openwrt/target/linux/generic/backport-4.19/462-v5.3-mtd-spinand-Add-support-for-GigaDevice-GD5F1GQ4UFxxG.patch

IMPORTANT NOTE
==============

The content of this patch has been adapted for Linux 4.19

Changes were made in Linux 5.x to add the bad-block limit
to the metadata available to the driver, adding a parameter

NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1),
                                     ^- New bad-block limit

This patch omits that parameter from the upstream patch
for compatibility with the Linux 4.19 driver.

=====

From 049df13c4e63884fe6634db5568e08f65922256e Mon Sep 17 00:00:00 2001
From: Jeff Kletsky <git-commits@allycomm.com>
Date: Wed, 22 May 2019 15:05:55 -0700
Subject: [PATCH 3/3] mtd: spinand: Add support for GigaDevice GD5F1GQ4UFxxG

The GigaDevice GD5F1GQ4UFxxG SPI NAND is in current production devices
and, while it has the same logical layout as the E-series devices,
it differs in the SPI interfacing in significant ways.

This support is contingent on previous commits to:

  * Add support for two-byte device IDs
  * Define macros for page-read ops with three-byte addresses

http://www.gigadevice.com/datasheet/gd5f1gq4xfxxg/

Signed-off-by: Jeff Kletsky <git-commits@allycomm.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
 drivers/mtd/nand/spi/gigadevice.c | 79 +++++++++++++++++++++++++------
 1 file changed, 64 insertions(+), 15 deletions(-)

--- a/drivers/mtd/nand/spi/gigadevice.c
+++ b/drivers/mtd/nand/spi/gigadevice.c
@@ -9,11 +9,17 @@
 #include <linux/mtd/spinand.h>
 
 #define SPINAND_MFR_GIGADEVICE			0xC8
+
 #define GD5FXGQ4XA_STATUS_ECC_1_7_BITFLIPS	(1 << 4)
 #define GD5FXGQ4XA_STATUS_ECC_8_BITFLIPS	(3 << 4)
 
 #define GD5FXGQ4UEXXG_REG_STATUS2		0xf0
 
+#define GD5FXGQ4UXFXXG_STATUS_ECC_MASK		(7 << 4)
+#define GD5FXGQ4UXFXXG_STATUS_ECC_NO_BITFLIPS	(0 << 4)
+#define GD5FXGQ4UXFXXG_STATUS_ECC_1_3_BITFLIPS	(1 << 4)
+#define GD5FXGQ4UXFXXG_STATUS_ECC_UNCOR_ERROR	(7 << 4)
+
 static SPINAND_OP_VARIANTS(read_cache_variants,
 		SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0),
 		SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
@@ -22,6 +28,14 @@ static SPINAND_OP_VARIANTS(read_cache_va
 		SPINAND_PAGE_READ_FROM_CACHE_OP(true, 0, 1, NULL, 0),
 		SPINAND_PAGE_READ_FROM_CACHE_OP(false, 0, 1, NULL, 0));
 
+static SPINAND_OP_VARIANTS(read_cache_variants_f,
+		SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0),
+		SPINAND_PAGE_READ_FROM_CACHE_X4_OP_3A(0, 1, NULL, 0),
+		SPINAND_PAGE_READ_FROM_CACHE_DUALIO_OP(0, 1, NULL, 0),
+		SPINAND_PAGE_READ_FROM_CACHE_X2_OP_3A(0, 1, NULL, 0),
+		SPINAND_PAGE_READ_FROM_CACHE_OP_3A(true, 0, 1, NULL, 0),
+		SPINAND_PAGE_READ_FROM_CACHE_OP_3A(false, 0, 0, NULL, 0));
+
 static SPINAND_OP_VARIANTS(write_cache_variants,
 		SPINAND_PROG_LOAD_X4(true, 0, NULL, 0),
 		SPINAND_PROG_LOAD(true, 0, NULL, 0));
@@ -59,6 +73,11 @@ static int gd5fxgq4xa_ooblayout_free(str
 	return 0;
 }
 
+static const struct mtd_ooblayout_ops gd5fxgq4xa_ooblayout = {
+	.ecc = gd5fxgq4xa_ooblayout_ecc,
+	.free = gd5fxgq4xa_ooblayout_free,
+};
+
 static int gd5fxgq4xa_ecc_get_status(struct spinand_device *spinand,
 					 u8 status)
 {
@@ -83,7 +102,7 @@ static int gd5fxgq4xa_ecc_get_status(str
 	return -EINVAL;
 }
 
-static int gd5fxgq4uexxg_ooblayout_ecc(struct mtd_info *mtd, int section,
+static int gd5fxgq4_variant2_ooblayout_ecc(struct mtd_info *mtd, int section,
 				       struct mtd_oob_region *region)
 {
 	if (section)
@@ -95,7 +114,7 @@ static int gd5fxgq4uexxg_ooblayout_ecc(s
 	return 0;
 }
 
-static int gd5fxgq4uexxg_ooblayout_free(struct mtd_info *mtd, int section,
+static int gd5fxgq4_variant2_ooblayout_free(struct mtd_info *mtd, int section,
 					struct mtd_oob_region *region)
 {
 	if (section)
@@ -108,6 +127,11 @@ static int gd5fxgq4uexxg_ooblayout_free(
 	return 0;
 }
 
+static const struct mtd_ooblayout_ops gd5fxgq4_variant2_ooblayout = {
+	.ecc = gd5fxgq4_variant2_ooblayout_ecc,
+	.free = gd5fxgq4_variant2_ooblayout_free,
+};
+
 static int gd5fxgq4uexxg_ecc_get_status(struct spinand_device *spinand,
 					u8 status)
 {
@@ -150,15 +174,25 @@ static int gd5fxgq4uexxg_ecc_get_status(
 	return -EINVAL;
 }
 
-static const struct mtd_ooblayout_ops gd5fxgq4xa_ooblayout = {
-	.ecc = gd5fxgq4xa_ooblayout_ecc,
-	.free = gd5fxgq4xa_ooblayout_free,
-};
+static int gd5fxgq4ufxxg_ecc_get_status(struct spinand_device *spinand,
+					u8 status)
+{
+	switch (status & GD5FXGQ4UXFXXG_STATUS_ECC_MASK) {
+	case GD5FXGQ4UXFXXG_STATUS_ECC_NO_BITFLIPS:
+		return 0;
 
-static const struct mtd_ooblayout_ops gd5fxgq4uexxg_ooblayout = {
-	.ecc = gd5fxgq4uexxg_ooblayout_ecc,
-	.free = gd5fxgq4uexxg_ooblayout_free,
-};
+	case GD5FXGQ4UXFXXG_STATUS_ECC_1_3_BITFLIPS:
+		return 3;
+
+	case GD5FXGQ4UXFXXG_STATUS_ECC_UNCOR_ERROR:
+		return -EBADMSG;
+
+	default: /* (2 << 4) through (6 << 4) are 4-8 corrected errors */
+		return ((status & GD5FXGQ4UXFXXG_STATUS_ECC_MASK) >> 4) + 2;
+	}
+
+	return -EINVAL;
+}
 
 static const struct spinand_info gigadevice_spinand_table[] = {
 	SPINAND_INFO("GD5F1GQ4xA", 0xF1,
@@ -195,25 +229,40 @@ static const struct spinand_info gigadev
 					      &write_cache_variants,
 					      &update_cache_variants),
 		     0,
-		     SPINAND_ECCINFO(&gd5fxgq4uexxg_ooblayout,
+		     SPINAND_ECCINFO(&gd5fxgq4_variant2_ooblayout,
 				     gd5fxgq4uexxg_ecc_get_status)),
+	SPINAND_INFO("GD5F1GQ4UFxxG", 0xb148,
+		     NAND_MEMORG(1, 2048, 128, 64, 1024, 1, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants_f,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     0,
+		     SPINAND_ECCINFO(&gd5fxgq4_variant2_ooblayout,
+				     gd5fxgq4ufxxg_ecc_get_status)),
 };
 
 static int gigadevice_spinand_detect(struct spinand_device *spinand)
 {
 	u8 *id = spinand->id.data;
+	u16 did;
 	int ret;
 
 	/*
-	 * For GD NANDs, There is an address byte needed to shift in before IDs
-	 * are read out, so the first byte in raw_id is dummy.
+	 * Earlier GDF5-series devices (A,E) return [0][MID][DID]
+	 * Later (F) devices return [MID][DID1][DID2]
 	 */
-	if (id[1] != SPINAND_MFR_GIGADEVICE)
+
+	if (id[0] == SPINAND_MFR_GIGADEVICE)
+		did = (id[1] << 8) + id[2];
+	else if (id[0] == 0 && id[1] == SPINAND_MFR_GIGADEVICE)
+		did = id[2];
+	else
 		return 0;
 
 	ret = spinand_match_and_init(spinand, gigadevice_spinand_table,
 				     ARRAY_SIZE(gigadevice_spinand_table),
-				     id[2]);
+				     did);
 	if (ret)
 		return ret;