openwrt/target/linux/generic/backport-6.1/795-v6.3-05-r8152-reduce-the-control-transfer-of-rtl8152_get_ver.patch

47 lines
1.5 KiB
Diff
Raw Normal View History

kernel: backport fixes for realtek r8152 Fixes issues with RTL8156 2.5G USB adapters - # ethtool eth1 Settings for eth1: Supported ports: [ ] Supported link modes: Not reported Supported pause frame use: No Supports auto-negotiation: No Supported FEC modes: Not reported Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Advertised FEC modes: Not reported Speed: 2500Mb/s Duplex: Half Port: Twisted Pair PHYAD: 0 Transceiver: internal Auto-negotiation: off MDI-X: Unknown Current message level: 0x00000007 (7) drv probe link Link detected: yes - # - r8152: break the loop when the budget is exhausted - r8152: Block future register access if register access fails - r8152: Rename RTL8152_UNPLUG to RTL8152_INACCESSIBLE - r8152: add vendor/device ID pair for D-Link DUB-E250 - r8152: try to use a normal budget - r8152: set bp in bulk - r8152: adjust generic_ocp_write function - r8152: fix the autosuspend doesn't work - r8152: Add __GFP_NOWARN to big allocations - r8152: reduce the control transfer of rtl8152_get_version() - r8152: remove rtl_vendor_mode function - r8152: avoid to change cfg for all devices - r8152: add USB device driver for config selection - r8152: use napi_gro_frags - cdc_ether: no need to blacklist any r8152 devices - cdc_ether: add u-blox 0x1313 composition Build system: x86_64 Build-tested: bcm2711, rockchip, x86/64 Run-tested: bcm2711/RPi4B, rockchip/nanopi r2s, x86/64 Signed-off-by: Marty Jones <mj8263788@gmail.com>
2023-11-28 18:27:18 +00:00
From 02767440e1dda9861a11ca1dbe0f19a760b1d5c2 Mon Sep 17 00:00:00 2001
From: Hayes Wang <hayeswang@realtek.com>
Date: Thu, 19 Jan 2023 15:40:43 +0800
Subject: [PATCH] r8152: reduce the control transfer of rtl8152_get_version()
Reduce the control transfer by moving calling rtl8152_get_version() in
rtl8152_probe(). This could prevent from calling rtl8152_get_version()
for unnecessary situations. For example, after setting config #2 for the
device, there are two interfaces and rtl8152_probe() may be called
twice. However, we don't need to call rtl8152_get_version() for this
situation.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
---
drivers/net/usb/r8152.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -9624,20 +9624,21 @@ static int rtl8152_probe(struct usb_inte
const struct usb_device_id *id)
{
struct usb_device *udev = interface_to_usbdev(intf);
- u8 version = rtl8152_get_version(intf);
struct r8152 *tp;
struct net_device *netdev;
+ u8 version;
int ret;
- if (version == RTL_VER_UNKNOWN)
- return -ENODEV;
-
if (intf->cur_altsetting->desc.bInterfaceClass != USB_CLASS_VENDOR_SPEC)
return -ENODEV;
if (!rtl_check_vendor_ok(intf))
return -ENODEV;
+ version = rtl8152_get_version(intf);
+ if (version == RTL_VER_UNKNOWN)
+ return -ENODEV;
+
usb_reset_device(udev);
netdev = alloc_etherdev(sizeof(struct r8152));
if (!netdev) {