openwrt/package/boot/tfa-layerscape/Makefile

185 lines
4.2 KiB
Makefile
Raw Normal View History

#
# Copyright 2019 NXP
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
include $(TOPDIR)/rules.mk
PKG_NAME:=tfa-layerscape
PKG_VERSION:=lf-6.1.1-1.0.0
PKG_RELEASE:=1
PKG_SOURCE_PROTO:=git
PKG_SOURCE_URL:=https://github.com/nxp-qoriq/atf
PKG_SOURCE_VERSION:=lf-6.1.1-1.0.0
PKG_MIRROR_HASH:=e109ca87a0f432529ab4d1fcd019adc0cd0d3684c96cdf770aac113f9bbe4bd6
PKG_BUILD_DEPENDS:=tfa-layerscape/host
include $(INCLUDE_DIR)/host-build.mk
include $(INCLUDE_DIR)/trusted-firmware-a.mk
include $(INCLUDE_DIR)/package.mk
HOST_CFLAGS += -Wall -Werror -pedantic -std=c99
define Host/Compile
$(MAKE) -C \
$(HOST_BUILD_DIR)/tools/fiptool \
PLAT_FIPTOOL_HELPER_MK="$(HOST_BUILD_DIR)/tools/nxp/plat_fiptool/plat_fiptool.mk" \
CFLAGS="$(HOST_CFLAGS)" \
LDFLAGS="$(HOST_LDFLAGS)" \
HOSTCCFLAGS="$(HOST_CFLAGS)"
$(MAKE) -C \
$(HOST_BUILD_DIR)/tools/nxp/create_pbl \
CFLAGS="$(HOST_CFLAGS)"
endef
define Host/Install
$(INSTALL_BIN) $(HOST_BUILD_DIR)/tools/fiptool/fiptool $(STAGING_DIR_HOST)/bin/fiptool-layerscape
$(INSTALL_BIN) $(HOST_BUILD_DIR)/tools/nxp/create_pbl/create_pbl $(STAGING_DIR_HOST)/bin/tfa-create-pbl
$(INSTALL_BIN) $(HOST_BUILD_DIR)/tools/nxp/create_pbl/byte_swap $(STAGING_DIR_HOST)/bin/tfa-byte-swap
endef
define Trusted-Firmware-A/Default
BUILD_TARGET:=layerscape
BUILD_SUBTARGET:=armv8_64b
DEPENDS:=+layerscape-rcw +u-boot-fsl_$(1)
endef
define Trusted-Firmware-A/ls1012a-frdm
NAME:=NXP LS1012AFRDM
layerscape: resurrect support for FRDM-LS1012A Re-add support for NXP FRDM-LS1012A, which mimics the flash layout of the rest boards supported by LSDK. 0x000000000000-0x000000100000 : "bl2" 0x000000100000-0x000000500000 : "fip" 0x000000500000-0x000000600000 : "u-boot-env" 0x000000600000-0x000000a00000 : "reserved-1" 0x000000a00000-0x000000d00000 : "pfe" 0x000000d00000-0x000000f00000 : "reserved-2" 0x000000f00000-0x000001000000 : "dtb" 0x000001000000-0x000002000000 : "kernel" 0x000002000000-0x000004000000 : "ubifs" Specification SoC: LS1012A single core 800MHz RAM: 512 MB DDR3 Flash: 64 MB QSPI NOR Ethernet: 2x 10/100/1000 Mbps Connectors: µUSB 3.0 OTG µUSB 2.0 (debugging & power input) 2x 3.5mm jack for microphone & headphone (SGTL5000) Arduino Shield expansion with I2C, SPI, UART, and GPIO JTAG LEDS: 3x (non-configurable) Buttons: 1x (reset, non-configurable) Be advised that erasing or writing 64MB flash takes some time to finish. Do not reset the board until all operations end with success, otherwise You'll need external tools to re-program the flash chip. Installation Follow the QSPI programing procedure for LS1012AFRWY board in target/linux/layerscape/README, point 3.3. Don't forget about updating U-Boot environment with MAC addresses of ethernet interfaces, variable 'ethaddr' for eth0 and 'eth1addr' for eth1. As the LSDK images do not support sysupgrade, nor do changes in this commit, it's planed in upcoming submissions. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
2020-02-25 19:07:36 +00:00
PLAT:=ls1012afrdm
BOOT_MODE:=qspi
endef
define Trusted-Firmware-A/ls1012a-rdb
NAME:=NXP LS1012ARDB
PLAT:=ls1012ardb
BOOT_MODE:=qspi
endef
define Trusted-Firmware-A/ls1012a-frwy-sdboot
NAME:=NXP LS1012AFRWY
PLAT:=ls1012afrwy
BOOT_MODE:=qspi
endef
define Trusted-Firmware-A/ls1028a-rdb
TITLE:=NXP LS1028ARDB
PLAT:=ls1028ardb
BOOT_MODE:=flexspi_nor
endef
define Trusted-Firmware-A/ls1028a-rdb-sdboot
TITLE:=NXP LS1028ARDB SD Boot
PLAT:=ls1028ardb
BOOT_MODE:=sd
endef
define Trusted-Firmware-A/ls1043a-rdb
NAME:=NXP LS1043ARDB
PLAT:=ls1043ardb
BOOT_MODE:=nor
endef
define Trusted-Firmware-A/ls1043a-rdb-sdboot
NAME:=NXP LS1043ARDB SD Boot
PLAT:=ls1043ardb
BOOT_MODE:=sd
endef
define Trusted-Firmware-A/ls1046a-frwy
NAME:=NXP LS1046AFRWY
PLAT:=ls1046afrwy
BOOT_MODE:=qspi
endef
define Trusted-Firmware-A/ls1046a-frwy-sdboot
NAME:=NXP LS1046AFRWY SD Boot
PLAT:=ls1046afrwy
BOOT_MODE:=sd
endef
define Trusted-Firmware-A/ls1046a-rdb
NAME:=NXP LS1046ARDB
PLAT:=ls1046ardb
BOOT_MODE:=qspi
endef
define Trusted-Firmware-A/ls1046a-rdb-sdboot
NAME:=NXP LS1046ARDB SD Boot
PLAT:=ls1046ardb
BOOT_MODE:=sd
endef
define Trusted-Firmware-A/ls1088a-rdb
NAME:=NXP LS1088ARDB
PLAT:=ls1088ardb
BOOT_MODE:=qspi
endef
define Trusted-Firmware-A/ls1088a-rdb-sdboot
NAME:=NXP LS1088ARDB SD Boot
PLAT:=ls1088ardb
BOOT_MODE:=sd
endef
define Trusted-Firmware-A/ls2088a-rdb
NAME:=NXP LS2088ARDB
PLAT:=ls2088ardb
BOOT_MODE:=nor
endef
define Trusted-Firmware-A/lx2160a-rdb
NAME:=NXP LX2160ARDB
PLAT:=lx2160ardb
BOOT_MODE:=flexspi_nor
endef
define Trusted-Firmware-A/lx2160a-rdb-sdboot
NAME:=NXP LX2160ARDB SD Boot
PLAT:=lx2160ardb
BOOT_MODE:=sd
endef
TFA_TARGETS := \
ls1012a-frdm \
ls1012a-rdb \
ls1012a-frwy-sdboot \
ls1028a-rdb \
ls1028a-rdb-sdboot \
ls1043a-rdb \
ls1043a-rdb-sdboot \
ls1046a-frwy \
ls1046a-frwy-sdboot \
ls1046a-rdb \
ls1046a-rdb-sdboot \
ls1088a-rdb \
ls1088a-rdb-sdboot \
ls2088a-rdb \
lx2160a-rdb \
lx2160a-rdb-sdboot
TFA_MAKE_FLAGS += \
fip pbl \
BOOT_MODE=$(BOOT_MODE) \
RCW=$(STAGING_DIR_IMAGE)/fsl_$(BUILD_VARIANT)-rcw.bin \
BL33=$(STAGING_DIR_IMAGE)/fsl_$(BUILD_VARIANT)-uboot.bin \
FIPTOOL=$(STAGING_DIR_HOST)/bin/fiptool-layerscape \
CREATE_PBL=$(STAGING_DIR_HOST)/bin/tfa-create-pbl \
BYTE_SWAP=$(STAGING_DIR_HOST)/bin/tfa-byte-swap
define Build/InstallDev
$(INSTALL_DIR) $(STAGING_DIR_IMAGE)
$(CP) $(PKG_BUILD_DIR)/build/$(PLAT)/release/bl2_$(BOOT_MODE).pbl \
$(STAGING_DIR_IMAGE)/fsl_$(BUILD_VARIANT)-bl2.pbl
$(CP) $(PKG_BUILD_DIR)/build/$(PLAT)/release/fip.bin \
$(STAGING_DIR_IMAGE)/fsl_$(BUILD_VARIANT)-fip.bin
endef
define Package/trusted-firmware-a/install/default
endef
$(eval $(call HostBuild))
$(eval $(call BuildPackage/Trusted-Firmware-A))