ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-22 15:02:32 +00:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity
3b11647da0
openwrt/package/kernel/lantiq/ltq-vectoring/Makefile

61 lines
1.7 KiB
Makefile
Raw Normal View History

ltq-vectoring: add driver In order to calculate the required pre-distortion for downstream vectoring, the vectoring control entity (VCE) at the carrier office needs error samples from the modem. On Lantiq VR9 modems, error reports are generated by the firmware, but need to be multiplexed into the data stream by the driver on the main processor when L2 encapsulation is selected by the VCE. This driver provides the necessary callback function, which is called by the MEI driver after receiving an error report from the firmware. Originally, it is part of the Lantiq PPA driver, but after a few changes it also works with the PTM driver used in OpenWrt. The direct call to ndo_start_xmit needs to be replaced, as the PTM driver relies on locks from the kernel. Instead dev_queue_xmit is used, which is called from a work queue, as it is not safe to call from an interrupt handler. Additional changes include fixes to support recent kernel versions and a change of the used interface from ptm0 to dsl0. Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jan Hoffmann <jan@3e8.eu>
2022-03-13 21:14:35 +00:00
include $(TOPDIR)/rules.mk
PKG_NAME:=ltq-vectoring
treewide: replace AUTORELEASE with real PKG_RELEASE Based on Paul Fertser <fercerpav@gmail.com>'s guidance: Change AUTORELEASE in rules.mk to: ``` AUTORELEASE = $(if $(DUMP),0,$(shell sed -i "s/\$$(AUTORELEASE)/$(call commitcount,1)/" $(CURDIR)/Makefile)) ``` then update all affected packages by: ``` for i in $(git grep -l PKG_RELEASE:=.*AUTORELEASE | sed 's^.*/\([^/]*\)/Makefile^\1^';); do make package/$i/clean done ``` Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-05-17 13:08:40 +00:00
PKG_RELEASE:=3
ltq-vectoring: add driver In order to calculate the required pre-distortion for downstream vectoring, the vectoring control entity (VCE) at the carrier office needs error samples from the modem. On Lantiq VR9 modems, error reports are generated by the firmware, but need to be multiplexed into the data stream by the driver on the main processor when L2 encapsulation is selected by the VCE. This driver provides the necessary callback function, which is called by the MEI driver after receiving an error report from the firmware. Originally, it is part of the Lantiq PPA driver, but after a few changes it also works with the PTM driver used in OpenWrt. The direct call to ndo_start_xmit needs to be replaced, as the PTM driver relies on locks from the kernel. Instead dev_queue_xmit is used, which is called from a work queue, as it is not safe to call from an interrupt handler. Additional changes include fixes to support recent kernel versions and a change of the used interface from ptm0 to dsl0. Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jan Hoffmann <jan@3e8.eu>
2022-03-13 21:14:35 +00:00
PKG_SOURCE_PROTO:=git
PKG_SOURCE_URL:=https://gitlab.com/prpl-foundation/intel/ppa_drv.git
PKG_SOURCE_DATE:=2019-05-20
PKG_SOURCE_VERSION:=4fa7ac30fcc8ec4eddae9debba5f4230981f469f
treewide: package: update missed hashes after switch to ZSTD With the switch to ZSTD for git clone packaging, hashes have changed so fixup remaining package hashes that were missed in the inital update. Fixes: b3c1c57 ("treewide: update PKG_MIRROR_HASH to zst") Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-04-07 10:29:11 +00:00
PKG_MIRROR_HASH:=53ae72a929db598202a4e9c3df43b65fa0778cd165c1ec2ddf9361993795b930
ltq-vectoring: add driver In order to calculate the required pre-distortion for downstream vectoring, the vectoring control entity (VCE) at the carrier office needs error samples from the modem. On Lantiq VR9 modems, error reports are generated by the firmware, but need to be multiplexed into the data stream by the driver on the main processor when L2 encapsulation is selected by the VCE. This driver provides the necessary callback function, which is called by the MEI driver after receiving an error report from the firmware. Originally, it is part of the Lantiq PPA driver, but after a few changes it also works with the PTM driver used in OpenWrt. The direct call to ndo_start_xmit needs to be replaced, as the PTM driver relies on locks from the kernel. Instead dev_queue_xmit is used, which is called from a work queue, as it is not safe to call from an interrupt handler. Additional changes include fixes to support recent kernel versions and a change of the used interface from ptm0 to dsl0. Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jan Hoffmann <jan@3e8.eu>
2022-03-13 21:14:35 +00:00
PKG_LICENSE:=GPL-2.0 BSD-2-Clause
MAKE_PATH:=src/vectoring
PKG_EXTMOD_SUBDIRS:=$(MAKE_PATH)
include $(INCLUDE_DIR)/kernel.mk
include $(INCLUDE_DIR)/package.mk
define KernelPackage/ltq-vectoring
SECTION:=sys
CATEGORY:=Kernel modules
SUBMENU:=Network Devices
TITLE:=driver for sending vectoring error samples
DEPENDS:=@TARGET_lantiq_xrx200
FILES:=$(PKG_BUILD_DIR)/$(MAKE_PATH)/ltq_vectoring.ko
AUTOLOAD:=$(call AutoLoad,49,ltq_vectoring)
endef
define Package/ltq-vectoring/description
This driver is responsible for sending error reports to the vectoring
control entity, which is required for downstream vectoring to work.
The error reports are generated by the DSL firmware, and passed to this
driver by the MEI driver.
endef
define KernelPackage/ltq-vectoring-test
SECTION:=sys
CATEGORY:=Kernel modules
SUBMENU:=Network Devices
TITLE:=driver for testing the vectoring driver
DEPENDS:=@TARGET_lantiq_xrx200 +kmod-ltq-vectoring
FILES:=$(PKG_BUILD_DIR)/$(MAKE_PATH)/ltq_vectoring_test.ko
endef
define Package/ltq-vectoring-test/description
This allows to send dummy data to the vectoring error block callback.
This is only needed for test and development purposes.
endef
define Build/Configure
endef
define Build/Compile
kernel: Make use of KERNEL_MAKE Make use of KERNEL_MAKE in kernel packages were easily possible. This moves some more code to common places and reduces the number of lines. It is defined like this: KERNEL_MAKE = $(MAKE) $(KERNEL_MAKEOPTS) KERNEL_MAKEOPTS = -C $(LINUX_DIR) $(KERNEL_MAKE_FLAGS) Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2022-12-14 21:34:19 +00:00
+$(KERNEL_MAKE) $(PKG_JOBS) \
ltq-vectoring: add driver In order to calculate the required pre-distortion for downstream vectoring, the vectoring control entity (VCE) at the carrier office needs error samples from the modem. On Lantiq VR9 modems, error reports are generated by the firmware, but need to be multiplexed into the data stream by the driver on the main processor when L2 encapsulation is selected by the VCE. This driver provides the necessary callback function, which is called by the MEI driver after receiving an error report from the firmware. Originally, it is part of the Lantiq PPA driver, but after a few changes it also works with the PTM driver used in OpenWrt. The direct call to ndo_start_xmit needs to be replaced, as the PTM driver relies on locks from the kernel. Instead dev_queue_xmit is used, which is called from a work queue, as it is not safe to call from an interrupt handler. Additional changes include fixes to support recent kernel versions and a change of the used interface from ptm0 to dsl0. Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jan Hoffmann <jan@3e8.eu>
2022-03-13 21:14:35 +00:00
M="$(PKG_BUILD_DIR)/$(MAKE_PATH)" \
modules
endef
$(eval $(call KernelPackage,ltq-vectoring))
$(eval $(call KernelPackage,ltq-vectoring-test))
Reference in New Issue Copy Permalink