openwrt/target/linux/bcm53xx/Makefile

# SPDX-License-Identifier: GPL-2.0-only
#
# Copyright (C) 2013 OpenWrt.org

include $(TOPDIR)/rules.mk

ARCH:=arm
BOARD:=bcm53xx
BOARDNAME:=Broadcom BCM47xx/53xx (ARM)
FEATURES:=squashfs nand usb pci pcie gpio pwm
CPU_TYPE:=cortex-a9
SUBTARGETS:=generic

KERNEL_PATCHVER:=5.10
KERNEL_TESTING_PATCHVER:=5.10

define Target/Description
	Build firmware images for Broadcom based BCM47xx/53xx routers with ARM CPU, *not* MIPS.
endef

include $(INCLUDE_DIR)/target.mk

KERNELNAME:=zImage dtbs

DEFAULT_PACKAGES += nvram \
	osafeloader oseama otrx \
	kmod-gpio-button-hotplug \
	kmod-leds-gpio

$(eval $(call BuildTarget))
target: use SPDX license identifiers on Makefiles Use SPDX license tags to allow machines to check licenses. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> 2021-02-10 13:52:34 +00:00			`# SPDX-License-Identifier: GPL-2.0-only`
bcm53xx: add initial support for ARM based BCM47XX and BCM53XX SoCs This was only tested on a Netgear R6250, but it could also work on other devices when the correct images are generated. It is only possible to boot into a ram disk, no Ethernet, Wifi, flash, USB is supported. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 37268 2013-07-12 13:46:27 +00:00			`#`
			`# Copyright (C) 2013 OpenWrt.org`
target: use SPDX license identifiers on Makefiles Use SPDX license tags to allow machines to check licenses. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> 2021-02-10 13:52:34 +00:00
bcm53xx: add initial support for ARM based BCM47XX and BCM53XX SoCs This was only tested on a Netgear R6250, but it could also work on other devices when the correct images are generated. It is only possible to boot into a ram disk, no Ethernet, Wifi, flash, USB is supported. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 37268 2013-07-12 13:46:27 +00:00			`include $(TOPDIR)/rules.mk`

			`ARCH:=arm`
			`BOARD:=bcm53xx`
brcm47xx/bcm53xx: improve description Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 42204 2014-08-18 20:29:26 +00:00			`BOARDNAME:=Broadcom BCM47xx/53xx (ARM)`
bcm53xx: enable PWM for bcm53xx The Meraki MR32 (BCM53016A1) uses the pwm to drive the tricolor LED. The driver has been available in upstream for a long time. Only the Device-Tree definition was missing, but it has been queued recently. Signed-off-by: Christian Lamparter <chunkeey@gmail.com> 2020-08-29 20:53:18 +00:00			`FEATURES:=squashfs nand usb pci pcie gpio pwm`
build: unify arm target cflags Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 38211 2013-09-26 17:53:20 +00:00			`CPU_TYPE:=cortex-a9`
bcm53xx: add generic subtarget Same game as for 853e4dd3062df7cb5704b15d6af6730e3194b571. Add generic to the filenames. CC: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Paul Spooren <mail@aparcar.org> Acked-by: Rafał Miłecki <rafal@milecki.pl> 2019-08-23 08:30:10 +00:00			`SUBTARGETS:=generic`
bcm53xx: add initial support for ARM based BCM47XX and BCM53XX SoCs This was only tested on a Netgear R6250, but it could also work on other devices when the correct images are generated. It is only possible to boot into a ram disk, no Ethernet, Wifi, flash, USB is supported. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 37268 2013-07-12 13:46:27 +00:00
bcm53xx: switch to the kernel 5.10 With PCI and USB regressions fixed it should be safe to switch now. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> 2021-08-31 07:40:54 +00:00			`KERNEL_PATCHVER:=5.10`
bcm53xx: add testing support for kernel 5.10 It still requires fixing PCIe support: [ 6.644699] pcie_iproc_bcma bcma0:7: host bridge /axi@18000000/pcie@12000 ranges: [ 6.652217] pcie_iproc_bcma bcma0:7: No bus range found for /axi@18000000/pcie@12000, using [bus 00-ff] [ 6.661833] OF: /axi@18000000/pcie@12000: Missing device_type [ 6.667622] pcie_iproc_bcma: probe of bcma0:7 failed with error -12 [ 6.673985] pcie_iproc_bcma bcma0:8: host bridge /axi@18000000/pcie@13000 ranges: [ 6.681514] pcie_iproc_bcma bcma0:8: No bus range found for /axi@18000000/pcie@13000, using [bus 00-ff] [ 6.691137] pcie_iproc_bcma: probe of bcma0:8 failed with error -12 [ 6.697522] pcie_iproc_bcma bcma0:9: host bridge /axi@18000000/pcie@14000 ranges: [ 6.705048] pcie_iproc_bcma bcma0:9: No bus range found for /axi@18000000/pcie@14000, using [bus 00-ff] [ 6.714669] pcie_iproc_bcma: probe of bcma0:9 failed with error -12 Signed-off-by: Rafał Miłecki <rafal@milecki.pl> 2021-07-29 11:50:19 +00:00			`KERNEL_TESTING_PATCHVER:=5.10`
bcm53xx: add initial support for ARM based BCM47XX and BCM53XX SoCs This was only tested on a Netgear R6250, but it could also work on other devices when the correct images are generated. It is only possible to boot into a ram disk, no Ethernet, Wifi, flash, USB is supported. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 37268 2013-07-12 13:46:27 +00:00
			`define Target/Description`
			`Build firmware images for Broadcom based BCM47xx/53xx routers with ARM CPU, not MIPS.`
			`endef`

build: fix subtarget descriptions Move Target/Description above the target.mk include Signed-off-by: Felix Fietkau <nbd@nbd.name> 2016-09-04 11:34:18 +00:00			`include $(INCLUDE_DIR)/target.mk`

targets: remove useless quotes around KERNELNAME Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 42780 2014-10-05 20:17:19 +00:00			`KERNELNAME:=zImage dtbs`
bcm53xx: add initial support for ARM based BCM47XX and BCM53XX SoCs This was only tested on a Netgear R6250, but it could also work on other devices when the correct images are generated. It is only possible to boot into a ram disk, no Ethernet, Wifi, flash, USB is supported. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 37268 2013-07-12 13:46:27 +00:00
bcm53xx: switch to the upstream DSA-based b53 driver 1. Drop swconfig 2. Simplify network setup 3. Verify network config 4. Disable Buffalo WZR-900DHP for now - it misses ports definition Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-By: Christian Lamparter <chunkeey@gmail.com> 2021-10-18 13:04:17 +00:00			`DEFAULT_PACKAGES += nvram \`
bcm53xx: support SafeLoader format in sysupgrade Signed-off-by: Rafał Miłecki <rafal@milecki.pl> 2016-11-19 06:58:26 +00:00			`osafeloader oseama otrx \`
bcm53xx: early buttons support (without interrupts) Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 42718 2014-10-02 12:05:58 +00:00			`kmod-gpio-button-hotplug \`
kernel: drop empty kmod-ledtrig-* packages The following four led triggers are enabled in generic config. * kmod-ledtrig-default-on * kmod-ledtrig-heartbeat * kmod-ledtrig-netdev * kmod-ledtrig-timer Drop the packages and remove them from DEVICE_PACKAGES. There's no other package depending on them in this repo. Signed-off-by: Sungbo Eo <mans0n@gorani.run> 2021-01-04 13:52:20 +00:00			`kmod-leds-gpio`
bcm53xx: add initial support for ARM based BCM47XX and BCM53XX SoCs This was only tested on a Netgear R6250, but it could also work on other devices when the correct images are generated. It is only possible to boot into a ram disk, no Ethernet, Wifi, flash, USB is supported. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 37268 2013-07-12 13:46:27 +00:00
			`$(eval $(call BuildTarget))`