openwrt/target/linux/bcm27xx/patches-5.15/950-0364-media-i2c-ov9281-Read-chip-ID-via-2-reads.patch

From 18e32b190c3e58cba734073706d5ff0fcd7cbba3 Mon Sep 17 00:00:00 2001
From: Dave Stevenson <dave.stevenson@raspberrypi.com>
Date: Mon, 6 Jul 2020 17:51:32 +0100
Subject: [PATCH] media: i2c: ov9281: Read chip ID via 2 reads

Vision Components have made an OV9281 module which blocks reading
back the majority of registers to comply with NDAs, and in doing
so doesn't allow auto-increment register reading as used when
reading the chip ID.

Use two reads and manually combine the results.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
---
 drivers/media/i2c/ov9281.c | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

--- a/drivers/media/i2c/ov9281.c
+++ b/drivers/media/i2c/ov9281.c
@@ -904,13 +904,17 @@ static int ov9281_check_sensor_id(struct
 				  struct i2c_client *client)
 {
 	struct device *dev = &ov9281->client->dev;
-	u32 id = 0;
+	u32 id = 0, id_msb;
 	int ret;
 
-	ret = ov9281_read_reg(client, OV9281_REG_CHIP_ID,
-			      OV9281_REG_VALUE_16BIT, &id);
-	if (id != CHIP_ID) {
-		dev_err(dev, "Unexpected sensor id(%06x), ret(%d)\n", id, ret);
+	ret = ov9281_read_reg(client, OV9281_REG_CHIP_ID + 1,
+			      OV9281_REG_VALUE_08BIT, &id);
+	if (!ret)
+		ret = ov9281_read_reg(client, OV9281_REG_CHIP_ID,
+				      OV9281_REG_VALUE_08BIT, &id_msb);
+	id |= (id_msb << 8);
+	if (ret || id != CHIP_ID) {
+		dev_err(dev, "Unexpected sensor id(%04x), ret(%d)\n", id, ret);
 		return -ENODEV;
 	}