openwrt/target/linux/bcm27xx/patches-6.1/950-1226-i2c-designware-Look-for-CNT-values-in-DT.patch

From 0a09088e24c013ef608b1bb79501ef890cefc767 Mon Sep 17 00:00:00 2001
From: Phil Elwell <phil@raspberrypi.com>
Date: Tue, 19 Dec 2023 11:16:25 +0000
Subject: [PATCH] i2c: designware: Look for *CNT values in DT

The i2c-designware driver supports reading precise timing values from
ACPI, but the Device Tree support relies on a combination of standard
rise and fall times and hard-coded minimum timings. The result of this
is that it is difficult to get optimum timings, particularly given that
the values are bus speed-specific and only one set can be stored in
DT at a time.

Add support for initialisation from DT that is similar to that for
ACPI.

Signed-off-by: Phil Elwell <phil@raspberrypi.com>
---
 drivers/i2c/busses/i2c-designware-platdrv.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -132,9 +132,18 @@ static int mscc_twi_set_sda_hold_time(st
 	return 0;
 }
 
+static void dw_i2c_read_of_cnt(struct device_node *np, const char *name, u16 *pval)
+{
+	u32 val;
+
+	if (!of_property_read_u32(np, name, &val))
+		*pval = (u16)val;
+}
+
 static int dw_i2c_of_configure(struct platform_device *pdev)
 {
 	struct dw_i2c_dev *dev = platform_get_drvdata(pdev);
+	struct device_node *np = pdev->dev.of_node;
 
 	switch (dev->flags & MODEL_MASK) {
 	case MODEL_MSCC_OCELOT:
@@ -146,6 +155,15 @@ static int dw_i2c_of_configure(struct pl
 		break;
 	}
 
+	dw_i2c_read_of_cnt(np, "snps,ss_hcnt", &dev->ss_hcnt);
+	dw_i2c_read_of_cnt(np, "snps,ss_lcnt", &dev->ss_lcnt);
+	dw_i2c_read_of_cnt(np, "snps,fs_hcnt", &dev->fs_hcnt);
+	dw_i2c_read_of_cnt(np, "snps,fs_lcnt", &dev->fs_lcnt);
+	dw_i2c_read_of_cnt(np, "snps,fp_hcnt", &dev->fp_hcnt);
+	dw_i2c_read_of_cnt(np, "snps,fp_lcnt", &dev->fp_lcnt);
+	dw_i2c_read_of_cnt(np, "snps,hs_hcnt", &dev->hs_hcnt);
+	dw_i2c_read_of_cnt(np, "snps,hs_lcnt", &dev->hs_lcnt);
+
 	return 0;
 }