdd>;
+				vddd-supply = <&ov7251_dvdd>;
+
+				enable-gpios = <&gpio 41 GPIO_ACTIVE_HIGH>;
+
+				port {
+					ov7251_0: endpoint {
+						remote-endpoint = <&csi1_ep>;
+						clock-lanes = <0>;
+						data-lanes = <1>;
+						clock-noncontinuous;
+						link-frequencies =
+							/bits/ 64 <456000000>;
+					};
+				};
+			};
+		};
+	};
+
+	fragment@1 {
+		target = <&csi1>;
+		__overlay__ {
+			status = "okay";
+
+			port {
+				csi1_ep: endpoint {
+					remote-endpoint = <&ov7251_0>;
+					data-lanes = <1>;
+				};
+			};
+		};
+	};
+
+	fragment@2 {
+		target = <&i2c0if>;
+		__overlay__ {
+			status = "okay";
+		};
+	};
+
+	fragment@3 {
+		target-path="/";
+		__overlay__ {
+			ov7251_avdd: fixedregulator@0 {
+				compatible = "regulator-fixed";
+				regulator-name = "ov7251_avdd";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+			ov7251_dovdd: fixedregulator@1 {
+				compatible = "regulator-fixed";
+				regulator-name = "ov7251_dovdd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+			ov7251_dvdd: fixedregulator@2 {
+				compatible = "regulator-fixed";
+				regulator-name = "ov7251_dvdd";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+			ov7251_clk: ov7251-clk {
+				compatible = "fixed-clock";
+				#clock-cells = <0>;
+				clock-frequency = <24000000>;
+			};
+		};
+	};
+
+	fragment@4 {
+		target = <&i2c0mux>;
+		__overlay__ {
+			status = "okay";
+		};
+	};
+
+	fragment@5 {
+		target-path="/__overrides__";
+		__overlay__ {
+			cam0-pwdn-ctrl = <&ov7251>,"enable-gpios:0";
+			cam0-pwdn      = <&ov7251>,"enable-gpios:4";
+		};
+	};
+};