openwrt/target/linux/bcm27xx/patches-6.6/950-0440-serial-8250-Add-NOMSI-bug-for-bcm2835aux.patch

From 14f02e6c4b2937eb7bcbbb7e5a5e661d37475e3d Mon Sep 17 00:00:00 2001
From: Phil Elwell <phil@raspberrypi.com>
Date: Mon, 24 Apr 2023 11:48:31 +0100
Subject: [PATCH 0440/1085] serial: 8250: Add NOMSI bug for bcm2835aux

The BCM2835 mini-UART has no modem status interrupt, causing all
transmission to stop, never to use, if a speed change ever happens
while the CTS signal is high.

Add a simple polling mechanism in order to allow recovery in that
situation.

Signed-off-by: Phil Elwell <phil@raspberrypi.com>
---
 drivers/tty/serial/8250/8250.h            |  1 +
 drivers/tty/serial/8250/8250_bcm2835aux.c |  1 +
 drivers/tty/serial/8250/8250_core.c       | 15 +++++++++++++++
 drivers/tty/serial/8250/8250_port.c       |  9 +++++++++
 4 files changed, 26 insertions(+)

--- a/drivers/tty/serial/8250/8250.h
+++ b/drivers/tty/serial/8250/8250.h
@@ -92,6 +92,7 @@ struct serial8250_config {
 #define UART_BUG_NOMSR	BIT(2)	/* UART has buggy MSR status bits (Au1x00) */
 #define UART_BUG_THRE	BIT(3)	/* UART has buggy THRE reassertion */
 #define UART_BUG_TXRACE	BIT(5)	/* UART Tx fails to set remote DR */
+#define UART_BUG_NOMSI	BIT(6)	/* UART has no modem status interrupt */
 
 
 #ifdef CONFIG_SERIAL_8250_SHARE_IRQ
--- a/drivers/tty/serial/8250/8250_bcm2835aux.c
+++ b/drivers/tty/serial/8250/8250_bcm2835aux.c
@@ -109,6 +109,7 @@ static int bcm2835aux_serial_probe(struc
 			UPF_SKIP_TEST | UPF_IOREMAP;
 	up.port.rs485_config = serial8250_em485_config;
 	up.port.rs485_supported = serial8250_em485_supported;
+	up.bugs |= UART_BUG_NOMSI;
 	up.rs485_start_tx = bcm2835aux_rs485_start_tx;
 	up.rs485_stop_tx = bcm2835aux_rs485_stop_tx;
 
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -253,6 +253,18 @@ static void serial8250_timeout(struct ti
 	mod_timer(&up->timer, jiffies + uart_poll_timeout(&up->port));
 }
 
+static void serial8250_cts_poll_timeout(struct timer_list *t)
+{
+	struct uart_8250_port *up = from_timer(up, t, timer);
+	unsigned long flags;
+
+	spin_lock_irqsave(&up->port.lock, flags);
+	serial8250_modem_status(up);
+	spin_unlock_irqrestore(&up->port.lock, flags);
+	if (up->port.hw_stopped)
+		mod_timer(&up->timer, jiffies + 1);
+}
+
 static void serial8250_backup_timeout(struct timer_list *t)
 {
 	struct uart_8250_port *up = from_timer(up, t, timer);
@@ -315,6 +327,9 @@ static void univ8250_setup_timer(struct
 			  uart_poll_timeout(port) + HZ / 5);
 	}
 
+	if (up->bugs & UART_BUG_NOMSI)
+		up->timer.function = serial8250_cts_poll_timeout;
+
 	/*
 	 * If the "interrupt" for this port doesn't correspond with any
 	 * hardware interrupt, we use a timer-based system.  The original
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -1529,6 +1529,9 @@ static void serial8250_stop_tx(struct ua
 		serial_icr_write(up, UART_ACR, up->acr);
 	}
 	serial8250_rpm_put(up);
+
+	if (port->hw_stopped && (up->bugs & UART_BUG_NOMSI))
+		mod_timer(&up->timer, jiffies + 1);
 }
 
 static inline void __start_tx(struct uart_port *port)
@@ -1642,6 +1645,9 @@ static void serial8250_start_tx(struct u
 	/* Port locked to synchronize UART_IER access against the console. */
 	lockdep_assert_held_once(&port->lock);
 
+	if (up->bugs & UART_BUG_NOMSI)
+		del_timer(&up->timer);
+
 	if (!port->x_char && uart_circ_empty(&port->state->xmit))
 		return;
 
@@ -1866,6 +1872,9 @@ unsigned int serial8250_modem_status(str
 			uart_handle_cts_change(port, status & UART_MSR_CTS);
 
 		wake_up_interruptible(&port->state->port.delta_msr_wait);
+	} else if (up->bugs & UART_BUG_NOMSI &&	port->hw_stopped &&
+		   status & UART_MSR_CTS) {
+		uart_handle_cts_change(port, status & UART_MSR_CTS);
 	}
 
 	return status;