2013-11-04 18:37:08 +00:00
|
|
|
# CONFIG_ATH79_DEV_DSA is not set
|
2017-01-27 15:42:37 +00:00
|
|
|
# CONFIG_ATH79_MACH_ALFA_AP120C is not set
|
2013-11-04 18:37:08 +00:00
|
|
|
# CONFIG_ATH79_MACH_ALFA_AP96 is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_ALFA_NX is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_ALL0258N is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_ALL0315N is not set
|
2017-01-27 15:42:37 +00:00
|
|
|
# CONFIG_ATH79_MACH_ANTMINER_S1 is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_ANTMINER_S3 is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_ANTROUTER_R1 is not set
|
2013-11-04 18:37:08 +00:00
|
|
|
# CONFIG_ATH79_MACH_AP121 is not set
|
2017-03-31 11:37:31 +00:00
|
|
|
# CONFIG_ATH79_MACH_AP121F is not set
|
2013-11-04 18:37:08 +00:00
|
|
|
# CONFIG_ATH79_MACH_AP132 is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_AP136 is not set
|
2017-01-27 15:42:37 +00:00
|
|
|
# CONFIG_ATH79_MACH_AP143 is not set
|
2015-07-24 09:09:42 +00:00
|
|
|
# CONFIG_ATH79_MACH_AP147 is not set
|
2017-01-27 15:42:37 +00:00
|
|
|
# CONFIG_ATH79_MACH_AP152 is not set
|
2017-03-02 17:23:50 +00:00
|
|
|
# CONFIG_ATH79_MACH_AP531B0 is not set
|
2017-01-27 15:42:37 +00:00
|
|
|
# CONFIG_ATH79_MACH_AP90Q is not set
|
2013-11-04 18:37:08 +00:00
|
|
|
# CONFIG_ATH79_MACH_AP96 is not set
|
2017-04-22 16:21:47 +00:00
|
|
|
# CONFIG_ATH79_MACH_ARCHER_C25_V1 is not set
|
2017-06-16 13:26:30 +00:00
|
|
|
# CONFIG_ATH79_MACH_ARCHER_C58_V1 is not set
|
2016-12-27 21:41:41 +00:00
|
|
|
# CONFIG_ATH79_MACH_ARCHER_C59_V1 is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_ARCHER_C60_V1 is not set
|
2013-11-04 18:37:08 +00:00
|
|
|
# CONFIG_ATH79_MACH_ARCHER_C7 is not set
|
2017-01-27 15:42:37 +00:00
|
|
|
# CONFIG_ATH79_MACH_ARDUINO_YUN is not set
|
2013-11-04 18:37:08 +00:00
|
|
|
# CONFIG_ATH79_MACH_AW_NR580 is not set
|
2017-01-27 15:42:37 +00:00
|
|
|
# CONFIG_ATH79_MACH_BHR_4GRV2 is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_BHU_BXU2000N2_A is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_BSB is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_C55 is not set
|
2017-07-03 17:51:13 +00:00
|
|
|
CONFIG_ATH79_MACH_C60=y
|
2015-12-19 11:27:19 +00:00
|
|
|
# CONFIG_ATH79_MACH_CAP324 is not set
|
2013-11-04 18:37:08 +00:00
|
|
|
# CONFIG_ATH79_MACH_CAP4200AG is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_CARAMBOLA2 is not set
|
2017-01-27 15:42:37 +00:00
|
|
|
# CONFIG_ATH79_MACH_CF_E316N_V2 is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_CF_E320N_V2 is not set
|
2017-06-29 10:03:03 +00:00
|
|
|
# CONFIG_ATH79_MACH_CF_E355AC is not set
|
2017-01-27 15:42:37 +00:00
|
|
|
# CONFIG_ATH79_MACH_CF_E380AC_V1 is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_CF_E380AC_V2 is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_CF_E520N is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_CF_E530N is not set
|
ar71xx: add support for P&W R602N and CPE505N
P&W (full name: Shenzhen Progress&Win Technologies) R602N (could be also
labeled as R602F, R602, etc.) is a simple N300 router with 5-port
10/100 Mbps switch, non-detachable antennas and USB.
CPE505 is an outdoor CPE with PoE support and detachable antennas.
Both devices are based on Qualcomm/Atheros QCA9531 v2.
Common specification:
- 650/597/216 MHz (CPU/DDR/AHB)
- 64 MB of RAM (DDR2)
- 16 MB of FLASH
- UART (J2) header on PCB
R602N specification:
- 5x 10/100 Mbps Ethernet
- 1x USB 2.0
- 2T2R 2.4 GHz with external LNA and PA (SE2576L), up to 28 dBm
- 2x external, non-detachable antennas
- 7x LED, 1x button
CPE505N specification:
- 2x 10/100 Mbps Ethernet (both ports support passive PoE 12-24 V)
- 2T2R 2.4 GHz with external LNA and PA (SKY65174-21), up to 30 dBm
- 2x external, detachable antennas (RP-SMA connectors)
- 1x RGB LED, 2x LEDs (in RJ45 sockets), 1x button
Flash instructions:
It seems that there are many different versions of the firmware which
these devices are shipped with. The generic/standard one is based on
some modified OpenWrt and LEDE firmware can be flashed directly from
vendor's webgui or with sysupgrade (root password is "admin123").
Before flashing, make sure (use "fw_printenv") that the kernel load
address in your device is set to "0x9f050000" (bootcmd variable is
"bootm 0x9f050000"). If your device uses different load address, you
should first change it, under vendor's firmware, with command:
fw_setenv bootcmd "bootm 0x9f050000 || bootm OLD_ADDRESS"
Where OLD_ADDRESS is previous kernel load address (in CPE505 version
I got access to, it was "0x9fe80000"). This will allow you to use
both the vendor's and LEDE firmware.
If version of your device contains empty U-Boot environment (you will
get information about this after issuing "fw_printenv"), you should
use U-Boot, serial line access and TFTP to perform firmware upgrade:
1. tftp 0x80060000 lede-ar71xx-generic-...-squashfs-sysupgrade.bin
2. erase 0x9f050000 +$filesize
3. cp.b $fileaddr 0x9f050000 $filesize
4. setenv bootcmd "bootm 0x9f050000 || bootm OLD_ADDRESS"
5. saveenv && reset
These devices contain also web recovery mode inside U-Boot. It can be
started with pressing the reset button for around 3 seconds just after
the device powerup. Web recovery panel is available on "192.168.10.9"
and to be able to use it, IP on your PC must be set to "192.168.10.10".
Make sure to change kernel load address before using recovery mode or
the U-Boot will not be able to load LEDE firmware.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2017-03-15 23:54:08 +00:00
|
|
|
# CONFIG_ATH79_MACH_CPE505N is not set
|
2017-01-27 15:42:37 +00:00
|
|
|
# CONFIG_ATH79_MACH_CPE510 is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_CPE830 is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_CPE870 is not set
|
2015-12-19 11:27:25 +00:00
|
|
|
# CONFIG_ATH79_MACH_CR3000 is not set
|
2015-12-19 11:27:32 +00:00
|
|
|
# CONFIG_ATH79_MACH_CR5000 is not set
|
2017-01-27 15:42:37 +00:00
|
|
|
# CONFIG_ATH79_MACH_DAP_2695_A1 is not set
|
2013-11-04 18:37:08 +00:00
|
|
|
# CONFIG_ATH79_MACH_DB120 is not set
|
2017-01-27 15:42:37 +00:00
|
|
|
# CONFIG_ATH79_MACH_DGL_5500_A1 is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_DHP_1565_A1 is not set
|
2013-11-04 18:37:08 +00:00
|
|
|
# CONFIG_ATH79_MACH_DIR_505_A1 is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_DIR_600_A1 is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_DIR_615_C1 is not set
|
2017-01-27 15:42:37 +00:00
|
|
|
# CONFIG_ATH79_MACH_DIR_615_I1 is not set
|
2013-11-04 18:37:08 +00:00
|
|
|
# CONFIG_ATH79_MACH_DIR_825_B1 is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_DIR_825_C1 is not set
|
2016-10-11 18:32:26 +00:00
|
|
|
# CONFIG_ATH79_MACH_DIR_869_A1 is not set
|
2017-01-27 15:42:37 +00:00
|
|
|
# CONFIG_ATH79_MACH_DLAN_HOTSPOT is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_DLAN_PRO_1200_AC is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_DLAN_PRO_500_WP is not set
|
2017-07-03 17:51:13 +00:00
|
|
|
CONFIG_ATH79_MACH_DOMYWIFI_DW33D=y
|
2017-01-27 15:42:37 +00:00
|
|
|
# CONFIG_ATH79_MACH_DR344 is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_DR531 is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_DRAGINO2 is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_E2100L is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_EAP120 is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_EAP300V2 is not set
|
2013-11-04 18:37:08 +00:00
|
|
|
# CONFIG_ATH79_MACH_EAP7660D is not set
|
2017-01-27 15:42:37 +00:00
|
|
|
# CONFIG_ATH79_MACH_EL_M150 is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_EL_MINI is not set
|
2017-05-31 00:39:58 +00:00
|
|
|
# CONFIG_ATH79_MACH_ENS202EXT is not set
|
2017-01-27 15:42:37 +00:00
|
|
|
# CONFIG_ATH79_MACH_EPG5000 is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_ESR1750 is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_ESR900 is not set
|
2013-11-04 18:37:08 +00:00
|
|
|
# CONFIG_ATH79_MACH_EW_DORIN is not set
|
2017-01-27 15:42:37 +00:00
|
|
|
# CONFIG_ATH79_MACH_F9K1115V2 is not set
|
2016-12-30 10:53:21 +00:00
|
|
|
# CONFIG_ATH79_MACH_FRITZ300E is not set
|
2017-01-27 15:42:37 +00:00
|
|
|
# CONFIG_ATH79_MACH_GL_AR150 is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_GL_AR300 is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_GL_AR300M is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_GL_DOMINO is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_GL_INET is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_GL_MIFI is not set
|
2017-08-19 16:26:46 +00:00
|
|
|
# CONFIG_ATH79_MACH_GL_USB150 is not set
|
2017-01-27 15:42:37 +00:00
|
|
|
# CONFIG_ATH79_MACH_GS_MINIBOX_V1 is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_GS_OOLITE is not set
|
2017-04-27 03:09:27 +00:00
|
|
|
CONFIG_ATH79_MACH_HIVEAP_121=y
|
2017-01-27 15:42:37 +00:00
|
|
|
# CONFIG_ATH79_MACH_HIWIFI_HC6361 is not set
|
2013-11-04 18:37:08 +00:00
|
|
|
# CONFIG_ATH79_MACH_HORNET_UB is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_JA76PF is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_JWAP003 is not set
|
2017-01-27 15:42:37 +00:00
|
|
|
# CONFIG_ATH79_MACH_JWAP230 is not set
|
2017-02-12 17:34:36 +00:00
|
|
|
# CONFIG_ATH79_MACH_LIMA is not set
|
2017-01-27 15:42:37 +00:00
|
|
|
# CONFIG_ATH79_MACH_MC_MAC1200R is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_MR12 is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_MR16 is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_MR1750 is not set
|
2017-07-03 17:51:13 +00:00
|
|
|
CONFIG_ATH79_MACH_MR18=y
|
2013-11-04 18:37:08 +00:00
|
|
|
# CONFIG_ATH79_MACH_MR600 is not set
|
2017-01-27 15:42:37 +00:00
|
|
|
# CONFIG_ATH79_MACH_MR900 is not set
|
2013-11-04 18:37:08 +00:00
|
|
|
# CONFIG_ATH79_MACH_MYNET_N600 is not set
|
2017-01-27 15:42:37 +00:00
|
|
|
# CONFIG_ATH79_MACH_MYNET_N750 is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_MYNET_REXT is not set
|
2013-11-04 18:37:08 +00:00
|
|
|
# CONFIG_ATH79_MACH_MZK_W04NU is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_MZK_W300NH is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_NBG460N is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_OM2P is not set
|
2017-01-27 15:42:37 +00:00
|
|
|
# CONFIG_ATH79_MACH_OM5P is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_OM5P_AC is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_OM5P_ACv2 is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_OMY_G1 is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_OMY_X1 is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_ONION_OMEGA is not set
|
2013-11-04 18:37:08 +00:00
|
|
|
# CONFIG_ATH79_MACH_PB42 is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_PB44 is not set
|
2017-01-27 15:42:37 +00:00
|
|
|
# CONFIG_ATH79_MACH_PQI_AIR_PEN is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_QIHOO_C301 is not set
|
ar71xx: add support for P&W R602N and CPE505N
P&W (full name: Shenzhen Progress&Win Technologies) R602N (could be also
labeled as R602F, R602, etc.) is a simple N300 router with 5-port
10/100 Mbps switch, non-detachable antennas and USB.
CPE505 is an outdoor CPE with PoE support and detachable antennas.
Both devices are based on Qualcomm/Atheros QCA9531 v2.
Common specification:
- 650/597/216 MHz (CPU/DDR/AHB)
- 64 MB of RAM (DDR2)
- 16 MB of FLASH
- UART (J2) header on PCB
R602N specification:
- 5x 10/100 Mbps Ethernet
- 1x USB 2.0
- 2T2R 2.4 GHz with external LNA and PA (SE2576L), up to 28 dBm
- 2x external, non-detachable antennas
- 7x LED, 1x button
CPE505N specification:
- 2x 10/100 Mbps Ethernet (both ports support passive PoE 12-24 V)
- 2T2R 2.4 GHz with external LNA and PA (SKY65174-21), up to 30 dBm
- 2x external, detachable antennas (RP-SMA connectors)
- 1x RGB LED, 2x LEDs (in RJ45 sockets), 1x button
Flash instructions:
It seems that there are many different versions of the firmware which
these devices are shipped with. The generic/standard one is based on
some modified OpenWrt and LEDE firmware can be flashed directly from
vendor's webgui or with sysupgrade (root password is "admin123").
Before flashing, make sure (use "fw_printenv") that the kernel load
address in your device is set to "0x9f050000" (bootcmd variable is
"bootm 0x9f050000"). If your device uses different load address, you
should first change it, under vendor's firmware, with command:
fw_setenv bootcmd "bootm 0x9f050000 || bootm OLD_ADDRESS"
Where OLD_ADDRESS is previous kernel load address (in CPE505 version
I got access to, it was "0x9fe80000"). This will allow you to use
both the vendor's and LEDE firmware.
If version of your device contains empty U-Boot environment (you will
get information about this after issuing "fw_printenv"), you should
use U-Boot, serial line access and TFTP to perform firmware upgrade:
1. tftp 0x80060000 lede-ar71xx-generic-...-squashfs-sysupgrade.bin
2. erase 0x9f050000 +$filesize
3. cp.b $fileaddr 0x9f050000 $filesize
4. setenv bootcmd "bootm 0x9f050000 || bootm OLD_ADDRESS"
5. saveenv && reset
These devices contain also web recovery mode inside U-Boot. It can be
started with pressing the reset button for around 3 seconds just after
the device powerup. Web recovery panel is available on "192.168.10.9"
and to be able to use it, IP on your PC must be set to "192.168.10.10".
Make sure to change kernel load address before using recovery mode or
the U-Boot will not be able to load LEDE firmware.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2017-03-15 23:54:08 +00:00
|
|
|
# CONFIG_ATH79_MACH_R602N is not set
|
2017-07-03 17:51:13 +00:00
|
|
|
CONFIG_ATH79_MACH_R6100=y
|
2017-05-08 10:28:38 +00:00
|
|
|
CONFIG_ATH79_MACH_RAMBUTAN=y
|
2016-01-07 00:40:48 +00:00
|
|
|
# CONFIG_ATH79_MACH_RE450 is not set
|
2013-11-04 18:37:08 +00:00
|
|
|
# CONFIG_ATH79_MACH_RW2458N is not set
|
2017-01-27 15:42:37 +00:00
|
|
|
# CONFIG_ATH79_MACH_SC1750 is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_SC300M is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_SC450 is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_SMART_300 is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_SOM9331 is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_SR3200 is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_TELLSTICK_ZNET_LITE is not set
|
2013-11-04 18:37:08 +00:00
|
|
|
# CONFIG_ATH79_MACH_TEW_632BRP is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_TEW_673GRU is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_TEW_712BR is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_TEW_732BR is not set
|
2017-01-27 15:42:37 +00:00
|
|
|
# CONFIG_ATH79_MACH_TEW_823DRU is not set
|
2013-11-04 18:37:08 +00:00
|
|
|
# CONFIG_ATH79_MACH_TL_MR11U is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_TL_MR13U is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_TL_MR3020 is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_TL_MR3X20 is not set
|
2017-05-25 19:51:37 +00:00
|
|
|
# CONFIG_ATH79_MACH_TL_MR6400 is not set
|
2017-01-27 15:42:37 +00:00
|
|
|
# CONFIG_ATH79_MACH_TL_WA701ND_V2 is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_TL_WA7210N_V2 is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_TL_WA801ND_V3 is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_TL_WA830RE_V2 is not set
|
2017-02-10 12:44:06 +00:00
|
|
|
# CONFIG_ATH79_MACH_TL_WA850RE_V2 is not set
|
2017-06-09 15:11:39 +00:00
|
|
|
# CONFIG_ATH79_MACH_TL_WA855RE_V1 is not set
|
2013-11-04 18:37:08 +00:00
|
|
|
# CONFIG_ATH79_MACH_TL_WA901ND is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_TL_WA901ND_V2 is not set
|
2017-01-27 15:42:37 +00:00
|
|
|
# CONFIG_ATH79_MACH_TL_WA901ND_V4 is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_TL_WAX50RE is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_TL_WDR3320_V2 is not set
|
2013-11-04 18:37:08 +00:00
|
|
|
# CONFIG_ATH79_MACH_TL_WDR3500 is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_TL_WDR4300 is not set
|
2017-01-27 15:42:37 +00:00
|
|
|
# CONFIG_ATH79_MACH_TL_WDR6500_V2 is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_TL_WPA8630 is not set
|
2013-11-04 18:37:08 +00:00
|
|
|
# CONFIG_ATH79_MACH_TL_WR1041N_V2 is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_TL_WR1043ND is not set
|
2017-01-27 15:42:37 +00:00
|
|
|
# CONFIG_ATH79_MACH_TL_WR1043ND_V2 is not set
|
2016-12-16 11:50:34 +00:00
|
|
|
# CONFIG_ATH79_MACH_TL_WR1043ND_V4 is not set
|
2013-11-04 18:37:08 +00:00
|
|
|
# CONFIG_ATH79_MACH_TL_WR2543N is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_TL_WR703N is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_TL_WR720N_V3 is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_TL_WR741ND is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_TL_WR741ND_V4 is not set
|
2017-01-27 15:42:37 +00:00
|
|
|
# CONFIG_ATH79_MACH_TL_WR802N_V1 is not set
|
2017-07-03 17:51:13 +00:00
|
|
|
# CONFIG_ATH79_MACH_TL_WR802N_V2 is not set
|
2017-01-27 15:42:37 +00:00
|
|
|
# CONFIG_ATH79_MACH_TL_WR810N is not set
|
2017-03-16 00:43:43 +00:00
|
|
|
# CONFIG_ATH79_MACH_TL_WR840N_V2 is not set
|
2013-11-04 18:37:08 +00:00
|
|
|
# CONFIG_ATH79_MACH_TL_WR841N_V1 is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_TL_WR841N_V8 is not set
|
2017-01-27 15:42:37 +00:00
|
|
|
# CONFIG_ATH79_MACH_TL_WR841N_V9 is not set
|
ar71xx: add support for TP-Link TL-WR902AC v1
TP-Link TL-WR902AC v1 is a pocket-size, dual-band (AC750), successor of
TL-MR3020 (both devices use very similar enclosure, in same size). New
device is based on Qualcomm QCA9531 v2 + QCA9887. FCC ID: TE7WR902AC.
Specification:
- 650/391/216 MHz (CPU/DDR/AHB)
- 1x 10/100 Mbps Ethernet
- 1x USB 2.0 (GPIO-controlled power)
- 64 MB of RAM (DDR2)
- 8 MB of FLASH
- 2T2R 2.4 GHz (QCA9531)
- 1T1R 5 GHz (QCA9887)
- 5x LED (GPIO-controlled), 2x button, 1x 3-pos switch
- UART pads on PCB (TP1 -> TX, TP2 -> RX, TP3 -> GND, TP4 -> 3V3, jumper
resitors are missing on TX/RX lines)
- 1x micro USB (for power only)
Flash instructions:
Use "factory" image under vendor GUI.
Recovery instructions:
This device contains tftp recovery mode inside U-Boot. You can use it to
flash LEDE (use "factory" image) or vendor firmware.
1. Configure PC with static IP 192.168.0.66/24 and tftp server.
2. Rename "lede-ar71xx-generic-tl-wr902ac-v1-squashfs-factory.bin"
to "wr902acv1_un_tp_recovery.bin" and place it in tftp server dir.
3. Connect PC with LAN port, press the reset button, power up the router
and keep button pressed until WPS LED lights up.
4. Router will download file from server, write it to flash and reboot.
Root access over serial line in vendor firmware: root/sohoadmin.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2017-07-02 16:32:38 +00:00
|
|
|
# CONFIG_ATH79_MACH_TL_WR902AC_V1 is not set
|
2016-12-12 14:59:03 +00:00
|
|
|
# CONFIG_ATH79_MACH_TL_WR940N_V4 is not set
|
2017-01-27 15:42:37 +00:00
|
|
|
# CONFIG_ATH79_MACH_TL_WR941ND is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_TL_WR941ND_V6 is not set
|
2017-03-08 20:10:05 +00:00
|
|
|
# CONFIG_ATH79_MACH_TL_WR942N_V1 is not set
|
2017-01-27 15:42:37 +00:00
|
|
|
# CONFIG_ATH79_MACH_TUBE2H is not set
|
2013-11-04 18:37:08 +00:00
|
|
|
# CONFIG_ATH79_MACH_UBNT is not set
|
2016-02-12 08:31:32 +00:00
|
|
|
# CONFIG_ATH79_MACH_UBNT_UNIFIAC is not set
|
2016-02-12 19:55:07 +00:00
|
|
|
# CONFIG_ATH79_MACH_UBNT_XM is not set
|
2017-01-27 15:42:37 +00:00
|
|
|
# CONFIG_ATH79_MACH_WEIO is not set
|
2013-11-04 18:37:08 +00:00
|
|
|
# CONFIG_ATH79_MACH_WHR_HP_G300N is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_WLAE_AG300N is not set
|
2017-01-27 15:42:37 +00:00
|
|
|
# CONFIG_ATH79_MACH_WLR8100 is not set
|
2013-11-04 18:37:08 +00:00
|
|
|
# CONFIG_ATH79_MACH_WNDAP360 is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_WNDR3700 is not set
|
2017-07-03 17:51:13 +00:00
|
|
|
CONFIG_ATH79_MACH_WNDR4300=y
|
2013-11-04 18:37:08 +00:00
|
|
|
# CONFIG_ATH79_MACH_WNR2000 is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_WNR2000_V3 is not set
|
2017-01-27 15:42:37 +00:00
|
|
|
# CONFIG_ATH79_MACH_WNR2000_V4 is not set
|
2013-11-04 18:37:08 +00:00
|
|
|
# CONFIG_ATH79_MACH_WNR2200 is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_WP543 is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_WPE72 is not set
|
2017-01-27 15:42:37 +00:00
|
|
|
# CONFIG_ATH79_MACH_WPJ342 is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_WPJ344 is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_WPJ531 is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_WPJ558 is not set
|
2017-02-26 11:25:57 +00:00
|
|
|
# CONFIG_ATH79_MACH_WPJ563 is not set
|
2013-11-04 18:37:08 +00:00
|
|
|
# CONFIG_ATH79_MACH_WRT160NL is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_WRT400N is not set
|
2017-01-27 15:42:37 +00:00
|
|
|
# CONFIG_ATH79_MACH_WRTNODE2Q is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_WZR_450HP2 is not set
|
2013-11-04 18:37:08 +00:00
|
|
|
# CONFIG_ATH79_MACH_WZR_HP_AG300H is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_WZR_HP_G300NH is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_WZR_HP_G300NH2 is not set
|
|
|
|
|
# CONFIG_ATH79_MACH_WZR_HP_G450H is not set
|
2017-01-27 15:42:37 +00:00
|
|
|
# CONFIG_ATH79_MACH_XD3200 is not set
|
2017-07-03 17:51:13 +00:00
|
|
|
CONFIG_ATH79_MACH_Z1=y
|
2017-01-27 15:42:37 +00:00
|
|
|
# CONFIG_ATH79_MACH_ZBT_WE1526 is not set
|
2013-11-04 18:37:08 +00:00
|
|
|
# CONFIG_ATH79_MACH_ZCN_1523H is not set
|
2017-07-03 17:51:13 +00:00
|
|
|
CONFIG_BCH=y
|
|
|
|
|
CONFIG_CRC16=y
|
|
|
|
|
CONFIG_CRYPTO_DEFLATE=y
|
|
|
|
|
CONFIG_CRYPTO_LZO=y
|
2017-10-03 16:02:59 +00:00
|
|
|
# CONFIG_INTEL_XWAY_PHY is not set
|
2013-11-04 18:37:08 +00:00
|
|
|
# CONFIG_IP17XX_PHY is not set
|
2017-07-03 17:51:13 +00:00
|
|
|
CONFIG_LEDS_NU801=y
|
|
|
|
|
CONFIG_LZO_COMPRESS=y
|
|
|
|
|
CONFIG_LZO_DECOMPRESS=y
|
2013-11-04 18:37:08 +00:00
|
|
|
# CONFIG_MARVELL_PHY is not set
|
|
|
|
|
# CONFIG_MICREL_PHY is not set
|
|
|
|
|
# CONFIG_MTD_CFI is not set
|
|
|
|
|
CONFIG_MTD_CFI_I2=y
|
|
|
|
|
CONFIG_MTD_MAP_BANK_WIDTH_1=y
|
|
|
|
|
CONFIG_MTD_MAP_BANK_WIDTH_4=y
|
|
|
|
|
# CONFIG_MTD_MYLOADER_PARTS is not set
|
|
|
|
|
CONFIG_MTD_NAND=y
|
|
|
|
|
CONFIG_MTD_NAND_AR934X=y
|
|
|
|
|
CONFIG_MTD_NAND_AR934X_HW_ECC=y
|
2017-07-03 17:51:13 +00:00
|
|
|
CONFIG_MTD_NAND_BCH=y
|
2013-11-04 18:37:08 +00:00
|
|
|
CONFIG_MTD_NAND_ECC=y
|
2015-12-12 06:42:29 +00:00
|
|
|
CONFIG_MTD_NAND_ECC_BCH=y
|
2013-11-04 18:37:08 +00:00
|
|
|
# CONFIG_MTD_REDBOOT_PARTS is not set
|
2016-12-30 10:53:21 +00:00
|
|
|
# CONFIG_MTD_SPLIT_EVA_FW is not set
|
2013-11-04 18:37:08 +00:00
|
|
|
# CONFIG_MTD_SPLIT_SEAMA_FW is not set
|
2017-07-03 16:57:36 +00:00
|
|
|
# CONFIG_MTD_SPLIT_TPLINK_FW is not set
|
2013-11-04 18:37:08 +00:00
|
|
|
# CONFIG_MTD_TPLINK_PARTS is not set
|
|
|
|
|
CONFIG_MTD_UBI=y
|
|
|
|
|
CONFIG_MTD_UBI_BEB_LIMIT=20
|
2014-06-11 13:00:04 +00:00
|
|
|
CONFIG_MTD_UBI_BLOCK=y
|
2013-11-04 18:37:08 +00:00
|
|
|
# CONFIG_MTD_UBI_FASTMAP is not set
|
2014-06-11 13:00:04 +00:00
|
|
|
# CONFIG_MTD_UBI_GLUEBI is not set
|
2013-11-04 18:37:08 +00:00
|
|
|
CONFIG_MTD_UBI_WL_THRESHOLD=4096
|
|
|
|
|
# CONFIG_RTL8306_PHY is not set
|
|
|
|
|
# CONFIG_RTL8366_SMI is not set
|
|
|
|
|
# CONFIG_SOC_AR71XX is not set
|
|
|
|
|
# CONFIG_SOC_AR724X is not set
|
|
|
|
|
# CONFIG_SOC_AR913X is not set
|
2017-01-27 15:42:37 +00:00
|
|
|
# CONFIG_SOC_AR933X is not set
|
|
|
|
|
# CONFIG_SOC_QCA953X is not set
|
|
|
|
|
# CONFIG_SOC_QCA956X is not set
|
2014-06-11 13:00:04 +00:00
|
|
|
CONFIG_UBIFS_FS=y
|
|
|
|
|
# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
|
2017-07-03 17:51:13 +00:00
|
|
|
CONFIG_UBIFS_FS_LZO=y
|
|
|
|
|
CONFIG_UBIFS_FS_ZLIB=y
|
|
|
|
|
CONFIG_ZLIB_DEFLATE=y
|
|
|
|
|
CONFIG_ZLIB_INFLATE=y
|
