ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-27 01:11:14 +00:00
Code Issues Actions 4 Packages Projects Releases Wiki Activity
3b27974c7a
openwrt/target/linux/brcm47xx/patches-3.6/750-bgmac.patch

1681 lines
53 KiB
Diff
Raw Normal View History

brcm47xx: add bgmac driver This Ethernet driver is in early development stage and still has some problems. This was working on my bcm4716 based device. Thanks to Rafał Miłecki <zajec5@gmail.com> for writing this driver. SVN-Revision: 34995
2013-01-03 02:05:22 +00:00
--- a/drivers/bcma/driver_chipcommon_pmu.c
+++ b/drivers/bcma/driver_chipcommon_pmu.c
@@ -263,7 +263,7 @@ static u32 bcma_pmu_pll_clock_bcm4706(st
}
/* query bus clock frequency for PMU-enabled chipcommon */
-static u32 bcma_pmu_get_bus_clock(struct bcma_drv_cc *cc)
+u32 bcma_pmu_get_bus_clock(struct bcma_drv_cc *cc)
{
struct bcma_bus *bus = cc->core->bus;
@@ -292,6 +292,7 @@ static u32 bcma_pmu_get_bus_clock(struct
}
return BCMA_CC_PMU_HT_CLOCK;
}
+EXPORT_SYMBOL_GPL(bcma_pmu_get_bus_clock);
/* query cpu clock frequency for PMU-enabled chipcommon */
u32 bcma_pmu_get_cpu_clock(struct bcma_drv_cc *cc)
--- a/drivers/net/ethernet/broadcom/Kconfig
+++ b/drivers/net/ethernet/broadcom/Kconfig
@@ -120,4 +120,10 @@ config BNX2X
To compile this driver as a module, choose M here: the module
will be called bnx2x. This is recommended.
+config BGMAC
+ tristate "Broadcom Gigabit driver"
+ depends on BCMA
+ ---help---
+ This driver supports Broadcom Gigabit core found in some BCM47xx SoCs.
+
endif # NET_VENDOR_BROADCOM
--- a/drivers/net/ethernet/broadcom/Makefile
+++ b/drivers/net/ethernet/broadcom/Makefile
@@ -9,3 +9,4 @@ obj-$(CONFIG_CNIC) += cnic.o
obj-$(CONFIG_BNX2X) += bnx2x/
obj-$(CONFIG_SB1250_MAC) += sb1250-mac.o
obj-$(CONFIG_TIGON3) += tg3.o
+obj-$(CONFIG_BGMAC) += bgmac.o
--- /dev/null
+++ b/drivers/net/ethernet/broadcom/bgmac.c
@@ -0,0 +1,1202 @@
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#define bgmac_err(bgmac, fmt, ...) \
+ pr_err("u%d: " fmt, (bgmac)->core->core_unit, ##__VA_ARGS__)
+#define bgmac_warn(bgmac, fmt, ...) \
+ pr_warn("u%d: " fmt, (bgmac)->core->core_unit, ##__VA_ARGS__)
+#define bgmac_info(bgmac, fmt, ...) \
+ pr_info("u%d: " fmt, (bgmac)->core->core_unit, ##__VA_ARGS__)
+#define bgmac_debug(bgmac, fmt, ...) \
+ pr_debug("u%d: " fmt, (bgmac)->core->core_unit, ##__VA_ARGS__)
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/etherdevice.h>
+#include <linux/mii.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <bcm47xx_nvram.h>
+
+#include "bgmac.h"
+
+#define ETHER_MAX_LEN 1518
+
+MODULE_LICENSE("GPL");
+
+static const struct bcma_device_id bgmac_bcma_tbl[] = {
+ BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_4706_MAC_GBIT, BCMA_ANY_REV, BCMA_ANY_CLASS),
+ BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_MAC_GBIT, BCMA_ANY_REV, BCMA_ANY_CLASS),
+ BCMA_CORETABLE_END
+};
+MODULE_DEVICE_TABLE(bcma, bgmac_bcma_tbl);
+
+static bool bgmac_wait_value(struct bcma_device *core, u16 reg, u32 mask,
+ u32 value, int timeout)
+{
+ u32 val;
+ int i;
+
+ for (i = 0; i < timeout / 10; i++) {
+ val = bcma_read32(core, reg);
+ if ((val & mask) == value)
+ return true;
+ udelay(10);
+ }
+ pr_err("Timeout waiting for reg 0x%X\n", reg);
+ return false;
+}
+
+/**************************************************
+ * DMA
+ **************************************************/
+
+static void bgmac_dma_tx_reset(struct bgmac *bgmac, struct bgmac_dma_ring *ring)
+{
+ u32 val;
+ int i;
+
+ if (!ring->mmio_base)
+ return;
+
+ /* Susend DMA TX ring first.
+ * bgmac_wait_value doesn't support waiting for any of few values, so
+ * implement whole loop here.
+ */
+ bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_CTL,
+ BGMAC_DMA_TX_SUSPEND);
+ for (i = 0; i < 10000 / 10; i++) {
+ val = bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_TX_STATUS);
+ if (val == BGMAC_DMA_TX_STAT_DISABLED ||
+ val == BGMAC_DMA_TX_STAT_IDLEWAIT ||
+ val == BGMAC_DMA_TX_STAT_STOPPED) {
+ i = 0;
+ break;
+ }
+ udelay(10);
+ }
+ if (i)
+ bgmac_err(bgmac, "Timeout suspending DMA TX ring 0x%X\n", ring->mmio_base);
+
+ /* Remove SUSPEND bit */
+ bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_CTL, 0);
+ if (!bgmac_wait_value(bgmac->core,
+ ring->mmio_base + BGMAC_DMA_TX_STATUS,
+ BGMAC_DMA_TX_STAT, BGMAC_DMA_TX_STAT_DISABLED,
+ 10000)) {
+ bgmac_warn(bgmac, "DMA TX ring 0x%X wasn't disabled on time, waiting additional 300us\n", ring->mmio_base);
+ udelay(300);
+ val = bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_TX_STATUS);
+ if ((val & BGMAC_DMA_TX_STAT) != BGMAC_DMA_TX_STAT_DISABLED)
+ bgmac_err(bgmac, "Reset of DMA TX ring 0x%X failed\n", ring->mmio_base);
+ }
+}
+
+static void bgmac_dma_tx_enable(struct bgmac *bgmac,
+ struct bgmac_dma_ring *ring)
+{
+ u32 ctl;
+
+ ctl = bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_TX_CTL);
+ ctl |= BGMAC_DMA_TX_ENABLE;
+ ctl |= BGMAC_DMA_TX_PARITY_DISABLE;
+ bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_CTL, ctl);
+}
+
+static netdev_tx_t bgmac_dma_tx_add(struct bgmac *bgmac,
+ struct bgmac_dma_ring *ring,
+ struct sk_buff *skb)
+{
+ struct device *dma_dev = bgmac->core->dma_dev;
+ struct bgmac_dma_desc *dma_desc;
+ struct bgmac_slot_info *slot;
+ u32 ctl0, ctl1;
+ int free_slots;
+
+ if (skb->len > BGMAC_DESC_CTL1_LEN) {
+ bgmac_err(bgmac, "Too long skb (%d)\n", skb->len);
+ return NETDEV_TX_BUSY;
+ }
+
+ if (ring->start <= ring->end)
+ free_slots = ring->start - ring->end + BGMAC_TX_RING_SLOTS;
+ else
+ free_slots = ring->start - ring->end;
+ if (free_slots <= 1) {
+ bgmac_err(bgmac, "No free slots on ring 0x%X!\n", ring->mmio_base);
+ netif_stop_queue(bgmac->net_dev);
+ return NETDEV_TX_BUSY;
+ }
+
+ slot = &ring->slots[ring->end];
+ slot->skb = skb;
+ slot->dma_addr = dma_map_single(dma_dev, skb->data, skb->len, DMA_TO_DEVICE);
+ if (dma_mapping_error(dma_dev, slot->dma_addr)) {
+ bgmac_err(bgmac, "Mapping error of skb on ring 0x%X\n", ring->mmio_base);
+ return NETDEV_TX_BUSY;
+ }
+
+ ctl0 = BGMAC_DESC_CTL0_IOC | BGMAC_DESC_CTL0_SOF | BGMAC_DESC_CTL0_EOF;
+ if (ring->end == ring->num_slots - 1)
+ ctl0 |= BGMAC_DESC_CTL0_EOT;
+ ctl1 = skb->len & BGMAC_DESC_CTL1_LEN;
+
+ dma_desc = ring->cpu_base;
+ dma_desc += ring->end;
+ dma_desc->addr_low = cpu_to_le32(lower_32_bits(slot->dma_addr));
+ dma_desc->addr_high = cpu_to_le32(upper_32_bits(slot->dma_addr));
+ dma_desc->ctl0 = cpu_to_le32(ctl0);
+ dma_desc->ctl1 = cpu_to_le32(ctl1);
+
+ wmb();
+
+ /* Increase ring->end to point empty slot. We tell hardware the first
+ * slot it shold *not* read.
+ */
+ if (++ring->end >= BGMAC_TX_RING_SLOTS)
+ ring->end = 0;
+ bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_INDEX,
+ ring->end * sizeof(struct bgmac_dma_desc));
+
+ return NETDEV_TX_OK;
+}
+
+/* Free transmitted packets */
+static void bgmac_dma_tx_free(struct bgmac *bgmac, struct bgmac_dma_ring *ring)
+{
+ struct device *dma_dev = bgmac->core->dma_dev;
+ struct bgmac_dma_desc *dma_desc;
+ struct bgmac_slot_info *slot;
+ int empty_slot;
+
+ /* The last slot that hardware didn't consume yet */
+ empty_slot = bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_TX_STATUS);
+ empty_slot &= BGMAC_DMA_TX_STATDPTR;
+ empty_slot /= sizeof(struct bgmac_dma_desc);
+
+ while (ring->start != empty_slot) {
+ /* Set pointers */
+ dma_desc = ring->cpu_base;
+ dma_desc += ring->start;
+ slot = &ring->slots[ring->start];
+
+ if (slot->skb) {
+ /* Unmap no longer used buffer */
+ dma_unmap_single(dma_dev, slot->dma_addr,
+ slot->skb->len, DMA_TO_DEVICE);
+ slot->dma_addr = 0;
+
+ /* Free memory! */
+ dev_kfree_skb_any(slot->skb);
+ slot->skb = NULL;
+ } else {
+ bgmac_err(bgmac, "Hardware reported transmission for empty TX ring slot %d! End of ring: %d", ring->start, ring->end);
+ }
+
+ if (++ring->start >= BGMAC_TX_RING_SLOTS)
+ ring->start = 0;
+ }
+}
+
+static void bgmac_dma_rx_reset(struct bgmac *bgmac, struct bgmac_dma_ring *ring)
+{
+ if (!ring->mmio_base)
+ return;
+
+ bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_RX_CTL, 0);
+ if (!bgmac_wait_value(bgmac->core,
+ ring->mmio_base + BGMAC_DMA_RX_STATUS,
+ BGMAC_DMA_RX_STAT, BGMAC_DMA_RX_STAT_DISABLED,
+ 10000))
+ bgmac_err(bgmac, "Reset of ring 0x%X RX failed\n", ring->mmio_base);
+}
+
+static void bgmac_dma_rx_enable(struct bgmac *bgmac,
+ struct bgmac_dma_ring *ring)
+{
+ u32 ctl;
+
+ ctl = bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_RX_CTL);
+ ctl &= BGMAC_DMA_RX_ADDREXT_MASK;
+ ctl |= BGMAC_DMA_RX_ENABLE;
+ ctl |= BGMAC_DMA_RX_PARITY_DISABLE;
+ ctl |= BGMAC_DMA_RX_OVERFLOW_CONT;
+ ctl |= BGMAC_RX_FRAME_OFFSET << BGMAC_DMA_RX_FRAME_OFFSET_SHIFT;
+ bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_RX_CTL, ctl);
+}
+
+static void bgmac_dma_rx_skb_for_slot(struct bgmac *bgmac,
+ struct bgmac_slot_info *slot)
+{
+ struct device *dma_dev = bgmac->core->dma_dev;
+ struct bgmac_rx_header *rx;
+
+ /* Alloc skb */
+ slot->skb = netdev_alloc_skb(bgmac->net_dev, BGMAC_RX_BUF_SIZE);
+ if (!slot->skb)
+ bgmac_err(bgmac, "Allocation of skb failed!\n");
+
+ /* Poison - if everything goes fine, hardware will overwrite it */
+ rx = (struct bgmac_rx_header *)slot->skb->data;
+ rx->len = cpu_to_le16(0xdead);
+ rx->flags = cpu_to_le16(0xbeef);
+
+ /* Map skb for the DMA */
+ slot->dma_addr = dma_map_single(dma_dev, slot->skb->data,
+ BGMAC_RX_BUF_SIZE, DMA_FROM_DEVICE);
+ if (dma_mapping_error(dma_dev, slot->dma_addr))
+ bgmac_err(bgmac, "DMA mapping error\n");
+ if (slot->dma_addr & 0xC0000000)
+ bgmac_warn(bgmac, "DMA address using 0xC0000000 bit(s), it may need translation trick\n");
+}
+
+static void bgmac_dma_rx_read(struct bgmac *bgmac, struct bgmac_dma_ring *ring)
+{
+ struct device *dma_dev = bgmac->core->dma_dev;
+ struct bgmac_dma_desc *dma_desc;
+ struct bgmac_slot_info *slot;
+ struct sk_buff *skb;
+ struct bgmac_rx_header *rx;
+ u32 end_slot;
+ u16 len, flags;
+
+ end_slot = bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_RX_STATUS);
+ end_slot &= BGMAC_DMA_RX_STATDPTR;
+ end_slot /= sizeof(struct bgmac_dma_desc);
+
+ ring->end = end_slot;
+
+ while (ring->start != ring->end) {
+ /* Set pointers */
+ dma_desc = ring->cpu_base;
+ dma_desc += ring->start;
+ slot = &ring->slots[ring->start];
+ skb = slot->skb;
+
+ /* Unmap buffer to make it accessible to the CPU */
+ dma_unmap_single(dma_dev, slot->dma_addr, BGMAC_RX_BUF_SIZE,
+ DMA_FROM_DEVICE);
+
+ /* Get info from the header */
+ rx = (struct bgmac_rx_header *)skb->data;
+ len = le16_to_cpu(rx->len);
+ flags = le16_to_cpu(rx->flags);
+
+ /* Check for poison and drop or pass packet */
+ if (len == 0xdead && flags == 0xbeef) {
+ bgmac_err(bgmac, "Found poisoned packet at slot %d, DMA issue!\n", ring->start);
+ dev_kfree_skb_any(skb);
+ } else {
+ /* Remove header from the skb and pass it to the net */
+ skb_put(skb, BGMAC_RX_FRAME_OFFSET + len);
+ skb_pull(skb, BGMAC_RX_FRAME_OFFSET);
+ skb->protocol = eth_type_trans(skb, bgmac->net_dev);
+ netif_receive_skb(skb);
+ }
+
+ /* Alloc new skb */
+ bgmac_dma_rx_skb_for_slot(bgmac, slot);
+ dma_desc->addr_low = cpu_to_le32(lower_32_bits(slot->dma_addr));
+ dma_desc->addr_high = cpu_to_le32(upper_32_bits(slot->dma_addr));
+
+ if (++ring->start >= BGMAC_RX_RING_SLOTS)
+ ring->start = 0;
+ }
+}
+
+/* Does ring support unaligned addressing? */
+static bool bgmac_dma_unaligned(struct bgmac *bgmac,
+ struct bgmac_dma_ring *ring)
+{
+ if (ring->tx) {
+ bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_RINGLO,
+ 0xff0);
+ if (bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_TX_RINGLO))
+ return true;
+ } else {
+ bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_RX_RINGLO,
+ 0xff0);
+ if (bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_RX_RINGLO))
+ return true;
+ }
+ return false;
+}
+
+static int bgmac_dma_alloc(struct bgmac *bgmac)
+{
+ struct device *dma_dev = bgmac->core->dma_dev;
+ struct bgmac_dma_ring *ring;
+ u16 ring_base[] = { BGMAC_DMA_BASE0, BGMAC_DMA_BASE1, BGMAC_DMA_BASE2,
+ BGMAC_DMA_BASE3, };
+ int size; /* ring size: different for Tx and Rx */
+ int i;
+
+ BUILD_BUG_ON(BGMAC_MAX_TX_RINGS > ARRAY_SIZE(ring_base));
+ BUILD_BUG_ON(BGMAC_MAX_RX_RINGS > ARRAY_SIZE(ring_base));
+
+ if (!(bcma_aread32(bgmac->core, BCMA_IOST) & BCMA_IOST_DMA64)) {
+ bgmac_err(bgmac, "Core does not report 64-bit DMA\n");
+ return -ENOTSUPP;
+ }
+
+ for (i = 0; i < BGMAC_MAX_TX_RINGS; i++) {
+ ring = &bgmac->tx_ring[i];
+ ring->tx = true;
+ ring->num_slots = BGMAC_TX_RING_SLOTS;
+ ring->mmio_base = ring_base[i];
+ if (bgmac_dma_unaligned(bgmac, ring))
+ bgmac_warn(bgmac, "TX on ring 0x%X supports unaligned addressing but this feature is not implemented\n", ring->mmio_base);
+
+ /* Alloc ring of descriptors */
+ size = ring->num_slots * sizeof(struct bgmac_dma_desc);
+ ring->cpu_base = dma_zalloc_coherent(dma_dev, size,
+ &(ring->dma_base),
+ GFP_KERNEL);
+ if (!ring->cpu_base)
+ bgmac_err(bgmac, "Allocation of TX ring failed\n");
+ if (ring->dma_base & 0xC0000000)
+ bgmac_warn(bgmac, "DMA address using 0xC0000000 bit(s), it may need translation trick\n");
+
+ /* No need to alloc TX slots yet */
+ }
+
+ for (i = 0; i < BGMAC_MAX_RX_RINGS; i++) {
+ ring = &bgmac->rx_ring[i];
+ ring->tx = false;
+ ring->num_slots = BGMAC_RX_RING_SLOTS;
+ ring->mmio_base = ring_base[i];
+ if (bgmac_dma_unaligned(bgmac, ring))
+ bgmac_warn(bgmac, "RX on ring 0x%X supports unaligned addressing but this feature is not implemented\n", ring->mmio_base);
+
+ /* Alloc ring of descriptors */
+ size = ring->num_slots * sizeof(struct bgmac_dma_desc);
+ ring->cpu_base = dma_zalloc_coherent(dma_dev, size,
+ &(ring->dma_base),
+ GFP_KERNEL);
+ if (!ring->cpu_base)
+ bgmac_err(bgmac, "Allocation of RX ring failed\n");
+ if (ring->dma_base & 0xC0000000)
+ bgmac_warn(bgmac, "DMA address using 0xC0000000 bit(s), it may need translation trick\n");
+
+ /* Alloc RX slots */
+ for (i = 0; i < ring->num_slots; i++)
+ bgmac_dma_rx_skb_for_slot(bgmac, &ring->slots[i]);
+ }
+
+ return 0;
+}
+
+static void bgmac_dma_init(struct bgmac *bgmac)
+{
+ struct bgmac_dma_ring *ring;
+ struct bgmac_dma_desc *dma_desc;
+ u32 ctl0, ctl1;
+ int i;
+
+ for (i = 0; i < BGMAC_MAX_TX_RINGS; i++) {
+ ring = &bgmac->tx_ring[i];
+
+ /* We don't implement unaligned addressing, so enable first */
+ bgmac_dma_tx_enable(bgmac, ring);
+ bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_RINGLO,
+ lower_32_bits(ring->dma_base));
+ bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_RINGHI,
+ upper_32_bits(ring->dma_base));
+
+ ring->start = 0;
+ ring->end = 0; /* Points the slot that should *not* be read */
+ }
+
+ for (i = 0; i < BGMAC_MAX_RX_RINGS; i++) {
+ ring = &bgmac->rx_ring[i];
+
+ /* We don't implement unaligned addressing, so enable first */
+ bgmac_dma_rx_enable(bgmac, ring);
+ bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_RX_RINGLO,
+ lower_32_bits(ring->dma_base));
+ bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_RX_RINGHI,
+ upper_32_bits(ring->dma_base));
+
+ for (i = 0, dma_desc = ring->cpu_base; i < ring->num_slots;
+ i++, dma_desc++) {
+ ctl0 = ctl1 = 0;
+
+ if (i == ring->num_slots - 1)
+ ctl0 |= BGMAC_DESC_CTL0_EOT;
+ ctl1 |= BGMAC_RX_BUF_SIZE & BGMAC_DESC_CTL1_LEN;
+ /* Is there any BGMAC device that requires extension? */
+ /* ctl1 |= (addrext << B43_DMA64_DCTL1_ADDREXT_SHIFT) &
+ * B43_DMA64_DCTL1_ADDREXT_MASK;
+ */
+
+ dma_desc->addr_low = cpu_to_le32(lower_32_bits(ring->slots[i].dma_addr));
+ dma_desc->addr_high = cpu_to_le32(upper_32_bits(ring->slots[i].dma_addr));
+ dma_desc->ctl0 = cpu_to_le32(ctl0);
+ dma_desc->ctl1 = cpu_to_le32(ctl1);
+ }
+
+ bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_RX_INDEX,
+ ring->num_slots * sizeof(struct bgmac_dma_desc));
+
+ ring->start = 0;
+ ring->end = 0;
+ }
+}
+
+/**************************************************
+ * PHY ops
+ **************************************************/
+
+u16 bgmac_phy_read(struct bgmac *bgmac, u8 phyaddr, u8 reg)
+{
+ struct bcma_device *core;
+ u16 phy_access_addr;
+ u16 phy_ctl_addr;
+ u32 tmp;
+
+ BUILD_BUG_ON(BGMAC_PA_DATA_MASK != BCMA_GMAC_CMN_PA_DATA_MASK);
+ BUILD_BUG_ON(BGMAC_PA_ADDR_MASK != BCMA_GMAC_CMN_PA_ADDR_MASK);
+ BUILD_BUG_ON(BGMAC_PA_ADDR_SHIFT != BCMA_GMAC_CMN_PA_ADDR_SHIFT);
+ BUILD_BUG_ON(BGMAC_PA_REG_MASK != BCMA_GMAC_CMN_PA_REG_MASK);
+ BUILD_BUG_ON(BGMAC_PA_REG_SHIFT != BCMA_GMAC_CMN_PA_REG_SHIFT);
+ BUILD_BUG_ON(BGMAC_PA_WRITE != BCMA_GMAC_CMN_PA_WRITE);
+ BUILD_BUG_ON(BGMAC_PA_START != BCMA_GMAC_CMN_PA_START);
+ BUILD_BUG_ON(BGMAC_PC_EPA_MASK != BCMA_GMAC_CMN_PC_EPA_MASK);
+ BUILD_BUG_ON(BGMAC_PC_MCT_MASK != BCMA_GMAC_CMN_PC_MCT_MASK);
+ BUILD_BUG_ON(BGMAC_PC_MCT_SHIFT != BCMA_GMAC_CMN_PC_MCT_SHIFT);
+ BUILD_BUG_ON(BGMAC_PC_MTE != BCMA_GMAC_CMN_PC_MTE);
+
+ if (bgmac->core->id.id == BCMA_CORE_4706_MAC_GBIT) {
+ core = bgmac->core->bus->drv_gmac_cmn.core;
+ phy_access_addr = BCMA_GMAC_CMN_PHY_ACCESS;
+ phy_ctl_addr = BCMA_GMAC_CMN_PHY_CTL;
+ } else {
+ core = bgmac->core;
+ phy_access_addr = BGMAC_PHY_ACCESS;
+ phy_ctl_addr = BGMAC_PHY_CNTL;
+ }
+
+ tmp = bcma_read32(core, phy_ctl_addr);
+ tmp &= ~BGMAC_PC_EPA_MASK;
+ tmp |= phyaddr;
+ bcma_write32(core, phy_ctl_addr, tmp);
+
+ tmp = BGMAC_PA_START;
+ tmp |= phyaddr << BGMAC_PA_ADDR_SHIFT;
+ tmp |= reg << BGMAC_PA_REG_SHIFT;
+ bcma_write32(core, phy_access_addr, tmp);
+
+ if (!bgmac_wait_value(core, phy_access_addr, BGMAC_PA_START, 0, 1000)) {
+ bgmac_err(bgmac, "Reading PHY %d register 0x%X failed\n",
+ phyaddr, reg);
+ return 0xffff;
+ }
+
+ return bcma_read32(core, phy_access_addr) & BGMAC_PA_DATA_MASK;
+}
+
+/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphywr */
+void bgmac_phy_write(struct bgmac *bgmac, u8 phyaddr, u8 reg, u16 value)
+{
+ struct bcma_device *core;
+ u16 phy_access_addr;
+ u16 phy_ctl_addr;
+ u32 tmp;
+
+ if (bgmac->core->id.id == BCMA_CORE_4706_MAC_GBIT) {
+ core = bgmac->core->bus->drv_gmac_cmn.core;
+ phy_access_addr = BCMA_GMAC_CMN_PHY_ACCESS;
+ phy_ctl_addr = BCMA_GMAC_CMN_PHY_CTL;
+ } else {
+ core = bgmac->core;
+ phy_access_addr = BGMAC_PHY_ACCESS;
+ phy_ctl_addr = BGMAC_PHY_CNTL;
+ }
+
+ tmp = bcma_read32(core, phy_ctl_addr);
+ tmp &= ~BGMAC_PC_EPA_MASK;
+ tmp |= phyaddr;
+ bcma_write32(core, phy_ctl_addr, tmp);
+
+ bgmac_write(bgmac, BGMAC_INT_STATUS, BGMAC_IS_MDIO);
+ if (bgmac_read(bgmac, BGMAC_INT_STATUS) & BGMAC_IS_MDIO)
+ bgmac_warn(bgmac, "Error setting MDIO int\n");
+
+ tmp = BGMAC_PA_START;
+ tmp |= BGMAC_PA_WRITE;
+ tmp |= phyaddr << BGMAC_PA_ADDR_SHIFT;
+ tmp |= reg << BGMAC_PA_REG_SHIFT;
+ tmp |= value;
+ bcma_write32(core, phy_access_addr, tmp);
+
+ if (!bgmac_wait_value(core, phy_access_addr, BGMAC_PA_START, 0, 1000))
+ bgmac_err(bgmac, "Writing to PHY %d register 0x%X failed\n",
+ phyaddr, reg);
+}
+
+/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphyforce */
+static void bgmac_phy_force(struct bgmac *bgmac)
+{
+ u16 ctl;
+ u16 mask = ~(BGMAC_PHY_CTL_SPEED | BGMAC_PHY_CTL_SPEED_MSB |
+ BGMAC_PHY_CTL_ANENAB | BGMAC_PHY_CTL_DUPLEX);
+
+ if (bgmac->phyaddr == BGMAC_PHY_NOREGS)
+ return;
+
+ if (bgmac->autoneg)
+ return;
+
+ ctl = bgmac_phy_read(bgmac, bgmac->phyaddr, BGMAC_PHY_CTL);
+ ctl &= mask;
+ if (bgmac->full_duplex)
+ ctl |= BGMAC_PHY_CTL_DUPLEX;
+ if (bgmac->speed == BGMAC_SPEED_100)
+ ctl |= BGMAC_PHY_CTL_SPEED_100;
+ else if (bgmac->speed == BGMAC_SPEED_1000)
+ ctl |= BGMAC_PHY_CTL_SPEED_1000;
+ bgmac_phy_write(bgmac, bgmac->phyaddr, BGMAC_PHY_CTL, ctl);
+}
+
+/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphyadvertise */
+static void bgmac_phy_advertise(struct bgmac *bgmac)
+{
+ u16 adv;
+
+ if (bgmac->phyaddr == BGMAC_PHY_NOREGS)
+ return;
+
+ if (bgmac->autoneg)
+ return;
+
+ /* Adv selected 10/100 speeds */
+ adv = bgmac_phy_read(bgmac, bgmac->phyaddr, BGMAC_PHY_ADV);
+ adv &= ~(BGMAC_PHY_ADV_10HALF | BGMAC_PHY_ADV_10FULL |
+ BGMAC_PHY_ADV_100HALF | BGMAC_PHY_ADV_100FULL);
+ if (!bgmac->full_duplex && bgmac->speed & BGMAC_SPEED_10)
+ adv |= BGMAC_PHY_ADV_10HALF;
+ if (!bgmac->full_duplex && bgmac->speed & BGMAC_SPEED_100)
+ adv |= BGMAC_PHY_ADV_100HALF;
+ if (bgmac->full_duplex && bgmac->speed & BGMAC_SPEED_10)
+ adv |= BGMAC_PHY_ADV_10FULL;
+ if (bgmac->full_duplex && bgmac->speed & BGMAC_SPEED_100)
+ adv |= BGMAC_PHY_ADV_100FULL;
+ bgmac_phy_write(bgmac, bgmac->phyaddr, BGMAC_PHY_ADV, adv);
+
+ /* Adv selected 1000 speeds */
+ adv = bgmac_phy_read(bgmac, bgmac->phyaddr, BGMAC_PHY_ADV2);
+ adv &= ~(BGMAC_PHY_ADV2_1000HALF | BGMAC_PHY_ADV2_1000FULL);
+ if (!bgmac->full_duplex && bgmac->speed & BGMAC_SPEED_1000)
+ adv |= BGMAC_PHY_ADV2_1000HALF;
+ if (bgmac->full_duplex && bgmac->speed & BGMAC_SPEED_1000)
+ adv |= BGMAC_PHY_ADV2_1000FULL;
+ bgmac_phy_write(bgmac, bgmac->phyaddr, BGMAC_PHY_ADV2, adv);
+
+ /* Restart */
+ bgmac_phy_write(bgmac, bgmac->phyaddr, BGMAC_PHY_CTL,
+ bgmac_phy_read(bgmac, bgmac->phyaddr, BGMAC_PHY_CTL) |
+ BGMAC_PHY_CTL_RESTART);
+}
+
+/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphyinit */
+static void bgmac_phy_init(struct bgmac *bgmac)
+{
+ struct bcma_chipinfo *ci = &bgmac->core->bus->chipinfo;
+ struct bcma_drv_cc *cc = &bgmac->core->bus->drv_cc;
+ u8 i;
+
+ if (ci->id == BCMA_CHIP_ID_BCM5356) {
+ for (i = 0; i < 5; i++) {
+ bgmac_phy_write(bgmac, i, 0x1f, 0x008b);
+ bgmac_phy_write(bgmac, i, 0x15, 0x0100);
+ bgmac_phy_write(bgmac, i, 0x1f, 0x000f);
+ bgmac_phy_write(bgmac, i, 0x12, 0x2aaa);
+ bgmac_phy_write(bgmac, i, 0x1f, 0x000b);
+ }
+ }
+ if ((ci->id == BCMA_CHIP_ID_BCM5357 && ci->pkg != 10) ||
+ (ci->id == BCMA_CHIP_ID_BCM4749 && ci->pkg != 10) ||
+ (ci->id == BCMA_CHIP_ID_BCM53572 && ci->pkg != 9)) {
+ bcma_chipco_chipctl_maskset(cc, 2, ~0xc0000000, 0);
+ bcma_chipco_chipctl_maskset(cc, 4, ~0x80000000, 0);
+ for (i = 0; i < 5; i++) {
+ bgmac_phy_write(bgmac, i, 0x1f, 0x000f);
+ bgmac_phy_write(bgmac, i, 0x16, 0x5284);
+ bgmac_phy_write(bgmac, i, 0x1f, 0x000b);
+ bgmac_phy_write(bgmac, i, 0x17, 0x0010);
+ bgmac_phy_write(bgmac, i, 0x1f, 0x000f);
+ bgmac_phy_write(bgmac, i, 0x16, 0x5296);
+ bgmac_phy_write(bgmac, i, 0x17, 0x1073);
+ bgmac_phy_write(bgmac, i, 0x17, 0x9073);
+ bgmac_phy_write(bgmac, i, 0x16, 0x52b6);
+ bgmac_phy_write(bgmac, i, 0x17, 0x9273);
+ bgmac_phy_write(bgmac, i, 0x1f, 0x000b);
+ }
+ }
+}
+
+/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphyreset */
+static void bgmac_phy_reset(struct bgmac *bgmac)
+{
+ if (bgmac->phyaddr == BGMAC_PHY_NOREGS)
+ return;
+
+ bgmac_phy_write(bgmac, bgmac->phyaddr, BGMAC_PHY_CTL,
+ BGMAC_PHY_CTL_RESET);
+ udelay(100);
+ if (bgmac_phy_read(bgmac, bgmac->phyaddr, BGMAC_PHY_CTL) &
+ BGMAC_PHY_CTL_RESET)
+ bgmac_err(bgmac, "PHY reset failed\n");
+ bgmac_phy_init(bgmac);
+}
+
+/**************************************************
+ * Chip ops
+ **************************************************/
+
+/* TODO: can we just drop @force? Can we don't reset MAC at all if there is
+ * nothing to change? Try if after stabilizng driver.
+ */
+static void bgmac_cmdcfg_maskset(struct bgmac *bgmac, u32 mask, u32 set,
+ bool force)
+{
+ u32 cmdcfg = bgmac_read(bgmac, BGMAC_CMDCFG);
+ u32 new_val = (cmdcfg & mask) | set;
+
+ bgmac_set(bgmac, BGMAC_CMDCFG, BGMAC_CMDCFG_SR);
+ udelay(2);
+
+ if (new_val != cmdcfg || force)
+ bgmac_write(bgmac, BGMAC_CMDCFG, new_val);
+
+ bgmac_mask(bgmac, BGMAC_CMDCFG, ~BGMAC_CMDCFG_SR);
+ udelay(2);
+}
+
+static void bgmac_chip_stats_update(struct bgmac *bgmac)
+{
+ int i;
+
+ if (bgmac->core->id.id != BCMA_CORE_4706_MAC_GBIT) {
+ for (i = 0; i < BGMAC_NUM_MIB_TX_REGS; i++)
+ bgmac->mib_tx_regs[i] =
+ bgmac_read(bgmac,
+ BGMAC_TX_GOOD_OCTETS + (i * 4));
+ for (i = 0; i < BGMAC_NUM_MIB_RX_REGS; i++)
+ bgmac->mib_rx_regs[i] =
+ bgmac_read(bgmac,
+ BGMAC_RX_GOOD_OCTETS + (i * 4));
+ }
+
+ /* TODO: what else? how to handle BCM4706? */
+}
+
+static void bgmac_clear_mib(struct bgmac *bgmac)
+{
+ int i;
+
+ if (bgmac->core->id.id == BCMA_CORE_4706_MAC_GBIT)
+ return;
+
+ bgmac_set(bgmac, BGMAC_DEV_CTL, BGMAC_DC_MROR);
+ for (i = 0; i < BGMAC_NUM_MIB_TX_REGS; i++)
+ bgmac_read(bgmac, BGMAC_TX_GOOD_OCTETS + (i * 4));
+ for (i = 0; i < BGMAC_NUM_MIB_RX_REGS; i++)
+ bgmac_read(bgmac, BGMAC_RX_GOOD_OCTETS + (i * 4));
+}
+
+/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/gmac_speed */
+static void bgmac_speed(struct bgmac *bgmac, int speed)
+{
+ u32 mask = ~(BGMAC_CMDCFG_ES_MASK | BGMAC_CMDCFG_HD);
+ u32 set = 0;
+
+ if (speed & BGMAC_SPEED_10)
+ set |= BGMAC_CMDCFG_ES_10;
+ if (speed & BGMAC_SPEED_100)
+ set |= BGMAC_CMDCFG_ES_100;
+ if (speed & BGMAC_SPEED_1000)
+ set |= BGMAC_CMDCFG_ES_1000;
+ if (!bgmac->full_duplex)
+ set |= BGMAC_CMDCFG_HD;
+ bgmac_cmdcfg_maskset(bgmac, mask, set, true);
+}
+
+static void bgmac_miiconfig(struct bgmac *bgmac)
+{
+ u8 imode = (bgmac_read(bgmac, BGMAC_DEV_STATUS) & BGMAC_DS_MM_MASK) >>
+ BGMAC_DS_MM_SHIFT;
+ if (imode == 0 || imode == 1) {
+ if (bgmac->autoneg)
+ bgmac_speed(bgmac, BGMAC_SPEED_100);
+ else
+ bgmac_speed(bgmac, bgmac->speed);
+ }
+}
+
+/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipreset */
+static void bgmac_chip_reset(struct bgmac *bgmac)
+{
+ struct bcma_device *core = bgmac->core;
+ struct bcma_bus *bus = core->bus;
+ struct bcma_chipinfo *ci = &bus->chipinfo;
+ u32 flags = 0;
+ u32 iost;
+ int i;
+
+ if (bcma_core_is_enabled(core)) {
+ if (!bgmac->stats_grabbed) {
+ bgmac_chip_stats_update(bgmac);
+ bgmac->stats_grabbed = true;
+ }
+
+ for (i = 0; i < BGMAC_MAX_TX_RINGS; i++)
+ bgmac_dma_tx_reset(bgmac, &bgmac->tx_ring[i]);
+
+ bgmac_cmdcfg_maskset(bgmac, ~0, BGMAC_CMDCFG_ML, false);
+ udelay(1);
+
+ for (i = 0; i < BGMAC_MAX_RX_RINGS; i++)
+ bgmac_dma_rx_reset(bgmac, &bgmac->rx_ring[i]);
+
+ /* TODO: Clear software multicast filter list */
+ }
+
+ iost = bcma_aread32(core, BCMA_IOST);
+ if ((ci->id == BCMA_CHIP_ID_BCM5357 && ci->pkg == 10) ||
+ (ci->id == BCMA_CHIP_ID_BCM4749 && ci->pkg == 10) ||
+ (ci->id == BCMA_CHIP_ID_BCM53572 && ci->pkg == 9))
+ iost &= ~BGMAC_BCMA_IOST_ATTACHED;
+
+ if (iost & BGMAC_BCMA_IOST_ATTACHED) {
+ flags = BGMAC_BCMA_IOCTL_SW_CLKEN;
+ if (!bgmac->has_robosw)
+ flags |= BGMAC_BCMA_IOCTL_SW_RESET;
+ }
+
+ bcma_core_enable(core, flags);
+
+ if (core->id.rev > 2) {
+ bgmac_set(bgmac, BCMA_CLKCTLST, 1 << 8);
+ bgmac_wait_value(bgmac->core, BCMA_CLKCTLST, 1 << 24, 1 << 24,
+ 1000);
+ }
+
+ if (ci->id == BCMA_CHIP_ID_BCM5357 || ci->id == BCMA_CHIP_ID_BCM4749 ||
+ ci->id == BCMA_CHIP_ID_BCM53572) {
+ struct bcma_drv_cc *cc = &bgmac->core->bus->drv_cc;
+ u8 et_swtype = 0;
+ u8 sw_type = BGMAC_CHIPCTL_1_SW_TYPE_EPHY |
+ BGMAC_CHIPCTL_1_IF_TYPE_RMII;
+ char buf[2];
+ if (bcm47xx_nvram_getenv("et_swtype", buf, 1) > 0) {
+ if (kstrtou8(buf, 0, &et_swtype))
+ bgmac_err(bgmac, "Failed to parse et_swtype (%s)\n", buf);
+ et_swtype &= 0x0f;
+ et_swtype <<= 4;
+ sw_type = et_swtype;
+ } else if (ci->id == BCMA_CHIP_ID_BCM5357 && ci->pkg == 9) {
+ sw_type = BGMAC_CHIPCTL_1_SW_TYPE_EPHYRMII;
+ } else if (0) {
+ /* TODO */
+ }
+ bcma_chipco_chipctl_maskset(cc, 1,
+ ~(BGMAC_CHIPCTL_1_IF_TYPE_MASK |
+ BGMAC_CHIPCTL_1_SW_TYPE_MASK),
+ sw_type);
+ }
+
+ if (iost & BGMAC_BCMA_IOST_ATTACHED && !bgmac->has_robosw)
+ bcma_awrite32(core, BCMA_IOCTL,
+ bcma_aread32(core, BCMA_IOCTL) &
+ ~BGMAC_BCMA_IOCTL_SW_RESET);
+
+ /* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/gmac_reset
+ * Specs don't say about using BGMAC_CMDCFG_SR, but in this routine
+ * BGMAC_CMDCFG is read _after_ putting chip in a reset. So it has to
+ * be keps until taking MAC out of the reset.
+ */
+ bgmac_cmdcfg_maskset(bgmac,
+ ~(BGMAC_CMDCFG_TE |
+ BGMAC_CMDCFG_RE |
+ BGMAC_CMDCFG_RPI |
+ BGMAC_CMDCFG_TAI |
+ BGMAC_CMDCFG_HD |
+ BGMAC_CMDCFG_ML |
+ BGMAC_CMDCFG_CFE |
+ BGMAC_CMDCFG_RL |
+ BGMAC_CMDCFG_RED |
+ BGMAC_CMDCFG_PE |
+ BGMAC_CMDCFG_TPI |
+ BGMAC_CMDCFG_PAD_EN |
+ BGMAC_CMDCFG_PF),
+ BGMAC_CMDCFG_PROM |
+ BGMAC_CMDCFG_NLC |
+ BGMAC_CMDCFG_CFE |
+ BGMAC_CMDCFG_SR,
+ false);
+
+ bgmac_clear_mib(bgmac);
+ if (core->id.id == BCMA_CORE_4706_MAC_GBIT)
+ bcma_maskset32(bgmac->cmn, BCMA_GMAC_CMN_PHY_CTL, ~0,
+ BCMA_GMAC_CMN_PC_MTE);
+ else
+ bgmac_set(bgmac, BGMAC_PHY_CNTL, BGMAC_PC_MTE);
+ bgmac_miiconfig(bgmac);
+ bgmac_phy_init(bgmac);
+
+ bgmac->int_status = 0;
+}
+
+static void bgmac_chip_intrs_on(struct bgmac *bgmac)
+{
+ bgmac_write(bgmac, BGMAC_INT_MASK, bgmac->int_mask);
+}
+
+static void bgmac_chip_intrs_off(struct bgmac *bgmac)
+{
+ bgmac_write(bgmac, BGMAC_INT_MASK, 0);
+}
+
+/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/gmac_enable */
+static void bgmac_enable(struct bgmac *bgmac)
+{
+ struct bcma_chipinfo *ci = &bgmac->core->bus->chipinfo;
+ u32 cmdcfg;
+ u32 mode;
+ u32 rxq_ctl;
+ u32 fl_ctl;
+ u16 bp_clk;
+ u8 mdp;
+
+ cmdcfg = bgmac_read(bgmac, BGMAC_CMDCFG);
+ bgmac_cmdcfg_maskset(bgmac, ~(BGMAC_CMDCFG_TE | BGMAC_CMDCFG_RE),
+ BGMAC_CMDCFG_SR, true);
+ udelay(2);
+ cmdcfg |= BGMAC_CMDCFG_TE | BGMAC_CMDCFG_RE;
+ bgmac_write(bgmac, BGMAC_CMDCFG, cmdcfg);
+
+ mode = (bgmac_read(bgmac, BGMAC_DEV_STATUS) & BGMAC_DS_MM_MASK) >>
+ BGMAC_DS_MM_SHIFT;
+ if (ci->id != BCMA_CHIP_ID_BCM47162 || mode != 0)
+ bgmac_set(bgmac, BCMA_CLKCTLST, BCMA_CLKCTLST_FORCEHT);
+ if (ci->id == BCMA_CHIP_ID_BCM47162 && mode == 2)
+ bcma_chipco_chipctl_maskset(&bgmac->core->bus->drv_cc, 1, ~0,
+ BGMAC_CHIPCTL_1_RXC_DLL_BYPASS);
+
+ switch (ci->id) {
+ case BCMA_CHIP_ID_BCM5357:
+ case BCMA_CHIP_ID_BCM4749:
+ case BCMA_CHIP_ID_BCM53572:
+ case BCMA_CHIP_ID_BCM4716:
+ case BCMA_CHIP_ID_BCM47162:
+ fl_ctl = 0x03cb04cb;
+ if (ci->id == BCMA_CHIP_ID_BCM5357 ||
+ ci->id == BCMA_CHIP_ID_BCM4749 ||
+ ci->id == BCMA_CHIP_ID_BCM53572)
+ fl_ctl = 0x2300e1;
+ bgmac_write(bgmac, BGMAC_FLOW_CTL_THRESH, fl_ctl);
+ bgmac_write(bgmac, BGMAC_PAUSE_CTL, 0x27fff);
+ break;
+ }
+
+ rxq_ctl = bgmac_read(bgmac, BGMAC_RXQ_CTL);
+ rxq_ctl &= ~BGMAC_RXQ_CTL_MDP_MASK;
+ bp_clk = bcma_pmu_get_bus_clock(&bgmac->core->bus->drv_cc) / 1000000;
+ mdp = (bp_clk * 128 / 1000) - 3;
+ rxq_ctl |= (mdp << BGMAC_RXQ_CTL_MDP_SHIFT);
+ bgmac_write(bgmac, BGMAC_RXQ_CTL, rxq_ctl);
+}
+
+/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipinit */
+static void bgmac_chip_init(struct bgmac *bgmac, bool full_init)
+{
+ struct ssb_sprom *sprom = &bgmac->core->bus->sprom;
+ struct bgmac_dma_ring *ring;
+ u32 tmp;
+ u8 *mac;
+ int i;
+
+ /* 1 interrupt per received frame */
+ bgmac_write(bgmac, BGMAC_INT_RECV_LAZY, 1 << BGMAC_IRL_FC_SHIFT);
+
+ /* enable 802.3x tx flow control (honor received PAUSE frames) */
+ bgmac_cmdcfg_maskset(bgmac, ~BGMAC_CMDCFG_RPI, 0, true);
+
+ if (bgmac->net_dev->flags & IFF_PROMISC)
+ bgmac_cmdcfg_maskset(bgmac, ~0, BGMAC_CMDCFG_PROM, false);
+ else
+ bgmac_warn(bgmac, "Software filtering is not supported yet\n");
+
+ mac = bgmac->core->core_unit ? sprom->et1mac : sprom->et0mac;
+ tmp = (mac[0] << 24) | (mac[1] << 16) | (mac[2] << 8) | mac[3];
+ bgmac_write(bgmac, BGMAC_MACADDR_HIGH, tmp);
+ tmp = (mac[4] << 8) | mac[5];
+ bgmac_write(bgmac, BGMAC_MACADDR_LOW, tmp);
+ memcpy(bgmac->net_dev->dev_addr, mac, 6);
+
+ if (bgmac->loopback)
+ bgmac_cmdcfg_maskset(bgmac, ~0, BGMAC_CMDCFG_ML, true);
+ else
+ bgmac_cmdcfg_maskset(bgmac, ~BGMAC_CMDCFG_ML, 0, true);
+
+ bgmac_write(bgmac, BGMAC_RXMAX_LENGTH, 32 + ETHER_MAX_LEN);
+
+ if (!bgmac->autoneg) {
+ bgmac_speed(bgmac, bgmac->speed);
+ bgmac_phy_force(bgmac);
+ } else if (bgmac->speed) { /* if there is anything to adv */
+ bgmac_phy_advertise(bgmac);
+ }
+
+ if (full_init) {
+ bgmac_dma_init(bgmac);
+ if (1) /* FIXME: is there any case we don't want IRQs? */
+ bgmac_chip_intrs_on(bgmac);
+ } else {
+ for (i = 0; i < BGMAC_MAX_RX_RINGS; i++) {
+ ring = &bgmac->rx_ring[i];
+ bgmac_dma_rx_enable(bgmac, ring);
+ }
+ }
+
+ bgmac_enable(bgmac);
+}
+
+static irqreturn_t bgmac_interrupt(int irq, void *dev_id)
+{
+ struct bgmac *bgmac = netdev_priv(dev_id);
+
+ u32 int_status = bgmac_read(bgmac, BGMAC_INT_STATUS);
+ int_status &= bgmac->int_mask;
+
+ if (!int_status)
+ return IRQ_NONE;
+
+ /* Ack */
+ bgmac_write(bgmac, BGMAC_INT_STATUS, int_status);
+
+ /* Disable new interrupts until handling existing ones */
+ bgmac_chip_intrs_off(bgmac);
+
+ bgmac->int_status = int_status;
+
+ return IRQ_WAKE_THREAD;
+}
+
+static irqreturn_t bgmac_interrupt_thread(int irq, void *dev_id)
+{
+ struct bgmac *bgmac = netdev_priv(dev_id);
+ struct bgmac_dma_ring *ring;
+
+ if (bgmac->int_status & BGMAC_IS_TX0) {
+ ring = &bgmac->tx_ring[0];
+ bgmac_dma_tx_free(bgmac, ring);
+ bgmac->int_status &= ~BGMAC_IS_TX0;
+ }
+
+ if (bgmac->int_status & BGMAC_IS_RX) {
+ ring = &bgmac->rx_ring[0];
+ bgmac_dma_rx_read(bgmac, ring);
+ bgmac->int_status &= ~BGMAC_IS_RX;
+ }
+
+ if (bgmac->int_status) {
+ bgmac_err(bgmac, "Unknown IRQs: 0x%08X\n", bgmac->int_status);
+ bgmac->int_status = 0;
+ }
+
+ bgmac_chip_intrs_on(bgmac);
+ return IRQ_HANDLED;
+}
+
+/**************************************************
+ * net_device ops
+ **************************************************/
+
+static int bgmac_open(struct net_device *net_dev)
+{
+ struct bgmac *bgmac = netdev_priv(net_dev);
+
+ bgmac_chip_reset(bgmac);
+ /* Specs say about reclaiming rings here, but we do that in DMA init */
+ bgmac_chip_init(bgmac, true);
+
+ if (request_threaded_irq(bgmac->core->irq, bgmac_interrupt,
+ bgmac_interrupt_thread, IRQF_SHARED,
+ KBUILD_MODNAME, net_dev) < 0)
+ bgmac_err(bgmac, "IRQ request error!\n");
+
+ return 0;
+}
+
+static int bgmac_stop(struct net_device *net_dev)
+{
+ struct bgmac *bgmac = netdev_priv(net_dev);
+
+ bgmac_chip_intrs_off(bgmac);
+
+ free_irq(bgmac->core->irq, net_dev);
+
+ /* TODO */
+
+ return 0;
+}
+
+static int bgmac_ioctl(struct net_device *net_dev, struct ifreq *ifr, int cmd)
+{
+ struct bgmac *bgmac = netdev_priv(net_dev);
+ struct mii_ioctl_data *data = if_mii(ifr);
+
+ switch (cmd) {
+ case SIOCGMIIPHY:
+ data->phy_id = bgmac->phyaddr;
+ /* fallthru */
+ case SIOCGMIIREG:
+ if (!netif_running(net_dev))
+ return -EAGAIN;
+ data->val_out = bgmac_phy_read(bgmac, bgmac->phyaddr,
+ data->reg_num & 0x1f);
+ return 0;
+ case SIOCSMIIREG:
+ if (!netif_running(net_dev))
+ return -EAGAIN;
+ bgmac_phy_write(bgmac, bgmac->phyaddr, data->reg_num & 0x1f,
+ data->val_in);
+ return 0;
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static netdev_tx_t bgmac_start_xmit(struct sk_buff *skb,
+ struct net_device *net_dev)
+{
+ struct bgmac *bgmac = netdev_priv(net_dev);
+ struct bgmac_dma_ring *ring;
+
+ /* No QOS support yet */
+ ring = &bgmac->tx_ring[0];
+ return bgmac_dma_tx_add(bgmac, ring, skb);
+}
+
+static const struct net_device_ops bgmac_netdev_ops = {
+ .ndo_open = bgmac_open,
+ .ndo_stop = bgmac_stop,
+ .ndo_do_ioctl = bgmac_ioctl,
+ .ndo_start_xmit = bgmac_start_xmit,
+};
+
+/**************************************************
+ * BCMA bus ops
+ **************************************************/
+
+/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipattach */
+static int bgmac_probe(struct bcma_device *core)
+{
+ struct net_device *net_dev;
+ struct bgmac *bgmac;
+ struct ssb_sprom *sprom = &core->bus->sprom;
+ int err;
+
+ /* Allocation and references */
+ net_dev = alloc_etherdev(sizeof(*bgmac));
+ if (!net_dev)
+ return -ENOMEM;
+ net_dev->netdev_ops = &bgmac_netdev_ops;
+ net_dev->irq = core->irq;
+ bgmac = netdev_priv(net_dev);
+ bgmac->net_dev = net_dev;
+ bgmac->core = core;
+ bcma_set_drvdata(core, bgmac);
+
+ /* Defaults */
+ bgmac->autoneg = true;
+ bgmac->full_duplex = true;
+ bgmac->speed = BGMAC_SPEED_10 | BGMAC_SPEED_100 | BGMAC_SPEED_1000;
+
+ /* On BCM4706 we need common core to access PHY */
+ if (core->id.id == BCMA_CORE_4706_MAC_GBIT &&
+ !core->bus->drv_gmac_cmn.core) {
+ bgmac_err(bgmac, "GMAC CMN core not found (required for BCM4706)\n");
+ return -ENODEV;
+ }
+ bgmac->cmn = core->bus->drv_gmac_cmn.core;
+
+ bgmac->phyaddr = core->core_unit ? sprom->et1phyaddr :
+ sprom->et0phyaddr;
+ bgmac->phyaddr &= BGMAC_PHY_MASK;
+ if (bgmac->phyaddr == BGMAC_PHY_MASK) {
+ bgmac_err(bgmac, "No PHY found\n");
+ return -ENODEV;
+ }
+ bgmac_info(bgmac, "Found PHY addr: %d\n", bgmac->phyaddr);
+
+ if (core->bus->hosttype == BCMA_HOSTTYPE_PCI) {
+ bgmac_err(bgmac, "PCI setup not implemented\n");
+ return -ENOTSUPP;
+ }
+
+ bgmac_chip_reset(bgmac);
+
+ bgmac_dma_alloc(bgmac);
+
+ bgmac->int_mask = BGMAC_IS_ERRMASK | BGMAC_IS_RX | BGMAC_IS_TX_MASK;
+ if (bcm47xx_nvram_getenv("et0_no_txint", NULL, 0) > 0)
+ bgmac->int_mask &= ~BGMAC_IS_TX_MASK;
+
+ /* TODO: reset the external phy */
+ bgmac_phy_reset(bgmac);
+
+ bgmac->has_robosw = !!(core->bus->sprom.boardflags_lo &
+ BGMAC_BFL_ENETROBO);
+ if (bgmac->has_robosw)
+ bgmac_err(bgmac, "Support for Roboswitch not implemented\n");
+
+ if (core->bus->sprom.boardflags_lo & BGMAC_BFL_ENETADM)
+ bgmac_err(bgmac, "Support for ADMtek ethernet switch not implemented\n");
+
+ err = register_netdev(bgmac->net_dev);
+ if (err) {
+ bgmac_err(bgmac, "Cannot register net device\n");
+ return -ENOTSUPP;
+ }
+
+ return 0;
+}
+
+static void bgmac_remove(struct bcma_device *core)
+{
+ struct bgmac *bgmac = bcma_get_drvdata(core);
+
+ unregister_netdev(bgmac->net_dev);
+ free_netdev(bgmac->net_dev);
+ bcma_set_drvdata(core, NULL);
+}
+
+static struct bcma_driver bgmac_bcma_driver = {
+ .name = KBUILD_MODNAME,
+ .id_table = bgmac_bcma_tbl,
+ .probe = bgmac_probe,
+ .remove = bgmac_remove,
+};
+
+static int __init bgmac_init(void)
+{
+ int err;
+
+ err = bcma_driver_register(&bgmac_bcma_driver);
+ if (err)
+ return err;
+ pr_info("Broadcom 47xx GMAC driver loaded\n");
+
+ return 0;
+}
+
+static void __exit bgmac_exit(void)
+{
+ bcma_driver_unregister(&bgmac_bcma_driver);
+}
+
+module_init(bgmac_init)
+module_exit(bgmac_exit)
--- /dev/null
+++ b/drivers/net/ethernet/broadcom/bgmac.h
@@ -0,0 +1,424 @@
+#ifndef _BGMAC_H
+#define _BGMAC_H
+
+#include <linux/bcma/bcma.h>
+
+#define BGMAC_DEV_CTL 0x000
+#define BGMAC_DC_TSM 0x00000002
+#define BGMAC_DC_CFCO 0x00000004
+#define BGMAC_DC_RLSS 0x00000008
+#define BGMAC_DC_MROR 0x00000010
+#define BGMAC_DC_FCM_MASK 0x00000060
+#define BGMAC_DC_FCM_SHIFT 5
+#define BGMAC_DC_NAE 0x00000080
+#define BGMAC_DC_TF 0x00000100
+#define BGMAC_DC_RDS_MASK 0x00030000
+#define BGMAC_DC_RDS_SHIFT 16
+#define BGMAC_DC_TDS_MASK 0x000c0000
+#define BGMAC_DC_TDS_SHIFT 18
+#define BGMAC_DEV_STATUS 0x004 /* Configuration of the interface */
+#define BGMAC_DS_RBF 0x00000001
+#define BGMAC_DS_RDF 0x00000002
+#define BGMAC_DS_RIF 0x00000004
+#define BGMAC_DS_TBF 0x00000008
+#define BGMAC_DS_TDF 0x00000010
+#define BGMAC_DS_TIF 0x00000020
+#define BGMAC_DS_PO 0x00000040
+#define BGMAC_DS_MM_MASK 0x00000300 /* Mode of the interface */
+#define BGMAC_DS_MM_SHIFT 8
+#define BGMAC_BIST_STATUS 0x00c
+#define BGMAC_INT_STATUS 0x020 /* Interrupt status */
+#define BGMAC_IS_MRO 0x00000001
+#define BGMAC_IS_MTO 0x00000002
+#define BGMAC_IS_TFD 0x00000004
+#define BGMAC_IS_LS 0x00000008
+#define BGMAC_IS_MDIO 0x00000010
+#define BGMAC_IS_MR 0x00000020
+#define BGMAC_IS_MT 0x00000040
+#define BGMAC_IS_TO 0x00000080
+#define BGMAC_IS_DESC_ERR 0x00000400 /* Descriptor error */
+#define BGMAC_IS_DATA_ERR 0x00000800 /* Data error */
+#define BGMAC_IS_DESC_PROT_ERR 0x00001000 /* Descriptor protocol error */
+#define BGMAC_IS_RX_DESC_UNDERF 0x00002000 /* Receive descriptor underflow */
+#define BGMAC_IS_RX_F_OVERF 0x00004000 /* Receive fifi overflow */
+#define BGMAC_IS_TX_F_UNDERF 0x00008000 /* Transmit fifo underflow */
+#define BGMAC_IS_RX 0x00010000 /* Interrupt for RX queue 0 */
+#define BGMAC_IS_TX0 0x01000000 /* Interrupt for TX queue 0 */
+#define BGMAC_IS_TX1 0x02000000 /* Interrupt for TX queue 1 */
+#define BGMAC_IS_TX2 0x04000000 /* Interrupt for TX queue 2 */
+#define BGMAC_IS_TX3 0x08000000 /* Interrupt for TX queue 3 */
+#define BGMAC_IS_TX_MASK 0x0f000000
+#define BGMAC_IS_INTMASK 0x0f01fcff
+#define BGMAC_IS_ERRMASK 0x0000fc00
+#define BGMAC_INT_MASK 0x024 /* Interrupt mask */
+#define BGMAC_GP_TIMER 0x028
+#define BGMAC_INT_RECV_LAZY 0x100
+#define BGMAC_IRL_TO_MASK 0x00ffffff
+#define BGMAC_IRL_FC_MASK 0xff000000
+#define BGMAC_IRL_FC_SHIFT 24 /* Shift the number of interrupts triggered per received frame */
+#define BGMAC_FLOW_CTL_THRESH 0x104 /* Flow control thresholds */
+#define BGMAC_WRRTHRESH 0x108
+#define BGMAC_GMAC_IDLE_CNT_THRESH 0x10c
+#define BGMAC_PHY_ACCESS 0x180 /* PHY access address */
+#define BGMAC_PA_DATA_MASK 0x0000ffff
+#define BGMAC_PA_ADDR_MASK 0x001f0000
+#define BGMAC_PA_ADDR_SHIFT 16
+#define BGMAC_PA_REG_MASK 0x1f000000
+#define BGMAC_PA_REG_SHIFT 24
+#define BGMAC_PA_WRITE 0x20000000
+#define BGMAC_PA_START 0x40000000
+#define BGMAC_PHY_CNTL 0x188 /* PHY control address */
+#define BGMAC_PC_EPA_MASK 0x0000001f
+#define BGMAC_PC_MCT_MASK 0x007f0000
+#define BGMAC_PC_MCT_SHIFT 16
+#define BGMAC_PC_MTE 0x00800000
+#define BGMAC_TXQ_CTL 0x18c
+#define BGMAC_TXQ_CTL_DBT_MASK 0x00000fff
+#define BGMAC_TXQ_CTL_DBT_SHIFT 0
+#define BGMAC_RXQ_CTL 0x190
+#define BGMAC_RXQ_CTL_DBT_MASK 0x00000fff
+#define BGMAC_RXQ_CTL_DBT_SHIFT 0
+#define BGMAC_RXQ_CTL_PTE 0x00001000
+#define BGMAC_RXQ_CTL_MDP_MASK 0x3f000000
+#define BGMAC_RXQ_CTL_MDP_SHIFT 24
+#define BGMAC_GPIO_SELECT 0x194
+#define BGMAC_GPIO_OUTPUT_EN 0x198
+/* For 0x1e0 see BCMA_CLKCTLST */
+#define BGMAC_HW_WAR 0x1e4
+#define BGMAC_PWR_CTL 0x1e8
+#define BGMAC_DMA_BASE0 0x200 /* Tx and Rx controller */
+#define BGMAC_DMA_BASE1 0x240 /* Tx controller only */
+#define BGMAC_DMA_BASE2 0x280 /* Tx controller only */
+#define BGMAC_DMA_BASE3 0x2C0 /* Tx controller only */
+#define BGMAC_TX_GOOD_OCTETS 0x300
+#define BGMAC_TX_GOOD_OCTETS_HIGH 0x304
+#define BGMAC_TX_GOOD_PKTS 0x308
+#define BGMAC_TX_OCTETS 0x30c
+#define BGMAC_TX_OCTETS_HIGH 0x310
+#define BGMAC_TX_PKTS 0x314
+#define BGMAC_TX_BROADCAST_PKTS 0x318
+#define BGMAC_TX_MULTICAST_PKTS 0x31c
+#define BGMAC_TX_LEN_64 0x320
+#define BGMAC_TX_LEN_65_TO_127 0x324
+#define BGMAC_TX_LEN_128_TO_255 0x328
+#define BGMAC_TX_LEN_256_TO_511 0x32c
+#define BGMAC_TX_LEN_512_TO_1023 0x330
+#define BGMAC_TX_LEN_1024_TO_1522 0x334
+#define BGMAC_TX_LEN_1523_TO_2047 0x338
+#define BGMAC_TX_LEN_2048_TO_4095 0x33c
+#define BGMAC_TX_LEN_4095_TO_8191 0x340
+#define BGMAC_TX_LEN_8192_TO_MAX 0x344
+#define BGMAC_TX_JABBER_PKTS 0x348 /* Error */
+#define BGMAC_TX_OVERSIZE_PKTS 0x34c /* Error */
+#define BGMAC_TX_FRAGMENT_PKTS 0x350
+#define BGMAC_TX_UNDERRUNS 0x354 /* Error */
+#define BGMAC_TX_TOTAL_COLS 0x358
+#define BGMAC_TX_SINGLE_COLS 0x35c
+#define BGMAC_TX_MULTIPLE_COLS 0x360
+#define BGMAC_TX_EXCESSIVE_COLS 0x364 /* Error */
+#define BGMAC_TX_LATE_COLS 0x368 /* Error */
+#define BGMAC_TX_DEFERED 0x36c
+#define BGMAC_TX_CARRIER_LOST 0x370
+#define BGMAC_TX_PAUSE_PKTS 0x374
+#define BGMAC_TX_UNI_PKTS 0x378
+#define BGMAC_TX_Q0_PKTS 0x37c
+#define BGMAC_TX_Q0_OCTETS 0x380
+#define BGMAC_TX_Q0_OCTETS_HIGH 0x384
+#define BGMAC_TX_Q1_PKTS 0x388
+#define BGMAC_TX_Q1_OCTETS 0x38c
+#define BGMAC_TX_Q1_OCTETS_HIGH 0x390
+#define BGMAC_TX_Q2_PKTS 0x394
+#define BGMAC_TX_Q2_OCTETS 0x398
+#define BGMAC_TX_Q2_OCTETS_HIGH 0x39c
+#define BGMAC_TX_Q3_PKTS 0x3a0
+#define BGMAC_TX_Q3_OCTETS 0x3a4
+#define BGMAC_TX_Q3_OCTETS_HIGH 0x3a8
+#define BGMAC_RX_GOOD_OCTETS 0x3b0
+#define BGMAC_RX_GOOD_OCTETS_HIGH 0x3b4
+#define BGMAC_RX_GOOD_PKTS 0x3b8
+#define BGMAC_RX_OCTETS 0x3bc
+#define BGMAC_RX_OCTETS_HIGH 0x3c0
+#define BGMAC_RX_PKTS 0x3c4
+#define BGMAC_RX_BROADCAST_PKTS 0x3c8
+#define BGMAC_RX_MULTICAST_PKTS 0x3cc
+#define BGMAC_RX_LEN_64 0x3d0
+#define BGMAC_RX_LEN_65_TO_127 0x3d4
+#define BGMAC_RX_LEN_128_TO_255 0x3d8
+#define BGMAC_RX_LEN_256_TO_511 0x3dc
+#define BGMAC_RX_LEN_512_TO_1023 0x3e0
+#define BGMAC_RX_LEN_1024_TO_1522 0x3e4
+#define BGMAC_RX_LEN_1523_TO_2047 0x3e8
+#define BGMAC_RX_LEN_2048_TO_4095 0x3ec
+#define BGMAC_RX_LEN_4095_TO_8191 0x3f0
+#define BGMAC_RX_LEN_8192_TO_MAX 0x3f4
+#define BGMAC_RX_JABBER_PKTS 0x3f8 /* Error */
+#define BGMAC_RX_OVERSIZE_PKTS 0x3fc /* Error */
+#define BGMAC_RX_FRAGMENT_PKTS 0x400
+#define BGMAC_RX_MISSED_PKTS 0x404 /* Error */
+#define BGMAC_RX_CRC_ALIGN_ERRS 0x408 /* Error */
+#define BGMAC_RX_UNDERSIZE 0x40c /* Error */
+#define BGMAC_RX_CRC_ERRS 0x410 /* Error */
+#define BGMAC_RX_ALIGN_ERRS 0x414 /* Error */
+#define BGMAC_RX_SYMBOL_ERRS 0x418 /* Error */
+#define BGMAC_RX_PAUSE_PKTS 0x41c
+#define BGMAC_RX_NONPAUSE_PKTS 0x420
+#define BGMAC_RX_SACHANGES 0x424
+#define BGMAC_RX_UNI_PKTS 0x428
+#define BGMAC_UNIMAC_VERSION 0x800
+#define BGMAC_HDBKP_CTL 0x804
+#define BGMAC_CMDCFG 0x808 /* Configuration */
+#define BGMAC_CMDCFG_TE 0x00000001 /* Set to activate TX */
+#define BGMAC_CMDCFG_RE 0x00000002 /* Set to activate RX */
+#define BGMAC_CMDCFG_ES_MASK 0x0000000c /* Ethernet speed see gmac_speed */
+#define BGMAC_CMDCFG_ES_10 0x00000000
+#define BGMAC_CMDCFG_ES_100 0x00000004
+#define BGMAC_CMDCFG_ES_1000 0x00000008
+#define BGMAC_CMDCFG_PROM 0x00000010 /* Set to activate promiscuous mode */
+#define BGMAC_CMDCFG_PAD_EN 0x00000020
+#define BGMAC_CMDCFG_CF 0x00000040
+#define BGMAC_CMDCFG_PF 0x00000080
+#define BGMAC_CMDCFG_RPI 0x00000100 /* Unset to enable 802.3x tx flow control */
+#define BGMAC_CMDCFG_TAI 0x00000200
+#define BGMAC_CMDCFG_HD 0x00000400 /* Set if in half duplex mode */
+#define BGMAC_CMDCFG_HD_SHIFT 10
+#define BGMAC_CMDCFG_SR 0x00000800 /* Set to reset mode */
+#define BGMAC_CMDCFG_ML 0x00008000 /* Set to activate mac loopback mode */
+#define BGMAC_CMDCFG_AE 0x00400000
+#define BGMAC_CMDCFG_CFE 0x00800000
+#define BGMAC_CMDCFG_NLC 0x01000000
+#define BGMAC_CMDCFG_RL 0x02000000
+#define BGMAC_CMDCFG_RED 0x04000000
+#define BGMAC_CMDCFG_PE 0x08000000
+#define BGMAC_CMDCFG_TPI 0x10000000
+#define BGMAC_CMDCFG_AT 0x20000000
+#define BGMAC_MACADDR_HIGH 0x80c /* High 4 octets of own mac address */
+#define BGMAC_MACADDR_LOW 0x810 /* Low 2 octets of own mac address */
+#define BGMAC_RXMAX_LENGTH 0x814 /* Max receive frame length with vlan tag */
+#define BGMAC_PAUSEQUANTA 0x818
+#define BGMAC_MAC_MODE 0x844
+#define BGMAC_OUTERTAG 0x848
+#define BGMAC_INNERTAG 0x84c
+#define BGMAC_TXIPG 0x85c
+#define BGMAC_PAUSE_CTL 0xb30
+#define BGMAC_TX_FLUSH 0xb34
+#define BGMAC_RX_STATUS 0xb38
+#define BGMAC_TX_STATUS 0xb3c
+
+#define BGMAC_PHY_CTL 0x00
+#define BGMAC_PHY_CTL_SPEED_MSB 0x0040
+#define BGMAC_PHY_CTL_DUPLEX 0x0100 /* duplex mode */
+#define BGMAC_PHY_CTL_RESTART 0x0200 /* restart autonegotiation */
+#define BGMAC_PHY_CTL_ANENAB 0x1000 /* enable autonegotiation */
+#define BGMAC_PHY_CTL_SPEED 0x2000
+#define BGMAC_PHY_CTL_LOOP 0x4000 /* loopback */
+#define BGMAC_PHY_CTL_RESET 0x8000 /* reset */
+/* Helpers */
+#define BGMAC_PHY_CTL_SPEED_10 0
+#define BGMAC_PHY_CTL_SPEED_100 BGMAC_PHY_CTL_SPEED
+#define BGMAC_PHY_CTL_SPEED_1000 BGMAC_PHY_CTL_SPEED_MSB
+#define BGMAC_PHY_ADV 0x04
+#define BGMAC_PHY_ADV_10HALF 0x0020 /* advertise 10MBits/s half duplex */
+#define BGMAC_PHY_ADV_10FULL 0x0040 /* advertise 10MBits/s full duplex */
+#define BGMAC_PHY_ADV_100HALF 0x0080 /* advertise 100MBits/s half duplex */
+#define BGMAC_PHY_ADV_100FULL 0x0100 /* advertise 100MBits/s full duplex */
+#define BGMAC_PHY_ADV2 0x09
+#define BGMAC_PHY_ADV2_1000HALF 0x0100 /* advertise 1000MBits/s half duplex */
+#define BGMAC_PHY_ADV2_1000FULL 0x0200 /* advertise 1000MBits/s full duplex */
+
+/* BCMA GMAC core specific IO Control (BCMA_IOCTL) flags */
+#define BGMAC_BCMA_IOCTL_SW_CLKEN 0x00000004 /* PHY Clock Enable */
+#define BGMAC_BCMA_IOCTL_SW_RESET 0x00000008 /* PHY Reset */
+
+/* BCMA GMAC core specific IO status (BCMA_IOST) flags */
+#define BGMAC_BCMA_IOST_ATTACHED 0x00000800
+
+#define BGMAC_NUM_MIB_TX_REGS \
+ (((BGMAC_TX_Q3_OCTETS_HIGH - BGMAC_TX_GOOD_OCTETS) / 4) + 1)
+#define BGMAC_NUM_MIB_RX_REGS \
+ (((BGMAC_RX_UNI_PKTS - BGMAC_RX_GOOD_OCTETS) / 4) + 1)
+
+#define BGMAC_DMA_TX_CTL 0x00
+#define BGMAC_DMA_TX_ENABLE 0x00000001
+#define BGMAC_DMA_TX_SUSPEND 0x00000002
+#define BGMAC_DMA_TX_LOOPBACK 0x00000004
+#define BGMAC_DMA_TX_FLUSH 0x00000010
+#define BGMAC_DMA_TX_PARITY_DISABLE 0x00000800
+#define BGMAC_DMA_TX_ADDREXT_MASK 0x00030000
+#define BGMAC_DMA_TX_ADDREXT_SHIFT 16
+#define BGMAC_DMA_TX_INDEX 0x04
+#define BGMAC_DMA_TX_RINGLO 0x08
+#define BGMAC_DMA_TX_RINGHI 0x0C
+#define BGMAC_DMA_TX_STATUS 0x10
+#define BGMAC_DMA_TX_STATDPTR 0x00001FFF
+#define BGMAC_DMA_TX_STAT 0xF0000000
+#define BGMAC_DMA_TX_STAT_DISABLED 0x00000000
+#define BGMAC_DMA_TX_STAT_ACTIVE 0x10000000
+#define BGMAC_DMA_TX_STAT_IDLEWAIT 0x20000000
+#define BGMAC_DMA_TX_STAT_STOPPED 0x30000000
+#define BGMAC_DMA_TX_STAT_SUSP 0x40000000
+#define BGMAC_DMA_TX_ERROR 0x14
+#define BGMAC_DMA_TX_ERRDPTR 0x0001FFFF
+#define BGMAC_DMA_TX_ERR 0xF0000000
+#define BGMAC_DMA_TX_ERR_NOERR 0x00000000
+#define BGMAC_DMA_TX_ERR_PROT 0x10000000
+#define BGMAC_DMA_TX_ERR_UNDERRUN 0x20000000
+#define BGMAC_DMA_TX_ERR_TRANSFER 0x30000000
+#define BGMAC_DMA_TX_ERR_DESCREAD 0x40000000
+#define BGMAC_DMA_TX_ERR_CORE 0x50000000
+#define BGMAC_DMA_RX_CTL 0x20
+#define BGMAC_DMA_RX_ENABLE 0x00000001
+#define BGMAC_DMA_RX_FRAME_OFFSET_MASK 0x000000FE
+#define BGMAC_DMA_RX_FRAME_OFFSET_SHIFT 1
+#define BGMAC_DMA_RX_DIRECT_FIFO 0x00000100
+#define BGMAC_DMA_RX_OVERFLOW_CONT 0x00000400
+#define BGMAC_DMA_RX_PARITY_DISABLE 0x00000800
+#define BGMAC_DMA_RX_ADDREXT_MASK 0x00030000
+#define BGMAC_DMA_RX_ADDREXT_SHIFT 16
+#define BGMAC_DMA_RX_INDEX 0x24
+#define BGMAC_DMA_RX_RINGLO 0x28
+#define BGMAC_DMA_RX_RINGHI 0x2C
+#define BGMAC_DMA_RX_STATUS 0x30
+#define BGMAC_DMA_RX_STATDPTR 0x00001FFF
+#define BGMAC_DMA_RX_STAT 0xF0000000
+#define BGMAC_DMA_RX_STAT_DISABLED 0x00000000
+#define BGMAC_DMA_RX_STAT_ACTIVE 0x10000000
+#define BGMAC_DMA_RX_STAT_IDLEWAIT 0x20000000
+#define BGMAC_DMA_RX_STAT_STOPPED 0x30000000
+#define BGMAC_DMA_RX_STAT_SUSP 0x40000000
+#define BGMAC_DMA_RX_ERROR 0x34
+#define BGMAC_DMA_RX_ERRDPTR 0x0001FFFF
+#define BGMAC_DMA_RX_ERR 0xF0000000
+#define BGMAC_DMA_RX_ERR_NOERR 0x00000000
+#define BGMAC_DMA_RX_ERR_PROT 0x10000000
+#define BGMAC_DMA_RX_ERR_UNDERRUN 0x20000000
+#define BGMAC_DMA_RX_ERR_TRANSFER 0x30000000
+#define BGMAC_DMA_RX_ERR_DESCREAD 0x40000000
+#define BGMAC_DMA_RX_ERR_CORE 0x50000000
+
+#define BGMAC_DESC_CTL0_EOT 0x10000000 /* End of ring */
+#define BGMAC_DESC_CTL0_IOC 0x20000000 /* IRQ on complete */
+#define BGMAC_DESC_CTL0_SOF 0x40000000 /* Start of frame */
+#define BGMAC_DESC_CTL0_EOF 0x80000000 /* End of frame */
+#define BGMAC_DESC_CTL1_LEN 0x00001FFF
+
+#define BGMAC_PHY_NOREGS 0x1E
+#define BGMAC_PHY_MASK 0x1F
+
+#define BGMAC_MAX_TX_RINGS 4
+#define BGMAC_MAX_RX_RINGS 1
+
+#define BGMAC_TX_RING_SLOTS 128
+#define BGMAC_RX_RING_SLOTS 512 - 1 /* Why -1? Well, Broadcom does that... */
+
+#define BGMAC_RX_HEADER_LEN 28 /* Last 24 bytes are unused. Well... */
+#define BGMAC_RX_FRAME_OFFSET 30 /* There are 2 unused bytes between header and real data */
+#define BGMAC_RX_MAX_FRAME_SIZE 1536 /* Copied from b44/tg3 */
+#define BGMAC_RX_BUF_SIZE (BGMAC_RX_FRAME_OFFSET + BGMAC_RX_MAX_FRAME_SIZE)
+
+#define BGMAC_BFL_ENETROBO 0x0010 /* has ephy roboswitch spi */
+#define BGMAC_BFL_ENETADM 0x0080 /* has ADMtek switch */
+#define BGMAC_BFL_ENETVLAN 0x0100 /* can do vlan */
+
+#define BGMAC_CHIPCTL_1_IF_TYPE_MASK 0x00000030
+#define BGMAC_CHIPCTL_1_IF_TYPE_RMII 0x00000000
+#define BGMAC_CHIPCTL_1_IF_TYPE_MI 0x00000010
+#define BGMAC_CHIPCTL_1_IF_TYPE_RGMII 0x00000020
+#define BGMAC_CHIPCTL_1_SW_TYPE_MASK 0x000000C0
+#define BGMAC_CHIPCTL_1_SW_TYPE_EPHY 0x00000000
+#define BGMAC_CHIPCTL_1_SW_TYPE_EPHYMII 0x00000040
+#define BGMAC_CHIPCTL_1_SW_TYPE_EPHYRMII 0x00000080
+#define BGMAC_CHIPCTL_1_SW_TYPE_RGMI 0x000000C0
+#define BGMAC_CHIPCTL_1_RXC_DLL_BYPASS 0x00010000
+
+#define BGMAC_SPEED_10 0x0001
+#define BGMAC_SPEED_100 0x0002
+#define BGMAC_SPEED_1000 0x0004
+
+struct bgmac_slot_info {
+ struct sk_buff *skb;
+ dma_addr_t dma_addr;
+};
+
+struct bgmac_dma_desc {
+ __le32 ctl0;
+ __le32 ctl1;
+ __le32 addr_low;
+ __le32 addr_high;
+} __packed;
+
+struct bgmac_dma_ring {
+ bool tx;
+ u16 num_slots;
+ u16 start;
+ u16 end;
+
+ u16 mmio_base;
+ void *cpu_base;
+ dma_addr_t dma_base;
+
+ struct bgmac_slot_info slots[BGMAC_RX_RING_SLOTS];
+};
+
+struct bgmac_rx_header {
+ __le16 len;
+ __le16 flags;
+ __le16 pad[12];
+};
+
+struct bgmac {
+ struct bcma_device *core;
+ struct bcma_device *cmn; /* Reference to CMN core for BCM4706 */
+ struct net_device *net_dev;
+
+ u8 phyaddr;
+ bool has_robosw;
+
+ u32 int_mask;
+ u32 int_status;
+
+ bool loopback;
+
+ bool autoneg;
+ bool full_duplex;
+ int speed;
+
+ /* DMA */
+ struct bgmac_dma_ring tx_ring[BGMAC_MAX_TX_RINGS];
+ struct bgmac_dma_ring rx_ring[BGMAC_MAX_RX_RINGS];
+
+ /* Stats */
+ bool stats_grabbed;
+ u32 mib_tx_regs[BGMAC_NUM_MIB_TX_REGS];
+ u32 mib_rx_regs[BGMAC_NUM_MIB_RX_REGS];
+};
+
+static inline u32 bgmac_read(struct bgmac *bgmac, u16 offset)
+{
+ return bcma_read32(bgmac->core, offset);
+}
+
+static inline void bgmac_write(struct bgmac *bgmac, u16 offset, u32 value)
+{
+ bcma_write32(bgmac->core, offset, value);
+}
+
+static inline void bgmac_maskset(struct bgmac *bgmac, u16 offset, u32 mask,
+ u32 set)
+{
+ bgmac_write(bgmac, offset, (bgmac_read(bgmac, offset) & mask) | set);
+}
+
+static inline void bgmac_mask(struct bgmac *bgmac, u16 offset, u32 mask)
+{
+ bgmac_maskset(bgmac, offset, mask, 0);
+}
+
+static inline void bgmac_set(struct bgmac *bgmac, u16 offset, u32 set)
+{
+ bgmac_maskset(bgmac, offset, ~0, set);
+}
+
+u16 bgmac_phy_read(struct bgmac *bgmac, u8 phyaddr, u8 reg);
+void bgmac_phy_write(struct bgmac *bgmac, u8 phyaddr, u8 reg, u16 value);
+
+#endif /* _BGMAC_H */
--- a/include/linux/bcma/bcma_driver_chipcommon.h
+++ b/include/linux/bcma/bcma_driver_chipcommon.h
@@ -627,4 +627,6 @@ int bcma_nflash_erase(struct bcma_drv_cc
int bcma_nflash_commit(struct bcma_drv_cc *cc, u32 offset, u32 len, const u8 *buf);
#endif
+extern u32 bcma_pmu_get_bus_clock(struct bcma_drv_cc *cc);
+
#endif /* LINUX_BCMA_DRIVER_CC_H_ */
Reference in New Issue Copy Permalink