openwrt/target/linux/kirkwood/patches-4.3/140-ea4500.patch

--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -176,6 +176,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
 	kirkwood-is2.dtb \
 	kirkwood-km_kirkwood.dtb \
 	kirkwood-laplug.dtb \
+	kirkwood-linksys-viper.dtb \
 	kirkwood-lschlv2.dtb \
 	kirkwood-lswvl.dtb \
 	kirkwood-lswxl.dtb \
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-linksys-viper.dts
@@ -0,0 +1,187 @@
+/*
+ * kirkwood-linksys-viper.dts - Device Tree file for Linksys EA4500
+ *
+ * (c) 2013 Jonas Gorski <jogo@openwrt.org>
+ * (c) 2013 Deutsche Telekom Innovation Laboratories
+ * (c) 2014 Luka Perkov <luka@openwrt.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+
+/ {
+	model = "Linksys E4200v2 / EA4500";
+	compatible = "linksys,viper", "marvell,kirkwood-88f6282", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+	};
+
+	mbus {
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+
+			pcie@2,0 {
+				status = "okay";
+			};
+		};
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_led_white_health: pmx-led-white-health {
+				marvell,pins = "mpp7";
+				marvell,function = "gpo";
+			};
+			pmx_led_white_pulse: pmx-led-white-pulse {
+				marvell,pins = "mpp14";
+				marvell,function = "gpio";
+			};
+			pmx_btn_wps: pmx-btn-wps {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+			pmx_btn_reset: pmx-btn-reset {
+				marvell,pins = "mpp48";
+				marvell,function = "gpio";
+			};
+		};
+
+		rtc@10300 {
+			status = "disabled";
+		};
+
+		serial@12000 {
+			status = "okay";
+		};
+
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = < &pmx_btn_wps &pmx_btn_reset >;
+		pinctrl-names = "default";
+
+		button@15 {
+			label = "WPS Button";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+		};
+
+		button@16 {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = < &pmx_led_white_health &pmx_led_white_pulse >;
+		pinctrl-names = "default";
+
+		white-health {
+			label = "viper:white:health";
+			gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		white-pulse {
+			label = "viper:white:pulse";
+			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	mvsw61xx {
+		compatible = "marvell,88e6171";
+		status = "okay";
+		reg = <0x10>;
+
+		mii-bus = <&mdio>;
+		cpu-port-0 = <5>;
+		cpu-port-1 = <6>;
+		is-indirect;
+	};
+};
+
+&nand {
+	status = "okay";
+	pinctrl-0 = <&pmx_nand>;
+	pinctrl-names = "default";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0 0x80000>;
+	};
+
+	partition@80000 {
+		label = "u_env";
+		reg = <0x80000 0x20000>;
+	};
+
+	partition@a0000 {
+		label = "s_env";
+		reg = <0xa0000 0x20000>;
+	};
+
+	partition@200000 {
+		label = "kernel1";
+		reg = <0x200000 0x1a00000>;
+	};
+
+	partition@4a0000 {
+		label = "rootfs1";
+		reg = <0x4a0000 0x1760000>;
+	};
+
+	partition@1c00000 {
+		label = "kernel2";
+		reg = <0x1c00000 0x1a00000>;
+	};
+
+	partition@1ea0000 {
+		label = "rootfs2";
+		reg = <0x1ea0000 0x1760000>;
+	};
+
+	partition@3600000 {
+		label = "syscfg";
+		reg = <0x3600000 0x4a00000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		speed = <1000>;
+		duplex = <1>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+	ethernet1-port@0 {
+		speed = <1000>;
+		duplex = <1>;
+	};
+};