openwrt/target/linux/ath79/dts/ar7242_ubnt_edgeswitch-8xp.dts

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

#include "ar7242.dtsi"

/ {
	compatible = "ubnt,edgeswitch-8xp", "qca,ar7242";
	model = "Ubiquiti EdgeSwitch 8XP";

	chosen {
		bootargs = "console=ttyS0,115200n8";
	};

	aliases {
		led-boot = &led_usr;
		led-failsafe = &led_usr;
		led-running = &led_usr;
		led-upgrade = &led_usr;
	};

	leds {
		compatible = "gpio-leds";

		led_usr: usr {
			label = "ubnt:yellow:usr";
			gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
		};
	};

	keys {
		compatible = "gpio-keys";

		reset {
			linux,code = <KEY_RESTART>;
			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
			debounce-interval = <60>;
		};
	};

	gpio_spi {
		compatible = "spi-gpio";
		#address-cells = <0x1>;
		ranges;

		sck-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
		mosi-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
		cs-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
		num-chipselects = <1>;

		gpio_hc595: gpio_spi@0 {
			compatible = "fairchild,74hc595";
			reg = <0>;
			registers-number = <2>;
			spi-max-frequency = <100000>;
			enable-gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;

			gpio-controller;
			#gpio-cells = <2>;
		};
	};

	gpio-export {
		compatible = "gpio-export";

		poe_24v_port1 {
			gpio-export,name = "ubnt:24v-poe:port1";
			gpio-export,output = <0>;
			gpios = <&gpio_hc595 1 GPIO_ACTIVE_HIGH>;
		};

		poe_48v_port1 {
			gpio-export,name = "ubnt:48v-poe:port1";
			gpio-export,output = <0>;
			gpios = <&gpio_hc595 0 GPIO_ACTIVE_HIGH>;
		};

		poe_24v_port2 {
			gpio-export,name = "ubnt:24v-poe:port2";
			gpio-export,output = <0>;
			gpios = <&gpio_hc595 3 GPIO_ACTIVE_HIGH>;
		};

		poe_48v_port2 {
			gpio-export,name = "ubnt:48v-poe:port2";
			gpio-export,output = <0>;
			gpios = <&gpio_hc595 2 GPIO_ACTIVE_HIGH>;
		};

		poe_24v_port3 {
			gpio-export,name = "ubnt:24v-poe:port3";
			gpio-export,output = <0>;
			gpios = <&gpio_hc595 5 GPIO_ACTIVE_HIGH>;
		};

		poe_48v_port3 {
			gpio-export,name = "ubnt:48v-poe:port3";
			gpio-export,output = <0>;
			gpios = <&gpio_hc595 4 GPIO_ACTIVE_HIGH>;
		};

		poe_24v_port4 {
			gpio-export,name = "ubnt:24v-poe:port4";
			gpio-export,output = <0>;
			gpios = <&gpio_hc595 7 GPIO_ACTIVE_HIGH>;
		};

		poe_48v_port4 {
			gpio-export,name = "ubnt:48v-poe:port4";
			gpio-export,output = <0>;
			gpios = <&gpio_hc595 6 GPIO_ACTIVE_HIGH>;
		};

		poe_24v_port5 {
			gpio-export,name = "ubnt:24v-poe:port5";
			gpio-export,output = <0>;
			gpios = <&gpio_hc595 9 GPIO_ACTIVE_HIGH>;
		};

		poe_48v_port5 {
			gpio-export,name = "ubnt:48v-poe:port5";
			gpio-export,output = <0>;
			gpios = <&gpio_hc595 8 GPIO_ACTIVE_HIGH>;
		};

		poe_24v_port6 {
			gpio-export,name = "ubnt:24v-poe:port6";
			gpio-export,output = <0>;
			gpios = <&gpio_hc595 11 GPIO_ACTIVE_HIGH>;
		};

		poe_48v_port6 {
			gpio-export,name = "ubnt:48v-poe:port6";
			gpio-export,output = <0>;
			gpios = <&gpio_hc595 10 GPIO_ACTIVE_HIGH>;
		};

		poe_24v_port7 {
			gpio-export,name = "ubnt:24v-poe:port7";
			gpio-export,output = <0>;
			gpios = <&gpio_hc595 13 GPIO_ACTIVE_HIGH>;
		};

		poe_48v_port7 {
			gpio-export,name = "ubnt:48v-poe:port7";
			gpio-export,output = <0>;
			gpios = <&gpio_hc595 12 GPIO_ACTIVE_HIGH>;
		};

		poe_24v_port8 {
			gpio-export,name = "ubnt:24v-poe:port8";
			gpio-export,output = <0>;
			gpios = <&gpio_hc595 15 GPIO_ACTIVE_HIGH>;
		};

		poe_48v_port8 {
			gpio-export,name = "ubnt:48v-poe:port8";
			gpio-export,output = <0>;
			gpios = <&gpio_hc595 14 GPIO_ACTIVE_HIGH>;
		};
	};
};

&spi {
	status = "okay";

	num-cs = <1>;

	flash@0 {
		compatible = "jedec,spi-nor";
		reg = <0>;
		spi-max-frequency = <25000000>;

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			partition@0 {
				reg = <0x000000 0x040000>;
				label = "u-boot";
				read-only;
			};

			partition@40000 {
				reg = <0x040000 0x010000>;
				label = "u-boot-env";
				read-only;
			};

			partition@50000 {
				compatible = "denx,uimage";
				reg = <0x050000 0x760000>;
				label = "firmware";
			};

			partition@7b0000 {
				reg = <0x7b0000 0x040000>;
				label = "cfg";
				read-only;
			};

			art: partition@7f0000 {
				reg = <0x7f0000 0x010000>;
				label = "art";
				read-only;
			};
		};
	};
};

&mdio0 {
	status = "okay";

	phy-mask = <0x10>;

	ethernet-switch@1e {
		compatible = "brcm,bcm53128";
		#address-cells = <1>;
		#size-cells = <0>;
		reg = <0x1e>;

		ports {
			port0@0 {
				reg = <0>;
				label = "lan1";
			};

			port1@1 {
				reg = <1>;
				label = "lan2";
			};

			port2@2 {
				reg = <2>;
				label = "lan3";
			};

			port3@3 {
				reg = <3>;
				label = "lan4";
			};

			port4@4 {
				reg = <4>;
				label = "lan5";
			};

			port5@5 {
				reg = <5>;
				label = "lan6";
			};

			port6@6 {
				reg = <6>;
				label = "lan7";
			};

			port7@7 {
				reg = <7>;
				label = "lan8";
			};

			phy0: port8@8 {
				reg = <8>;
				label = "cpu";
				ethernet = <&eth0>;

				fixed-link {
					speed = <1000>;
					full-duplex;
				};
			};

		};
	};
};

&usb_phy {
	status = "okay";
};

&usb {
	#address-cells = <1>;
	#size-cells = <0>;
	status = "okay";

	hub_port: port@1 {
		reg = <1>;
		#trigger-source-cells = <0>;
	};
};

&pcie {
	status = "okay";
};

&uart {
	status = "okay";
};

&eth0 {
	status = "okay";

	phy-mode = "rgmii-rxid";
	pll-data = <0x16000000 0x00000101 0x00001313>;
	mtd-mac-address = <&art 0x0>;

	phy-handle = <&phy0>;
	fixed-link {
		speed = <1000>;
		full-duplex;
	};
};

&eth1 {
	status = "okay";

	mtd-mac-address = <&art 0x6>;
};