openwrt/target/linux/bcm27xx/patches-6.1/950-1072-drm-vc4-crtc-Support-odd-horizontal-timings-on-BCM27.patch

105 lines
3.4 KiB
Diff
Raw Normal View History

From f9f480b04f1dc280bd4411477f5ee7336361367b Mon Sep 17 00:00:00 2001
From: Dom Cobley <popcornmix@gmail.com>
Date: Tue, 24 Oct 2023 16:20:42 +0100
Subject: [PATCH] drm/vc4: crtc: Support odd horizontal timings on BCM2712
BCM2711 runs pixelvalve at two pixels per clock cycle which results
in an unfortunate limitation that odd horizontal timings are not
possible. This is apparent on the standard DMT mode of 1366x768@60
which cannot be driven with correct timing.
BCM2712 defaults to the same behaviour, but has a mode to support
odd timings. While internally it still runs at two pixels per clock,
setting the PV_VCONTROL_ODD_TIMING bit makes it appear externally
to behave as it is one pixel per clock.
Switching to this mode fixes 1366x768@60 mode, and other custom
resultions with odd horizontal timings.
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
---
drivers/gpu/drm/vc4/vc4_crtc.c | 12 ++++--------
drivers/gpu/drm/vc4/vc4_hdmi.c | 4 ++--
drivers/gpu/drm/vc4/vc4_regs.h | 1 +
3 files changed, 7 insertions(+), 10 deletions(-)
--- a/drivers/gpu/drm/vc4/vc4_crtc.c
+++ b/drivers/gpu/drm/vc4/vc4_crtc.c
@@ -398,12 +398,6 @@ static void vc4_crtc_config_pv(struct dr
vc4_crtc_pixelvalve_reset(crtc);
- /*
- * NOTE: The BCM2712 has a H_OTE (Horizontal Odd Timing Enable)
- * bit that, when set, will allow to specify the timings in
- * pixels instead of cycles, thus allowing to specify odd
- * timings.
- */
CRTC_WRITE(PV_HORZA,
VC4_SET_FIELD((mode->htotal - mode->hsync_end) * pixel_rep / ppc,
PV_HORZA_HBP) |
@@ -448,6 +442,7 @@ static void vc4_crtc_config_pv(struct dr
*/
CRTC_WRITE(PV_V_CONTROL,
PV_VCONTROL_CONTINUOUS |
+ (vc4->gen >= VC4_GEN_6 ? PV_VCONTROL_ODD_TIMING : 0) |
(is_dsi ? PV_VCONTROL_DSI : 0) |
PV_VCONTROL_INTERLACE |
(odd_field_first
@@ -459,6 +454,7 @@ static void vc4_crtc_config_pv(struct dr
} else {
CRTC_WRITE(PV_V_CONTROL,
PV_VCONTROL_CONTINUOUS |
+ (vc4->gen >= VC4_GEN_6 ? PV_VCONTROL_ODD_TIMING : 0) |
(is_dsi ? PV_VCONTROL_DSI : 0));
CRTC_WRITE(PV_VSYNCD_EVEN, 0);
}
@@ -1334,7 +1330,7 @@ const struct vc4_pv_data bcm2712_pv0_dat
.hvs_output = 0,
},
.fifo_depth = 64,
- .pixels_per_clock = 2,
+ .pixels_per_clock = 1,
.encoder_types = {
[0] = VC4_ENCODER_TYPE_HDMI0,
},
@@ -1347,7 +1343,7 @@ const struct vc4_pv_data bcm2712_pv1_dat
.hvs_output = 1,
},
.fifo_depth = 64,
- .pixels_per_clock = 2,
+ .pixels_per_clock = 1,
.encoder_types = {
[0] = VC4_ENCODER_TYPE_HDMI1,
},
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -3958,7 +3958,7 @@ static const struct vc4_hdmi_variant bcm
PHY_LANE_2,
PHY_LANE_CK,
},
- .unsupported_odd_h_timings = true,
+ .unsupported_odd_h_timings = false,
.external_irq_controller = true,
.init_resources = vc5_hdmi_init_resources,
@@ -3985,7 +3985,7 @@ static const struct vc4_hdmi_variant bcm
PHY_LANE_2,
PHY_LANE_CK,
},
- .unsupported_odd_h_timings = true,
+ .unsupported_odd_h_timings = false,
.external_irq_controller = true,
.init_resources = vc5_hdmi_init_resources,
--- a/drivers/gpu/drm/vc4/vc4_regs.h
+++ b/drivers/gpu/drm/vc4/vc4_regs.h
@@ -155,6 +155,7 @@
# define PV_CONTROL_EN BIT(0)
#define PV_V_CONTROL 0x04
+# define PV_VCONTROL_ODD_TIMING BIT(29)
# define PV_VCONTROL_ODD_DELAY_MASK VC4_MASK(22, 6)
# define PV_VCONTROL_ODD_DELAY_SHIFT 6
# define PV_VCONTROL_ODD_FIRST BIT(5)