openwrt/target/linux/realtek/dts-5.10/rtl8382_d-link_dgs-1210-10p.dts

159 lines
2.9 KiB
Plaintext
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "rtl838x.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
/ {
compatible = "d-link,dgs-1210-10p", "realtek,rtl838x-soc";
model = "D-Link DGS-1210-10P";
aliases {
led-boot = &led_power;
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
};
memory@0 {
device_type = "memory";
reg = <0x0 0x8000000>;
};
leds {
pinctrl-names = "default";
pinctrl-0 = <&pinmux_disable_sys_led>;
compatible = "gpio-leds";
led_power: power {
// GPIO 0 seems to provide power to the leds
label = "green:power";
gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
};
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <20>;
/* is this pin 30 on the external RTL8231 (&gpio1)? */
/*mode {
label = "reset";
gpios = <&gpio0 94 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};*/
};
gpio1: rtl8231-gpio {
compatible = "realtek,rtl8231-gpio";
#gpio-cells = <2>;
gpio-controller;
indirect-access-bus-id = <0>;
};
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x00000000 0x80000>;
read-only;
};
partition@80000 {
label = "u-boot-env";
reg = <0x00080000 0x40000>;
read-only;
};
partition@c0000 {
label = "u-boot-env2";
reg = <0x000c0000 0x40000>;
};
partition@280000 {
label = "firmware";
compatible = "denx,uimage";
reg = <0x00100000 0xd80000>;
};
partition@be80000 {
label = "kernel2";
reg = <0x00e80000 0x180000>;
};
partition@1000000 {
label = "sysinfo";
reg = <0x01000000 0x40000>;
};
partition@1040000 {
label = "rootfs2";
reg = <0x01040000 0xc00000>;
};
partition@1c40000 {
label = "jffs2";
reg = <0x01c40000 0x3c0000>;
};
};
};
};
&uart1 {
status = "okay";
};
&ethernet0 {
mdio: mdio-bus {
compatible = "realtek,rtl838x-mdio";
regmap = <&ethernet0>;
#address-cells = <1>;
#size-cells = <0>;
INTERNAL_PHY(8)
INTERNAL_PHY(9)
INTERNAL_PHY(10)
INTERNAL_PHY(11)
INTERNAL_PHY(12)
INTERNAL_PHY(13)
INTERNAL_PHY(14)
INTERNAL_PHY(15)
INTERNAL_PHY(24)
INTERNAL_PHY(26)
};
};
&switch0 {
ports {
#address-cells = <1>;
#size-cells = <0>;
SWITCH_PORT(8, 1, internal)
SWITCH_PORT(9, 2, internal)
SWITCH_PORT(10, 3, internal)
SWITCH_PORT(11, 4, internal)
SWITCH_PORT(12, 5, internal)
SWITCH_PORT(13, 6, internal)
SWITCH_PORT(14, 7, internal)
SWITCH_PORT(15, 8, internal)
SWITCH_SFP_PORT(24, 9, rgmii-id)
SWITCH_SFP_PORT(26, 10, rgmii-id)
port@28 {
ethernet = <&ethernet0>;
reg = <28>;
phy-mode = "internal";
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
};