openwrt/target/linux/bcm27xx/patches-5.10/950-0382-drm-panel-raspberrypi-touchscreen-Use-independent-I2.patch

From 3ad3a680ece56c7134d9500a0413b4f9259c07d8 Mon Sep 17 00:00:00 2001
From: Dave Stevenson <dave.stevenson@raspberrypi.com>
Date: Thu, 23 Apr 2020 10:17:18 +0100
Subject: [PATCH] drm/panel/raspberrypi-touchscreen: Use independent
 I2C actions with delay.

We now have the hardware I2C controller pinmuxed to the drive the
display I2C, but this controller does not support clock stretching.
The Atmel micro-controller in the panel requires clock stretching
to allow it to prepare any data to be read.

Split the rpi_touchscreen_i2c_read into two independent transactions with
a delay between them for the Atmel to prepare the data.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
---
 .../drm/panel/panel-raspberrypi-touchscreen.c | 30 ++++++++++++++++++-
 1 file changed, 29 insertions(+), 1 deletion(-)

--- a/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c
+++ b/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c
@@ -219,7 +219,35 @@ static struct rpi_touchscreen *panel_to_
 
 static int rpi_touchscreen_i2c_read(struct rpi_touchscreen *ts, u8 reg)
 {
-	return i2c_smbus_read_byte_data(ts->i2c, reg);
+	struct i2c_client *client = ts->i2c;
+	struct i2c_msg msgs[1];
+	u8 addr_buf[1] = { reg };
+	u8 data_buf[1] = { 0, };
+	int ret;
+
+	/* Write register address */
+	msgs[0].addr = client->addr;
+	msgs[0].flags = 0;
+	msgs[0].len = ARRAY_SIZE(addr_buf);
+	msgs[0].buf = addr_buf;
+
+	ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
+	if (ret != ARRAY_SIZE(msgs))
+		return -EIO;
+
+	usleep_range(100, 300);
+
+	/* Read data from register */
+	msgs[0].addr = client->addr;
+	msgs[0].flags = I2C_M_RD;
+	msgs[0].len = 1;
+	msgs[0].buf = data_buf;
+
+	ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
+	if (ret != ARRAY_SIZE(msgs))
+		return -EIO;
+
+	return data_buf[0];
 }
 
 static void rpi_touchscreen_i2c_write(struct rpi_touchscreen *ts,