openwrt/target/linux/bcm27xx/patches-6.6/950-0755-ASoC-Adds-support-for-TAS575x-to-the-pcm512x-driver.patch

From bdfb5d0a2a07259cfcb213f5c63ba649a17f3a35 Mon Sep 17 00:00:00 2001
From: Joerg Schambacher <joerg.hifiberry@gmail.com>
Date: Fri, 29 Sep 2023 17:07:20 +0200
Subject: [PATCH 0755/1085] ASoC: Adds support for TAS575x to the pcm512x
 driver

commit 1f817805262c2c34142291da376d4932d3c493bc upstream.

Enables the existing pcm512x driver to control the almost
compatible TAS5754 and -76 amplifers. Both amplifiers support
only an I2C interface and the internal PLL must be always
on to provide necessary clocks to the amplifier section.
Tested on TAS5756 with support from Andreas Arbesser-Krasser
from Texas Instruments <a-krasser@ti.com>

Signed-off-by: Joerg Schambacher <joerg.hifiberry@gmail.com>
Link: https://lore.kernel.org/r/20230929150722.405415-1-joerg.hifiberry@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 sound/soc/codecs/pcm512x-i2c.c |  4 ++++
 sound/soc/codecs/pcm512x.c     | 36 +++++++++++++++++++++++++++++++---
 2 files changed, 37 insertions(+), 3 deletions(-)

--- a/sound/soc/codecs/pcm512x-i2c.c
+++ b/sound/soc/codecs/pcm512x-i2c.c
@@ -39,6 +39,8 @@ static const struct i2c_device_id pcm512
 	{ "pcm5122", },
 	{ "pcm5141", },
 	{ "pcm5142", },
+	{ "tas5754", },
+	{ "tas5756", },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, pcm512x_i2c_id);
@@ -49,6 +51,8 @@ static const struct of_device_id pcm512x
 	{ .compatible = "ti,pcm5122", },
 	{ .compatible = "ti,pcm5141", },
 	{ .compatible = "ti,pcm5142", },
+	{ .compatible = "ti,tas5754", },
+	{ .compatible = "ti,tas5756", },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, pcm512x_of_match);
--- a/sound/soc/codecs/pcm512x.c
+++ b/sound/soc/codecs/pcm512x.c
@@ -48,6 +48,7 @@ struct pcm512x_priv {
 	int mute;
 	struct mutex mutex;
 	unsigned int bclk_ratio;
+	int force_pll_on;
 };
 
 /*
@@ -1258,10 +1259,34 @@ static int pcm512x_hw_params(struct snd_
 			return ret;
 		}
 
-		ret = regmap_update_bits(pcm512x->regmap, PCM512x_PLL_EN,
-					 PCM512x_PLLE, 0);
+		if (!pcm512x->force_pll_on) {
+			ret = regmap_update_bits(pcm512x->regmap,
+						 PCM512x_PLL_EN, PCM512x_PLLE, 0);
+		} else {
+			/* provide minimum PLL config for TAS575x clocking
+			 * and leave PLL enabled
+			 */
+			ret = regmap_write(pcm512x->regmap,
+					   PCM512x_PLL_COEFF_0, 0x01);
+			if (ret != 0) {
+				dev_err(component->dev,
+					"Failed to set pll coefficient: %d\n", ret);
+				return ret;
+			}
+			ret = regmap_write(pcm512x->regmap,
+					   PCM512x_PLL_COEFF_1, 0x04);
+			if (ret != 0) {
+				dev_err(component->dev,
+					"Failed to set pll coefficient: %d\n", ret);
+				return ret;
+			}
+			ret = regmap_write(pcm512x->regmap,
+					   PCM512x_PLL_EN, 0x01);
+			dev_dbg(component->dev, "Enabling PLL for TAS575x\n");
+		}
+
 		if (ret != 0) {
-			dev_err(component->dev, "Failed to disable pll: %d\n", ret);
+			dev_err(component->dev, "Failed to set pll mode: %d\n", ret);
 			return ret;
 		}
 	}
@@ -1659,6 +1684,11 @@ int pcm512x_probe(struct device *dev, st
 			ret = -EINVAL;
 			goto err_pm;
 		}
+
+		if (!strcmp(np->name, "tas5756") ||
+		    !strcmp(np->name, "tas5754"))
+			pcm512x->force_pll_on = 1;
+		dev_dbg(dev, "Device ID: %s\n", np->name);
 	}
 #endif