openwrt/target/linux/ath79/dts/qca9531_glinet_gl-ar300m-lite.dts

/dts-v1/;

#include "qca9531_glinet_gl-ar300m-nor.dts"

/ {
	compatible = "glinet,gl-ar300m-lite", "qca,qca9531";
	model = "GL.iNet GL-AR300M-Lite";
};

// "Disable" unpopulated GMAC1

&eth1 {
	compatible = "syscon", "simple-mfd";
};

&led_status {
	label = "gl-ar300m-lite:red:status";
};

&led_lan {
	label = "gl-ar300m-lite:green:lan";
};

&led_wlan {
	label = "gl-ar300m-lite:green:wlan";
};
ath79: Add GL.iNet AR-300M-Lite AR300M-Lite is single-Ethernet variant of the AR300M series Its eth0 would otherwise be assigned to the WAN interface making it unreachable firstboot or failsafe. Installation instructions from OEM (OpenWrt variant): * Install sysupgrade.bin using OEM's "Advanced" GUI (LuCI), * Do not preserve settings * Access rebooted device via Ethernet at OpenWrt default address Add previously missing LED defaults for all three variants; -nand, -nor, -lite to the definitions in 01_leds Non-lite variants thanks to Andreas Ziegler https://patchwork.ozlabs.org/patch/1049396/ Runtime-tested: GL.iNet AR300M-Lite Signed-off-by: Jeff Kletsky <git-commits@allycomm.com> 2019-03-07 04:44:33 +00:00			`/dts-v1/;`

			`#include "qca9531_glinet_gl-ar300m-nor.dts"`

			`/ {`
			`compatible = "glinet,gl-ar300m-lite", "qca,qca9531";`
			`model = "GL.iNet GL-AR300M-Lite";`
			`};`

ath79: Restore GL.iNet GL-AR300M-Lite first-boot connectivity The relationship between GMAC0 and GMAC1 and the kernel devices eth0 and eth1 was reversed for many ath79 devices by commit 8dde11d521 ath79: dts: drop "simple-mfd" for gmacs in SoC dtsi The GL-AR300M-Lite is a single-port device, with the "LAN" port of the GL-AR300M board unpopulated and its sole port now referenced as eth1, as a result of commit 8dde11d521. The device was unreachable on first boot or fresh config. By changing &eth1 (GMAC1) to an MFD, GMAC0 is able to associate with the phy and is known by the kernel as "eth0". Thanks to Chuanhong Guo for the suggestion of "simple-mfd" Signed-off-by: Jeff Kletsky <git-commits@allycomm.com> (cherry picked from commit b90ea19860853dd538e704e3e4402686c316e43c) 2019-09-28 17:39:58 +00:00			`// "Disable" unpopulated GMAC1`

			`&eth1 {`
			`compatible = "syscon", "simple-mfd";`
			`};`
ath79: Add GL.iNet AR-300M-Lite AR300M-Lite is single-Ethernet variant of the AR300M series Its eth0 would otherwise be assigned to the WAN interface making it unreachable firstboot or failsafe. Installation instructions from OEM (OpenWrt variant): * Install sysupgrade.bin using OEM's "Advanced" GUI (LuCI), * Do not preserve settings * Access rebooted device via Ethernet at OpenWrt default address Add previously missing LED defaults for all three variants; -nand, -nor, -lite to the definitions in 01_leds Non-lite variants thanks to Andreas Ziegler https://patchwork.ozlabs.org/patch/1049396/ Runtime-tested: GL.iNet AR300M-Lite Signed-off-by: Jeff Kletsky <git-commits@allycomm.com> 2019-03-07 04:44:33 +00:00
			`&led_status {`
			`label = "gl-ar300m-lite:red:status";`
			`};`

			`&led_lan {`
			`label = "gl-ar300m-lite:green:lan";`
			`};`

			`&led_wlan {`
			`label = "gl-ar300m-lite:green:wlan";`
			`};`