ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-22 15:02:32 +00:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity
322f2c1424
openwrt/package/boot/uboot-layerscape/Makefile

170 lines
3.7 KiB
Makefile
Raw Normal View History

layerscape: add 64b/32b target for ls1043ardb device Add support for NXP layerscape ls1043ardb 64b/32b Dev board. LS1043a is an SoC with 4x64-bit up to 1.6 GHz ARMv8 A53 cores. ls1043ardb support features as: 2GB DDR4, 128MB NOR/512MB NAND, USB3.0, eSDHC, I2C, GPIO, PCIe/Mini-PCIe, 6x1G/1x10G network port, etc. 64b/32b ls1043ardb target is using 4.4 kernel, and rcw/u-boot/fman images from NXP QorIQ SDK release. All of 4.4 kernel patches porting from SDK release or upstream. QorIQ SDK ISOs can be downloaded from this location: http://www.nxp.com/products/software-and-tools/run-time-software/linux-sdk/linux-sdk-for-qoriq-processors:SDKLINUX Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-10-28 16:14:32 +00:00
#
# Copyright (C) 2016 Jiang Yutang <jiangyutang1978@gmail.com>
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
include $(TOPDIR)/rules.mk
layerscape: uboot-layerscape: prefer github over git.freescale.com In order to prevent the impact of the merger of the company and the potential rebase of the SDK repositories, migrate the u-boot source to github. Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-12-01 15:01:27 +00:00
PKG_NAME:=uboot-layerscape
uboot-layerscape: Bump to lf-6.1.1-1.0.0 and switch to github The default location of uboot-layerscape has been changed from codeuaurora to github. Also use the latest tag for Layerscape Linux Development POC from NXP. Tested on: * NXP FRWY-LS1012A * NXP LS1028A-RDB * NXP LS1046A-RDB V2: Remove ls1028ardb specifix fixups not needed with new uboot Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@protonmail.ch> (reset PKG_RELEASE) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2023-04-12 09:20:37 +00:00
PKG_VERSION:=lf-6.1.1-1.0.0
PKG_RELEASE:=1
layerscape: uboot-layerscape: prefer github over git.freescale.com In order to prevent the impact of the merger of the company and the potential rebase of the SDK repositories, migrate the u-boot source to github. Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-12-01 15:01:27 +00:00
PKG_SOURCE_PROTO:=git
uboot-layerscape: Bump to lf-6.1.1-1.0.0 and switch to github The default location of uboot-layerscape has been changed from codeuaurora to github. Also use the latest tag for Layerscape Linux Development POC from NXP. Tested on: * NXP FRWY-LS1012A * NXP LS1028A-RDB * NXP LS1046A-RDB V2: Remove ls1028ardb specifix fixups not needed with new uboot Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@protonmail.ch> (reset PKG_RELEASE) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2023-04-12 09:20:37 +00:00
PKG_SOURCE_URL:=https://github.com/nxp-qoriq/u-boot
PKG_SOURCE_VERSION:=lf-6.1.1-1.0.0
treewide: package: update missed hashes after switch to ZSTD With the switch to ZSTD for git clone packaging, hashes have changed so fixup remaining package hashes that were missed in the inital update. Fixes: b3c1c57 ("treewide: update PKG_MIRROR_HASH to zst") Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-04-07 10:29:11 +00:00
PKG_MIRROR_HASH:=6cb3cd569f11f582375eb3af475a2a0d77fe602813337b64883ef01344be7bf6
layerscape: add 64b/32b target for ls1043ardb device Add support for NXP layerscape ls1043ardb 64b/32b Dev board. LS1043a is an SoC with 4x64-bit up to 1.6 GHz ARMv8 A53 cores. ls1043ardb support features as: 2GB DDR4, 128MB NOR/512MB NAND, USB3.0, eSDHC, I2C, GPIO, PCIe/Mini-PCIe, 6x1G/1x10G network port, etc. 64b/32b ls1043ardb target is using 4.4 kernel, and rcw/u-boot/fman images from NXP QorIQ SDK release. All of 4.4 kernel patches porting from SDK release or upstream. QorIQ SDK ISOs can be downloaded from this location: http://www.nxp.com/products/software-and-tools/run-time-software/linux-sdk/linux-sdk-for-qoriq-processors:SDKLINUX Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-10-28 16:14:32 +00:00
uboot-layerscape: switch to u-boot.mk Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-23 09:50:22 +00:00
include $(INCLUDE_DIR)/u-boot.mk
layerscape: add 64b/32b target for ls1043ardb device Add support for NXP layerscape ls1043ardb 64b/32b Dev board. LS1043a is an SoC with 4x64-bit up to 1.6 GHz ARMv8 A53 cores. ls1043ardb support features as: 2GB DDR4, 128MB NOR/512MB NAND, USB3.0, eSDHC, I2C, GPIO, PCIe/Mini-PCIe, 6x1G/1x10G network port, etc. 64b/32b ls1043ardb target is using 4.4 kernel, and rcw/u-boot/fman images from NXP QorIQ SDK release. All of 4.4 kernel patches porting from SDK release or upstream. QorIQ SDK ISOs can be downloaded from this location: http://www.nxp.com/products/software-and-tools/run-time-software/linux-sdk/linux-sdk-for-qoriq-processors:SDKLINUX Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-10-28 16:14:32 +00:00
include $(INCLUDE_DIR)/package.mk
uboot-layerscape: switch to u-boot.mk Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-23 09:50:22 +00:00
define U-Boot/Default
BUILD_TARGET:=layerscape
layerscape: rename subtargets and update makefile files Rename subtargets 32b/64b with armv8_32b/armv8_64b which are more proper, and update makefile files. There also will be other subtargets added in the future, like armv7. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2017-06-29 03:19:07 +00:00
BUILD_SUBTARGET:=armv8_64b
uboot-layerscape: switch to u-boot.mk Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-23 09:50:22 +00:00
BUILD_DEVICES:=$(1)
UBOOT_IMAGE:=u-boot-dtb.bin
layerscape: add u-boot environment support for OpenWrt boot This patch is to implement u-boot environment txt files to support OpenWrt boot for all layerscape devices. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2018-07-17 09:42:47 +00:00
ENV_SIZE:=0x2000
layerscape: update u-boot to LSDK-18.06 The u-boot source code had been migrated to codeaurora for LSDK-18.06 release and the future release. This patch is to update u-boot to LSDK-18.06 for both uboot-layerscape and uboot-layerscape-armv8_32b packages. Besides, this patch also introduced some other changes. - Reworked uboot-layerscape makefile to make it more readable. - Define package in uboot-layerscape-armv8_32b for each board. - Fixed u-boot package selection in target image makefile. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2018-07-04 04:20:41 +00:00
endef
layerscape: harmonize device strings OpenWrt lately has harmonized device (definition) names to the pattern vendor_model to improve overall consistency, also with other values like the DTS compatible. This patch applies that scheme to the layerscape target. Since this (intentionally) creates a bigger overlap between DTS names, compatible, and device definition name, it also moves DEVICE_DTS and SUPPORTED_DEVICES definitions to the Device/Default blocks. Apart from that, it also modifies several packages to use consistent naming in order to keep the $(1) file references working. While at it, remove one layer of complexity for the setup in tfa-layerscape package. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-07-20 13:34:04 +00:00
define U-Boot/fsl_ls1012a-frdm
layerscape: resurrect support for FRDM-LS1012A Re-add support for NXP FRDM-LS1012A, which mimics the flash layout of the rest boards supported by LSDK. 0x000000000000-0x000000100000 : "bl2" 0x000000100000-0x000000500000 : "fip" 0x000000500000-0x000000600000 : "u-boot-env" 0x000000600000-0x000000a00000 : "reserved-1" 0x000000a00000-0x000000d00000 : "pfe" 0x000000d00000-0x000000f00000 : "reserved-2" 0x000000f00000-0x000001000000 : "dtb" 0x000001000000-0x000002000000 : "kernel" 0x000002000000-0x000004000000 : "ubifs" Specification SoC: LS1012A single core 800MHz RAM: 512 MB DDR3 Flash: 64 MB QSPI NOR Ethernet: 2x 10/100/1000 Mbps Connectors: µUSB 3.0 OTG µUSB 2.0 (debugging & power input) 2x 3.5mm jack for microphone & headphone (SGTL5000) Arduino Shield expansion with I2C, SPI, UART, and GPIO JTAG LEDS: 3x (non-configurable) Buttons: 1x (reset, non-configurable) Be advised that erasing or writing 64MB flash takes some time to finish. Do not reset the board until all operations end with success, otherwise You'll need external tools to re-program the flash chip. Installation Follow the QSPI programing procedure for LS1012AFRWY board in target/linux/layerscape/README, point 3.3. Don't forget about updating U-Boot environment with MAC addresses of ethernet interfaces, variable 'ethaddr' for eth0 and 'eth1addr' for eth1. As the LSDK images do not support sysupgrade, nor do changes in this commit, it's planed in upcoming submissions. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
2020-02-25 19:07:36 +00:00
NAME:=NXP LS1012AFRDM
UBOOT_CONFIG:=ls1012afrdm_tfa
ENV_SIZE:=0x40000
endef
layerscape: harmonize device strings OpenWrt lately has harmonized device (definition) names to the pattern vendor_model to improve overall consistency, also with other values like the DTS compatible. This patch applies that scheme to the layerscape target. Since this (intentionally) creates a bigger overlap between DTS names, compatible, and device definition name, it also moves DEVICE_DTS and SUPPORTED_DEVICES definitions to the Device/Default blocks. Apart from that, it also modifies several packages to use consistent naming in order to keep the $(1) file references working. While at it, remove one layer of complexity for the setup in tfa-layerscape package. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-07-20 13:34:04 +00:00
define U-Boot/fsl_ls1012a-rdb
layerscape: update u-boot to LSDK-18.06 The u-boot source code had been migrated to codeaurora for LSDK-18.06 release and the future release. This patch is to update u-boot to LSDK-18.06 for both uboot-layerscape and uboot-layerscape-armv8_32b packages. Besides, this patch also introduced some other changes. - Reworked uboot-layerscape makefile to make it more readable. - Define package in uboot-layerscape-armv8_32b for each board. - Fixed u-boot package selection in target image makefile. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2018-07-04 04:20:41 +00:00
NAME:=NXP LS1012ARDB
layerscape: convert to use TF-A for firmware This patch is to convert to use TF-A for firmware. - Use un-swapped rcw since swapping will be done in TF-A. - Use u-boot with TF-A defconfig. - Rework memory map for TF-A introduction. Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2019-05-06 03:26:09 +00:00
UBOOT_CONFIG:=ls1012ardb_tfa
layerscape: add u-boot environment support for OpenWrt boot This patch is to implement u-boot environment txt files to support OpenWrt boot for all layerscape devices. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2018-07-17 09:42:47 +00:00
ENV_SIZE:=0x40000
layerscape: update u-boot to LSDK-18.06 The u-boot source code had been migrated to codeaurora for LSDK-18.06 release and the future release. This patch is to update u-boot to LSDK-18.06 for both uboot-layerscape and uboot-layerscape-armv8_32b packages. Besides, this patch also introduced some other changes. - Reworked uboot-layerscape makefile to make it more readable. - Define package in uboot-layerscape-armv8_32b for each board. - Fixed u-boot package selection in target image makefile. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2018-07-04 04:20:41 +00:00
endef
layerscape: harmonize device strings OpenWrt lately has harmonized device (definition) names to the pattern vendor_model to improve overall consistency, also with other values like the DTS compatible. This patch applies that scheme to the layerscape target. Since this (intentionally) creates a bigger overlap between DTS names, compatible, and device definition name, it also moves DEVICE_DTS and SUPPORTED_DEVICES definitions to the Device/Default blocks. Apart from that, it also modifies several packages to use consistent naming in order to keep the $(1) file references working. While at it, remove one layer of complexity for the setup in tfa-layerscape package. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-07-20 13:34:04 +00:00
define U-Boot/fsl_ls1012a-frwy-sdboot
layerscape: add ls1012afrwy support and drop ls1012afrdm ls1012afrdm was no longer supported in NXP Layerscape SDK. Instead a new board ls1012afrwy was introduced in LSDK. This patch is to drop ls1012afrdm and add ls1012afrwy support. Since only 2MB NOR flash could be used, we just put u-boot and firmware on NOR flash, and put kernel/dtb/rootfs on SD card. The Layerscape FRWY-LS1012A board is an ultra-low-cost development platform for LS1012A Series Communication Processors built on Arm Cortex-A53. This tool refines the FRDM-LS1012A with more features for a better hands-on experience for IoT, edge computing, and various advanced embedded applications. Features include easy access to processor I/O, low-power operation, micro SD card storage, an M2 connector, a small form factor, and expansion board options via mikroBUS Click Module. The MicroBUS Module provides easy expansion via hundreds of powerful modules supporting sensors, actuators, memories, and displays. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2018-07-18 08:56:07 +00:00
NAME:=NXP LS1012AFRWY
layerscape: convert to use TF-A for firmware This patch is to convert to use TF-A for firmware. - Use un-swapped rcw since swapping will be done in TF-A. - Use u-boot with TF-A defconfig. - Rework memory map for TF-A introduction. Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2019-05-06 03:26:09 +00:00
UBOOT_CONFIG:=ls1012afrwy_tfa
layerscape: add ls1012afrwy support and drop ls1012afrdm ls1012afrdm was no longer supported in NXP Layerscape SDK. Instead a new board ls1012afrwy was introduced in LSDK. This patch is to drop ls1012afrdm and add ls1012afrwy support. Since only 2MB NOR flash could be used, we just put u-boot and firmware on NOR flash, and put kernel/dtb/rootfs on SD card. The Layerscape FRWY-LS1012A board is an ultra-low-cost development platform for LS1012A Series Communication Processors built on Arm Cortex-A53. This tool refines the FRDM-LS1012A with more features for a better hands-on experience for IoT, edge computing, and various advanced embedded applications. Features include easy access to processor I/O, low-power operation, micro SD card storage, an M2 connector, a small form factor, and expansion board options via mikroBUS Click Module. The MicroBUS Module provides easy expansion via hundreds of powerful modules supporting sensors, actuators, memories, and displays. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2018-07-18 08:56:07 +00:00
ENV_SIZE:=0x10000
layerscape: add 64b/32b target for ls1043ardb device Add support for NXP layerscape ls1043ardb 64b/32b Dev board. LS1043a is an SoC with 4x64-bit up to 1.6 GHz ARMv8 A53 cores. ls1043ardb support features as: 2GB DDR4, 128MB NOR/512MB NAND, USB3.0, eSDHC, I2C, GPIO, PCIe/Mini-PCIe, 6x1G/1x10G network port, etc. 64b/32b ls1043ardb target is using 4.4 kernel, and rcw/u-boot/fman images from NXP QorIQ SDK release. All of 4.4 kernel patches porting from SDK release or upstream. QorIQ SDK ISOs can be downloaded from this location: http://www.nxp.com/products/software-and-tools/run-time-software/linux-sdk/linux-sdk-for-qoriq-processors:SDKLINUX Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-10-28 16:14:32 +00:00
endef
uboot-layerscape: Add ls1028ardb support Support uboot for NXP LS1028ARDB reference board. GIC V3 has to be disabled in the uboot config to allow booting upstream kernels. This patch can be dropped once uboot is updated to 2022.04 version to nxp-qoriq github lf-6.1.1 branch. Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@protonmail.ch>
2023-04-12 10:07:32 +00:00
define U-Boot/fsl_ls1028a-rdb
NAME:=NXP LS1028ARDB
UBOOT_CONFIG:=ls1028ardb_tfa
endef
define U-Boot/fsl_ls1028a-rdb-sdboot
NAME:=NXP LS1028ARDB SD Card Boot
UBOOT_CONFIG:=ls1028ardb_tfa
endef
layerscape: harmonize device strings OpenWrt lately has harmonized device (definition) names to the pattern vendor_model to improve overall consistency, also with other values like the DTS compatible. This patch applies that scheme to the layerscape target. Since this (intentionally) creates a bigger overlap between DTS names, compatible, and device definition name, it also moves DEVICE_DTS and SUPPORTED_DEVICES definitions to the Device/Default blocks. Apart from that, it also modifies several packages to use consistent naming in order to keep the $(1) file references working. While at it, remove one layer of complexity for the setup in tfa-layerscape package. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-07-20 13:34:04 +00:00
define U-Boot/fsl_ls1043a-rdb
layerscape: update u-boot to LSDK-18.06 The u-boot source code had been migrated to codeaurora for LSDK-18.06 release and the future release. This patch is to update u-boot to LSDK-18.06 for both uboot-layerscape and uboot-layerscape-armv8_32b packages. Besides, this patch also introduced some other changes. - Reworked uboot-layerscape makefile to make it more readable. - Define package in uboot-layerscape-armv8_32b for each board. - Fixed u-boot package selection in target image makefile. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2018-07-04 04:20:41 +00:00
NAME:=NXP LS1043ARDB
layerscape: convert to use TF-A for firmware This patch is to convert to use TF-A for firmware. - Use un-swapped rcw since swapping will be done in TF-A. - Use u-boot with TF-A defconfig. - Rework memory map for TF-A introduction. Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2019-05-06 03:26:09 +00:00
UBOOT_CONFIG:=ls1043ardb_tfa
layerscape: add 64b/32b target for ls1043ardb device Add support for NXP layerscape ls1043ardb 64b/32b Dev board. LS1043a is an SoC with 4x64-bit up to 1.6 GHz ARMv8 A53 cores. ls1043ardb support features as: 2GB DDR4, 128MB NOR/512MB NAND, USB3.0, eSDHC, I2C, GPIO, PCIe/Mini-PCIe, 6x1G/1x10G network port, etc. 64b/32b ls1043ardb target is using 4.4 kernel, and rcw/u-boot/fman images from NXP QorIQ SDK release. All of 4.4 kernel patches porting from SDK release or upstream. QorIQ SDK ISOs can be downloaded from this location: http://www.nxp.com/products/software-and-tools/run-time-software/linux-sdk/linux-sdk-for-qoriq-processors:SDKLINUX Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-10-28 16:14:32 +00:00
endef
layerscape: harmonize device strings OpenWrt lately has harmonized device (definition) names to the pattern vendor_model to improve overall consistency, also with other values like the DTS compatible. This patch applies that scheme to the layerscape target. Since this (intentionally) creates a bigger overlap between DTS names, compatible, and device definition name, it also moves DEVICE_DTS and SUPPORTED_DEVICES definitions to the Device/Default blocks. Apart from that, it also modifies several packages to use consistent naming in order to keep the $(1) file references working. While at it, remove one layer of complexity for the setup in tfa-layerscape package. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-07-20 13:34:04 +00:00
define U-Boot/fsl_ls1043a-rdb-sdboot
layerscape: add SD card boot support NOR/QSPI Flash on Layerscape board only has limited 64MB memory size. Since some boards (ls1043ardb/ls1046ardb/ls1088ardb/ls1021atwr) could support SD card boot, we added SD boot support for them to put all things on SD card to meet large memory requirement. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2018-07-18 06:14:40 +00:00
NAME:=NXP LS1043ARDB SD Card Boot
layerscape: convert to use TF-A for firmware This patch is to convert to use TF-A for firmware. - Use un-swapped rcw since swapping will be done in TF-A. - Use u-boot with TF-A defconfig. - Rework memory map for TF-A introduction. Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2019-05-06 03:26:09 +00:00
UBOOT_CONFIG:=ls1043ardb_tfa
layerscape: add SD card boot support NOR/QSPI Flash on Layerscape board only has limited 64MB memory size. Since some boards (ls1043ardb/ls1046ardb/ls1088ardb/ls1021atwr) could support SD card boot, we added SD boot support for them to put all things on SD card to meet large memory requirement. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2018-07-18 06:14:40 +00:00
endef
layerscape: add FRWY-LS1046A board support The LS1046A Freeway board (FRWY) is a high-performance computing, evaluation, and development platform that supports the QorIQ LS1046A architecture processor capable of support more than 32,000 CoreMark performance. The FRWY-LS1046A board supports the QorIQ LS1046A processor, onboard DDR4 memory, multiple Gigabit Ethernet, USB3.0 and M2_Type_E interfaces for Wi-Fi. The FRWY-LS1046A-TP includes the Coral Tensor Flow Processing Unit that offloads AI/ML inferencing from the CPU to provide significant boost for AI/ML applications. The FRWY-LS1046A-TP includes one M.2 TPU module and more modules can easily be added including USB versions of the module to scale the AI/ML performance. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> [rebase, use AUTORELEASE, fix sorting, add dtb to firmware part] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-08-03 04:52:22 +00:00
define U-Boot/fsl_ls1046a-frwy
NAME:=NXP LS1046AFRWY
UBOOT_CONFIG:=ls1046afrwy_tfa
endef
define U-Boot/fsl_ls1046a-frwy-sdboot
NAME:=NXP LS1046AFRWY SD Card Boot
UBOOT_CONFIG:=ls1046afrwy_tfa
endef
layerscape: harmonize device strings OpenWrt lately has harmonized device (definition) names to the pattern vendor_model to improve overall consistency, also with other values like the DTS compatible. This patch applies that scheme to the layerscape target. Since this (intentionally) creates a bigger overlap between DTS names, compatible, and device definition name, it also moves DEVICE_DTS and SUPPORTED_DEVICES definitions to the Device/Default blocks. Apart from that, it also modifies several packages to use consistent naming in order to keep the $(1) file references working. While at it, remove one layer of complexity for the setup in tfa-layerscape package. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-07-20 13:34:04 +00:00
define U-Boot/fsl_ls1046a-rdb
layerscape: update u-boot to LSDK-18.06 The u-boot source code had been migrated to codeaurora for LSDK-18.06 release and the future release. This patch is to update u-boot to LSDK-18.06 for both uboot-layerscape and uboot-layerscape-armv8_32b packages. Besides, this patch also introduced some other changes. - Reworked uboot-layerscape makefile to make it more readable. - Define package in uboot-layerscape-armv8_32b for each board. - Fixed u-boot package selection in target image makefile. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2018-07-04 04:20:41 +00:00
NAME:=NXP LS1046ARDB
layerscape: convert to use TF-A for firmware This patch is to convert to use TF-A for firmware. - Use un-swapped rcw since swapping will be done in TF-A. - Use u-boot with TF-A defconfig. - Rework memory map for TF-A introduction. Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2019-05-06 03:26:09 +00:00
UBOOT_CONFIG:=ls1046ardb_tfa
layerscape: add 64b/32b target for ls1046ardb device Add support for NXP layerscape ls1046ardb 64b/32b Dev board. LS1046ARDB Specification: ------------------------- Memory subsystem: * 8GByte DDR4 SDRAM (64bit bus) * 512 Mbyte NAND flash * Two 64 Mbyte high-speed SPI flash * SD connector to interface with the SD memory card * On-board 4G eMMC Ethernet: * Two XFI 10G ports * Two SGMII ports * Two RGMII ports PCIe: * PCIe1 (SerDes2 Lane0) to miniPCIe slot * PCIe2 (SerDes2 Lane1) to x2 PCIe slot * PCIe3 (SerDes2 Lane2) to x4 PCIe slot * USB 3.0: one super speed USB 3.0 type A port, one Micro-AB port * UART: supports two UARTs up to 115200 bps for console Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-12-07 16:07:42 +00:00
endef
layerscape: harmonize device strings OpenWrt lately has harmonized device (definition) names to the pattern vendor_model to improve overall consistency, also with other values like the DTS compatible. This patch applies that scheme to the layerscape target. Since this (intentionally) creates a bigger overlap between DTS names, compatible, and device definition name, it also moves DEVICE_DTS and SUPPORTED_DEVICES definitions to the Device/Default blocks. Apart from that, it also modifies several packages to use consistent naming in order to keep the $(1) file references working. While at it, remove one layer of complexity for the setup in tfa-layerscape package. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-07-20 13:34:04 +00:00
define U-Boot/fsl_ls1046a-rdb-sdboot
layerscape: add SD card boot support NOR/QSPI Flash on Layerscape board only has limited 64MB memory size. Since some boards (ls1043ardb/ls1046ardb/ls1088ardb/ls1021atwr) could support SD card boot, we added SD boot support for them to put all things on SD card to meet large memory requirement. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2018-07-18 06:14:40 +00:00
NAME:=NXP LS1046ARDB SD Card Boot
layerscape: convert to use TF-A for firmware This patch is to convert to use TF-A for firmware. - Use un-swapped rcw since swapping will be done in TF-A. - Use u-boot with TF-A defconfig. - Rework memory map for TF-A introduction. Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2019-05-06 03:26:09 +00:00
UBOOT_CONFIG:=ls1046ardb_tfa
layerscape: add SD card boot support NOR/QSPI Flash on Layerscape board only has limited 64MB memory size. Since some boards (ls1043ardb/ls1046ardb/ls1088ardb/ls1021atwr) could support SD card boot, we added SD boot support for them to put all things on SD card to meet large memory requirement. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2018-07-18 06:14:40 +00:00
endef
layerscape: harmonize device strings OpenWrt lately has harmonized device (definition) names to the pattern vendor_model to improve overall consistency, also with other values like the DTS compatible. This patch applies that scheme to the layerscape target. Since this (intentionally) creates a bigger overlap between DTS names, compatible, and device definition name, it also moves DEVICE_DTS and SUPPORTED_DEVICES definitions to the Device/Default blocks. Apart from that, it also modifies several packages to use consistent naming in order to keep the $(1) file references working. While at it, remove one layer of complexity for the setup in tfa-layerscape package. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-07-20 13:34:04 +00:00
define U-Boot/fsl_ls1088a-rdb
layerscape: update u-boot to LSDK-18.06 The u-boot source code had been migrated to codeaurora for LSDK-18.06 release and the future release. This patch is to update u-boot to LSDK-18.06 for both uboot-layerscape and uboot-layerscape-armv8_32b packages. Besides, this patch also introduced some other changes. - Reworked uboot-layerscape makefile to make it more readable. - Define package in uboot-layerscape-armv8_32b for each board. - Fixed u-boot package selection in target image makefile. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2018-07-04 04:20:41 +00:00
NAME:=NXP LS1088ARDB
layerscape: convert to use TF-A for firmware This patch is to convert to use TF-A for firmware. - Use un-swapped rcw since swapping will be done in TF-A. - Use u-boot with TF-A defconfig. - Rework memory map for TF-A introduction. Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2019-05-06 03:26:09 +00:00
UBOOT_CONFIG:=ls1088ardb_tfa
layerscape: support all-in-one firmware for ls1088ardb/ls2088ardb Suppport all-in-one firmware for ls1088ardb/ls2088ardb by integrating u-boot/rcw/mc/dpl/restool. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2017-10-16 03:22:04 +00:00
endef
layerscape: harmonize device strings OpenWrt lately has harmonized device (definition) names to the pattern vendor_model to improve overall consistency, also with other values like the DTS compatible. This patch applies that scheme to the layerscape target. Since this (intentionally) creates a bigger overlap between DTS names, compatible, and device definition name, it also moves DEVICE_DTS and SUPPORTED_DEVICES definitions to the Device/Default blocks. Apart from that, it also modifies several packages to use consistent naming in order to keep the $(1) file references working. While at it, remove one layer of complexity for the setup in tfa-layerscape package. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-07-20 13:34:04 +00:00
define U-Boot/fsl_ls1088a-rdb-sdboot
layerscape: add SD card boot support NOR/QSPI Flash on Layerscape board only has limited 64MB memory size. Since some boards (ls1043ardb/ls1046ardb/ls1088ardb/ls1021atwr) could support SD card boot, we added SD boot support for them to put all things on SD card to meet large memory requirement. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2018-07-18 06:14:40 +00:00
NAME:=NXP LS1088ARDB SD Card Boot
layerscape: convert to use TF-A for firmware This patch is to convert to use TF-A for firmware. - Use un-swapped rcw since swapping will be done in TF-A. - Use u-boot with TF-A defconfig. - Rework memory map for TF-A introduction. Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2019-05-06 03:26:09 +00:00
UBOOT_CONFIG:=ls1088ardb_tfa
layerscape: add SD card boot support NOR/QSPI Flash on Layerscape board only has limited 64MB memory size. Since some boards (ls1043ardb/ls1046ardb/ls1088ardb/ls1021atwr) could support SD card boot, we added SD boot support for them to put all things on SD card to meet large memory requirement. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2018-07-18 06:14:40 +00:00
endef
layerscape: harmonize device strings OpenWrt lately has harmonized device (definition) names to the pattern vendor_model to improve overall consistency, also with other values like the DTS compatible. This patch applies that scheme to the layerscape target. Since this (intentionally) creates a bigger overlap between DTS names, compatible, and device definition name, it also moves DEVICE_DTS and SUPPORTED_DEVICES definitions to the Device/Default blocks. Apart from that, it also modifies several packages to use consistent naming in order to keep the $(1) file references working. While at it, remove one layer of complexity for the setup in tfa-layerscape package. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-07-20 13:34:04 +00:00
define U-Boot/fsl_ls2088a-rdb
layerscape: update u-boot to LSDK-18.06 The u-boot source code had been migrated to codeaurora for LSDK-18.06 release and the future release. This patch is to update u-boot to LSDK-18.06 for both uboot-layerscape and uboot-layerscape-armv8_32b packages. Besides, this patch also introduced some other changes. - Reworked uboot-layerscape makefile to make it more readable. - Define package in uboot-layerscape-armv8_32b for each board. - Fixed u-boot package selection in target image makefile. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2018-07-04 04:20:41 +00:00
NAME:=NXP LS2088ARDB
layerscape: convert to use TF-A for firmware This patch is to convert to use TF-A for firmware. - Use un-swapped rcw since swapping will be done in TF-A. - Use u-boot with TF-A defconfig. - Rework memory map for TF-A introduction. Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2019-05-06 03:26:09 +00:00
UBOOT_CONFIG:=ls2088ardb_tfa
layerscape: support all-in-one firmware for ls1088ardb/ls2088ardb Suppport all-in-one firmware for ls1088ardb/ls2088ardb by integrating u-boot/rcw/mc/dpl/restool. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2017-10-16 03:22:04 +00:00
endef
layerscape: add LX2160ARDB (Rev2.0 silicon) board support The QorIQ LX2160A reference design board provides a comprehensive platform that enables design and evaluation of the LX2160A processor. - Enables network intelligence with the next generation Datapath (DPPA2) which provides differentiated offload and a rich set of IO, including 10GE, 25GE, 40GE, and PCIe Gen4 - Delivers unprecedented efficiency and new virtualized networks - Supports designs in 5G packet processing, network function virtualization, storage controller, white box switching, network interface cards, and mobile edge computing - Supports all three LX2 family members (16-core LX2160A; 12-core LX2120A; and 8-core LX2080A) Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> [use AUTORELEASE, add dtb to firmware part] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-07-30 05:12:43 +00:00
define U-Boot/fsl_lx2160a-rdb
NAME:=NXP LX2160ARDB
UBOOT_CONFIG:=lx2160ardb_tfa
endef
define U-Boot/fsl_lx2160a-rdb-sdboot
NAME:=NXP LX2160ARDB SD Card Boot
UBOOT_CONFIG:=lx2160ardb_tfa
endef
layerscape: harmonize device strings OpenWrt lately has harmonized device (definition) names to the pattern vendor_model to improve overall consistency, also with other values like the DTS compatible. This patch applies that scheme to the layerscape target. Since this (intentionally) creates a bigger overlap between DTS names, compatible, and device definition name, it also moves DEVICE_DTS and SUPPORTED_DEVICES definitions to the Device/Default blocks. Apart from that, it also modifies several packages to use consistent naming in order to keep the $(1) file references working. While at it, remove one layer of complexity for the setup in tfa-layerscape package. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-07-20 13:34:04 +00:00
define U-Boot/fsl_ls1021a-twr
layerscape: add armv7 subtarget and ls1021atwr board support The NXP TWR-LS1021A module is a development system based on the QorIQ LS1021A processor. - This feature-rich, high-performance processor module can be used standalone or as part of an assembled Tower System development platform. - Incorporating dual Arm Cortex-A7 cores running up to 1 GHz, the TWR-LS1021A delivers an outstanding level of performance. - The TWR-LS1021A offers HDMI, SATA3 and USB3 connectors as well as a complete Linux software developer's package. - The module provides a comprehensive level of security that includes support for secure boot, Trust Architecture and tamper detection in both standby and active power modes, safeguarding the device from manufacture to deployment. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2018-07-10 03:58:59 +00:00
NAME:=NXP LS1021ATWR
BUILD_SUBTARGET:=armv7
UBOOT_CONFIG:=ls1021atwr_nor
ENV_SIZE:=0x20000
endef
layerscape: harmonize device strings OpenWrt lately has harmonized device (definition) names to the pattern vendor_model to improve overall consistency, also with other values like the DTS compatible. This patch applies that scheme to the layerscape target. Since this (intentionally) creates a bigger overlap between DTS names, compatible, and device definition name, it also moves DEVICE_DTS and SUPPORTED_DEVICES definitions to the Device/Default blocks. Apart from that, it also modifies several packages to use consistent naming in order to keep the $(1) file references working. While at it, remove one layer of complexity for the setup in tfa-layerscape package. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-07-20 13:34:04 +00:00
define U-Boot/fsl_ls1021a-twr-sdboot
layerscape: add SD card boot support NOR/QSPI Flash on Layerscape board only has limited 64MB memory size. Since some boards (ls1043ardb/ls1046ardb/ls1088ardb/ls1021atwr) could support SD card boot, we added SD boot support for them to put all things on SD card to meet large memory requirement. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2018-07-18 06:14:40 +00:00
NAME:=NXP LS1021ATWR SD Card Boot
BUILD_SUBTARGET:=armv7
UBOOT_CONFIG:=ls1021atwr_sdcard_ifc
UBOOT_IMAGE:=u-boot-with-spl-pbl.bin
ENV_SIZE:=0x20000
endef
layerscape: harmonize device strings OpenWrt lately has harmonized device (definition) names to the pattern vendor_model to improve overall consistency, also with other values like the DTS compatible. This patch applies that scheme to the layerscape target. Since this (intentionally) creates a bigger overlap between DTS names, compatible, and device definition name, it also moves DEVICE_DTS and SUPPORTED_DEVICES definitions to the Device/Default blocks. Apart from that, it also modifies several packages to use consistent naming in order to keep the $(1) file references working. While at it, remove one layer of complexity for the setup in tfa-layerscape package. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-07-20 13:34:04 +00:00
define U-Boot/fsl_ls1021a-iot-sdboot
layerscape: add LS1021AIOT board support The LS1021A-IoT gateway reference design based on the QorIQ LS1021A processor is a purpose-built, small footprint hardware platform with a wide array of high-speed connectivity and low-speed serial interfaces to support secure delivery of IoT services for home, business or other commercial location. - Combines standards-based, open source software with a feature-rich IoT gateway design to establish a common, open framework for secured IoT service delivery and management. - Provides a wide assortment of high-speed and serial-based connectivity in a compact, highly secure design. - High efficiency through the use of the Arm-based QorIQ LS1021A embedded processor. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: Biwen Li <biwen.li@nxp.com>
2018-11-02 10:30:57 +00:00
NAME:=NXP LS1021AIOT SD Card Boot
BUILD_SUBTARGET:=armv7
UBOOT_CONFIG:=ls1021aiot_sdcard
UBOOT_IMAGE:=u-boot-with-spl-pbl.bin
ENV_SIZE:=0x2000
endef
uboot-layerscape: switch to u-boot.mk Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-23 09:50:22 +00:00
UBOOT_TARGETS := \
layerscape: harmonize device strings OpenWrt lately has harmonized device (definition) names to the pattern vendor_model to improve overall consistency, also with other values like the DTS compatible. This patch applies that scheme to the layerscape target. Since this (intentionally) creates a bigger overlap between DTS names, compatible, and device definition name, it also moves DEVICE_DTS and SUPPORTED_DEVICES definitions to the Device/Default blocks. Apart from that, it also modifies several packages to use consistent naming in order to keep the $(1) file references working. While at it, remove one layer of complexity for the setup in tfa-layerscape package. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-07-20 13:34:04 +00:00
fsl_ls1012a-frdm \
fsl_ls1012a-rdb \
fsl_ls1012a-frwy-sdboot \
uboot-layerscape: Add ls1028ardb support Support uboot for NXP LS1028ARDB reference board. GIC V3 has to be disabled in the uboot config to allow booting upstream kernels. This patch can be dropped once uboot is updated to 2022.04 version to nxp-qoriq github lf-6.1.1 branch. Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@protonmail.ch>
2023-04-12 10:07:32 +00:00
fsl_ls1028a-rdb \
fsl_ls1028a-rdb-sdboot \
layerscape: harmonize device strings OpenWrt lately has harmonized device (definition) names to the pattern vendor_model to improve overall consistency, also with other values like the DTS compatible. This patch applies that scheme to the layerscape target. Since this (intentionally) creates a bigger overlap between DTS names, compatible, and device definition name, it also moves DEVICE_DTS and SUPPORTED_DEVICES definitions to the Device/Default blocks. Apart from that, it also modifies several packages to use consistent naming in order to keep the $(1) file references working. While at it, remove one layer of complexity for the setup in tfa-layerscape package. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-07-20 13:34:04 +00:00
fsl_ls1043a-rdb \
fsl_ls1043a-rdb-sdboot \
layerscape: add FRWY-LS1046A board support The LS1046A Freeway board (FRWY) is a high-performance computing, evaluation, and development platform that supports the QorIQ LS1046A architecture processor capable of support more than 32,000 CoreMark performance. The FRWY-LS1046A board supports the QorIQ LS1046A processor, onboard DDR4 memory, multiple Gigabit Ethernet, USB3.0 and M2_Type_E interfaces for Wi-Fi. The FRWY-LS1046A-TP includes the Coral Tensor Flow Processing Unit that offloads AI/ML inferencing from the CPU to provide significant boost for AI/ML applications. The FRWY-LS1046A-TP includes one M.2 TPU module and more modules can easily be added including USB versions of the module to scale the AI/ML performance. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> [rebase, use AUTORELEASE, fix sorting, add dtb to firmware part] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-08-03 04:52:22 +00:00
fsl_ls1046a-frwy \
fsl_ls1046a-frwy-sdboot \
layerscape: harmonize device strings OpenWrt lately has harmonized device (definition) names to the pattern vendor_model to improve overall consistency, also with other values like the DTS compatible. This patch applies that scheme to the layerscape target. Since this (intentionally) creates a bigger overlap between DTS names, compatible, and device definition name, it also moves DEVICE_DTS and SUPPORTED_DEVICES definitions to the Device/Default blocks. Apart from that, it also modifies several packages to use consistent naming in order to keep the $(1) file references working. While at it, remove one layer of complexity for the setup in tfa-layerscape package. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-07-20 13:34:04 +00:00
fsl_ls1046a-rdb \
fsl_ls1046a-rdb-sdboot \
fsl_ls1088a-rdb \
fsl_ls1088a-rdb-sdboot \
fsl_ls2088a-rdb \
layerscape: add LX2160ARDB (Rev2.0 silicon) board support The QorIQ LX2160A reference design board provides a comprehensive platform that enables design and evaluation of the LX2160A processor. - Enables network intelligence with the next generation Datapath (DPPA2) which provides differentiated offload and a rich set of IO, including 10GE, 25GE, 40GE, and PCIe Gen4 - Delivers unprecedented efficiency and new virtualized networks - Supports designs in 5G packet processing, network function virtualization, storage controller, white box switching, network interface cards, and mobile edge computing - Supports all three LX2 family members (16-core LX2160A; 12-core LX2120A; and 8-core LX2080A) Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> [use AUTORELEASE, add dtb to firmware part] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-07-30 05:12:43 +00:00
fsl_lx2160a-rdb \
fsl_lx2160a-rdb-sdboot \
layerscape: harmonize device strings OpenWrt lately has harmonized device (definition) names to the pattern vendor_model to improve overall consistency, also with other values like the DTS compatible. This patch applies that scheme to the layerscape target. Since this (intentionally) creates a bigger overlap between DTS names, compatible, and device definition name, it also moves DEVICE_DTS and SUPPORTED_DEVICES definitions to the Device/Default blocks. Apart from that, it also modifies several packages to use consistent naming in order to keep the $(1) file references working. While at it, remove one layer of complexity for the setup in tfa-layerscape package. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-07-20 13:34:04 +00:00
fsl_ls1021a-twr \
fsl_ls1021a-twr-sdboot \
fsl_ls1021a-iot-sdboot
layerscape: add 64b/32b target for ls1043ardb device Add support for NXP layerscape ls1043ardb 64b/32b Dev board. LS1043a is an SoC with 4x64-bit up to 1.6 GHz ARMv8 A53 cores. ls1043ardb support features as: 2GB DDR4, 128MB NOR/512MB NAND, USB3.0, eSDHC, I2C, GPIO, PCIe/Mini-PCIe, 6x1G/1x10G network port, etc. 64b/32b ls1043ardb target is using 4.4 kernel, and rcw/u-boot/fman images from NXP QorIQ SDK release. All of 4.4 kernel patches porting from SDK release or upstream. QorIQ SDK ISOs can be downloaded from this location: http://www.nxp.com/products/software-and-tools/run-time-software/linux-sdk/linux-sdk-for-qoriq-processors:SDKLINUX Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-10-28 16:14:32 +00:00
uboot-layerscape: switch to u-boot.mk Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-23 09:50:22 +00:00
define Build/InstallDev
layerscape: put u-boot and ucode images into image staging directory Do not put the u-boot and ucode images into the kernel build directory as this directory might get removed after kernel updates while the u-boot packages InstallDev recipe is not getting re-executed because it is still considered current, leading to image build failures later on due to missing images. To ensure that built bootloader images persist over kernel version updates in the buildroot, put them into the new STAGING_DIR_IMAGE directory. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-01-27 15:06:31 +00:00
$(INSTALL_DIR) $(STAGING_DIR_IMAGE)
layerscape: update u-boot to LSDK-18.06 The u-boot source code had been migrated to codeaurora for LSDK-18.06 release and the future release. This patch is to update u-boot to LSDK-18.06 for both uboot-layerscape and uboot-layerscape-armv8_32b packages. Besides, this patch also introduced some other changes. - Reworked uboot-layerscape makefile to make it more readable. - Define package in uboot-layerscape-armv8_32b for each board. - Fixed u-boot package selection in target image makefile. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2018-07-04 04:20:41 +00:00
$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(UBOOT_IMAGE) \
$(STAGING_DIR_IMAGE)/$(BUILD_VARIANT)-uboot.bin
layerscape: add u-boot environment support for OpenWrt boot This patch is to implement u-boot environment txt files to support OpenWrt boot for all layerscape devices. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2018-07-17 09:42:47 +00:00
$(PKG_BUILD_DIR)/tools/mkenvimage -s $(ENV_SIZE) \
-o $(STAGING_DIR_IMAGE)/$(BUILD_VARIANT)-uboot-env.bin \
files/$(BUILD_VARIANT)-uEnv.txt
layerscape: add 64b/32b target for ls1043ardb device Add support for NXP layerscape ls1043ardb 64b/32b Dev board. LS1043a is an SoC with 4x64-bit up to 1.6 GHz ARMv8 A53 cores. ls1043ardb support features as: 2GB DDR4, 128MB NOR/512MB NAND, USB3.0, eSDHC, I2C, GPIO, PCIe/Mini-PCIe, 6x1G/1x10G network port, etc. 64b/32b ls1043ardb target is using 4.4 kernel, and rcw/u-boot/fman images from NXP QorIQ SDK release. All of 4.4 kernel patches porting from SDK release or upstream. QorIQ SDK ISOs can be downloaded from this location: http://www.nxp.com/products/software-and-tools/run-time-software/linux-sdk/linux-sdk-for-qoriq-processors:SDKLINUX Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-10-28 16:14:32 +00:00
endef
uboot-layerscape: switch to u-boot.mk Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-23 09:50:22 +00:00
define Package/u-boot/install/default
layerscape: add 64b/32b target for ls1043ardb device Add support for NXP layerscape ls1043ardb 64b/32b Dev board. LS1043a is an SoC with 4x64-bit up to 1.6 GHz ARMv8 A53 cores. ls1043ardb support features as: 2GB DDR4, 128MB NOR/512MB NAND, USB3.0, eSDHC, I2C, GPIO, PCIe/Mini-PCIe, 6x1G/1x10G network port, etc. 64b/32b ls1043ardb target is using 4.4 kernel, and rcw/u-boot/fman images from NXP QorIQ SDK release. All of 4.4 kernel patches porting from SDK release or upstream. QorIQ SDK ISOs can be downloaded from this location: http://www.nxp.com/products/software-and-tools/run-time-software/linux-sdk/linux-sdk-for-qoriq-processors:SDKLINUX Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-10-28 16:14:32 +00:00
endef
uboot-layerscape: switch to u-boot.mk Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-23 09:50:22 +00:00
$(eval $(call BuildPackage/U-Boot))
Reference in New Issue Copy Permalink