openwrt/target/linux/bcm27xx/patches-5.4/950-0358-Allow-simultaneous-use-of-JustBoom-DAC-and-Digi.patch

From eecd29a4a5ede49427e48ea27e372b96d11f3d04 Mon Sep 17 00:00:00 2001
From: Johannes Krude <johannes@krude.de>
Date: Sat, 16 Nov 2019 13:14:43 +0100
Subject: [PATCH] Allow simultaneous use of JustBoom DAC and Digi

Signed-off-by: Johannes Krude <johannes@krude.de>
---
 arch/arm/boot/dts/overlays/Makefile           |   1 +
 arch/arm/boot/dts/overlays/README             |  20 ++
 .../dts/overlays/justboom-both-overlay.dts    |  65 +++++
 sound/soc/bcm/Kconfig                         |  12 +
 sound/soc/bcm/Makefile                        |   2 +
 sound/soc/bcm/justboom-both.c                 | 266 ++++++++++++++++++
 11 files changed, 371 insertions(+)
 create mode 100644 arch/arm/boot/dts/overlays/justboom-both-overlay.dts
 create mode 100644 sound/soc/bcm/justboom-both.c

--- a/arch/arm/boot/dts/overlays/Makefile
+++ b/arch/arm/boot/dts/overlays/Makefile
@@ -86,6 +86,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
 	iqaudio-digi-wm8804-audio.dtbo \
 	irs1125.dtbo \
 	jedec-spi-nor.dtbo \
+	justboom-both.dtbo \
 	justboom-dac.dtbo \
 	justboom-digi.dtbo \
 	ltc294x.dtbo \
--- a/arch/arm/boot/dts/overlays/README
+++ b/arch/arm/boot/dts/overlays/README
@@ -1388,6 +1388,26 @@ Params: flash-spi<n>-<m>        Enables
                                 on SPI<n>, CS#<m>.
 
 
+Name:   justboom-both
+Info:   Simultaneous usage of an justboom-dac and justboom-digi based
+        card
+Load:   dtoverlay=justboom-both,<param>=<val>
+Params: 24db_digital_gain       Allow gain to be applied via the PCM512x codec
+                                Digital volume control. Enable with
+                                "dtoverlay=justboom-dac,24db_digital_gain"
+                                (The default behaviour is that the Digital
+                                volume control is limited to a maximum of
+                                0dB. ie. it can attenuate but not provide
+                                gain. For most users, this will be desired
+                                as it will prevent clipping. By appending
+                                the 24dB_digital_gain parameter, the Digital
+                                volume control will allow up to 24dB of
+                                gain. If this parameter is enabled, it is the
+                                responsibility of the user to ensure that
+                                the Digital volume control is set to a value
+                                that does not result in clipping/distortion!)
+
+
 Name:   justboom-dac
 Info:   Configures the JustBoom DAC HAT, Amp HAT, DAC Zero and Amp Zero audio
         cards
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/justboom-both-overlay.dts
@@ -0,0 +1,65 @@
+// SPDX-License-Identifier: GPL-2.0
+// Definitions for JustBoom Both (Digi+DAC)
+/dts-v1/;
+/plugin/;
+
+/ {
+	compatible = "brcm,bcm2835";
+
+	fragment@0 {
+		target = <&i2s>;
+		__overlay__ {
+			status = "okay";
+		};
+	};
+
+	fragment@1 {
+		target = <&i2c1>;
+		__overlay__ {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "okay";
+
+			wm8804@3b {
+				#sound-dai-cells = <0>;
+				compatible = "wlf,wm8804";
+				reg = <0x3b>;
+				PVDD-supply = <&vdd_3v3_reg>;
+				DVDD-supply = <&vdd_3v3_reg>;
+				status = "okay";
+			};
+		};
+	};
+
+	fragment@2 {
+		target = <&i2c1>;
+		__overlay__ {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "okay";
+
+			pcm5122@4d {
+				#sound-dai-cells = <0>;
+				compatible = "ti,pcm5122";
+				reg = <0x4d>;
+				AVDD-supply = <&vdd_3v3_reg>;
+				DVDD-supply = <&vdd_3v3_reg>;
+				CPVDD-supply = <&vdd_3v3_reg>;
+				status = "okay";
+			};
+		};
+	};
+
+	fragment@3 {
+		target = <&sound>;
+		frag3: __overlay__ {
+			compatible = "justboom,justboom-both";
+			i2s-controller = <&i2s>;
+			status = "okay";
+		};
+	};
+
+	__overrides__ {
+		24db_digital_gain = <&frag3>,"justboom,24db_digital_gain?";
+	};
+};
--- a/sound/soc/bcm/Kconfig
+++ b/sound/soc/bcm/Kconfig
@@ -105,6 +105,18 @@ config SND_BCM2708_SOC_RPI_PROTO
 	help
 	  Say Y or M if you want to add support for Audio Codec Board PROTO (WM8731).
 
+config SND_BCM2708_SOC_JUSTBOOM_BOTH
+	tristate "Support for simultaneous JustBoom Digi and JustBoom DAC"
+	depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S
+	select SND_SOC_WM8804
+	select SND_SOC_PCM512x
+	help
+		Say Y or M if you want to add support for simultaneous
+		JustBoom Digi and JustBoom DAC.
+
+		This is not the right choice if you only have one but both of
+		these cards.
+
 config SND_BCM2708_SOC_JUSTBOOM_DAC
 	tristate "Support for JustBoom DAC"
 	depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S
--- a/sound/soc/bcm/Makefile
+++ b/sound/soc/bcm/Makefile
@@ -17,6 +17,7 @@ snd-soc-hifiberry-dacplus-objs := hifibe
 snd-soc-hifiberry-dacplusadc-objs := hifiberry_dacplusadc.o
 snd-soc-hifiberry-dacplusadcpro-objs := hifiberry_dacplusadcpro.o
 snd-soc-hifiberry-dacplusdsp-objs := hifiberry_dacplusdsp.o
+snd-soc-justboom-both-objs := justboom-both.o
 snd-soc-justboom-dac-objs := justboom-dac.o
 snd-soc-rpi-cirrus-objs := rpi-cirrus.o
 snd-soc-rpi-proto-objs := rpi-proto.o
@@ -43,6 +44,7 @@ obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_D
 obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUSADC) += snd-soc-hifiberry-dacplusadc.o
 obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUSADCPRO) += snd-soc-hifiberry-dacplusadcpro.o
 obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUSDSP) += snd-soc-hifiberry-dacplusdsp.o
+obj-$(CONFIG_SND_BCM2708_SOC_JUSTBOOM_BOTH) += snd-soc-justboom-both.o
 obj-$(CONFIG_SND_BCM2708_SOC_JUSTBOOM_DAC) += snd-soc-justboom-dac.o
 obj-$(CONFIG_SND_BCM2708_SOC_RPI_CIRRUS) += snd-soc-rpi-cirrus.o
 obj-$(CONFIG_SND_BCM2708_SOC_RPI_PROTO) += snd-soc-rpi-proto.o
--- /dev/null
+++ b/sound/soc/bcm/justboom-both.c
@@ -0,0 +1,266 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * rpi--wm8804.c -- ALSA SoC Raspberry Pi soundcard.
+ *
+ * Authors: Johannes Krude <johannes@krude.de
+ *
+ * Driver for when connecting simultaneously justboom-digi and justboom-dac
+ *
+ * Based upon code from:
+ * justboom-digi.c
+ * by Milan Neskovic <info@justboom.co>
+ * justboom-dac.c
+ * by Milan Neskovic <info@justboom.co>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/jack.h>
+
+#include "../codecs/wm8804.h"
+#include "../codecs/pcm512x.h"
+
+
+static bool digital_gain_0db_limit = true;
+
+static int snd_rpi_justboom_both_init(struct snd_soc_pcm_runtime *rtd)
+{
+	struct snd_soc_component *digi = rtd->codec_dais[0]->component;
+	struct snd_soc_component *dac = rtd->codec_dais[1]->component;
+
+	/* enable  TX output */
+	snd_soc_component_update_bits(digi, WM8804_PWRDN, 0x4, 0x0);
+
+	snd_soc_component_update_bits(dac, PCM512x_GPIO_EN, 0x08, 0x08);
+	snd_soc_component_update_bits(dac, PCM512x_GPIO_OUTPUT_4, 0xf, 0x02);
+	snd_soc_component_update_bits(dac, PCM512x_GPIO_CONTROL_1, 0x08, 0x08);
+
+	if (digital_gain_0db_limit) {
+		int ret;
+		struct snd_soc_card *card = rtd->card;
+
+		ret = snd_soc_limit_volume(card, "Digital Playback Volume",
+									207);
+		if (ret < 0)
+			dev_warn(card->dev, "Failed to set volume limit: %d\n",
+									ret);
+	}
+
+	return 0;
+}
+
+static int snd_rpi_justboom_both_hw_params(struct snd_pcm_substream *substream,
+				       struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_component *digi = rtd->codec_dais[0]->component;
+	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+
+	int sysclk = 27000000; /* This is fixed on this board */
+
+	long mclk_freq    = 0;
+	int mclk_div      = 1;
+	int sampling_freq = 1;
+
+	int ret;
+
+	int samplerate = params_rate(params);
+
+	if (samplerate <= 96000) {
+		mclk_freq = samplerate*256;
+		mclk_div  = WM8804_MCLKDIV_256FS;
+	} else {
+		mclk_freq = samplerate*128;
+		mclk_div  = WM8804_MCLKDIV_128FS;
+	}
+
+	switch (samplerate) {
+	case 32000:
+		sampling_freq = 0x03;
+		break;
+	case 44100:
+		sampling_freq = 0x00;
+		break;
+	case 48000:
+		sampling_freq = 0x02;
+		break;
+	case 88200:
+		sampling_freq = 0x08;
+		break;
+	case 96000:
+		sampling_freq = 0x0a;
+		break;
+	case 176400:
+		sampling_freq = 0x0c;
+		break;
+	case 192000:
+		sampling_freq = 0x0e;
+		break;
+	default:
+		dev_err(rtd->card->dev,
+		"Failed to set WM8804 SYSCLK, unsupported samplerate %d\n",
+		samplerate);
+	}
+
+	snd_soc_dai_set_clkdiv(codec_dai, WM8804_MCLK_DIV, mclk_div);
+	snd_soc_dai_set_pll(codec_dai, 0, 0, sysclk, mclk_freq);
+
+	ret = snd_soc_dai_set_sysclk(codec_dai, WM8804_TX_CLKSRC_PLL,
+					sysclk, SND_SOC_CLOCK_OUT);
+	if (ret < 0) {
+		dev_err(rtd->card->dev,
+		"Failed to set WM8804 SYSCLK: %d\n", ret);
+		return ret;
+	}
+
+	/* Enable TX output */
+	snd_soc_component_update_bits(digi, WM8804_PWRDN, 0x4, 0x0);
+
+	/* Power on */
+	snd_soc_component_update_bits(digi, WM8804_PWRDN, 0x9, 0);
+
+	/* set sampling frequency status bits */
+	snd_soc_component_update_bits(digi, WM8804_SPDTX4, 0x0f, sampling_freq);
+
+	return snd_soc_dai_set_bclk_ratio(cpu_dai, 64);
+}
+
+static int snd_rpi_justboom_both_startup(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_component *digi = rtd->codec_dais[0]->component;
+	struct snd_soc_component *dac = rtd->codec_dais[1]->component;
+
+	/* turn on digital output */
+	snd_soc_component_update_bits(digi, WM8804_PWRDN, 0x3c, 0x00);
+
+	snd_soc_component_update_bits(dac, PCM512x_GPIO_CONTROL_1, 0x08, 0x08);
+
+	return 0;
+}
+
+static void snd_rpi_justboom_both_shutdown(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_component *digi = rtd->codec_dais[0]->component;
+	struct snd_soc_component *dac = rtd->codec_dais[1]->component;
+
+	snd_soc_component_update_bits(dac, PCM512x_GPIO_CONTROL_1, 0x08, 0x00);
+
+	/* turn off output */
+	snd_soc_component_update_bits(digi, WM8804_PWRDN, 0x3c, 0x3c);
+}
+
+/* machine stream operations */
+static struct snd_soc_ops snd_rpi_justboom_both_ops = {
+	.hw_params = snd_rpi_justboom_both_hw_params,
+	.startup   = snd_rpi_justboom_both_startup,
+	.shutdown  = snd_rpi_justboom_both_shutdown,
+};
+
+SND_SOC_DAILINK_DEFS(rpi_justboom_both,
+	DAILINK_COMP_ARRAY(COMP_CPU("bcm2708-i2s.0")),
+	DAILINK_COMP_ARRAY(COMP_CODEC("pcm512x.1-004d", "pcm512x-hifi"),
+			   COMP_CODEC("wm8804.1-003b", "wm8804-spdif")),
+	DAILINK_COMP_ARRAY(COMP_PLATFORM("bcm2708-i2s.0")));
+
+static struct snd_soc_dai_link snd_rpi_justboom_both_dai[] = {
+{
+	.name           = "JustBoom Digi",
+	.stream_name    = "JustBoom Digi HiFi",
+	.dai_fmt        = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
+					SND_SOC_DAIFMT_CBM_CFM,
+	.ops            = &snd_rpi_justboom_both_ops,
+	.init           = snd_rpi_justboom_both_init,
+	SND_SOC_DAILINK_REG(rpi_justboom_both),
+},
+};
+
+/* audio machine driver */
+static struct snd_soc_card snd_rpi_justboom_both = {
+	.name             = "snd_rpi_justboom_both",
+	.driver_name      = "JustBoomBoth",
+	.owner            = THIS_MODULE,
+	.dai_link         = snd_rpi_justboom_both_dai,
+	.num_links        = ARRAY_SIZE(snd_rpi_justboom_both_dai),
+};
+
+static int snd_rpi_justboom_both_probe(struct platform_device *pdev)
+{
+	int ret = 0;
+	struct snd_soc_card *card = &snd_rpi_justboom_both;
+
+	snd_rpi_justboom_both.dev = &pdev->dev;
+
+	if (pdev->dev.of_node) {
+		struct device_node *i2s_node;
+		struct snd_soc_dai_link *dai = &snd_rpi_justboom_both_dai[0];
+
+		i2s_node = of_parse_phandle(pdev->dev.of_node,
+					    "i2s-controller", 0);
+
+		if (i2s_node) {
+			int i;
+
+			for (i = 0; i < card->num_links; i++) {
+				dai->cpus->dai_name = NULL;
+				dai->cpus->of_node = i2s_node;
+				dai->platforms->name = NULL;
+				dai->platforms->of_node = i2s_node;
+			}
+		}
+
+		digital_gain_0db_limit = !of_property_read_bool(
+			pdev->dev.of_node, "justboom,24db_digital_gain");
+	}
+
+	ret = snd_soc_register_card(card);
+	if (ret && ret != -EPROBE_DEFER) {
+		dev_err(&pdev->dev,
+			"snd_soc_register_card() failed: %d\n", ret);
+	}
+
+	return ret;
+}
+
+static int snd_rpi_justboom_both_remove(struct platform_device *pdev)
+{
+	return snd_soc_unregister_card(&snd_rpi_justboom_both);
+}
+
+static const struct of_device_id snd_rpi_justboom_both_of_match[] = {
+	{ .compatible = "justboom,justboom-both", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, snd_rpi_justboom_both_of_match);
+
+static struct platform_driver snd_rpi_justboom_both_driver = {
+	.driver = {
+		.name   = "snd-rpi-justboom-both",
+		.owner  = THIS_MODULE,
+		.of_match_table = snd_rpi_justboom_both_of_match,
+	},
+	.probe          = snd_rpi_justboom_both_probe,
+	.remove         = snd_rpi_justboom_both_remove,
+};
+
+module_platform_driver(snd_rpi_justboom_both_driver);
+
+MODULE_AUTHOR("Johannes Krude <johannes@krude.de>");
+MODULE_DESCRIPTION("ASoC Driver for simultaneous use of JustBoom PI Digi & DAC HAT Sound Cards");
+MODULE_LICENSE("GPL v2");