openwrt/target/linux/bcm27xx/patches-6.1/950-0897-hwmon-Add-RP1-ADC-and-temperature-driver.patch

From cad3c92ff0c1a5fa539d08b695b0f6b326924890 Mon Sep 17 00:00:00 2001
From: Phil Elwell <phil@raspberrypi.com>
Date: Thu, 2 Mar 2023 18:04:42 +0000
Subject: [PATCH] hwmon: Add RP1 ADC and temperature driver

Signed-off-by: Phil Elwell <phil@raspberrypi.com>
---
 drivers/hwmon/Kconfig   |   7 +
 drivers/hwmon/Makefile  |   1 +
 drivers/hwmon/rp1-adc.c | 301 ++++++++++++++++++++++++++++++++++++++++
 3 files changed, 309 insertions(+)
 create mode 100644 drivers/hwmon/rp1-adc.c

--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -2331,6 +2331,13 @@ config SENSORS_INTEL_M10_BMC_HWMON
 	  sensors monitor various telemetry data of different components on the
 	  card, e.g. board temperature, FPGA core temperature/voltage/current.
 
+config SENSORS_RP1_ADC
+	tristate "RP1 ADC and temperature sensor driver"
+	depends on MFD_RP1
+	help
+	  Say yes here to enable support for the voltage and temperature
+	  sensors of the Raspberry Pi RP1 peripheral chip.
+
 if ACPI
 
 comment "ACPI drivers"
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -173,6 +173,7 @@ obj-$(CONFIG_SENSORS_PCF8591)	+= pcf8591
 obj-$(CONFIG_SENSORS_POWR1220)  += powr1220.o
 obj-$(CONFIG_SENSORS_PWM_FAN)	+= pwm-fan.o
 obj-$(CONFIG_SENSORS_RASPBERRYPI_HWMON)	+= raspberrypi-hwmon.o
+obj-$(CONFIG_SENSORS_RP1_ADC)	+= rp1-adc.o
 obj-$(CONFIG_SENSORS_S3C)	+= s3c-hwmon.o
 obj-$(CONFIG_SENSORS_SBTSI)	+= sbtsi_temp.o
 obj-$(CONFIG_SENSORS_SBRMI)	+= sbrmi.o
--- /dev/null
+++ b/drivers/hwmon/rp1-adc.c
@@ -0,0 +1,301 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Driver for the RP1 ADC and temperature sensor
+ * Copyright (C) 2023 Raspberry Pi Ltd.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+
+#define MODULE_NAME	"rp1-adc"
+
+#define RP1_ADC_CS		0x00
+#define RP1_ADC_RESULT		0x04
+#define RP1_ADC_FCS		0x08
+#define RP1_ADC_FIFO		0x0c
+#define RP1_ADC_DIV		0x10
+
+#define RP1_ADC_INTR		0x14
+#define RP1_ADC_INTE		0x18
+#define RP1_ADC_INTF		0x1c
+#define RP1_ADC_INTS		0x20
+
+#define RP1_ADC_RWTYPE_SET	0x2000
+#define RP1_ADC_RWTYPE_CLR	0x3000
+
+#define RP1_ADC_CS_RROBIN_MASK	0x1f
+#define RP1_ADC_CS_RROBIN_SHIFT	16
+#define RP1_ADC_CS_AINSEL_MASK	0x7
+#define RP1_ADC_CS_AINSEL_SHIFT	12
+#define RP1_ADC_CS_ERR_STICKY	0x400
+#define RP1_ADC_CS_ERR		0x200
+#define RP1_ADC_CS_READY	0x100
+#define RP1_ADC_CS_START_MANY	0x8
+#define RP1_ADC_CS_START_ONCE	0x4
+#define RP1_ADC_CS_TS_EN	0x2
+#define RP1_ADC_CS_EN		0x1
+
+#define RP1_ADC_FCS_THRESH_MASK	0xf
+#define RP1_ADC_FCS_THRESH_SHIFT	24
+#define RP1_ADC_FCS_LEVEL_MASK	0xf
+#define RP1_ADC_FCS_LEVEL_SHIFT	16
+#define RP1_ADC_FCS_OVER	0x800
+#define RP1_ADC_FCS_UNDER	0x400
+#define RP1_ADC_FCS_FULL	0x200
+#define RP1_ADC_FCS_EMPTY	0x100
+#define RP1_ADC_FCS_DREQ_EN	0x8
+#define RP1_ADC_FCS_ERR		0x4
+#define RP1_ADC_FCS_SHIFR	0x2
+#define RP1_ADC_FCS_EN		0x1
+
+#define RP1_ADC_FIFO_ERR	0x8000
+#define RP1_ADC_FIFO_VAL_MASK	0xfff
+
+#define RP1_ADC_DIV_INT_MASK	0xffff
+#define RP1_ADC_DIV_INT_SHIFT	8
+#define RP1_ADC_DIV_FRAC_MASK	0xff
+#define RP1_ADC_DIV_FRAC_SHIFT	0
+
+struct rp1_adc_data {
+	void __iomem *base;
+	spinlock_t lock;
+	struct device *hwmon_dev;
+	int vref_mv;
+};
+
+static int rp1_adc_ready_wait(struct rp1_adc_data *data)
+{
+	int retries = 10;
+
+	while (retries && !(readl(data->base + RP1_ADC_CS) & RP1_ADC_CS_READY))
+		retries--;
+
+	return retries ? 0 : -EIO;
+}
+
+static int rp1_adc_read(struct rp1_adc_data *data,
+			struct device_attribute *devattr, unsigned int *val)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	int channel = attr->index;
+	int ret;
+
+	spin_lock(&data->lock);
+
+	writel(RP1_ADC_CS_AINSEL_MASK << RP1_ADC_CS_AINSEL_SHIFT,
+	       data->base + RP1_ADC_RWTYPE_CLR + RP1_ADC_CS);
+	writel(channel << RP1_ADC_CS_AINSEL_SHIFT,
+	       data->base + RP1_ADC_RWTYPE_SET + RP1_ADC_CS);
+	writel(RP1_ADC_CS_START_ONCE,
+	       data->base + RP1_ADC_RWTYPE_SET + RP1_ADC_CS);
+
+	ret = rp1_adc_ready_wait(data);
+	if (!ret)
+		*val = readl(data->base + RP1_ADC_RESULT);
+
+	spin_unlock(&data->lock);
+
+	return ret;
+}
+
+static int rp1_adc_to_mv(struct rp1_adc_data *data, unsigned int val)
+{
+	return ((u64)data->vref_mv * val) / 0xfff;
+}
+
+static ssize_t rp1_adc_show(struct device *dev,
+			    struct device_attribute *devattr,
+			    char *buf)
+{
+	struct rp1_adc_data *data = dev_get_drvdata(dev);
+	unsigned int val;
+	int ret;
+
+	ret = rp1_adc_read(data, devattr, &val);
+	if (ret)
+		return ret;
+
+	return sprintf(buf, "%d\n", rp1_adc_to_mv(data, val));
+}
+
+static ssize_t rp1_adc_temp_show(struct device *dev,
+				 struct device_attribute *devattr,
+				 char *buf)
+{
+	struct rp1_adc_data *data = dev_get_drvdata(dev);
+	unsigned int val;
+	int ret, mv, mc;
+
+	writel(RP1_ADC_CS_TS_EN,
+	       data->base + RP1_ADC_RWTYPE_SET + RP1_ADC_CS);
+	ret = rp1_adc_read(data, devattr, &val);
+	if (ret)
+		return ret;
+
+	mv = rp1_adc_to_mv(data, val);
+
+	/* T = 27 - (ADC_voltage - 0.706)/0.001721 */
+
+	mc = 27000 - DIV_ROUND_CLOSEST((mv - 706) * (s64)1000000, 1721);
+
+	return sprintf(buf, "%d\n", mc);
+}
+
+static ssize_t rp1_adc_raw_show(struct device *dev,
+				struct device_attribute *devattr,
+				char *buf)
+{
+	struct rp1_adc_data *data = dev_get_drvdata(dev);
+	unsigned int val;
+	int ret = rp1_adc_read(data, devattr, &val);
+
+	if (ret)
+		return ret;
+
+	return sprintf(buf, "%u\n", val);
+}
+
+static ssize_t rp1_adc_temp_raw_show(struct device *dev,
+				     struct device_attribute *devattr,
+				     char *buf)
+{
+	struct rp1_adc_data *data = dev_get_drvdata(dev);
+	unsigned int val;
+	int ret = rp1_adc_read(data, devattr, &val);
+
+	if (ret)
+		return ret;
+
+	return sprintf(buf, "%u\n", val);
+}
+
+static SENSOR_DEVICE_ATTR_RO(in1_input, rp1_adc, 0);
+static SENSOR_DEVICE_ATTR_RO(in2_input, rp1_adc, 1);
+static SENSOR_DEVICE_ATTR_RO(in3_input, rp1_adc, 2);
+static SENSOR_DEVICE_ATTR_RO(in4_input, rp1_adc, 3);
+static SENSOR_DEVICE_ATTR_RO(temp1_input, rp1_adc_temp, 4);
+static SENSOR_DEVICE_ATTR_RO(in1_raw, rp1_adc_raw, 0);
+static SENSOR_DEVICE_ATTR_RO(in2_raw, rp1_adc_raw, 1);
+static SENSOR_DEVICE_ATTR_RO(in3_raw, rp1_adc_raw, 2);
+static SENSOR_DEVICE_ATTR_RO(in4_raw, rp1_adc_raw, 3);
+static SENSOR_DEVICE_ATTR_RO(temp1_raw, rp1_adc_temp_raw, 4);
+
+static struct attribute *rp1_adc_attrs[] = {
+	&sensor_dev_attr_in1_input.dev_attr.attr,
+	&sensor_dev_attr_in2_input.dev_attr.attr,
+	&sensor_dev_attr_in3_input.dev_attr.attr,
+	&sensor_dev_attr_in4_input.dev_attr.attr,
+	&sensor_dev_attr_temp1_input.dev_attr.attr,
+	&sensor_dev_attr_in1_raw.dev_attr.attr,
+	&sensor_dev_attr_in2_raw.dev_attr.attr,
+	&sensor_dev_attr_in3_raw.dev_attr.attr,
+	&sensor_dev_attr_in4_raw.dev_attr.attr,
+	&sensor_dev_attr_temp1_raw.dev_attr.attr,
+	NULL
+};
+
+static umode_t rp1_adc_is_visible(struct kobject *kobj,
+				  struct attribute *attr, int index)
+{
+	return 0444;
+}
+
+static const struct attribute_group rp1_adc_group = {
+	.attrs = rp1_adc_attrs,
+	.is_visible = rp1_adc_is_visible,
+};
+__ATTRIBUTE_GROUPS(rp1_adc);
+
+static int __init rp1_adc_probe(struct platform_device *pdev)
+{
+	struct rp1_adc_data *data;
+	struct regulator *reg;
+	struct clk *clk;
+	int vref_uv, ret;
+
+	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	spin_lock_init(&data->lock);
+
+	data->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(data->base))
+		return PTR_ERR(data->base);
+
+	platform_set_drvdata(pdev, data);
+
+	clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(clk))
+		return -ENODEV;
+
+	clk_set_rate(clk, 50000000);
+	clk_prepare_enable(clk);
+
+	reg = devm_regulator_get(&pdev->dev, "vref");
+	if (IS_ERR(reg))
+		return PTR_ERR(reg);
+
+	vref_uv = regulator_get_voltage(reg);
+	data->vref_mv = DIV_ROUND_CLOSEST(vref_uv, 1000);
+
+	data->hwmon_dev =
+	    devm_hwmon_device_register_with_groups(&pdev->dev,
+						   "rp1_adc",
+						   data,
+						   rp1_adc_groups);
+	if (IS_ERR(data->hwmon_dev)) {
+		ret = PTR_ERR(data->hwmon_dev);
+		dev_err(&pdev->dev, "hwmon_device_register failed with %d.\n", ret);
+		goto err_register;
+	}
+
+	/* Disable interrupts */
+	writel(0, data->base + RP1_ADC_INTE);
+
+	/* Enable the block, clearing any sticky error */
+	writel(RP1_ADC_CS_EN | RP1_ADC_CS_ERR_STICKY, data->base + RP1_ADC_CS);
+
+	return 0;
+
+err_register:
+	sysfs_remove_group(&pdev->dev.kobj, &rp1_adc_group);
+
+	return ret;
+}
+
+static int rp1_adc_remove(struct platform_device *pdev)
+{
+	struct rp1_adc_data *data = platform_get_drvdata(pdev);
+
+	hwmon_device_unregister(data->hwmon_dev);
+
+	return 0;
+}
+
+static const struct of_device_id rp1_adc_dt_ids[] = {
+	{ .compatible = "raspberrypi,rp1-adc", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, rp1_adc_dt_ids);
+
+static struct platform_driver rp1_adc_driver = {
+	.remove		= rp1_adc_remove,
+	.driver		= {
+		.name	= MODULE_NAME,
+		.of_match_table = rp1_adc_dt_ids,
+	},
+};
+
+module_platform_driver_probe(rp1_adc_driver, rp1_adc_probe);
+
+MODULE_DESCRIPTION("RP1 ADC driver");
+MODULE_AUTHOR("Phil Elwell <phil@raspberrypi.com>");
+MODULE_LICENSE("GPL");