mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-23 07:22:33 +00:00
1138 lines
31 KiB
Diff
1138 lines
31 KiB
Diff
|
From ec589c88e88452a80a20ad4ebc90e8fe5d80e7cd Mon Sep 17 00:00:00 2001
|
||
|
From: Florian Meier <florian.meier@koalo.de>
|
||
|
Date: Fri, 22 Nov 2013 14:33:38 +0100
|
||
|
Subject: [PATCH 030/114] ASoC: Add support for BCM2708
|
||
|
|
||
|
This driver adds support for digital audio (I2S)
|
||
|
for the BCM2708 SoC that is used by the
|
||
|
Raspberry Pi. External audio codecs can be
|
||
|
connected to the Raspberry Pi via P5 header.
|
||
|
|
||
|
It relies on cyclic DMA engine support for BCM2708.
|
||
|
|
||
|
Signed-off-by: Florian Meier <florian.meier@koalo.de>
|
||
|
|
||
|
ASoC: BCM2708: Add 24 bit support
|
||
|
|
||
|
This adds 24 bit support to the I2S driver of the BCM2708.
|
||
|
Besides enabling the 24 bit flags, it includes two bug fixes:
|
||
|
|
||
|
MMAP is not supported. Claiming this leads to strange issues
|
||
|
when the format of driver and file do not match.
|
||
|
|
||
|
The datasheet states that the width extension bit should be set
|
||
|
for widths greater than 24, but greater or equal would be correct.
|
||
|
This follows from the definition of the width field.
|
||
|
|
||
|
Signed-off-by: Florian Meier <florian.meier@koalo.de>
|
||
|
|
||
|
bcm2708-i2s: Update bclk_ratio to more correct values
|
||
|
|
||
|
Move GPIO setup to hw_params.
|
||
|
|
||
|
This is used to stop the I2S driver from breaking
|
||
|
the GPIO setup for other uses of the PCM interface
|
||
|
|
||
|
Configure GPIOs for I2S based on revision/card settings
|
||
|
|
||
|
With RPi model B+, assignment of the I2S GPIO pins has changed.
|
||
|
This patch uses the board revision to auto-detect the GPIOs used
|
||
|
for I2S. It also allows sound card drivers to set the GPIOs that
|
||
|
should be used. This is especially important with the Compute
|
||
|
Module.
|
||
|
|
||
|
bcm2708-i2s: Avoid leak from iomap when accessing gpio
|
||
|
|
||
|
bcm2708: Eliminate i2s debugfs directory error
|
||
|
|
||
|
Qualify the two regmap ranges uses by bcm2708-i2s ('-i2s' and '-clk')
|
||
|
to avoid the name clash when registering debugfs entries.
|
||
|
---
|
||
|
sound/soc/bcm/Kconfig | 11 +
|
||
|
sound/soc/bcm/Makefile | 4 +
|
||
|
sound/soc/bcm/bcm2708-i2s.c | 998 ++++++++++++++++++++++++++++++++++++++++++++
|
||
|
sound/soc/bcm/bcm2708-i2s.h | 35 ++
|
||
|
4 files changed, 1048 insertions(+)
|
||
|
create mode 100644 sound/soc/bcm/bcm2708-i2s.c
|
||
|
create mode 100644 sound/soc/bcm/bcm2708-i2s.h
|
||
|
|
||
|
diff --git a/sound/soc/bcm/Kconfig b/sound/soc/bcm/Kconfig
|
||
|
index 6a834e1..7e5b945 100644
|
||
|
--- a/sound/soc/bcm/Kconfig
|
||
|
+++ b/sound/soc/bcm/Kconfig
|
||
|
@@ -7,3 +7,14 @@ config SND_BCM2835_SOC_I2S
|
||
|
Say Y or M if you want to add support for codecs attached to
|
||
|
the BCM2835 I2S interface. You will also need
|
||
|
to select the audio interfaces to support below.
|
||
|
+
|
||
|
+config SND_BCM2708_SOC_I2S
|
||
|
+ tristate "SoC Audio support for the Broadcom BCM2708 I2S module"
|
||
|
+ depends on MACH_BCM2708
|
||
|
+ select REGMAP_MMIO
|
||
|
+ select SND_SOC_DMAENGINE_PCM
|
||
|
+ select SND_SOC_GENERIC_DMAENGINE_PCM
|
||
|
+ help
|
||
|
+ Say Y or M if you want to add support for codecs attached to
|
||
|
+ the BCM2708 I2S interface. You will also need
|
||
|
+ to select the audio interfaces to support below.
|
||
|
diff --git a/sound/soc/bcm/Makefile b/sound/soc/bcm/Makefile
|
||
|
index bc816b7..f8bbe1f 100644
|
||
|
--- a/sound/soc/bcm/Makefile
|
||
|
+++ b/sound/soc/bcm/Makefile
|
||
|
@@ -3,3 +3,7 @@ snd-soc-bcm2835-i2s-objs := bcm2835-i2s.o
|
||
|
|
||
|
obj-$(CONFIG_SND_BCM2835_SOC_I2S) += snd-soc-bcm2835-i2s.o
|
||
|
|
||
|
+# BCM2708 Platform Support
|
||
|
+snd-soc-bcm2708-i2s-objs := bcm2708-i2s.o
|
||
|
+
|
||
|
+obj-$(CONFIG_SND_BCM2708_SOC_I2S) += snd-soc-bcm2708-i2s.o
|
||
|
diff --git a/sound/soc/bcm/bcm2708-i2s.c b/sound/soc/bcm/bcm2708-i2s.c
|
||
|
new file mode 100644
|
||
|
index 0000000..0b5322a
|
||
|
--- /dev/null
|
||
|
+++ b/sound/soc/bcm/bcm2708-i2s.c
|
||
|
@@ -0,0 +1,998 @@
|
||
|
+/*
|
||
|
+ * ALSA SoC I2S Audio Layer for Broadcom BCM2708 SoC
|
||
|
+ *
|
||
|
+ * Author: Florian Meier <florian.meier@koalo.de>
|
||
|
+ * Copyright 2013
|
||
|
+ *
|
||
|
+ * Based on
|
||
|
+ * Raspberry Pi PCM I2S ALSA Driver
|
||
|
+ * Copyright (c) by Phil Poole 2013
|
||
|
+ *
|
||
|
+ * ALSA SoC I2S (McBSP) Audio Layer for TI DAVINCI processor
|
||
|
+ * Vladimir Barinov, <vbarinov@embeddedalley.com>
|
||
|
+ * Copyright (C) 2007 MontaVista Software, Inc., <source@mvista.com>
|
||
|
+ *
|
||
|
+ * OMAP ALSA SoC DAI driver using McBSP port
|
||
|
+ * Copyright (C) 2008 Nokia Corporation
|
||
|
+ * Contact: Jarkko Nikula <jarkko.nikula@bitmer.com>
|
||
|
+ * Peter Ujfalusi <peter.ujfalusi@ti.com>
|
||
|
+ *
|
||
|
+ * Freescale SSI ALSA SoC Digital Audio Interface (DAI) driver
|
||
|
+ * Author: Timur Tabi <timur@freescale.com>
|
||
|
+ * Copyright 2007-2010 Freescale Semiconductor, Inc.
|
||
|
+ *
|
||
|
+ * This program is free software; you can redistribute it and/or
|
||
|
+ * modify it under the terms of the GNU General Public License
|
||
|
+ * version 2 as published by the Free Software Foundation.
|
||
|
+ *
|
||
|
+ * This program is distributed in the hope that it will be useful, but
|
||
|
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
|
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||
|
+ * General Public License for more details.
|
||
|
+ */
|
||
|
+
|
||
|
+#include "bcm2708-i2s.h"
|
||
|
+
|
||
|
+#include <linux/init.h>
|
||
|
+#include <linux/module.h>
|
||
|
+#include <linux/device.h>
|
||
|
+#include <linux/slab.h>
|
||
|
+#include <linux/delay.h>
|
||
|
+#include <linux/io.h>
|
||
|
+#include <linux/clk.h>
|
||
|
+#include <mach/gpio.h>
|
||
|
+
|
||
|
+#include <sound/core.h>
|
||
|
+#include <sound/pcm.h>
|
||
|
+#include <sound/pcm_params.h>
|
||
|
+#include <sound/initval.h>
|
||
|
+#include <sound/soc.h>
|
||
|
+#include <sound/dmaengine_pcm.h>
|
||
|
+
|
||
|
+#include <asm/system_info.h>
|
||
|
+
|
||
|
+/* Clock registers */
|
||
|
+#define BCM2708_CLK_PCMCTL_REG 0x00
|
||
|
+#define BCM2708_CLK_PCMDIV_REG 0x04
|
||
|
+
|
||
|
+/* Clock register settings */
|
||
|
+#define BCM2708_CLK_PASSWD (0x5a000000)
|
||
|
+#define BCM2708_CLK_PASSWD_MASK (0xff000000)
|
||
|
+#define BCM2708_CLK_MASH(v) ((v) << 9)
|
||
|
+#define BCM2708_CLK_FLIP BIT(8)
|
||
|
+#define BCM2708_CLK_BUSY BIT(7)
|
||
|
+#define BCM2708_CLK_KILL BIT(5)
|
||
|
+#define BCM2708_CLK_ENAB BIT(4)
|
||
|
+#define BCM2708_CLK_SRC(v) (v)
|
||
|
+
|
||
|
+#define BCM2708_CLK_SHIFT (12)
|
||
|
+#define BCM2708_CLK_DIVI(v) ((v) << BCM2708_CLK_SHIFT)
|
||
|
+#define BCM2708_CLK_DIVF(v) (v)
|
||
|
+#define BCM2708_CLK_DIVF_MASK (0xFFF)
|
||
|
+
|
||
|
+enum {
|
||
|
+ BCM2708_CLK_MASH_0 = 0,
|
||
|
+ BCM2708_CLK_MASH_1,
|
||
|
+ BCM2708_CLK_MASH_2,
|
||
|
+ BCM2708_CLK_MASH_3,
|
||
|
+};
|
||
|
+
|
||
|
+enum {
|
||
|
+ BCM2708_CLK_SRC_GND = 0,
|
||
|
+ BCM2708_CLK_SRC_OSC,
|
||
|
+ BCM2708_CLK_SRC_DBG0,
|
||
|
+ BCM2708_CLK_SRC_DBG1,
|
||
|
+ BCM2708_CLK_SRC_PLLA,
|
||
|
+ BCM2708_CLK_SRC_PLLC,
|
||
|
+ BCM2708_CLK_SRC_PLLD,
|
||
|
+ BCM2708_CLK_SRC_HDMI,
|
||
|
+};
|
||
|
+
|
||
|
+/* Most clocks are not useable (freq = 0) */
|
||
|
+static const unsigned int bcm2708_clk_freq[BCM2708_CLK_SRC_HDMI+1] = {
|
||
|
+ [BCM2708_CLK_SRC_GND] = 0,
|
||
|
+ [BCM2708_CLK_SRC_OSC] = 19200000,
|
||
|
+ [BCM2708_CLK_SRC_DBG0] = 0,
|
||
|
+ [BCM2708_CLK_SRC_DBG1] = 0,
|
||
|
+ [BCM2708_CLK_SRC_PLLA] = 0,
|
||
|
+ [BCM2708_CLK_SRC_PLLC] = 0,
|
||
|
+ [BCM2708_CLK_SRC_PLLD] = 500000000,
|
||
|
+ [BCM2708_CLK_SRC_HDMI] = 0,
|
||
|
+};
|
||
|
+
|
||
|
+/* I2S registers */
|
||
|
+#define BCM2708_I2S_CS_A_REG 0x00
|
||
|
+#define BCM2708_I2S_FIFO_A_REG 0x04
|
||
|
+#define BCM2708_I2S_MODE_A_REG 0x08
|
||
|
+#define BCM2708_I2S_RXC_A_REG 0x0c
|
||
|
+#define BCM2708_I2S_TXC_A_REG 0x10
|
||
|
+#define BCM2708_I2S_DREQ_A_REG 0x14
|
||
|
+#define BCM2708_I2S_INTEN_A_REG 0x18
|
||
|
+#define BCM2708_I2S_INTSTC_A_REG 0x1c
|
||
|
+#define BCM2708_I2S_GRAY_REG 0x20
|
||
|
+
|
||
|
+/* I2S register settings */
|
||
|
+#define BCM2708_I2S_STBY BIT(25)
|
||
|
+#define BCM2708_I2S_SYNC BIT(24)
|
||
|
+#define BCM2708_I2S_RXSEX BIT(23)
|
||
|
+#define BCM2708_I2S_RXF BIT(22)
|
||
|
+#define BCM2708_I2S_TXE BIT(21)
|
||
|
+#define BCM2708_I2S_RXD BIT(20)
|
||
|
+#define BCM2708_I2S_TXD BIT(19)
|
||
|
+#define BCM2708_I2S_RXR BIT(18)
|
||
|
+#define BCM2708_I2S_TXW BIT(17)
|
||
|
+#define BCM2708_I2S_CS_RXERR BIT(16)
|
||
|
+#define BCM2708_I2S_CS_TXERR BIT(15)
|
||
|
+#define BCM2708_I2S_RXSYNC BIT(14)
|
||
|
+#define BCM2708_I2S_TXSYNC BIT(13)
|
||
|
+#define BCM2708_I2S_DMAEN BIT(9)
|
||
|
+#define BCM2708_I2S_RXTHR(v) ((v) << 7)
|
||
|
+#define BCM2708_I2S_TXTHR(v) ((v) << 5)
|
||
|
+#define BCM2708_I2S_RXCLR BIT(4)
|
||
|
+#define BCM2708_I2S_TXCLR BIT(3)
|
||
|
+#define BCM2708_I2S_TXON BIT(2)
|
||
|
+#define BCM2708_I2S_RXON BIT(1)
|
||
|
+#define BCM2708_I2S_EN (1)
|
||
|
+
|
||
|
+#define BCM2708_I2S_CLKDIS BIT(28)
|
||
|
+#define BCM2708_I2S_PDMN BIT(27)
|
||
|
+#define BCM2708_I2S_PDME BIT(26)
|
||
|
+#define BCM2708_I2S_FRXP BIT(25)
|
||
|
+#define BCM2708_I2S_FTXP BIT(24)
|
||
|
+#define BCM2708_I2S_CLKM BIT(23)
|
||
|
+#define BCM2708_I2S_CLKI BIT(22)
|
||
|
+#define BCM2708_I2S_FSM BIT(21)
|
||
|
+#define BCM2708_I2S_FSI BIT(20)
|
||
|
+#define BCM2708_I2S_FLEN(v) ((v) << 10)
|
||
|
+#define BCM2708_I2S_FSLEN(v) (v)
|
||
|
+
|
||
|
+#define BCM2708_I2S_CHWEX BIT(15)
|
||
|
+#define BCM2708_I2S_CHEN BIT(14)
|
||
|
+#define BCM2708_I2S_CHPOS(v) ((v) << 4)
|
||
|
+#define BCM2708_I2S_CHWID(v) (v)
|
||
|
+#define BCM2708_I2S_CH1(v) ((v) << 16)
|
||
|
+#define BCM2708_I2S_CH2(v) (v)
|
||
|
+
|
||
|
+#define BCM2708_I2S_TX_PANIC(v) ((v) << 24)
|
||
|
+#define BCM2708_I2S_RX_PANIC(v) ((v) << 16)
|
||
|
+#define BCM2708_I2S_TX(v) ((v) << 8)
|
||
|
+#define BCM2708_I2S_RX(v) (v)
|
||
|
+
|
||
|
+#define BCM2708_I2S_INT_RXERR BIT(3)
|
||
|
+#define BCM2708_I2S_INT_TXERR BIT(2)
|
||
|
+#define BCM2708_I2S_INT_RXR BIT(1)
|
||
|
+#define BCM2708_I2S_INT_TXW BIT(0)
|
||
|
+
|
||
|
+/* I2S DMA interface */
|
||
|
+#define BCM2708_I2S_FIFO_PHYSICAL_ADDR 0x7E203004
|
||
|
+#define BCM2708_DMA_DREQ_PCM_TX 2
|
||
|
+#define BCM2708_DMA_DREQ_PCM_RX 3
|
||
|
+
|
||
|
+/* I2S pin configuration */
|
||
|
+static int bcm2708_i2s_gpio=BCM2708_I2S_GPIO_AUTO;
|
||
|
+
|
||
|
+/* General device struct */
|
||
|
+struct bcm2708_i2s_dev {
|
||
|
+ struct device *dev;
|
||
|
+ struct snd_dmaengine_dai_dma_data dma_data[2];
|
||
|
+ unsigned int fmt;
|
||
|
+ unsigned int bclk_ratio;
|
||
|
+
|
||
|
+ struct regmap *i2s_regmap;
|
||
|
+ struct regmap *clk_regmap;
|
||
|
+};
|
||
|
+
|
||
|
+void bcm2708_i2s_set_gpio(int gpio) {
|
||
|
+ bcm2708_i2s_gpio=gpio;
|
||
|
+}
|
||
|
+EXPORT_SYMBOL(bcm2708_i2s_set_gpio);
|
||
|
+
|
||
|
+
|
||
|
+static void bcm2708_i2s_start_clock(struct bcm2708_i2s_dev *dev)
|
||
|
+{
|
||
|
+ /* Start the clock if in master mode */
|
||
|
+ unsigned int master = dev->fmt & SND_SOC_DAIFMT_MASTER_MASK;
|
||
|
+
|
||
|
+ switch (master) {
|
||
|
+ case SND_SOC_DAIFMT_CBS_CFS:
|
||
|
+ case SND_SOC_DAIFMT_CBS_CFM:
|
||
|
+ regmap_update_bits(dev->clk_regmap, BCM2708_CLK_PCMCTL_REG,
|
||
|
+ BCM2708_CLK_PASSWD_MASK | BCM2708_CLK_ENAB,
|
||
|
+ BCM2708_CLK_PASSWD | BCM2708_CLK_ENAB);
|
||
|
+ break;
|
||
|
+ default:
|
||
|
+ break;
|
||
|
+ }
|
||
|
+}
|
||
|
+
|
||
|
+static void bcm2708_i2s_stop_clock(struct bcm2708_i2s_dev *dev)
|
||
|
+{
|
||
|
+ uint32_t clkreg;
|
||
|
+ int timeout = 1000;
|
||
|
+
|
||
|
+ /* Stop clock */
|
||
|
+ regmap_update_bits(dev->clk_regmap, BCM2708_CLK_PCMCTL_REG,
|
||
|
+ BCM2708_CLK_PASSWD_MASK | BCM2708_CLK_ENAB,
|
||
|
+ BCM2708_CLK_PASSWD);
|
||
|
+
|
||
|
+ /* Wait for the BUSY flag going down */
|
||
|
+ while (--timeout) {
|
||
|
+ regmap_read(dev->clk_regmap, BCM2708_CLK_PCMCTL_REG, &clkreg);
|
||
|
+ if (!(clkreg & BCM2708_CLK_BUSY))
|
||
|
+ break;
|
||
|
+ }
|
||
|
+
|
||
|
+ if (!timeout) {
|
||
|
+ /* KILL the clock */
|
||
|
+ dev_err(dev->dev, "I2S clock didn't stop. Kill the clock!\n");
|
||
|
+ regmap_update_bits(dev->clk_regmap, BCM2708_CLK_PCMCTL_REG,
|
||
|
+ BCM2708_CLK_KILL | BCM2708_CLK_PASSWD_MASK,
|
||
|
+ BCM2708_CLK_KILL | BCM2708_CLK_PASSWD);
|
||
|
+ }
|
||
|
+}
|
||
|
+
|
||
|
+static void bcm2708_i2s_clear_fifos(struct bcm2708_i2s_dev *dev,
|
||
|
+ bool tx, bool rx)
|
||
|
+{
|
||
|
+ int timeout = 1000;
|
||
|
+ uint32_t syncval;
|
||
|
+ uint32_t csreg;
|
||
|
+ uint32_t i2s_active_state;
|
||
|
+ uint32_t clkreg;
|
||
|
+ uint32_t clk_active_state;
|
||
|
+ uint32_t off;
|
||
|
+ uint32_t clr;
|
||
|
+
|
||
|
+ off = tx ? BCM2708_I2S_TXON : 0;
|
||
|
+ off |= rx ? BCM2708_I2S_RXON : 0;
|
||
|
+
|
||
|
+ clr = tx ? BCM2708_I2S_TXCLR : 0;
|
||
|
+ clr |= rx ? BCM2708_I2S_RXCLR : 0;
|
||
|
+
|
||
|
+ /* Backup the current state */
|
||
|
+ regmap_read(dev->i2s_regmap, BCM2708_I2S_CS_A_REG, &csreg);
|
||
|
+ i2s_active_state = csreg & (BCM2708_I2S_RXON | BCM2708_I2S_TXON);
|
||
|
+
|
||
|
+ regmap_read(dev->clk_regmap, BCM2708_CLK_PCMCTL_REG, &clkreg);
|
||
|
+ clk_active_state = clkreg & BCM2708_CLK_ENAB;
|
||
|
+
|
||
|
+ /* Start clock if not running */
|
||
|
+ if (!clk_active_state) {
|
||
|
+ regmap_update_bits(dev->clk_regmap, BCM2708_CLK_PCMCTL_REG,
|
||
|
+ BCM2708_CLK_PASSWD_MASK | BCM2708_CLK_ENAB,
|
||
|
+ BCM2708_CLK_PASSWD | BCM2708_CLK_ENAB);
|
||
|
+ }
|
||
|
+
|
||
|
+ /* Stop I2S module */
|
||
|
+ regmap_update_bits(dev->i2s_regmap, BCM2708_I2S_CS_A_REG, off, 0);
|
||
|
+
|
||
|
+ /*
|
||
|
+ * Clear the FIFOs
|
||
|
+ * Requires at least 2 PCM clock cycles to take effect
|
||
|
+ */
|
||
|
+ regmap_update_bits(dev->i2s_regmap, BCM2708_I2S_CS_A_REG, clr, clr);
|
||
|
+
|
||
|
+ /* Wait for 2 PCM clock cycles */
|
||
|
+
|
||
|
+ /*
|
||
|
+ * Toggle the SYNC flag. After 2 PCM clock cycles it can be read back
|
||
|
+ * FIXME: This does not seem to work for slave mode!
|
||
|
+ */
|
||
|
+ regmap_read(dev->i2s_regmap, BCM2708_I2S_CS_A_REG, &syncval);
|
||
|
+ syncval &= BCM2708_I2S_SYNC;
|
||
|
+
|
||
|
+ regmap_update_bits(dev->i2s_regmap, BCM2708_I2S_CS_A_REG,
|
||
|
+ BCM2708_I2S_SYNC, ~syncval);
|
||
|
+
|
||
|
+ /* Wait for the SYNC flag changing it's state */
|
||
|
+ while (--timeout) {
|
||
|
+ regmap_read(dev->i2s_regmap, BCM2708_I2S_CS_A_REG, &csreg);
|
||
|
+ if ((csreg & BCM2708_I2S_SYNC) != syncval)
|
||
|
+ break;
|
||
|
+ }
|
||
|
+
|
||
|
+ if (!timeout)
|
||
|
+ dev_err(dev->dev, "I2S SYNC error!\n");
|
||
|
+
|
||
|
+ /* Stop clock if it was not running before */
|
||
|
+ if (!clk_active_state)
|
||
|
+ bcm2708_i2s_stop_clock(dev);
|
||
|
+
|
||
|
+ /* Restore I2S state */
|
||
|
+ regmap_update_bits(dev->i2s_regmap, BCM2708_I2S_CS_A_REG,
|
||
|
+ BCM2708_I2S_RXON | BCM2708_I2S_TXON, i2s_active_state);
|
||
|
+}
|
||
|
+
|
||
|
+static int bcm2708_i2s_set_dai_fmt(struct snd_soc_dai *dai,
|
||
|
+ unsigned int fmt)
|
||
|
+{
|
||
|
+ struct bcm2708_i2s_dev *dev = snd_soc_dai_get_drvdata(dai);
|
||
|
+ dev->fmt = fmt;
|
||
|
+ return 0;
|
||
|
+}
|
||
|
+
|
||
|
+static int bcm2708_i2s_set_dai_bclk_ratio(struct snd_soc_dai *dai,
|
||
|
+ unsigned int ratio)
|
||
|
+{
|
||
|
+ struct bcm2708_i2s_dev *dev = snd_soc_dai_get_drvdata(dai);
|
||
|
+ dev->bclk_ratio = ratio;
|
||
|
+ return 0;
|
||
|
+}
|
||
|
+
|
||
|
+
|
||
|
+static int bcm2708_i2s_set_function(unsigned offset, int function)
|
||
|
+{
|
||
|
+ #define GPIOFSEL(x) (0x00+(x)*4)
|
||
|
+ void __iomem *gpio = __io_address(GPIO_BASE);
|
||
|
+ unsigned alt = function <= 3 ? function + 4: function == 4 ? 3 : 2;
|
||
|
+ unsigned gpiodir;
|
||
|
+ unsigned gpio_bank = offset / 10;
|
||
|
+ unsigned gpio_field_offset = (offset - 10 * gpio_bank) * 3;
|
||
|
+
|
||
|
+ if (offset >= BCM2708_NR_GPIOS)
|
||
|
+ return -EINVAL;
|
||
|
+
|
||
|
+ gpiodir = readl(gpio + GPIOFSEL(gpio_bank));
|
||
|
+ gpiodir &= ~(7 << gpio_field_offset);
|
||
|
+ gpiodir |= alt << gpio_field_offset;
|
||
|
+ writel(gpiodir, gpio + GPIOFSEL(gpio_bank));
|
||
|
+ return 0;
|
||
|
+}
|
||
|
+
|
||
|
+static void bcm2708_i2s_setup_gpio(void)
|
||
|
+{
|
||
|
+ /*
|
||
|
+ * This is the common way to handle the GPIO pins for
|
||
|
+ * the Raspberry Pi.
|
||
|
+ * TODO Better way would be to handle
|
||
|
+ * this in the device tree!
|
||
|
+ */
|
||
|
+ int pin,pinconfig,startpin,alt;
|
||
|
+
|
||
|
+ /* SPI is on different GPIOs on different boards */
|
||
|
+ /* for Raspberry Pi B+, this is pin GPIO18-21, for original on 28-31 */
|
||
|
+ if (bcm2708_i2s_gpio==BCM2708_I2S_GPIO_AUTO) {
|
||
|
+ if ((system_rev & 0xffffff) >= 0x10) {
|
||
|
+ /* Model B+ */
|
||
|
+ pinconfig=BCM2708_I2S_GPIO_PIN18;
|
||
|
+ } else {
|
||
|
+ /* original */
|
||
|
+ pinconfig=BCM2708_I2S_GPIO_PIN28;
|
||
|
+ }
|
||
|
+ } else {
|
||
|
+ pinconfig=bcm2708_i2s_gpio;
|
||
|
+ }
|
||
|
+
|
||
|
+ if (pinconfig==BCM2708_I2S_GPIO_PIN18) {
|
||
|
+ startpin=18;
|
||
|
+ alt=BCM2708_I2S_GPIO_PIN18_ALT;
|
||
|
+ } else if (pinconfig==BCM2708_I2S_GPIO_PIN28) {
|
||
|
+ startpin=28;
|
||
|
+ alt=BCM2708_I2S_GPIO_PIN28_ALT;
|
||
|
+ } else {
|
||
|
+ printk(KERN_INFO "Can't configure I2S GPIOs, unknown pin mode for I2S: %i\n",pinconfig);
|
||
|
+ return;
|
||
|
+ }
|
||
|
+
|
||
|
+ /* configure I2S pins to correct ALT mode */
|
||
|
+ for (pin = startpin; pin <= startpin+3; pin++) {
|
||
|
+ bcm2708_i2s_set_function(pin, alt);
|
||
|
+ }
|
||
|
+}
|
||
|
+
|
||
|
+static int bcm2708_i2s_hw_params(struct snd_pcm_substream *substream,
|
||
|
+ struct snd_pcm_hw_params *params,
|
||
|
+ struct snd_soc_dai *dai)
|
||
|
+{
|
||
|
+ struct bcm2708_i2s_dev *dev = snd_soc_dai_get_drvdata(dai);
|
||
|
+
|
||
|
+ unsigned int sampling_rate = params_rate(params);
|
||
|
+ unsigned int data_length, data_delay, bclk_ratio;
|
||
|
+ unsigned int ch1pos, ch2pos, mode, format;
|
||
|
+ unsigned int mash = BCM2708_CLK_MASH_1;
|
||
|
+ unsigned int divi, divf, target_frequency;
|
||
|
+ int clk_src = -1;
|
||
|
+ unsigned int master = dev->fmt & SND_SOC_DAIFMT_MASTER_MASK;
|
||
|
+ bool bit_master = (master == SND_SOC_DAIFMT_CBS_CFS
|
||
|
+ || master == SND_SOC_DAIFMT_CBS_CFM);
|
||
|
+
|
||
|
+ bool frame_master = (master == SND_SOC_DAIFMT_CBS_CFS
|
||
|
+ || master == SND_SOC_DAIFMT_CBM_CFS);
|
||
|
+ uint32_t csreg;
|
||
|
+
|
||
|
+ /*
|
||
|
+ * If a stream is already enabled,
|
||
|
+ * the registers are already set properly.
|
||
|
+ */
|
||
|
+ regmap_read(dev->i2s_regmap, BCM2708_I2S_CS_A_REG, &csreg);
|
||
|
+
|
||
|
+ if (csreg & (BCM2708_I2S_TXON | BCM2708_I2S_RXON))
|
||
|
+ return 0;
|
||
|
+
|
||
|
+
|
||
|
+ bcm2708_i2s_setup_gpio();
|
||
|
+
|
||
|
+ /*
|
||
|
+ * Adjust the data length according to the format.
|
||
|
+ * We prefill the half frame length with an integer
|
||
|
+ * divider of 2400 as explained at the clock settings.
|
||
|
+ * Maybe it is overwritten there, if the Integer mode
|
||
|
+ * does not apply.
|
||
|
+ */
|
||
|
+ switch (params_format(params)) {
|
||
|
+ case SNDRV_PCM_FORMAT_S16_LE:
|
||
|
+ data_length = 16;
|
||
|
+ bclk_ratio = 50;
|
||
|
+ break;
|
||
|
+ case SNDRV_PCM_FORMAT_S24_LE:
|
||
|
+ data_length = 24;
|
||
|
+ bclk_ratio = 50;
|
||
|
+ break;
|
||
|
+ case SNDRV_PCM_FORMAT_S32_LE:
|
||
|
+ data_length = 32;
|
||
|
+ bclk_ratio = 100;
|
||
|
+ break;
|
||
|
+ default:
|
||
|
+ return -EINVAL;
|
||
|
+ }
|
||
|
+
|
||
|
+ /* If bclk_ratio already set, use that one. */
|
||
|
+ if (dev->bclk_ratio)
|
||
|
+ bclk_ratio = dev->bclk_ratio;
|
||
|
+
|
||
|
+ /*
|
||
|
+ * Clock Settings
|
||
|
+ *
|
||
|
+ * The target frequency of the bit clock is
|
||
|
+ * sampling rate * frame length
|
||
|
+ *
|
||
|
+ * Integer mode:
|
||
|
+ * Sampling rates that are multiples of 8000 kHz
|
||
|
+ * can be driven by the oscillator of 19.2 MHz
|
||
|
+ * with an integer divider as long as the frame length
|
||
|
+ * is an integer divider of 19200000/8000=2400 as set up above.
|
||
|
+ * This is no longer possible if the sampling rate
|
||
|
+ * is too high (e.g. 192 kHz), because the oscillator is too slow.
|
||
|
+ *
|
||
|
+ * MASH mode:
|
||
|
+ * For all other sampling rates, it is not possible to
|
||
|
+ * have an integer divider. Approximate the clock
|
||
|
+ * with the MASH module that induces a slight frequency
|
||
|
+ * variance. To minimize that it is best to have the fastest
|
||
|
+ * clock here. That is PLLD with 500 MHz.
|
||
|
+ */
|
||
|
+ target_frequency = sampling_rate * bclk_ratio;
|
||
|
+ clk_src = BCM2708_CLK_SRC_OSC;
|
||
|
+ mash = BCM2708_CLK_MASH_0;
|
||
|
+
|
||
|
+ if (bcm2708_clk_freq[clk_src] % target_frequency == 0
|
||
|
+ && bit_master && frame_master) {
|
||
|
+ divi = bcm2708_clk_freq[clk_src] / target_frequency;
|
||
|
+ divf = 0;
|
||
|
+ } else {
|
||
|
+ uint64_t dividend;
|
||
|
+
|
||
|
+ if (!dev->bclk_ratio) {
|
||
|
+ /*
|
||
|
+ * Overwrite bclk_ratio, because the
|
||
|
+ * above trick is not needed or can
|
||
|
+ * not be used.
|
||
|
+ */
|
||
|
+ bclk_ratio = 2 * data_length;
|
||
|
+ }
|
||
|
+
|
||
|
+ target_frequency = sampling_rate * bclk_ratio;
|
||
|
+
|
||
|
+ clk_src = BCM2708_CLK_SRC_PLLD;
|
||
|
+ mash = BCM2708_CLK_MASH_1;
|
||
|
+
|
||
|
+ dividend = bcm2708_clk_freq[clk_src];
|
||
|
+ dividend <<= BCM2708_CLK_SHIFT;
|
||
|
+ do_div(dividend, target_frequency);
|
||
|
+ divi = dividend >> BCM2708_CLK_SHIFT;
|
||
|
+ divf = dividend & BCM2708_CLK_DIVF_MASK;
|
||
|
+ }
|
||
|
+
|
||
|
+ /* Set clock divider */
|
||
|
+ regmap_write(dev->clk_regmap, BCM2708_CLK_PCMDIV_REG, BCM2708_CLK_PASSWD
|
||
|
+ | BCM2708_CLK_DIVI(divi)
|
||
|
+ | BCM2708_CLK_DIVF(divf));
|
||
|
+
|
||
|
+ /* Setup clock, but don't start it yet */
|
||
|
+ regmap_write(dev->clk_regmap, BCM2708_CLK_PCMCTL_REG, BCM2708_CLK_PASSWD
|
||
|
+ | BCM2708_CLK_MASH(mash)
|
||
|
+ | BCM2708_CLK_SRC(clk_src));
|
||
|
+
|
||
|
+ /* Setup the frame format */
|
||
|
+ format = BCM2708_I2S_CHEN;
|
||
|
+
|
||
|
+ if (data_length >= 24)
|
||
|
+ format |= BCM2708_I2S_CHWEX;
|
||
|
+
|
||
|
+ format |= BCM2708_I2S_CHWID((data_length-8)&0xf);
|
||
|
+
|
||
|
+ switch (dev->fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
|
||
|
+ case SND_SOC_DAIFMT_I2S:
|
||
|
+ data_delay = 1;
|
||
|
+ break;
|
||
|
+ default:
|
||
|
+ /*
|
||
|
+ * TODO
|
||
|
+ * Others are possible but are not implemented at the moment.
|
||
|
+ */
|
||
|
+ dev_err(dev->dev, "%s:bad format\n", __func__);
|
||
|
+ return -EINVAL;
|
||
|
+ }
|
||
|
+
|
||
|
+ ch1pos = data_delay;
|
||
|
+ ch2pos = bclk_ratio / 2 + data_delay;
|
||
|
+
|
||
|
+ switch (params_channels(params)) {
|
||
|
+ case 2:
|
||
|
+ format = BCM2708_I2S_CH1(format) | BCM2708_I2S_CH2(format);
|
||
|
+ format |= BCM2708_I2S_CH1(BCM2708_I2S_CHPOS(ch1pos));
|
||
|
+ format |= BCM2708_I2S_CH2(BCM2708_I2S_CHPOS(ch2pos));
|
||
|
+ break;
|
||
|
+ default:
|
||
|
+ return -EINVAL;
|
||
|
+ }
|
||
|
+
|
||
|
+ /*
|
||
|
+ * Set format for both streams.
|
||
|
+ * We cannot set another frame length
|
||
|
+ * (and therefore word length) anyway,
|
||
|
+ * so the format will be the same.
|
||
|
+ */
|
||
|
+ regmap_write(dev->i2s_regmap, BCM2708_I2S_RXC_A_REG, format);
|
||
|
+ regmap_write(dev->i2s_regmap, BCM2708_I2S_TXC_A_REG, format);
|
||
|
+
|
||
|
+ /* Setup the I2S mode */
|
||
|
+ mode = 0;
|
||
|
+
|
||
|
+ if (data_length <= 16) {
|
||
|
+ /*
|
||
|
+ * Use frame packed mode (2 channels per 32 bit word)
|
||
|
+ * We cannot set another frame length in the second stream
|
||
|
+ * (and therefore word length) anyway,
|
||
|
+ * so the format will be the same.
|
||
|
+ */
|
||
|
+ mode |= BCM2708_I2S_FTXP | BCM2708_I2S_FRXP;
|
||
|
+ }
|
||
|
+
|
||
|
+ mode |= BCM2708_I2S_FLEN(bclk_ratio - 1);
|
||
|
+ mode |= BCM2708_I2S_FSLEN(bclk_ratio / 2);
|
||
|
+
|
||
|
+ /* Master or slave? */
|
||
|
+ switch (dev->fmt & SND_SOC_DAIFMT_MASTER_MASK) {
|
||
|
+ case SND_SOC_DAIFMT_CBS_CFS:
|
||
|
+ /* CPU is master */
|
||
|
+ break;
|
||
|
+ case SND_SOC_DAIFMT_CBM_CFS:
|
||
|
+ /*
|
||
|
+ * CODEC is bit clock master
|
||
|
+ * CPU is frame master
|
||
|
+ */
|
||
|
+ mode |= BCM2708_I2S_CLKM;
|
||
|
+ break;
|
||
|
+ case SND_SOC_DAIFMT_CBS_CFM:
|
||
|
+ /*
|
||
|
+ * CODEC is frame master
|
||
|
+ * CPU is bit clock master
|
||
|
+ */
|
||
|
+ mode |= BCM2708_I2S_FSM;
|
||
|
+ break;
|
||
|
+ case SND_SOC_DAIFMT_CBM_CFM:
|
||
|
+ /* CODEC is master */
|
||
|
+ mode |= BCM2708_I2S_CLKM;
|
||
|
+ mode |= BCM2708_I2S_FSM;
|
||
|
+ break;
|
||
|
+ default:
|
||
|
+ dev_err(dev->dev, "%s:bad master\n", __func__);
|
||
|
+ return -EINVAL;
|
||
|
+ }
|
||
|
+
|
||
|
+ /*
|
||
|
+ * Invert clocks?
|
||
|
+ *
|
||
|
+ * The BCM approach seems to be inverted to the classical I2S approach.
|
||
|
+ */
|
||
|
+ switch (dev->fmt & SND_SOC_DAIFMT_INV_MASK) {
|
||
|
+ case SND_SOC_DAIFMT_NB_NF:
|
||
|
+ /* None. Therefore, both for BCM */
|
||
|
+ mode |= BCM2708_I2S_CLKI;
|
||
|
+ mode |= BCM2708_I2S_FSI;
|
||
|
+ break;
|
||
|
+ case SND_SOC_DAIFMT_IB_IF:
|
||
|
+ /* Both. Therefore, none for BCM */
|
||
|
+ break;
|
||
|
+ case SND_SOC_DAIFMT_NB_IF:
|
||
|
+ /*
|
||
|
+ * Invert only frame sync. Therefore,
|
||
|
+ * invert only bit clock for BCM
|
||
|
+ */
|
||
|
+ mode |= BCM2708_I2S_CLKI;
|
||
|
+ break;
|
||
|
+ case SND_SOC_DAIFMT_IB_NF:
|
||
|
+ /*
|
||
|
+ * Invert only bit clock. Therefore,
|
||
|
+ * invert only frame sync for BCM
|
||
|
+ */
|
||
|
+ mode |= BCM2708_I2S_FSI;
|
||
|
+ break;
|
||
|
+ default:
|
||
|
+ return -EINVAL;
|
||
|
+ }
|
||
|
+
|
||
|
+ regmap_write(dev->i2s_regmap, BCM2708_I2S_MODE_A_REG, mode);
|
||
|
+
|
||
|
+ /* Setup the DMA parameters */
|
||
|
+ regmap_update_bits(dev->i2s_regmap, BCM2708_I2S_CS_A_REG,
|
||
|
+ BCM2708_I2S_RXTHR(1)
|
||
|
+ | BCM2708_I2S_TXTHR(1)
|
||
|
+ | BCM2708_I2S_DMAEN, 0xffffffff);
|
||
|
+
|
||
|
+ regmap_update_bits(dev->i2s_regmap, BCM2708_I2S_DREQ_A_REG,
|
||
|
+ BCM2708_I2S_TX_PANIC(0x10)
|
||
|
+ | BCM2708_I2S_RX_PANIC(0x30)
|
||
|
+ | BCM2708_I2S_TX(0x30)
|
||
|
+ | BCM2708_I2S_RX(0x20), 0xffffffff);
|
||
|
+
|
||
|
+ /* Clear FIFOs */
|
||
|
+ bcm2708_i2s_clear_fifos(dev, true, true);
|
||
|
+
|
||
|
+ return 0;
|
||
|
+}
|
||
|
+
|
||
|
+static int bcm2708_i2s_prepare(struct snd_pcm_substream *substream,
|
||
|
+ struct snd_soc_dai *dai)
|
||
|
+{
|
||
|
+ struct bcm2708_i2s_dev *dev = snd_soc_dai_get_drvdata(dai);
|
||
|
+ uint32_t cs_reg;
|
||
|
+
|
||
|
+ bcm2708_i2s_start_clock(dev);
|
||
|
+
|
||
|
+ /*
|
||
|
+ * Clear both FIFOs if the one that should be started
|
||
|
+ * is not empty at the moment. This should only happen
|
||
|
+ * after overrun. Otherwise, hw_params would have cleared
|
||
|
+ * the FIFO.
|
||
|
+ */
|
||
|
+ regmap_read(dev->i2s_regmap, BCM2708_I2S_CS_A_REG, &cs_reg);
|
||
|
+
|
||
|
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK
|
||
|
+ && !(cs_reg & BCM2708_I2S_TXE))
|
||
|
+ bcm2708_i2s_clear_fifos(dev, true, false);
|
||
|
+ else if (substream->stream == SNDRV_PCM_STREAM_CAPTURE
|
||
|
+ && (cs_reg & BCM2708_I2S_RXD))
|
||
|
+ bcm2708_i2s_clear_fifos(dev, false, true);
|
||
|
+
|
||
|
+ return 0;
|
||
|
+}
|
||
|
+
|
||
|
+static void bcm2708_i2s_stop(struct bcm2708_i2s_dev *dev,
|
||
|
+ struct snd_pcm_substream *substream,
|
||
|
+ struct snd_soc_dai *dai)
|
||
|
+{
|
||
|
+ uint32_t mask;
|
||
|
+
|
||
|
+ if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
|
||
|
+ mask = BCM2708_I2S_RXON;
|
||
|
+ else
|
||
|
+ mask = BCM2708_I2S_TXON;
|
||
|
+
|
||
|
+ regmap_update_bits(dev->i2s_regmap,
|
||
|
+ BCM2708_I2S_CS_A_REG, mask, 0);
|
||
|
+
|
||
|
+ /* Stop also the clock when not SND_SOC_DAIFMT_CONT */
|
||
|
+ if (!dai->active && !(dev->fmt & SND_SOC_DAIFMT_CONT))
|
||
|
+ bcm2708_i2s_stop_clock(dev);
|
||
|
+}
|
||
|
+
|
||
|
+static int bcm2708_i2s_trigger(struct snd_pcm_substream *substream, int cmd,
|
||
|
+ struct snd_soc_dai *dai)
|
||
|
+{
|
||
|
+ struct bcm2708_i2s_dev *dev = snd_soc_dai_get_drvdata(dai);
|
||
|
+ uint32_t mask;
|
||
|
+
|
||
|
+ switch (cmd) {
|
||
|
+ case SNDRV_PCM_TRIGGER_START:
|
||
|
+ case SNDRV_PCM_TRIGGER_RESUME:
|
||
|
+ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
|
||
|
+ bcm2708_i2s_start_clock(dev);
|
||
|
+
|
||
|
+ if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
|
||
|
+ mask = BCM2708_I2S_RXON;
|
||
|
+ else
|
||
|
+ mask = BCM2708_I2S_TXON;
|
||
|
+
|
||
|
+ regmap_update_bits(dev->i2s_regmap,
|
||
|
+ BCM2708_I2S_CS_A_REG, mask, mask);
|
||
|
+ break;
|
||
|
+
|
||
|
+ case SNDRV_PCM_TRIGGER_STOP:
|
||
|
+ case SNDRV_PCM_TRIGGER_SUSPEND:
|
||
|
+ case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
|
||
|
+ bcm2708_i2s_stop(dev, substream, dai);
|
||
|
+ break;
|
||
|
+ default:
|
||
|
+ return -EINVAL;
|
||
|
+ }
|
||
|
+
|
||
|
+ return 0;
|
||
|
+}
|
||
|
+
|
||
|
+static int bcm2708_i2s_startup(struct snd_pcm_substream *substream,
|
||
|
+ struct snd_soc_dai *dai)
|
||
|
+{
|
||
|
+ struct bcm2708_i2s_dev *dev = snd_soc_dai_get_drvdata(dai);
|
||
|
+
|
||
|
+ if (dai->active)
|
||
|
+ return 0;
|
||
|
+
|
||
|
+ /* Should this still be running stop it */
|
||
|
+ bcm2708_i2s_stop_clock(dev);
|
||
|
+
|
||
|
+ /* Enable PCM block */
|
||
|
+ regmap_update_bits(dev->i2s_regmap, BCM2708_I2S_CS_A_REG,
|
||
|
+ BCM2708_I2S_EN, BCM2708_I2S_EN);
|
||
|
+
|
||
|
+ /*
|
||
|
+ * Disable STBY.
|
||
|
+ * Requires at least 4 PCM clock cycles to take effect.
|
||
|
+ */
|
||
|
+ regmap_update_bits(dev->i2s_regmap, BCM2708_I2S_CS_A_REG,
|
||
|
+ BCM2708_I2S_STBY, BCM2708_I2S_STBY);
|
||
|
+
|
||
|
+ return 0;
|
||
|
+}
|
||
|
+
|
||
|
+static void bcm2708_i2s_shutdown(struct snd_pcm_substream *substream,
|
||
|
+ struct snd_soc_dai *dai)
|
||
|
+{
|
||
|
+ struct bcm2708_i2s_dev *dev = snd_soc_dai_get_drvdata(dai);
|
||
|
+
|
||
|
+ bcm2708_i2s_stop(dev, substream, dai);
|
||
|
+
|
||
|
+ /* If both streams are stopped, disable module and clock */
|
||
|
+ if (dai->active)
|
||
|
+ return;
|
||
|
+
|
||
|
+ /* Disable the module */
|
||
|
+ regmap_update_bits(dev->i2s_regmap, BCM2708_I2S_CS_A_REG,
|
||
|
+ BCM2708_I2S_EN, 0);
|
||
|
+
|
||
|
+ /*
|
||
|
+ * Stopping clock is necessary, because stop does
|
||
|
+ * not stop the clock when SND_SOC_DAIFMT_CONT
|
||
|
+ */
|
||
|
+ bcm2708_i2s_stop_clock(dev);
|
||
|
+}
|
||
|
+
|
||
|
+static const struct snd_soc_dai_ops bcm2708_i2s_dai_ops = {
|
||
|
+ .startup = bcm2708_i2s_startup,
|
||
|
+ .shutdown = bcm2708_i2s_shutdown,
|
||
|
+ .prepare = bcm2708_i2s_prepare,
|
||
|
+ .trigger = bcm2708_i2s_trigger,
|
||
|
+ .hw_params = bcm2708_i2s_hw_params,
|
||
|
+ .set_fmt = bcm2708_i2s_set_dai_fmt,
|
||
|
+ .set_bclk_ratio = bcm2708_i2s_set_dai_bclk_ratio
|
||
|
+};
|
||
|
+
|
||
|
+static int bcm2708_i2s_dai_probe(struct snd_soc_dai *dai)
|
||
|
+{
|
||
|
+ struct bcm2708_i2s_dev *dev = snd_soc_dai_get_drvdata(dai);
|
||
|
+
|
||
|
+ dai->playback_dma_data = &dev->dma_data[SNDRV_PCM_STREAM_PLAYBACK];
|
||
|
+ dai->capture_dma_data = &dev->dma_data[SNDRV_PCM_STREAM_CAPTURE];
|
||
|
+
|
||
|
+ return 0;
|
||
|
+}
|
||
|
+
|
||
|
+static struct snd_soc_dai_driver bcm2708_i2s_dai = {
|
||
|
+ .name = "bcm2708-i2s",
|
||
|
+ .probe = bcm2708_i2s_dai_probe,
|
||
|
+ .playback = {
|
||
|
+ .channels_min = 2,
|
||
|
+ .channels_max = 2,
|
||
|
+ .rates = SNDRV_PCM_RATE_8000_192000,
|
||
|
+ .formats = SNDRV_PCM_FMTBIT_S16_LE
|
||
|
+ | SNDRV_PCM_FMTBIT_S24_LE
|
||
|
+ | SNDRV_PCM_FMTBIT_S32_LE
|
||
|
+ },
|
||
|
+ .capture = {
|
||
|
+ .channels_min = 2,
|
||
|
+ .channels_max = 2,
|
||
|
+ .rates = SNDRV_PCM_RATE_8000_192000,
|
||
|
+ .formats = SNDRV_PCM_FMTBIT_S16_LE
|
||
|
+ | SNDRV_PCM_FMTBIT_S24_LE
|
||
|
+ | SNDRV_PCM_FMTBIT_S32_LE
|
||
|
+ },
|
||
|
+ .ops = &bcm2708_i2s_dai_ops,
|
||
|
+ .symmetric_rates = 1
|
||
|
+};
|
||
|
+
|
||
|
+static bool bcm2708_i2s_volatile_reg(struct device *dev, unsigned int reg)
|
||
|
+{
|
||
|
+ switch (reg) {
|
||
|
+ case BCM2708_I2S_CS_A_REG:
|
||
|
+ case BCM2708_I2S_FIFO_A_REG:
|
||
|
+ case BCM2708_I2S_INTSTC_A_REG:
|
||
|
+ case BCM2708_I2S_GRAY_REG:
|
||
|
+ return true;
|
||
|
+ default:
|
||
|
+ return false;
|
||
|
+ };
|
||
|
+}
|
||
|
+
|
||
|
+static bool bcm2708_i2s_precious_reg(struct device *dev, unsigned int reg)
|
||
|
+{
|
||
|
+ switch (reg) {
|
||
|
+ case BCM2708_I2S_FIFO_A_REG:
|
||
|
+ return true;
|
||
|
+ default:
|
||
|
+ return false;
|
||
|
+ };
|
||
|
+}
|
||
|
+
|
||
|
+static bool bcm2708_clk_volatile_reg(struct device *dev, unsigned int reg)
|
||
|
+{
|
||
|
+ switch (reg) {
|
||
|
+ case BCM2708_CLK_PCMCTL_REG:
|
||
|
+ return true;
|
||
|
+ default:
|
||
|
+ return false;
|
||
|
+ };
|
||
|
+}
|
||
|
+
|
||
|
+static const struct regmap_config bcm2708_regmap_config[] = {
|
||
|
+ {
|
||
|
+ .reg_bits = 32,
|
||
|
+ .reg_stride = 4,
|
||
|
+ .val_bits = 32,
|
||
|
+ .max_register = BCM2708_I2S_GRAY_REG,
|
||
|
+ .precious_reg = bcm2708_i2s_precious_reg,
|
||
|
+ .volatile_reg = bcm2708_i2s_volatile_reg,
|
||
|
+ .cache_type = REGCACHE_RBTREE,
|
||
|
+ .name = "i2s",
|
||
|
+ },
|
||
|
+ {
|
||
|
+ .reg_bits = 32,
|
||
|
+ .reg_stride = 4,
|
||
|
+ .val_bits = 32,
|
||
|
+ .max_register = BCM2708_CLK_PCMDIV_REG,
|
||
|
+ .volatile_reg = bcm2708_clk_volatile_reg,
|
||
|
+ .cache_type = REGCACHE_RBTREE,
|
||
|
+ .name = "clk",
|
||
|
+ },
|
||
|
+};
|
||
|
+
|
||
|
+static const struct snd_soc_component_driver bcm2708_i2s_component = {
|
||
|
+ .name = "bcm2708-i2s-comp",
|
||
|
+};
|
||
|
+
|
||
|
+static const struct snd_pcm_hardware bcm2708_pcm_hardware = {
|
||
|
+ .info = SNDRV_PCM_INFO_INTERLEAVED |
|
||
|
+ SNDRV_PCM_INFO_JOINT_DUPLEX,
|
||
|
+ .formats = SNDRV_PCM_FMTBIT_S16_LE |
|
||
|
+ SNDRV_PCM_FMTBIT_S24_LE |
|
||
|
+ SNDRV_PCM_FMTBIT_S32_LE,
|
||
|
+ .period_bytes_min = 32,
|
||
|
+ .period_bytes_max = 64 * PAGE_SIZE,
|
||
|
+ .periods_min = 2,
|
||
|
+ .periods_max = 255,
|
||
|
+ .buffer_bytes_max = 128 * PAGE_SIZE,
|
||
|
+};
|
||
|
+
|
||
|
+static const struct snd_dmaengine_pcm_config bcm2708_dmaengine_pcm_config = {
|
||
|
+ .prepare_slave_config = snd_dmaengine_pcm_prepare_slave_config,
|
||
|
+ .pcm_hardware = &bcm2708_pcm_hardware,
|
||
|
+ .prealloc_buffer_size = 256 * PAGE_SIZE,
|
||
|
+};
|
||
|
+
|
||
|
+
|
||
|
+static int bcm2708_i2s_probe(struct platform_device *pdev)
|
||
|
+{
|
||
|
+ struct bcm2708_i2s_dev *dev;
|
||
|
+ int i;
|
||
|
+ int ret;
|
||
|
+ struct regmap *regmap[2];
|
||
|
+ struct resource *mem[2];
|
||
|
+
|
||
|
+ /* Request both ioareas */
|
||
|
+ for (i = 0; i <= 1; i++) {
|
||
|
+ void __iomem *base;
|
||
|
+
|
||
|
+ mem[i] = platform_get_resource(pdev, IORESOURCE_MEM, i);
|
||
|
+ base = devm_ioremap_resource(&pdev->dev, mem[i]);
|
||
|
+ if (IS_ERR(base))
|
||
|
+ return PTR_ERR(base);
|
||
|
+
|
||
|
+ regmap[i] = devm_regmap_init_mmio(&pdev->dev, base,
|
||
|
+ &bcm2708_regmap_config[i]);
|
||
|
+ if (IS_ERR(regmap[i])) {
|
||
|
+ dev_err(&pdev->dev, "I2S probe: regmap init failed\n");
|
||
|
+ return PTR_ERR(regmap[i]);
|
||
|
+ }
|
||
|
+ }
|
||
|
+
|
||
|
+ dev = devm_kzalloc(&pdev->dev, sizeof(*dev),
|
||
|
+ GFP_KERNEL);
|
||
|
+ if (IS_ERR(dev))
|
||
|
+ return PTR_ERR(dev);
|
||
|
+
|
||
|
+ dev->i2s_regmap = regmap[0];
|
||
|
+ dev->clk_regmap = regmap[1];
|
||
|
+
|
||
|
+ /* Set the DMA address */
|
||
|
+ dev->dma_data[SNDRV_PCM_STREAM_PLAYBACK].addr =
|
||
|
+ (dma_addr_t)BCM2708_I2S_FIFO_PHYSICAL_ADDR;
|
||
|
+
|
||
|
+ dev->dma_data[SNDRV_PCM_STREAM_CAPTURE].addr =
|
||
|
+ (dma_addr_t)BCM2708_I2S_FIFO_PHYSICAL_ADDR;
|
||
|
+
|
||
|
+ /* Set the DREQ */
|
||
|
+ dev->dma_data[SNDRV_PCM_STREAM_PLAYBACK].slave_id =
|
||
|
+ BCM2708_DMA_DREQ_PCM_TX;
|
||
|
+ dev->dma_data[SNDRV_PCM_STREAM_CAPTURE].slave_id =
|
||
|
+ BCM2708_DMA_DREQ_PCM_RX;
|
||
|
+
|
||
|
+ /* Set the bus width */
|
||
|
+ dev->dma_data[SNDRV_PCM_STREAM_PLAYBACK].addr_width =
|
||
|
+ DMA_SLAVE_BUSWIDTH_4_BYTES;
|
||
|
+ dev->dma_data[SNDRV_PCM_STREAM_CAPTURE].addr_width =
|
||
|
+ DMA_SLAVE_BUSWIDTH_4_BYTES;
|
||
|
+
|
||
|
+ /* Set burst */
|
||
|
+ dev->dma_data[SNDRV_PCM_STREAM_PLAYBACK].maxburst = 2;
|
||
|
+ dev->dma_data[SNDRV_PCM_STREAM_CAPTURE].maxburst = 2;
|
||
|
+
|
||
|
+ /* BCLK ratio - use default */
|
||
|
+ dev->bclk_ratio = 0;
|
||
|
+
|
||
|
+ /* Store the pdev */
|
||
|
+ dev->dev = &pdev->dev;
|
||
|
+ dev_set_drvdata(&pdev->dev, dev);
|
||
|
+
|
||
|
+ ret = snd_soc_register_component(&pdev->dev,
|
||
|
+ &bcm2708_i2s_component, &bcm2708_i2s_dai, 1);
|
||
|
+
|
||
|
+ if (ret) {
|
||
|
+ dev_err(&pdev->dev, "Could not register DAI: %d\n", ret);
|
||
|
+ ret = -ENOMEM;
|
||
|
+ return ret;
|
||
|
+ }
|
||
|
+
|
||
|
+ ret = snd_dmaengine_pcm_register(&pdev->dev,
|
||
|
+ &bcm2708_dmaengine_pcm_config,
|
||
|
+ SND_DMAENGINE_PCM_FLAG_COMPAT);
|
||
|
+ if (ret) {
|
||
|
+ dev_err(&pdev->dev, "Could not register PCM: %d\n", ret);
|
||
|
+ snd_soc_unregister_component(&pdev->dev);
|
||
|
+ return ret;
|
||
|
+ }
|
||
|
+
|
||
|
+ return 0;
|
||
|
+}
|
||
|
+
|
||
|
+static int bcm2708_i2s_remove(struct platform_device *pdev)
|
||
|
+{
|
||
|
+ snd_dmaengine_pcm_unregister(&pdev->dev);
|
||
|
+ snd_soc_unregister_component(&pdev->dev);
|
||
|
+ return 0;
|
||
|
+}
|
||
|
+
|
||
|
+static struct platform_driver bcm2708_i2s_driver = {
|
||
|
+ .probe = bcm2708_i2s_probe,
|
||
|
+ .remove = bcm2708_i2s_remove,
|
||
|
+ .driver = {
|
||
|
+ .name = "bcm2708-i2s",
|
||
|
+ .owner = THIS_MODULE,
|
||
|
+ },
|
||
|
+};
|
||
|
+
|
||
|
+module_platform_driver(bcm2708_i2s_driver);
|
||
|
+
|
||
|
+MODULE_ALIAS("platform:bcm2708-i2s");
|
||
|
+MODULE_DESCRIPTION("BCM2708 I2S interface");
|
||
|
+MODULE_AUTHOR("Florian Meier <florian.meier@koalo.de>");
|
||
|
+MODULE_LICENSE("GPL v2");
|
||
|
diff --git a/sound/soc/bcm/bcm2708-i2s.h b/sound/soc/bcm/bcm2708-i2s.h
|
||
|
new file mode 100644
|
||
|
index 0000000..6fdcbc1
|
||
|
--- /dev/null
|
||
|
+++ b/sound/soc/bcm/bcm2708-i2s.h
|
||
|
@@ -0,0 +1,35 @@
|
||
|
+/*
|
||
|
+ * I2S configuration for sound cards.
|
||
|
+ *
|
||
|
+ * Copyright (c) 2014 Daniel Matuschek <daniel@hifiberry.com>
|
||
|
+ *
|
||
|
+ * This program is free software; you can redistribute it and/or modify
|
||
|
+ * it under the terms of the GNU General Public License as published by
|
||
|
+ * the Free Software Foundation; either version 2 of the License, or
|
||
|
+ * (at your option) any later version.
|
||
|
+ *
|
||
|
+ * This program is distributed in the hope that it will be useful,
|
||
|
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
|
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||
|
+ * GNU General Public License for more details.
|
||
|
+ *
|
||
|
+ * You should have received a copy of the GNU General Public License
|
||
|
+ * along with this program; if not, write to the Free Software
|
||
|
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||
|
+ */
|
||
|
+
|
||
|
+#ifndef BCM2708_I2S_H
|
||
|
+#define BCM2708_I2S_H
|
||
|
+
|
||
|
+/* I2S pin assignment */
|
||
|
+#define BCM2708_I2S_GPIO_AUTO 0
|
||
|
+#define BCM2708_I2S_GPIO_PIN18 1
|
||
|
+#define BCM2708_I2S_GPIO_PIN28 2
|
||
|
+
|
||
|
+/* Alt mode to enable I2S */
|
||
|
+#define BCM2708_I2S_GPIO_PIN18_ALT 0
|
||
|
+#define BCM2708_I2S_GPIO_PIN28_ALT 2
|
||
|
+
|
||
|
+extern void bcm2708_i2s_set_gpio(int gpio);
|
||
|
+
|
||
|
+#endif
|
||
|
--
|
||
|
1.8.3.2
|
||
|
|