mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-29 10:08:59 +00:00
402 lines
5.9 KiB
Plaintext
402 lines
5.9 KiB
Plaintext
|
// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
|
||
|
|
||
|
/dts-v1/;
|
||
|
#include <dt-bindings/input/input.h>
|
||
|
#include <dt-bindings/gpio/gpio.h>
|
||
|
|
||
|
#include "mt7622.dtsi"
|
||
|
#include "mt6380.dtsi"
|
||
|
|
||
|
/ {
|
||
|
compatible = "linksys,e8450", "mediatek,mt7622";
|
||
|
|
||
|
aliases {
|
||
|
serial0 = &uart0;
|
||
|
led-boot = &led_power;
|
||
|
led-failsafe = &led_power;
|
||
|
led-running = &led_power;
|
||
|
led-upgrade = &led_power;
|
||
|
};
|
||
|
|
||
|
chosen {
|
||
|
stdout-path = "serial0:115200n8";
|
||
|
bootargs = "earlycon=uart8250,mmio32,0x11002000 console=ttyS0,115200n1 swiotlb=512";
|
||
|
};
|
||
|
|
||
|
cpus {
|
||
|
cpu@0 {
|
||
|
proc-supply = <&mt6380_vcpu_reg>;
|
||
|
sram-supply = <&mt6380_vm_reg>;
|
||
|
};
|
||
|
|
||
|
cpu@1 {
|
||
|
proc-supply = <&mt6380_vcpu_reg>;
|
||
|
sram-supply = <&mt6380_vm_reg>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
gpio-keys {
|
||
|
compatible = "gpio-keys";
|
||
|
|
||
|
factory {
|
||
|
label = "reset";
|
||
|
linux,code = <KEY_RESTART>;
|
||
|
gpios = <&pio 0 GPIO_ACTIVE_LOW>;
|
||
|
};
|
||
|
|
||
|
wps {
|
||
|
label = "wps";
|
||
|
linux,code = <KEY_WPS_BUTTON>;
|
||
|
gpios = <&pio 102 GPIO_ACTIVE_LOW>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
gpio-leds {
|
||
|
compatible = "gpio-leds";
|
||
|
|
||
|
led_power: power_blue {
|
||
|
label = "power:blue";
|
||
|
gpios = <&pio 95 GPIO_ACTIVE_LOW>;
|
||
|
default-state = "on";
|
||
|
};
|
||
|
|
||
|
power_orange {
|
||
|
label = "power:orange";
|
||
|
gpios = <&pio 96 GPIO_ACTIVE_LOW>;
|
||
|
default-state = "off";
|
||
|
};
|
||
|
|
||
|
inet_blue {
|
||
|
label = "inet:blue";
|
||
|
gpios = <&pio 97 GPIO_ACTIVE_LOW>;
|
||
|
default-state = "off";
|
||
|
};
|
||
|
|
||
|
inet_orange {
|
||
|
label = "inet:orange";
|
||
|
gpios = <&pio 98 GPIO_ACTIVE_LOW>;
|
||
|
default-state = "off";
|
||
|
};
|
||
|
};
|
||
|
|
||
|
memory {
|
||
|
reg = <0 0x40000000 0 0x40000000>;
|
||
|
};
|
||
|
|
||
|
reg_1p8v: regulator-1p8v {
|
||
|
compatible = "regulator-fixed";
|
||
|
regulator-name = "fixed-1.8V";
|
||
|
regulator-min-microvolt = <1800000>;
|
||
|
regulator-max-microvolt = <1800000>;
|
||
|
regulator-always-on;
|
||
|
};
|
||
|
|
||
|
reg_3p3v: regulator-3p3v {
|
||
|
compatible = "regulator-fixed";
|
||
|
regulator-name = "fixed-3.3V";
|
||
|
regulator-min-microvolt = <3300000>;
|
||
|
regulator-max-microvolt = <3300000>;
|
||
|
regulator-boot-on;
|
||
|
regulator-always-on;
|
||
|
};
|
||
|
|
||
|
reg_5v: regulator-5v {
|
||
|
compatible = "regulator-fixed";
|
||
|
regulator-name = "fixed-5V";
|
||
|
regulator-min-microvolt = <5000000>;
|
||
|
regulator-max-microvolt = <5000000>;
|
||
|
regulator-boot-on;
|
||
|
regulator-always-on;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
&bch {
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&btif {
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&cir {
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&irrx_pins>;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
ð {
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <ð_pins>;
|
||
|
status = "okay";
|
||
|
|
||
|
gmac0: mac@0 {
|
||
|
compatible = "mediatek,eth-mac";
|
||
|
reg = <0>;
|
||
|
phy-mode = "2500base-x";
|
||
|
|
||
|
fixed-link {
|
||
|
speed = <2500>;
|
||
|
full-duplex;
|
||
|
pause;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
mdio-bus {
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <0>;
|
||
|
|
||
|
switch@0 {
|
||
|
compatible = "mediatek,mt7531";
|
||
|
reg = <0>;
|
||
|
reset-gpios = <&pio 54 0>;
|
||
|
|
||
|
ports {
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <0>;
|
||
|
|
||
|
port@0 {
|
||
|
reg = <0>;
|
||
|
label = "lan1";
|
||
|
};
|
||
|
|
||
|
port@1 {
|
||
|
reg = <1>;
|
||
|
label = "lan2";
|
||
|
};
|
||
|
|
||
|
port@2 {
|
||
|
reg = <2>;
|
||
|
label = "lan3";
|
||
|
};
|
||
|
|
||
|
port@3 {
|
||
|
reg = <3>;
|
||
|
label = "lan4";
|
||
|
};
|
||
|
|
||
|
wan: port@4 {
|
||
|
reg = <4>;
|
||
|
label = "wan";
|
||
|
};
|
||
|
|
||
|
port@6 {
|
||
|
reg = <6>;
|
||
|
label = "cpu";
|
||
|
ethernet = <&gmac0>;
|
||
|
phy-mode = "2500base-x";
|
||
|
|
||
|
fixed-link {
|
||
|
speed = <2500>;
|
||
|
full-duplex;
|
||
|
pause;
|
||
|
};
|
||
|
};
|
||
|
};
|
||
|
};
|
||
|
|
||
|
};
|
||
|
};
|
||
|
|
||
|
&pcie0 {
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&pcie0_pins>;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&pcie1 {
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&pcie1_pins>;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&pio {
|
||
|
eth_pins: eth-pins {
|
||
|
mux {
|
||
|
function = "eth";
|
||
|
groups = "mdc_mdio", "rgmii_via_gmac2";
|
||
|
};
|
||
|
};
|
||
|
|
||
|
irrx_pins: irrx-pins {
|
||
|
mux {
|
||
|
function = "ir";
|
||
|
groups = "ir_1_rx";
|
||
|
};
|
||
|
};
|
||
|
|
||
|
irtx_pins: irtx-pins {
|
||
|
mux {
|
||
|
function = "ir";
|
||
|
groups = "ir_1_tx";
|
||
|
};
|
||
|
};
|
||
|
|
||
|
pcie0_pins: pcie0-pins {
|
||
|
mux {
|
||
|
function = "pcie";
|
||
|
groups = "pcie0_pad_perst",
|
||
|
"pcie0_1_waken",
|
||
|
"pcie0_1_clkreq";
|
||
|
};
|
||
|
};
|
||
|
|
||
|
pcie1_pins: pcie1-pins {
|
||
|
mux {
|
||
|
function = "pcie";
|
||
|
groups = "pcie1_pad_perst",
|
||
|
"pcie1_0_waken",
|
||
|
"pcie1_0_clkreq";
|
||
|
};
|
||
|
};
|
||
|
|
||
|
pmic_bus_pins: pmic-bus-pins {
|
||
|
mux {
|
||
|
function = "pmic";
|
||
|
groups = "pmic_bus";
|
||
|
};
|
||
|
};
|
||
|
|
||
|
pwm7_pins: pwm1-2-pins {
|
||
|
mux {
|
||
|
function = "pwm";
|
||
|
groups = "pwm_ch7_2";
|
||
|
};
|
||
|
};
|
||
|
|
||
|
wled_pins: wled-pins {
|
||
|
mux {
|
||
|
function = "led";
|
||
|
groups = "wled";
|
||
|
};
|
||
|
};
|
||
|
|
||
|
/* Serial NAND is shared pin with SPI-NOR */
|
||
|
serial_nand_pins: serial-nand-pins {
|
||
|
mux {
|
||
|
function = "flash";
|
||
|
groups = "snfi";
|
||
|
};
|
||
|
};
|
||
|
|
||
|
spic0_pins: spic0-pins {
|
||
|
mux {
|
||
|
function = "spi";
|
||
|
groups = "spic0_0";
|
||
|
};
|
||
|
};
|
||
|
|
||
|
spic1_pins: spic1-pins {
|
||
|
mux {
|
||
|
function = "spi";
|
||
|
groups = "spic1_0";
|
||
|
};
|
||
|
};
|
||
|
|
||
|
uart0_pins: uart0-pins {
|
||
|
mux {
|
||
|
function = "uart";
|
||
|
groups = "uart0_0_tx_rx" ;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
uart2_pins: uart2-pins {
|
||
|
mux {
|
||
|
function = "uart";
|
||
|
groups = "uart2_1_tx_rx" ;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
watchdog_pins: watchdog-pins {
|
||
|
mux {
|
||
|
function = "watchdog";
|
||
|
groups = "watchdog";
|
||
|
};
|
||
|
};
|
||
|
};
|
||
|
|
||
|
&pwm {
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&pwm7_pins>;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&pwrap {
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&pmic_bus_pins>;
|
||
|
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&sata {
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
&sata_phy {
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
&slot0 {
|
||
|
wmac1: mt7915@0,0 {
|
||
|
reg = <0x0000 0 0 0 0>;
|
||
|
ieee80211-freq-limit = <5000000 6000000>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
&snfi {
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&serial_nand_pins>;
|
||
|
status = "okay";
|
||
|
|
||
|
snand: spi_nand@0 {
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <1>;
|
||
|
compatible = "spi-nand";
|
||
|
spi-max-frequency = <104000000>;
|
||
|
reg = <0>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
&spi0 {
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&spic0_pins>;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&spi1 {
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&spic1_pins>;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&ssusb {
|
||
|
vusb33-supply = <®_3p3v>;
|
||
|
vbus-supply = <®_5v>;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&u3phy {
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&uart0 {
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&uart0_pins>;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&uart2 {
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&uart2_pins>;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&rtc {
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
&watchdog {
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&watchdog_pins>;
|
||
|
status = "okay";
|
||
|
};
|