openwrt/target/linux/bcm27xx/patches-5.4/950-0944-rtc-rv3028-Write-BSM-and-TCE-TCR-to-EEPROM.patch

From ffc137a8949cd7859bdf139fa7a56b9dbdb4b2ce Mon Sep 17 00:00:00 2001
From: Phil Elwell <phil@raspberrypi.com>
Date: Fri, 15 May 2020 16:28:32 +0100
Subject: [PATCH] rtc: rv3028: Write BSM and TCE/TCR to EEPROM

Periodically the RV3028 refreshes registers from the EEPROM. When this
happens, some settings that have only been committed to registers are
lost. Change the handling of backup-switchover-mode and
trickle-resistor-ohms to write the EEPROM instead (if something has
changed), on the understanding that registers will be refreshed
afterwards.

See: https://github.com/raspberrypi/linux/issues/2912

Signed-off-by: Phil Elwell <phil@raspberrypi.com>
---
 drivers/rtc/rtc-rv3028.c | 60 ++++++++++++++++++++++++++++------------
 1 file changed, 43 insertions(+), 17 deletions(-)

--- a/drivers/rtc/rtc-rv3028.c
+++ b/drivers/rtc/rtc-rv3028.c
@@ -18,6 +18,7 @@
 #include <linux/of_device.h>
 #include <linux/regmap.h>
 #include <linux/rtc.h>
+//#include "rtc-core.h"
 
 #define RV3028_SEC			0x00
 #define RV3028_MIN			0x01
@@ -73,7 +74,7 @@
 
 #define RV3028_BACKUP_TCE		BIT(5)
 #define RV3028_BACKUP_TCR_MASK		GENMASK(1,0)
-#define RV3028_BACKUP_BSM_MASK		0x0C
+#define RV3028_BACKUP_BSM_MASK		GENMASK(3,2)
 
 #define OFFSET_STEP_PPT			953674
 
@@ -601,7 +602,8 @@ static int rv3028_probe(struct i2c_clien
 	struct rv3028_data *rv3028;
 	int ret, status;
 	u32 ohms;
-	u8 bsm;
+	u32 bsm;
+	u8 backup, backup_bits, backup_mask;
 	struct nvmem_config nvmem_cfg = {
 		.name = "rv3028_nvram",
 		.word_size = 1,
@@ -673,16 +675,17 @@ static int rv3028_probe(struct i2c_clien
 	if (ret)
 		return ret;
 
+	backup_bits = 0;
+	backup_mask = 0;
+
 	/* setup backup switchover mode */
-	if (!device_property_read_u8(&client->dev, "backup-switchover-mode",
-				     &bsm))  {
+	dev_dbg(&client->dev, "Checking RTC backup switchover-mode\n");
+	if (!device_property_read_u32(&client->dev,
+				      "backup-switchover-mode",
+				      &bsm)) {
 		if (bsm <= 3) {
-			ret = regmap_update_bits(rv3028->regmap, RV3028_BACKUP,
-				RV3028_BACKUP_BSM_MASK,
-				(bsm & 0x03) << 2);
-
-			if (ret)
-				return ret;
+			backup_bits |= (u8)(bsm << 2);
+			backup_mask |= RV3028_BACKUP_BSM_MASK;
 		} else {
 			dev_warn(&client->dev, "invalid backup switchover mode value\n");
 		}
@@ -698,15 +701,38 @@ static int rv3028_probe(struct i2c_clien
 				break;
 
 		if (i < ARRAY_SIZE(rv3028_trickle_resistors)) {
-			ret = regmap_update_bits(rv3028->regmap, RV3028_BACKUP,
-						 RV3028_BACKUP_TCE |
-						 RV3028_BACKUP_TCR_MASK,
-						 RV3028_BACKUP_TCE | i);
-			if (ret)
-				return ret;
+			backup_bits |= RV3028_BACKUP_TCE | i;
+			backup_mask |= RV3028_BACKUP_TCE |
+				RV3028_BACKUP_TCR_MASK;
 		} else {
-			dev_warn(&client->dev, "invalid trickle resistor value\n");
+			dev_warn(&client->dev,
+				 "invalid trickle resistor value\n");
+		}
+	}
+
+	if (backup_mask) {
+		ret = rv3028_eeprom_read((void *)(rv3028->regmap),
+					 RV3028_BACKUP,
+					 (void *)&backup, 1);
+		if (!ret) {
+			/* Write EEPROM only if needed */
+			if ((backup & backup_mask) != backup_bits) {
+				backup = (backup & ~backup_mask) | backup_bits;
+				dev_dbg(&client->dev,
+					"Backup register doesn't match: EEPROM write required\n");
+				ret = rv3028_eeprom_write(
+					(void *)(rv3028->regmap),
+					RV3028_BACKUP, (void *)&backup, 1);
+			}
 		}
+
+		/* In the event of an EEPROM failure, update the register
+		   instead. */
+		if (ret)
+			ret = regmap_update_bits(rv3028->regmap, RV3028_BACKUP,
+						 backup_mask, backup_bits);
+		if (ret)
+			return ret;
 	}
 
 	ret = rtc_add_group(rv3028->rtc, &rv3028_attr_group);