mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-29 18:19:02 +00:00
120 lines
4.9 KiB
Diff
120 lines
4.9 KiB
Diff
|
From 2679834327b5b8db8a7b0c90b632b81c35f9e271 Mon Sep 17 00:00:00 2001
|
||
|
|
From: James Hughes <james.hughes@raspberrypi.org>
|
||
|
|
Date: Thu, 31 Oct 2019 14:39:44 +0000
|
||
|
|
Subject: [PATCH] net:phy:2711 Allow ethernet LED mode to be set via
|
||
|
|
device tree
|
||
|
|
|
||
|
|
Add device tree entries and code to allow the specification of
|
||
|
|
the lighting modes for the LED's on the ethernet connector.
|
||
|
|
|
||
|
|
Signed-off-by: James Hughes <james.hughes@raspberrypi.org>
|
||
|
|
---
|
||
|
|
arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 3 +++
|
||
|
|
arch/arm/boot/dts/bcm2838.dtsi | 1 +
|
||
|
|
arch/arm/boot/dts/overlays/README | 28 +++++++++++++++++++--------
|
||
|
|
drivers/net/phy/broadcom.c | 9 +++++++--
|
||
|
|
4 files changed, 31 insertions(+), 10 deletions(-)
|
||
|
|
|
||
|
|
--- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
|
||
|
|
+++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
|
||
|
|
@@ -334,5 +334,8 @@
|
||
|
|
pwr_led_gpio = <&pwr_led>,"gpios:4";
|
||
|
|
pwr_led_activelow = <&pwr_led>,"gpios:8";
|
||
|
|
pwr_led_trigger = <&pwr_led>,"linux,default-trigger";
|
||
|
|
+
|
||
|
|
+ eth_led0 = <&phy1>,"led-modes:0";
|
||
|
|
+ eth_led1 = <&phy1>,"led-modes:4";
|
||
|
|
};
|
||
|
|
};
|
||
|
|
--- a/arch/arm/boot/dts/bcm2838.dtsi
|
||
|
|
+++ b/arch/arm/boot/dts/bcm2838.dtsi
|
||
|
|
@@ -380,6 +380,7 @@
|
||
|
|
/* No interrupts - use PHY_POLL */
|
||
|
|
max-speed = <1000>;
|
||
|
|
reg = <0x1>;
|
||
|
|
+ led-modes = <0x02 0x02>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
--- a/arch/arm/boot/dts/overlays/README
|
||
|
|
+++ b/arch/arm/boot/dts/overlays/README
|
||
|
|
@@ -102,26 +102,38 @@ Params:
|
||
|
|
|
||
|
|
eee Enable Energy Efficient Ethernet support for
|
||
|
|
compatible devices (default "on"). See also
|
||
|
|
- "tx_lpi_timer".
|
||
|
|
+ "tx_lpi_timer". Pi3B+ only.
|
||
|
|
|
||
|
|
eth_downshift_after Set the number of auto-negotiation failures
|
||
|
|
after which the 1000Mbps modes are disabled.
|
||
|
|
Legal values are 2, 3, 4, 5 and 0, where
|
||
|
|
- 0 means never downshift (default 2).
|
||
|
|
+ 0 means never downshift (default 2). Pi3B+ only.
|
||
|
|
|
||
|
|
- eth_led0 Set mode of LED0 (usually orange) (default
|
||
|
|
- "1"). The legal values are:
|
||
|
|
- 0=link/activity 1=link1000/activity
|
||
|
|
+ eth_led0 Set mode of LED0 (usually orange). The legal
|
||
|
|
+ values are:
|
||
|
|
+
|
||
|
|
+ Pi3B+
|
||
|
|
+
|
||
|
|
+ 0=link/activity 1=link1000/activity (default)
|
||
|
|
2=link100/activity 3=link10/activity
|
||
|
|
4=link100/1000/activity 5=link10/1000/activity
|
||
|
|
6=link10/100/activity 14=off 15=on
|
||
|
|
|
||
|
|
- eth_led1 Set mode of LED1 (usually green) (default
|
||
|
|
- "6"). See eth_led0 for legal values.
|
||
|
|
+ Pi4
|
||
|
|
+
|
||
|
|
+ 0=Speed/Activity (default) 1=Speed
|
||
|
|
+ 2=Speed/Flash activity 3=FDX
|
||
|
|
+ 4=Off 5=On
|
||
|
|
+ 6=Alt 7=Speed/Flash
|
||
|
|
+ 8=Link 9=Activity
|
||
|
|
+
|
||
|
|
+ eth_led1 Set mode of LED1 (usually green) (Pi3B+ default
|
||
|
|
+ "6", Pi4 default "0"). See eth_led0 for legal
|
||
|
|
+ values.
|
||
|
|
|
||
|
|
eth_max_speed Set the maximum speed a link is allowed
|
||
|
|
to negotiate. Legal values are 10, 100 and
|
||
|
|
- 1000 (default 1000).
|
||
|
|
+ 1000 (default 1000). Pi3B+ only.
|
||
|
|
|
||
|
|
i2c_arm Set to "on" to enable the ARM's i2c interface
|
||
|
|
(default "off")
|
||
|
|
--- a/drivers/net/phy/broadcom.c
|
||
|
|
+++ b/drivers/net/phy/broadcom.c
|
||
|
|
@@ -292,6 +292,9 @@ static void bcm54xx_adjust_rxrefclk(stru
|
||
|
|
static int bcm54xx_config_init(struct phy_device *phydev)
|
||
|
|
{
|
||
|
|
int reg, err, val;
|
||
|
|
+ u32 led_modes[] = {BCM_LED_MULTICOLOR_LINK_ACT,
|
||
|
|
+ BCM_LED_MULTICOLOR_LINK_ACT};
|
||
|
|
+ struct device_node *np = phydev->mdio.dev.of_node;
|
||
|
|
|
||
|
|
reg = phy_read(phydev, MII_BCM54XX_ECR);
|
||
|
|
if (reg < 0)
|
||
|
|
@@ -345,6 +348,8 @@ static int bcm54xx_config_init(struct ph
|
||
|
|
|
||
|
|
bcm54xx_phydsp_config(phydev);
|
||
|
|
|
||
|
|
+ of_property_read_u32_array(np, "led-modes", led_modes, 2);
|
||
|
|
+
|
||
|
|
/* Encode link speed into LED1 and LED3 pair (green/amber).
|
||
|
|
* Also flash these two LEDs on activity. This means configuring
|
||
|
|
* them for MULTICOLOR and encoding link/activity into them.
|
||
|
|
@@ -354,8 +359,8 @@ static int bcm54xx_config_init(struct ph
|
||
|
|
bcm_phy_write_shadow(phydev, BCM5482_SHD_LEDS1, val);
|
||
|
|
|
||
|
|
val = BCM_LED_MULTICOLOR_IN_PHASE |
|
||
|
|
- BCM5482_SHD_LEDS1_LED1(BCM_LED_MULTICOLOR_LINK_ACT) |
|
||
|
|
- BCM5482_SHD_LEDS1_LED3(BCM_LED_MULTICOLOR_LINK_ACT);
|
||
|
|
+ BCM5482_SHD_LEDS1_LED1(led_modes[0]) |
|
||
|
|
+ BCM5482_SHD_LEDS1_LED3(led_modes[1]);
|
||
|
|
bcm_phy_write_exp(phydev, BCM_EXP_MULTICOLOR, val);
|
||
|
|
|
||
|
|
return 0;
|