ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-27 17:18:59 +00:00
Code Issues Actions 9 Packages Projects Releases Wiki Activity
240d4b1b6e
openwrt/target/linux/ar71xx/image/mikrotik.mk

44 lines
1.5 KiB
Makefile
Raw Normal View History

ar71xx: convert mikrotik routerboard support to UBI Remove the wget2nand script, drop the need for manual installation, use sysupgrade instead. There are now two different NAND images, one for 64 MiB flashes, the other for >= 128 MiB Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-08 13:27:38 +00:00
define Device/mikrotik
PROFILES := Default
ar71xx: enable nand-utils in the mikrotik subtarget to ensure it makes it to initramfs Without it, sysupgrade from initramfs to nand fails Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-05-12 11:28:56 +00:00
DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport
ar71xx: convert mikrotik routerboard support to UBI Remove the wget2nand script, drop the need for manual installation, use sysupgrade instead. There are now two different NAND images, one for 64 MiB flashes, the other for >= 128 MiB Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-08 13:27:38 +00:00
BOARD_NAME := routerboard
KERNEL_INITRAMFS :=
KERNEL_NAME := loader-generic.elf
KERNEL := kernel-bin | kernel2minor -s 2048 -e -c
FILESYSTEMS := squashfs
IMAGES := sysupgrade.bin
IMAGE/sysupgrade.bin := sysupgrade-tar
endef
define Device/nand-64m
ar71xx: image: fix indentation Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2017-03-22 19:36:22 +00:00
$(Device/mikrotik)
ar71xx: image: mikrotik: shorten DEVICE_TITLE Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2017-06-10 11:48:34 +00:00
DEVICE_TITLE := MikroTik RouterBoard (64 MB NAND)
ar71xx: convert mikrotik routerboard support to UBI Remove the wget2nand script, drop the need for manual installation, use sysupgrade instead. There are now two different NAND images, one for 64 MiB flashes, the other for >= 128 MiB Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-08 13:27:38 +00:00
KERNEL := kernel-bin | kernel2minor -s 512 -e -c
endef
define Device/nand-large
ar71xx: image: fix indentation Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2017-03-22 19:36:22 +00:00
$(Device/mikrotik)
ar71xx: image: mikrotik: shorten DEVICE_TITLE Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2017-06-10 11:48:34 +00:00
DEVICE_TITLE := MikroTik RouterBoard (>= 128 MB NAND)
ar71xx: convert mikrotik routerboard support to UBI Remove the wget2nand script, drop the need for manual installation, use sysupgrade instead. There are now two different NAND images, one for 64 MiB flashes, the other for >= 128 MiB Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-08 13:27:38 +00:00
KERNEL := kernel-bin | kernel2minor -s 2048 -e -c
endef
TARGET_DEVICES += nand-64m nand-large
ar71xx: add support for RB-941-2nD Add full support for Mikrotik RB-941-2nD (hAP lite) Original patch by Sergey Sergeev <adron@yapic.net> and more information is available here: https://wiki.openwrt.org/toh/mikrotik/rb941_2nd I updated and adapted the patch to apply cleanly to LEDE trunk and added proper numbering for the switch ports (matching case labels). Tested working on actual hardware with the information provided in the above webpage. Sysupgrade works. Signed-off-by: Thibaut VARENE <hacks@slashdirt.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-04 21:44:54 +00:00
define Device/rb-nor-flash-16M
ar71xx: image: mikrotik: shorten DEVICE_TITLE Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2017-06-10 11:48:34 +00:00
DEVICE_TITLE := MikroTik RouterBoard (16 MB SPI NOR)
ar71xx: enable nand-utils in the mikrotik subtarget to ensure it makes it to initramfs Without it, sysupgrade from initramfs to nand fails Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-05-12 11:28:56 +00:00
DEVICE_PACKAGES := rbcfg rssileds -nand-utils
ar71xx: add support for RB-941-2nD Add full support for Mikrotik RB-941-2nD (hAP lite) Original patch by Sergey Sergeev <adron@yapic.net> and more information is available here: https://wiki.openwrt.org/toh/mikrotik/rb941_2nd I updated and adapted the patch to apply cleanly to LEDE trunk and added proper numbering for the switch ports (matching case labels). Tested working on actual hardware with the information provided in the above webpage. Sysupgrade works. Signed-off-by: Thibaut VARENE <hacks@slashdirt.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-04 21:44:54 +00:00
IMAGE_SIZE := 16000k
LOADER_TYPE := elf
KERNEL_INSTALL := 1
ar71xx: Enable mtdsplit support for RB SPI NOR devices This patch enables mtdsplit for the MikroTik subtarget. It converts mach-rbspi.c to use a single "firmware" partition. Finally, it converts the SPI NOR profile to metadata images: the original combined-image format is gone, the images are now "standard" sysupgrade images with metadata appended. Note: kernel2minor apparently pads the kernel container to erase-block boundary, but this is undocumented behaviour, so we do not rely on it and call pad-to anyway. Note: in platform.sh, the boards are tested last in platform_check_image() as this should eventually become the "*)" default case when more devices switch to metadata images. Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
2017-02-15 10:40:06 +00:00
KERNEL := kernel-bin | lzma | loader-kernel
ar71xx: add support for Mikrotik RB750P-PBr2 Specifications: - SoC: Qualcomm QCA9531 (650MHz) - RAM: 64MB - Storage: 16MB NOR SPI flash - Ethernet: 5x100M (1 PoE in, 4 PoE out) - Outdoor use ready This ethernet router is based on the same platform as the hEX PoE lite. Installation 1. login to the Mikrotik WebUI to backup your licence keys 2. setup a DHCP/BOOTP Server with: * DHCP-Option 66 (TFTP server name) pointing to a local TFTP Server within the same subnet of the DHCP range * DHCP-Option 67 (Bootfile-Name) matching the initramfs filename of the to be booted image 3. connect the port labled internet to your local network 4. keep the reset button pushed down and power on the board The board should load and start the initramfs image from the TFTP Server. Login as root/without password to the started LEDE via ssh listing on IPv4 address 192.168.1.1. Use sysupgrade to install LEDE. Revert to RouterOS Use the "rbcfg" package on in LEDE: * rbcfg set boot_protocol bootp * rbcfg set boot_device ethnand * rbcfg apply Open Netinstall and reboot routerboard. Now netinstall sees routerboard and you can install RouterOS. If NetInstall gets stuck on Sending offer just wait for it to timeout and then close and open Netinstall again. Click on install again. In order for RouterOS to function properly, you need to restore license for the device. You can do that by including license in NetInstall Signed-off-by: Robert Marko <robimarko@gmail.com>
2017-10-05 12:26:23 +00:00
SUPPORTED_DEVICES := rb-750-r2 rb-750up-r2 rb-750p-pbr2 rb-941-2nd rb-951ui-2nd rb-952ui-5ac2nd rb-962uigs-5hact2hnt rb-lhg-5nd rb-mapl-2nd
ar71xx: image: use simply expanded variables Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2017-06-08 13:18:34 +00:00
IMAGE/sysupgrade.bin := append-kernel | kernel2minor -s 1024 -e | pad-to $$$$(BLOCKSIZE) | \
ar71xx: Enable mtdsplit support for RB SPI NOR devices This patch enables mtdsplit for the MikroTik subtarget. It converts mach-rbspi.c to use a single "firmware" partition. Finally, it converts the SPI NOR profile to metadata images: the original combined-image format is gone, the images are now "standard" sysupgrade images with metadata appended. Note: kernel2minor apparently pads the kernel container to erase-block boundary, but this is undocumented behaviour, so we do not rely on it and call pad-to anyway. Note: in platform.sh, the boards are tested last in platform_check_image() as this should eventually become the "*)" default case when more devices switch to metadata images. Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
2017-02-15 10:40:06 +00:00
append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
ar71xx: add support for RB-941-2nD Add full support for Mikrotik RB-941-2nD (hAP lite) Original patch by Sergey Sergeev <adron@yapic.net> and more information is available here: https://wiki.openwrt.org/toh/mikrotik/rb941_2nd I updated and adapted the patch to apply cleanly to LEDE trunk and added proper numbering for the switch ports (matching case labels). Tested working on actual hardware with the information provided in the above webpage. Sysupgrade works. Signed-off-by: Thibaut VARENE <hacks@slashdirt.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-04 21:44:54 +00:00
endef
ar71xx: add support for MikroTik hAP ac lite This patch adds support for the MikroTik RouterBOARD hAP ac lite (RB952Ui-5ac2nD). The hAP ac lite is nearly identical to the hAP, with an added QCA9887 5GHz radio. The 2.4GHz radio ID is also changed in the hAP ac lite. Signed-off-by: Ryan Mounce <ryan@mounce.com.au>
2017-03-08 09:07:00 +00:00
define Device/rb-nor-flash-16M-ac
$(Device/rb-nor-flash-16M)
ar71xx: image: mikrotik: shorten DEVICE_TITLE Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2017-06-10 11:48:34 +00:00
DEVICE_TITLE := MikroTik RouterBoard (16 MB SPI NOR, 802.11ac)
ar71xx: add support for MikroTik hAP ac lite This patch adds support for the MikroTik RouterBOARD hAP ac lite (RB952Ui-5ac2nD). The hAP ac lite is nearly identical to the hAP, with an added QCA9887 5GHz radio. The 2.4GHz radio ID is also changed in the hAP ac lite. Signed-off-by: Ryan Mounce <ryan@mounce.com.au>
2017-03-08 09:07:00 +00:00
DEVICE_PACKAGES += kmod-ath10k ath10k-firmware-qca988x ath10k-firmware-qca9887
endef
TARGET_DEVICES += rb-nor-flash-16M rb-nor-flash-16M-ac
Reference in New Issue Copy Permalink